Study on Identification and Fermentation Condition of Strain ZY-19-2 with Inhibitory Effect against Tobacco Black Shank (Phytophtora parasitica var. nicotianae Tucker)

[Objective] The paper was to identify stain ZY-19-2 with inhibitory effect against tobacco black shank （Phytophtora parasitica var.nicotianae Tucker）, and study the fermentation condition of the strain. [Method]A strain ZY-19-2 with strong inhibitory effect against P. parasitica were isolated and screened from tobacco rhizosphere soil samples, and identified according to its morphological characteristics. The chitinase production activity of the strain under different culture conditions was also studied. [Result] For stain ZY-19-2 Paecilomyces lilacinus, the optimal fermentation conditions were as follows： 1.2% colloidal chitin as carbon source, 1% peptone as nitrogen source, 0.1% Tween 80 as surfactant, initial pH of fermentation broth at 6.0, the fermentation time of 60 h, inoculum amount at 1%, shaker speed at 120 r/min. The highest enzyme activity reached 0.216 U/ml. [Conclusion]The optimization of fermentation condition of strain ZY-19-2 lay foundation for large-scale production of cheap and efficient chitinase and chitin oligosaccharides, as well as application of the strain for control of tobacco black shank.

Investigation on the choice of boundary conditions and shape functions for flexible multi-body system

The objective of this investigation is to examine the correctness and efficiency of the choice of boundary conditions when using assumed mode approach to simulate flexible multi-body systems. The displacement field due to deformation is approximated by the Rayleigh-Ritz assumed modes in floating frame of reference （FFR） formulation. The deformations obtained by the absolute nodal coordinate （ANC） formulation which are transformed by two sets of reference coordinates are introduced as a criterion to verify the accuracy of the simulation results by using the FFR formulation. The relationship between the deformations obtained from different boundary conditions is revealed. Nu- merical simulation examples demonstrate that the assumed modes with cantilevered-free, simply-supported and free- free boundary conditions without inclusion of rigid body modes are suitable for simulation of flexible multi-body system with large over all motion, and the same physical deformation can be obtained using those mode functions, differ only by a coordinate transformation. It is also shown that when using mode shapes with statically indeterminate boundary conditions, significant error may occur. Furthermore, the slider crank mechanism with rigid crank is accurate enough for investigating boundary condition problem of flexible multi-body system, which cost significant less simulating time.

Yield strength prediction of rolled Al-(1.44-12.40)Si-0.7Mg alloy sheets under T4 condition

The effects of Si content on the microstructure and yield strength of Al-(1.44-12.40)Si-0.7 Mg(wt.%)alloy sheets under the T4 condition were systematically studied via laser scanning confocal microscopy(LSCM),DSC,TEM and tensile tests.The results show that the recrystallization grain of the alloy sheets becomes more refined with an increase in Si content.When the Si content increases from 1.44 to 12.4 wt.%,the grain size of the alloy sheets decreases from approximately 47 to 10μm.Further,with an increase in Si content,the volume fraction of the GP zones in the matrix increases slightly.Based on the existing model,a yield strength model for alloy sheets was proposed.The predicted results are in good agreement with the actual experimental results and reveal the strengthening mechanisms of the Al-(1.44-12.40)Si-0.7 Mg alloy sheets under the T4 condition and how they are influenced by the Si content.

Global optimality conditions for quadratic 0-1 programming with inequality constraints

Quadratic 0-1 problems with linear inequality constraints are briefly considered in this paper.Global optimality conditions for these problems,including a necessary condition and some sufficient conditions,are presented.The necessary condition is expressed without dual variables.The relations between the global optimal solutions of nonconvex quadratic 0-1 problems and the associated relaxed convex problems are also studied.

Neural stem cell-conditioned medium upregulated the PCMT1 expression and inhibited the phosphorylation of MST1 in SHSY5Y cells induced by Aβ_(25-35)

A progressive neurodegenerative disease,Alzheimer’s disease(AD).Studies suggest that highly expressed protein isoaspartate methyltransferase 1(PCMT1)in brain tissue.In the current study,we explored the effects of neural stem cell-conditioned medium(NSC-CDM)on the PCMT1/MST1 pathway to alleviate Aβ_(25-35)-induced damage in SH-SY5Y cells.Our data suggested that Aβ_(25-35) markedly inhibited cell viability.NSC-CDM or Neural stem cell-complete medium(NSC-CPM)had a suppression effect on toxicity when treatment with Aβ_(25-35),with a greater effect observed with NSC-CDM.Aβ_(25-35)+NSC-CDM group exhibited an increase in PCMT1 expression.sh-PCMT1 markedly decreased cell proliferation and suppressed the protective role of NSC-CDM through the induction of apoptosis and improved p-MST1 expression.Overexpression of PCMT1 reversed the Aβ_(25-35)-induced decrease in cell proliferation and apoptosis.In summary,our findings suggest that NSC-CDM corrects the Aβ_(25-35)-induced damage to cells by improving PCMT1 expressions,which in turn reduces phosphorylation of MST1.

The Forming Conditions of and Ore-searching Direction for B, Mg,Pb, Zn and Au Deposits in the Liaoji Proterozoic Rift

The Liaoji Proterozoic rift is an inter-intracontinenatl rift developed from Archean granite-greenstone tectonic regime and contains many important mineral deposits of U, B, magnesite, Pb-Zn, Au, Ag, Co and P. These deposits were formed as the result of late mobilization, transportation and concentfation of the previously enriched ore-forming mate- rials in several ore-bearing formations formed during the rift stage. So the metallogeny of these deposits in the rift shows both inheritance and new generation of the ore-forming materials. In future ore-searching practice, attentions should be paid on the studies of the ore-bearing formations in the rift, on the multiple stages of metallogeny and and on multiple derivations of the ore-forming materials.

Modeling of fine coal flotation separation based on particle characteristics and hydrodynamic conditions

Flotation is a complex multifaceted process that is widely used for the separation of finely ground minerals. The theory of froth flotation is complex and is not completely understood. This fact has been brought many monitoring challenges in a coal processing plant. To solve those challenges, it is important to understand the effect of different parameters on the fine particle separation, and control flotation performance for a particular system. This study is going to indicate the effect of various parameters （particle Characteristics and hydrodynamic conditions） on coal flotation responses （flotation rate constant and recovery） by different modeling techniques. A comprehensive coal flotation database was prepared for the statistical and soft computing methods. Statistical factors were used for variable selections. Results were in a good agreement with recent theoretical flotation investigations. Computational models accurately can estimate flotation rate constant and coal recovery （correlation coefficient 0.85, and 0.99, respectively）. According to the results, it can be concluded that the soft computing models can overcome the complexity of process and be used as an expert system to control, and optimize parameters of coal flotation process.

Online Condition Monitoring of Gripper Cylinder in TBM Based on EMD Method

The gripper cylinder that provides braced force for Tunnel Boring Machine （TBM） might fail due to severe vibration when the TBM excavates in the tunnel. Early fault diagnosis of the gripper cylinder is important for the safety and efficiency of the whole tunneling project. In this paper, an online condition monitoring system based on the Empirical Mode Decomposition （EMD） method is estab- lished for fault diagnosis of the gripper cylinder while TBM is working. Firstly, the lumped mass parameter model of the gripper cylinder is established considering the influence of the variable stiffness at the rock interface, the equivalent stiffness of the oil, the seals, and the copper guide sleeve. The dynamic performance of the gripper cylinder is investigated to provide basis for its health condition evaluation. Then, the EMD method is applied to identify the characteristic frequencies of the gripper cylinder for fault diagnosis and a field test is used to verify the accuracy of the EMD method for detection of the characteristic frequencies. Furthermore, the contact stiff- ness at the interface between the barrel and the rod is calculated with Hertz theory and the relationship between the natural frequency and the stiffness varying with the health condition of the cylinder is simulated based on the dynamic model. The simulation shows that the character- istic frequencies decrease with the increasing clearance between the barrel and the rod, thus the defects could be indicated by monitoring the natural frequency. Finally, a health condition management system of the gripper cylin- der based on the vibration signal and the EMD method is established, which could ensure the safety of TBM.

Solve the Polynomial Functions Conditional Extreme by Applying the Groebner Basis Method

In this paper, an algebraic method which is based on the groebner bases theory is proposed to solve the polynomial functions conditional extreme. Firstly, we describe how to solve conditional extreme value problems by establishing Lagrange functions and calculating the differential equations derived from the Lagrange functions. Then, by solving the single variable polynomials in the groebner basis, the solution of polynomial equations could be derived successively. We overcome the high number of variables and constraints in the extreme value problem. Finally, this paper illustrates the calculation process of this method through the general procedures and examples in solving questions of conditional extremum of polynomial function.

“三全育人”理念下“数学分析”教学案例——以《条件极值》为例

本文以“数学分析”中的条件极值为例,在课堂教学设计过程中,引导学生以问题驱动的形式思考和分析问题,融入思政元素,将知识点与辩证思想联系起来,践行“三全育人”理念,提高学生分析问题和解决问题的能力,逐步培养学生理论联系实际的能力。

一类具有混合边界条件的初边值问题解的Blow-up

利用非线性抛物型方程的极大值原理 ,讨论了一类具有混合边界条件的初边值问题的解的Blow up ,并得到了Blow up时间T的一个上界 .

气象观测场在汽车试验场中的应用研究

汽车试验场作为汽车开展道路测试的重要场所,用于验证汽车产品的品质以及可靠性。除了场地道路外,气象条件作为汽车道路测试的重要一环,在《GB/T12534-1990汽车道路试验方法通则》中也有明确要求,如:试验时应是无雨无雾天气,相对湿度小于95%,气温0-40℃,风速不大于3m/s。同时气象条件也作为试验场道路管控的重要依据,实时风速、雨量、能见度等信息为场地管理者发布限速、限行、封场等通知提供必要参考依据,直接影响道路测试安全管控的及时性。因此,文章从气象观测场的建设、气象服务、异常天气道路管控等方面开展气象观测场在汽车试验场中的应用研究。

Relationship of microstructure transformation and hardening behavior of type 17-4 PH stainless steel

The relationship between the microstructure transformation of type 17-4 PH stainless steel and the aging hardening behavior was investigated. The results showed that, when 17-4 PH stainless steel aging at 595℃, the bulk hardness of samples attains its peak value （42.5 HRC） for about 20 min, and then decreases at all time. TEM revealed the microstructure corresponding with peak hardness is that the fine spheroid-shape copper with the fcc crystal structure and the fiber-shape secondary carbide M23C6 precipitated from the lath martensite matrix. Both precipitations of copper and M23C6 are the reasons for strengthening of the alloy at this temperature. With the extension of holding time at this temperature, the copper and secondary carbide grow and lose the coherent relationship with the matrix, so the bulk hardness of samples decreases.

A unified analysis of a micro-beam,droplet and CNT ring adhered on a substrate:Calculation of variation with movable boundaries

In this study, we developed a general method to analytically tackle a kind of movable boundary problem from the viewpoint of energy variation. Having grouped the adhesion of a micro-beam, droplet and carbon nanotube （CNT） ring on a substrate into one framework, we used the developed line of reasoning to investigate the adhesion behaviors of these systems. Based upon the derived governing equations and transversality conditions, explicit solutions involving the critical parameters and morphologies for the three systems are successfully obtained, and then the parameter analogies and common characteristics of them are thor- oughly investigated. The presented method has been verified via the concept of energy release rate in fracture mechanics. Our analyses provide a new approach for exploring the mechanism of different systems with similarities as well as for understanding the unity of nature. The analysis results may be beneficial for the design of nano-structured materi- als, and hold potential for enhancing their mechanical, chemical, optical and electronic properties.

A, ■-Ω METHOD FOR 3-D EDDY CURRENT ANALYSIS

After the field equations and the snonumuoo conditions between the interfaces for 3D eddy current problems Under various gauges were discussed, it was pointed cut in this paper that using the magnetic vector potential A. the electric scalar potential and Coulomb gauge △ .A = 0 in eddy current regions and using the magntetic scalar potential Ω in the non-conducting regions are more suitable. All field equations, the boundary conditions, the interface continuity conditions and the corresponding variational principle of this method are also given

A Compact Difference Scheme for Multi-point Boundary Value Problems of Heat Equations

In this paper,a compact difference scheme is established for the heat equations with multi-point boundary value conditions.The truncation error of the difference scheme is O(τ2+h^4),where t and h are the temporal step size and the spatial step size.A prior estimate of the difference solution in a weighted norm is obtained.The unique solvability,stability and convergence of the difference scheme are proved by the energy method.The theoretical statements for the solution of the difference scheme are supported by numerical examples.

Nondifferentiable Multiobjective Programming under Generalized d_I-G-Type I Invexity

To relax convexity assumptions imposed on the functions in theorems on sufficient conditions and duality,new concepts of generalized dI-G-type Ⅰ invexity were introduced for nondifferentiable multiobjective programming problems.Based upon these generalized invexity,G-Fritz-John （G-F-J） and G-Karnsh-Kuhn-Tucker （G-K-K-T） types sufficient optimality conditions were established for a feasible solution to be an efficient solution.Moreover,weak and strict duality results were derived for a G-Mond-Weir type dual under various types of generalized dI-G-type Ⅰ invexity assumptions.

On the Caginalp for a Conserve Phase-Field with a Polynomial Potentiel of Order 2<i>p</i>- 1

Our aim in this paper is to study on the Caginalp for a conserved phase-field with a polynomial potentiel of order 2p - 1. In this part, one treats the conservative version of the problem of generalized phase field. We consider a regular potential, more precisely a polynomial term of the order 2p - 1 with edge conditions of Dirichlet type. Existence and uniqueness are analyzed. More precisely, we precisely, we prove the existence and uniqueness of solutions.

代入法在条件极值中的适用条件研究

针对代入法求解条件极值产生的漏解问题,从具体事例入手进行分析,发现产生漏解的原因在于隐函数不能同解显化.结合隐函数存在定理,给出多元函数在条件限制下存在极值的充分条件,指出隐函数同解显化是使用代入法的前提条件,从而解决n(n≥3)元函数条件极值的漏解问题,为后续课程的学习奠定了基础.

Glu R2-3Y Inhibits the Acquisition and Reinstatement of Morphine-Induced Conditioned Place Preference in Rats

Accumulating evidence indicates that a-amino-3-hydroxy-5-methylisoxazole-4-propionic acid receptors（AMPARs） are involved in the relapse to abused drugs.However, the role of AMPARs containing the Glu R2 subunit in opiate addiction is still unclear. Glu R2-3Y,an interfering peptide, prevents the endocytosis of AMPARs containing the Glu R2 subunit. In this study, we explored the effect of intravenous injection of Glu R2-3Y on the acquisition, expression, and reinstatement of morphine-induced conditioned place preference（m CPP） in rats. We found that infusion of Glu R2-3Y（1.5 nmol/g） one hour before morphine during the conditioning phase inhibited the acquisition of m CPP, while an identical injection one hour before the post-conditioning test had no influence on the expression of m CPP. Injection of Glu R2-3Y（1.5 nmol/g） after m CPP extinction blocked the morphine-induced reinstatement of m CPP. Our results strongly support the hypothesis that inhibition of AMPAR endocytosis provides a new target for the treatment of opiate addiction.