Optimization of reaction conditions for the electroleaching of manganese from low-grade pyrolusite

In the present study, a response surface methodology was used to optimize the electroleaching of Mn from low-grade pyrolusite. Ferrous sulfate heptahydrate was used in this reaction as a reducing agent in sulfuric acid solutions. The effect of six process variables, including the mass ratio of ferrous sulfate heptahydrate to pyrolusite, mass ratio of sulfuric acid to pyrolusite, liquid-to-solid ratio, current density, leaching temperature, and leaching time, as well as their binary interactions, were modeled. The results revealed that the order of these factors with respect to their effects on the leaching efficiency were mass ratio of ferrous sulfate heptahydrate to pyrolusite 〉 leaching time 〉 mass ratio of sulfuric acid to pyrolusite 〉 liquid-to-solid ratio 〉 leaching temperature 〉 current density. The optimum conditions were as follows： 1.10：1 mass ratio of ferrous sulfate heptahydrate to pyrolusite, 0.9：1 mass ratio of sulfuric acid to pyrolusite, liquid-to-solid ratio of 0.7：1, current density of 947 A/m^2, leaching time of 180 min, and leaching temperature of 73°C. Under these conditions, the predicted leaching efficiency for Mn was 94.1%; the obtained experimental result was 95.7%, which confirmed the validity of the model.

Optimization of Conditions for the Extraction of Melanin from Walnut Husk

[Objective] This study was conducted optimize the conditions for the ex- traction of melanin from walnut husk. [Method] Melanin was isolated from walnut husk through alkali extraction and acid precipitation, and the factors that may influ- ence the extraction efficiency： temperature, duration, NaOH concentration and solid- liquid ratio were set at different levels. [Result] The optimal conditions for the ex- traction of melanin from walhut husk were temperature of 80 ℃, extraction duration of 120 min, NaOH concentration of 70 mol/L, and solid-liquid ratio of 1：20. [Conclu- sion] The optimal conditions for the extraction of melanin from walnut husk deter- mined in the present study will provide references for the development and utiliza- tion of natural melanin.

OPTIMALITY CONDITIONS AND DUALITY RESULTS FOR NONSMOOTH VECTOR OPTIMIZATION PROBLEMS WITH THE MULTIPLE INTERVAL-VALUED OBJECTIVE FUNCTION

In this paper, both Fritz John and Karush-Kuhn-Tucker necessary optimality conditions are established for a （weakly） LU-efficient solution in the considered nonsmooth multiobjective programming problem with the multiple interval-objective function. Further, the sufficient optimality conditions for a （weakly） LU-efficient solution and several duality results in Mond-Weir sense are proved under assumptions that the functions constituting the considered nondifferentiable multiobjective programming problem with the multiple interval- objective function are convex.

Optimization of elastolysis conditions and elastolytic kinetic analysis with elastase from Bacillus licheniformis ZJUEL31410

The solubilization of elastin by Bacillus licheniformis elastase cannot be analyzed by conventional kinetic methods because the biologically relevant substrate is insoluble and the concentration of enzyme-substrate complex has no physical meaning. In this paper we report the optimization of elastolysis conditions and analysis of elastolytic kinetics. Our results indicated that the hydrolyzing temperature and time are very important factors affecting elastolysis rate. The optimized conditions using central composite design were as follows： elastolysis temperature 50 ℃, elastase concentration 1 × 10^4 U/ml, elastin 80 mg, elastolytic time 4 h. Investigation of the effects of substrate content, elastase concentration and pH was also revealed that low or high elastin content inhibits the elastolysis process. Increasingelastase improves elastin degradation, but high elastase may change the kinetics characterization. Alkaline environment can decrease elastin degradation rate and pH may affect elastolysis by changing elastase reaction pH. To further elucidate the elastolysis process, the logistic model was used to elastolysis kinetics study showing clearly that the logistic model can reasonably explain the elastolysis process, especially under lower elastase concentration. However, there is still need for more investigations with the aid of other methods, such as biochemical and molecular methods.

THE OPTIMALITY CONDITIONS OF NONCONVEXSET-VALUED VECTOR OPTIMIZATION

The concepts of alpha-order Clarke's derivative, alpha-order Adjacent derivative and alpha-order G.Bouligand derivative of set-valued mappings are introduced, their properties are studied, with which the Fritz John optimality condition of set-valued vector optimization is established. Finally, under the assumption of pseudoconvexity, the optimality condition is proved to be sufficient.

Optimization of the operating conditions in a TiO_2/Fe_3O_4-SiO_2 photocatalytic reactor for the treatment of industrial wastewater containing Procion Red MX-5B

According to the design principle of the central composite experimental,the method of response surface analysis with three factors and three levels was adopted based on one factor test.A second-order quadratic equation for photocatalysis of Procion Red MX-5B was built.Response surface and contour were graphed with the decoloration rate of Procion Red MX-5B as the response value.Based on the analysis of the response surface plots and their corresponding contour plots,effects of pH value,irradiation time and catalyst loading were explored.By using this new method,the optimum decoloration condition was obtained as follows:pH value,1.3;irradiation time,49.9 min;catalyst loading,0.57 g/L.In the optimization,R-Squared and Adj R-Squared correlation coefficients for quadratic model were evaluated quite satisfactorily as 0.9310 and 0.8620,respectively.Under the optimum conditions established,the performance of 99.47% for color removal was experimentally reached.It was found that all factors considered have an important effect on the decolorization efficiency of Procion Red MX-5B.By the ANOVA analysis and model confirmation the optimal solution obtained using RSM was experimentally validated and credible with preferable instructional ability for experiments.

Optimality conditions in set optimization employing higher-order radial derivatives

There are two approaches of defining the solutions of a set-valued optimization problem： vector criterion and set criterion. This note is devoted to higher-order optimality conditions using both criteria of solutions for a constrained set-valued optimization problem in terms of higher-order radial derivatives. In the case of vector criterion, some optimality conditions are derived for isolated （weak） minimizers. With set criterion, necessary and sufficient optimality conditions are established for minimal solutions relative to lower set-order relation.

On Second-order Sufficient Conditions in Constrained Nonsmooth Optimization

In this paper, we establish a second-order sufficient condition for constrained optimization problems of a class of so called t-stable functions in terms of the first-order and the second-order Dini type directional derivatives. The result extends the corresponding result of [D. Bednarik and K. Pastor, Math. Program. Ser. A, 113（2008）, 283-298] to constrained optimization problems.

Enhanced exergy cost optimization of operating conditions in FCCU main fractionator

Exergy indicates the maximal energy that can do work effectively. Different from optimization of product quality or calculation of generic energy conservation in most previous studies, the application of exergy analysis and exergy cost optimization in petrochemical industry is of great economic and environmental significance. Based on the main fractionator in Jiujiang Petrochemical Complex No. 2 FCCU, an enhanced exergy cost optimization under different operating conditions by adjusting set points of temperature and valves opening degree for flow control is studied in this paper in order to reduce exergy cost and improve the quality of energy. A steadystate optimization algorithm to enhance exergy availability and an objective function comprehensively considering exergy loss are proposed. On the basis of ensuring the quality of petroleum products, the economic benefits can be improved by optimizing the controllable variables due to the fact that exergy cost is decreased.

Optimization of Extraction Conditions of Pomegranate Peel Polyphenols and Its Protective Effect on Acute Alcoholic Liver Injury in Mice

[Objectives]This study was conducted to explore the optimization of ultrasonic-assisted organic solvent extraction of pomegranate peel polyphenols(PPPs),and to study the protective effect of PPPs on acute alcoholic liver injury in mice.[Methods]The optimal extraction conditions of PPPs were determined by single factor and orthogonal experiments,and an acute alcoholic liver injury model in mice was established.Bifendate was used as the positive control group to investigate the protective effect of low,medium and high doses of PPPs on acute alcoholic liver injury.[Results]The optimum extraction process parameters were followed as 60%ethanol concentration,solid-liquid ratio of 1:40(w/v),extraction temperature of 50℃,and extraction time of 1.5 h,and the yield was 1.42%.The results of animal experiments showed that PPPs could effectively reduce the degree of alcoholic liver injury in mice,reduce the levels of serum alanine aminotransferase(ALT)and aspartate aminotransferase(AST),and reduce the inflammation and necrosis of liver tissue in mice.Meanwhile,the total polyphenols from pomegranate peel also significantly reduced the expression levels of malondialdehyde(MDA),tumor necrosis factor(TNF-α)and interleukin-6(IL-6)in mice,and increased the levels of superoxide dismutase(SOD)and reduced glutathione(GSH)in liver tissue of mice,indicating its antioxidant and anti-inflammatory effects,further illustrating its protective effect on alcoholic liver injury.[Conclusions]PPPs could reduce the expression levels of TNF-α,IL-6 and MDA in mice,and increase the expression levels of SOD and GSH to achieve the protective effect on acute alcoholic liver injury in mice.This study will provide new ideas for the development of new anti-alcoholic liver injury drug resources.

Higher-order Optimality Conditions for Henig Effcient Solution in Set-valued Optimization under Cone-convexlike Maps

This paper deals with higher-order optimality conditions for Henig effcient solutions of set-valued optimization problems.By virtue of the higher-order tangent sets, necessary and suffcient conditions are obtained for Henig effcient solutions of set-valued optimization problems whose constraint condition is determined by a fixed set.

Optimization of Extraction Conditions for Total Flavonoids from Fructus Aurantii Immaturus and Its Anti-UVB Radiation Activity

[Objectives]Optimum extraction conditions of total flavonoids from Fructus Aurantii Immaturus(TFFAI)and its resistance activity to ultraviolet radiation were investigated in present research.[Methods]The optimal extraction conditions of TFFAI were determined by single factor and orthogonal experiments,and the survival rate of TFFAI on HaCaT cells irradiated with UVB rays was investigated.It s antioxidant capacity was determined by ABTS.[Results]The results showed that the highest yield of TFFAI was obtained with 70%ethanol at a solid-to-liquid ratio of 1:50(w/v)and 40℃for 1.5 h by single-factor and orthogonal experiments.Total flavonoids(0.25-1.00 mg/ml)could significantly improve the survival rate of HaCaT cell line.Meanwhile,the maximum absorption peak of TFFAI was found at 283 nm,and in-vitro antioxidant experiment identified that TFFAI had a good clearance rate to ABTS.It suggestes that TFFAI could protect the cells from UVB damage by absorption of UVB rays and anti-oxidation.[Conclusions]TFFAI played a protective role on UVB irradiated cells through UVB ultraviolet absorption and antioxidant pathways.

A Modified Lagrange Method for Solving Convex Quadratic Optimization Problems

In this paper, a modified version of the Classical Lagrange Multiplier method is developed for convex quadratic optimization problems. The method, which is evolved from the first order derivative test for optimality of the Lagrangian function with respect to the primary variables of the problem, decomposes the solution process into two independent ones, in which the primary variables are solved for independently, and then the secondary variables, which are the Lagrange multipliers, are solved for, afterward. This is an innovation that leads to solving independently two simpler systems of equations involving the primary variables only, on one hand, and the secondary ones on the other. Solutions obtained for small sized problems (as preliminary test of the method) demonstrate that the new method is generally effective in producing the required solutions.

Raoultella terrigena RtZG1 Electrical Performance Appraisal and System Optimization

The aims of this study are to provide a strain and its optimal application in electro-producting performance for revealing the electrical generating mechanism in the future.We constructed microbial fuel cells(MFCs)device that was a bipolar chamber MFC,using metal ion media(MIM)and water as anode and cathode reaction substation fluid,respectively.In this study,we identified an isolate as Raoultella terrigena,named RtZG1,which could produce electron.Also,we optimized the conditions of electrical energy generation.The continuous output current could reach about 200μA within 3 h when the ratio of electro-bacterial fluid to matrix fluid was 1∶4,the temperature was 37℃,the carbon-nitrogen ratio of the inorganic salt medium was 10∶1,as well as the concentration of MIM was 1.Based on the optimization,it is clear that the most suitable conditions of electricity production for this strain lay the foundation for the application of this strain.

Optimum conditions to treat high-concentration microparticle slime water with bioflocculants

We studied how bioflocculants,produced by white-rot fungi,affect flocculation in slime water.Based on a test in an orthogonal design,flocculation conditions were optimized.The results show that flocculation activity is at its highest when the following conditions are met:slime water concentration 27.42 g/L;coagulant aid(CaCl_2) mass concentration 5.0 g/L;two-segment stirrings:the first at a stirring speed of 60 r/min for 180 s and the second 180 r/min for 60 s;a pH of 11 and a flocculant concentration of 15 mL/L.The flocculation activity can be up to 98.71%of bioflocculants at the time.Further experiments indicate that most of the flocculation active material is found outside the mycelium cells.This is the extracellular secretion produced by mycelium cells during the fermentation process.This flocculant has strong thermal stability.Many kinds of cations have a flocculation function to assist bioflocculants.This aid-flocculation effect of the divalent cation Ca^(2+) is obvious in the bioflocculant produced by the white-rot fungus.Therefore,this is of great value when applied to control engineering in the battle against water pollution.

CONE-DIRECTED CONTINGENT DERIVATIVES AND GENERALIZED PREINVEX SET-VALUED OPTIMIZATION

By using cone-directed contingent derivatives, the unified necessary and sufficient optimality conditions are given for weakly and strongly minimal elements respectively in generalized preinvex set-valued optimization.

SECOND-ORDER OPTIMALITY CONDITIONS FOR OPTIMAL CONTROL PROBLEMS GOVERNED BY 3-DIMENSIONAL NEVIER-STOKES EQUATIONS

This article is concerned with second-order necessary and sufficient optimality conditions for optimal control problems governed by 3-dimensional Navier-Stokes equations. The periodic state constraint is considered.

ε-strongly Efficient Solutions for Vector Optimization with Set-valued Maps

In locally convex Hausdorff topological vector spaces,ε-strongly efficient solutions for vector optimization with set-valued maps are discussed.Firstly,ε-strongly efficient point of set is introduced.Secondly,under the nearly cone-subconvexlike set-valued maps,the theorem of scalarization for vector optimization is obtained.Finally,optimality conditions of ε-strongly efficient solutions for vector optimization with generalized inequality constraints and equality constraints are obtained.

A New Approach for Parameter Optimization in Land Surface Model

In this study,a new parameter optimization method was used to investigate the expansion of conditional nonlinear optimal perturbation （CNOP） in a land surface model （LSM） using long-term enhanced field observations at Tongyu station in Jilin Province,China,combined with a sophisticated LSM （common land model,CoLM）.Tongyu station is a reference site of the international Coordinated Energy and Water Cycle Observations Project （CEOP） that has studied semiarid regions that have undergone desertification,salination,and degradation since late 1960s.In this study,three key land-surface parameters,namely,soil color,proportion of sand or clay in soil,and leaf-area index were chosen as parameters to be optimized.Our study comprised three experiments：First,a single-parameter optimization was performed,while the second and third experiments performed triple-and six-parameter optimizations,respectively.Notable improvements in simulating sensible heat flux （SH）,latent heat flux （LH）,soil temperature （TS）,and moisture （MS） at shallow layers were achieved using the optimized parameters.The multiple-parameter optimization experiments performed better than the single-parameter experminent.All results demonstrate that the CNOP method can be used to optimize expanded parameters in an LSM.Moreover,clear mathematical meaning,simple design structure,and rapid computability give this method great potential for further application to parameter optimization in LSMs.

Optimal reaction conditions for pyridine synthesis in riser reactor

Pjridine has been generally synthesized by aldehydes and ammonia in a turbulent fluidized-bed reactor. In this paper, a novel riser reactor was proposed for pyridine synthesis. Experiment result showed that the yield of pyridine and 3-picoline decreased, but the selectivity of pyridine over 3-picoline increased compared to turbulent fluidized-bed reactor. Based on experimental data, a modified kinetic model was used for the determination of optimal operating condition for riser reactor. The optimal operating condition of riser reactor given by this modified model was as follows： The reaction temperature of 755 K, catalyst to feedstock ratio （CTFR） of 87, residence timeof3.8sandinitialacetaldehydesconcentrationof0.0029mol.L-1 （acetaldehydes to formaldehydes ratio by mole （ATFR） of 0.65 and ammonia to aldehydes ratio by mole （ATAR） of 0.9, water contention of 63wt% （formaldehyde solution））.