A layered multifunctional framework based on polyacrylonitrile and MOF derivatives for stable lithium metal anode

Composite Li metal anodes based on three-dimensional(3D) porous frameworks have been considered as an effective material for achieving stable Li metal batteries with high energy density.However,uneven Li deposition behavior still occurs at the top of 3D frameworks owing to the local accumulation of Li ions.To promote uniform Li deposition without top dendrite growth,herein,a layered multifunctional framework based on oxidation-treated polyacrylonitrile(OPAN) and metal-organic framework(MOF) derivatives was proposed for rationally regulating the distribution of Li ions flux,nucleation sites,and electrical conductivity.Profiting from these merits,the OPAN/carbon nano fiber-MOF(CMOF) composite framework demonstrated a reversible Li plating/stripping behavior for 500 cycles with a stable Coulombic efficiency of around 99.0% at the current density of 2 mA/cm~2.Besides,such a Li composite anode exhibited a superior cycle lifespan of over 1300 h under a low polarized voltage of 18 mV in symmetrical cells.When the Li composite anode was paired with LiFePO_(4)(LFP) cathode,the obtained full cell exhibited a stable cycling over 500 cycles.Moreover,the COMSOL Multiphysics simulation was conducted to reveal the effects on homogeneous Li ions distribution derived from the above-mentioned OPAN/CMOF framework and electrical insulation/conduction design.These electrochemical and simulated results shed light on the difficulties of designing stable and safe Li metal anode via optimizing the 3D frameworks.

Research of the Conductive Structure of Crust and the Upper Mantle beneath the South-Central Tibetan Plateau

With the super-wide band magnetoteiluric sounding data of the JUong （吉隆）-Cuoqin （措勤） profile （named line 800） which was completed in 2001 and the Dingri （定日）-Cuomai （措迈） profile （named line 900） which was completed in 2004, we obtained the strike direction of each MT station by strike analysis, then traced profiles that were perpendicular to the main strike direction, and finally obtained the resistivity model of each profile by nonlinear conjugate gradients （NLCG） inversion. With these two models, we described the resistivity structure features of the crust and the upper mantle of the center-southern Tibetan plateau and its relationship with Yalung Tsangpo suture： the upper crust of the research area is a resistive layer with resistivity value range of 200-3 000 Ω.m. The depth of its bottom surface is about 15-20 km generally, but the bottom surface of resistive layer is deeper in the middle of these two profiles. At llne 900, it is about 30 km deep, and even at line 800, it is about 38 km deep. There is a gradient belt of resistivity at the depth of 15-45 km, and a conductive layer is beneath it with resistivity even less than 5 Ω.m. This conductive layer is composed of individual conductive bodies, and at the south of the Yalung Tsangpo suture, the conductive bodies are smaller with thickness about 10 km and lean to the north slightly. However, at the north of the Yalung Tsangpo suture, the conductive bodies are larger with thickness about 30 km and also lean to the north slightly. Relatively, the conductive bodies of line 900 are thinner than those of line 800, and the depth of the bottom surface of line 900 is also shallower. At last, after analyzing the effect factors to the resistivity of rocks, it was concluded that the very conductive layer was caused by partial melt or connective water in rocks. It suggests that the middle and lower crust of the center-southern Tibetan plateau is very thick, hot, flabby, and waxy.

The Electrical Conductivity Structure of the Lanping–Simao Basin and its Implications for Mineralization

Objective The Lanping-Simao Basin in western Yunnan, located in the southeastern margin of the Tibetan Plateau, is tectonically in the transition zone between the Gondwana and Eurasia tectonic domains. It is also the frontier zone of northeastern extrusion of the Indochina Plate towards the Eurasia Plate as well as the escape zone for the deep material. The middle axial tectonic zone, also known as the Lanping-Simao Fault （LSF） in previous study, is a giant intraplate tectonic belt composed of a series of narrow uplift belt, rupture depression zone, metamorphic belt, alteration belt and marginal fracture system, which were formed by the compressional uplift of the central depression of the Lanping-Simao Basin. This tectonic unit controls the geological evolution, seismic activity, hot spring distribution and ore formation of the LanpingSimao Basin since the Mesozoic and Cenozoic.

Crust-mantle structure feature and the seismic activity of the main tectonic units in the North Tanlu fault zone

Using recent data of geoscience transaction in Northeast China, the author analyses and studies the crust-upper mantle structure feature of the North Tanlu fault zone. The result shows the crust-mantle structure are obvious difference at both sides of the North Tanlu fault zone. The fault activity and segmentation are closely related with abruptly change zone of the crust-upper mantle structure. There is a clear mirror image relationship between the big geomorphic shape and asthenosphere undulate, the former restricts tectonic stability and tectonic style of dif- ferent crustal units. The significantly strengthening seismicity of north set and south set in the North Tanlu fault zone just correspond to the low-velocity and high conductivity layer of crust-upper mantle. In the North Tanlu fault zone, the main controlling structure of the mid-strong seismic generally consists of the active fault sectors, whose crust-mantle structure is more complicated in rigidity massif.

Crustal Electrical Conductivity Structure of Southern Tibet from Magnetotelluric Survey

Two superwide bands of frequency magnetotelluric (MT) profiles (Yadong-Xuegula, Jilong-Cuoqin) across the Yaluzangbu suture were deployed along the west-east direction, for the research into the electrical conductivity structure in the shallow and deep crust along the west-east and north-south directions in the southern part of Tibet plateau. The main characters of the electrical conductivity structure in this region are: (1) large-scale high resistive bodies exist near the Yaluzangbu suture surface, which extends to the maximum depth of more than 30 km. They are the reflection of the Gangdise granite; (2) small-scale conductive bodies exist in the southern part of the Yaluzangbu suture, and large-scale ones under the suture and in the northern part; (3) conductive bodies widely spread in the crust along the profiles. They are discontinuous, mainly decline to the north and become larger in scale, steeper near the suture, deeper gradually from south to north; (4) under the Yaluzangbu suture, the conductive bodies become larger in scale, more conductive gradually from west to east. These important electrical characters are caused possibly by the India plate subduction to the north. The variation in characters of the large-scale conductive bodies from west to east may be the proof that the plate collision might cause substantial movement along the west-east direction.

Deep electrical conductivity structure in the Great Wall Station area， Fildes Peninsula， West Antarctica

MT measured in Great Wall Station area shows that the electrical conductivity major axis of the Wind Valley Fault is 110°NE and the crustal thickness in the Fildes Peninsula is about 22. 3 km. The crust contains four main resistivity layers with their thicknesses being 1. 3 km, 6. 7 km, 1. 2 km and 13.1 km respectively. The upper crustal thickness is 9. 2 km and the lower crustal thickness is 13. 1 km.

Preparation , Structure and DC Conductivity of Organic Semiconductor PA NI-C_4H_6O_6

A new organic semiconductor tartaric acid doped salt of emeraldine polyaniline (PANI-C 4H 6O 6) has been obtained by the method of oxidative polymerization of monomeric aniline with ammonium persulfate in acidic solution. The structure was characterized by Fourier Transform Infrared technique (FTIR) and X-ray diffraction (XRD). The temperature dependence dc conductivity δ dc ( T ) shows a semiconductor behavior and follows the quasi one dimensional variable range hopping (Q1D-VRH) model. Data on δ dc ( T ) are also discussed.

Effect of Pisha sandstone on water infiltration of different soils on the Chinese Loess Plateau

The infiltration of water into soil is one of the most important soil physical properties that affect soil erosion and the eco-environment, especially in the Pisha sandstone area on the Chinese Loess Plateau. We studied the one-dimensional vertical infiltration of water in three experimental soils, created by mixing Pisha sandstone with sandy soil, irrigation-silted soil, and loessial soil, at mass ratios of 1：1, 1：2, 1：3, 1：4, and 1：5. Our objective was to compare water infiltration in the experimental soils and to evaluate the effect of Pisha sandstone on water infiltration. We assessed the effect by measuring soil bulk density（BD）, porosity, cumulative infiltration, infiltration rate and saturated hydraulic conductivity（Ks）. The results showed that Pisha sandstone decreased the infiltration rate and saturated hydraulic conductivity in the three experimental soils. Cumulative infiltration over time was well described by the Philip equation. Sandy soil mixed with the Pisha sandstone at a ratio of 1：3 had the best water-holding capacity. The results provided experimental evidence for the movement of soil water and a technical support for the reconstruction and reclamation of mining soils in the Pisha sandstone area.

ION CONDUCTION IN COMPLEX OF ACRYLONITRILE-COPOLYMERIZED COMB POLYETHER WITH LITHIUM PERCHLORATE

Poly (oligoether methacrylate-co-acrylonitrile) s, P (MEOn- AN), with oligoether pendants of different lengths were synthesized and the ion conduction property of their Li-salt complexes was studied as the function of polymer structure. At proper copolymer composition, lithium concentration and pendant length, the ion conductivity reaches 7.0×10^(-5)S/cm at ambient temperature, together with improved mechanical strength. The ion transport in the polymer media is assisted by segmental relaxation, which is confirmed both by the consistency between ion conductivity and T_g and by the study of TSC.

Magnetotelluric sounding study in the region of Zhongshan Station，East Antarctica

This paper deals with the results of the MT observations in the region of Zhongshan Station,Larsemann Hills area, East Antarctica and points out that the lithosphere thickness of the Larsemann Hills is 140 km and the crustal high conductivity layer is situated in 22 km.

RF-thermal-structural-RF coupled analysis on a travelling wave disk-loaded accelerating structure

The travelling wave （TW） disk-loaded accelerating structure is one of the key components in normal conducting （NC） linear accelerators, and has been studied for many years. In the design process, usually after the dimensions of each cell and the two couplers are finalized, the structure is fabricated and tuned, and then the whole structure RF characteristics are measured by using a vector network analyzer. Before fabrication, the whole structure characteristics （including RF, thermal and structural ones） are less simulated due to the limited capability of currently available computers. In this paper, we described a method for performing RF-thermal-structural-RF coupled analysis on a TW disk-loaded structure using only one PC. In order to validate our method, we first analyzed and compared our RF simulation results on the 3 m long BEPC Ⅱ structure with the corresponding experimental results, which shows very good consistency. Finally, the RF-thermal-structure-RF coupled analysis results on the 1.35 m long NSC KIPT linac accelerating structure are presented.

Structure and optoelectrical properties of transparent conductive MGZO films deposited by magnetron sputtering

The transparent conductive Mg-Ga co-doped Zn O(MGZO) films were prepared by radio-frequency(RF) magnetron sputtering. The influence of substrate temperature on the structural and optoelectrical properties of the films is studied. The results show that all the films possess a preferential orientation along the(002) plane. With the increase of substrate temperature, the structure and optoelectrical properties of the films can be changed. When substrate temperature is 300 ℃, the deposited film exhibits the best crystalline quality and optoelectrical properties, with the minimum micro strain of 1.09×10^(-3), the highest average visible transmittance of 82.42%, the lowest resistivity of 1.62×10^(-3) Ω·cm and the highest figure of merit of 3.18×10~3 Ω^(-1)·cm^(-1). The optical bandgaps of the films are observed to be in the range of 3.342—3.545 eV. The refractive index dispersion curves obey the Sellmeier's dispersion model.

Geothermal data analysis at the high-temperature hydrothermal area in Western Sichuan

The western Sichuan hydrothermal area is located at the northeastern margin of the eastern syntaxis of the Qinghai-Tibet Plateau, which is also the eastern end of the Mediterranean-Himalayan geothermal activity zone. There are 248 warm or hot springs in this area, and 11 have temperatures beyond the local boiling temperature. Most of these hot springs are distributed along the Jinshajiang, Dege-Xiangcheng, Ganzi-Litang, and Xianshuihe faults, forming a NW-SE hydrothermal belt. A geothermal analysis of this high-temperature hydrothermal area is an important basis for understanding the deep geodynamic process of the eastern syntaxis of the Qinghai-Tibet Plateau. In addition, this study offers an a priori view to utilize geothermal resources, which is important in both scientific research and application. We use gravity, magnetic, seismic, and helium isotope data to analyze the crust-mantle heat flow ratio and deep geothermal structure. The results show that the background terrestrial heat flow descends from southwest to northeast. The crustal heat ratio is not more than 60%. The high temperature hydrothermal active is related to crustal dynamics processes. Along the Batang-Litang-Kangding line, the Moho depth increases eastward, which is consistent with the changing Qc/Qm(crustal/mantle heat flow) ratio trend. The geoid in the hydrothermal zone is 4–6 km higher than the surroundings, forming a local "platform". The NW-SE striking local tensile stress zone and uplift structure in the upper and middle crust corresponds with the surface hydrothermal active zone. There is an average Curie Point Depth(CPD) of 19.5–22.5 km in Batang, Litang, and Kangding. The local shear-wave(S-wave) velocity is relatively low in the middle and lower crust. The S-wave shows a low velocity trap(Vs<3.2 km s.1) at 15–30 km, which is considered a high-temperature partial melting magma, the crustal source of the hydrothermal active zone. We conclude that the hydrothermal system in this area can be divided into Batang-type and Kangding-type, both of which rely on a crustal heating cycle of atmospheric precipitation and surface water along the fracture zone. The heat is derived from the middle and lower crust: groundwater penetrates the deep faults bringing geothermal energy back to the surface and forming high-temperature springs.

Facile Preparation of NiO@graphene Nanocomposite with Superior Performances as Anode for Li-ion Batteries

Transition metal oxides gain considerable research attentions as potential anode materials for lithium ion batteries,but their applications are hindered due to their poor electronic conductivity,weak cycle stability and drastic volume change.Here,a NiO@graphene composite with a unique 3D conductive network structure is prepared through a simple strategy.When applied as anode material for Li-ion batteries,at 50 mA g^(−1),the NiO@graphene displays a high reversible capacity of 1366 mAh g^(−1) and a stable cyclability of 205 mAh g^(−1) after 500 cycles.Even at a high rate of 10 A g^(−1),it displays a favorable reversible capacity of 711 mAh g^(−1).Remarkably,when it recovers back to 0.05 A g^(−1),a reversible capacity of 1741 mAh g^(−1) is achieved.Thus,the NiO@graphene composite with 3D structure shows good application prospects as an alternative anode for advanced lithium ion batteries.

Synchrotron radiation photoemission spectrum study on K_3C_(60) film

K3C60 single crystal film was prepared on the cleaved (111) surface of C60 single crystal. Synchrotron radiation angle-resolved photoemission spectra were measured at normal emission with sample temperature at - 150K. Up to four subpeaks of LUMO-derived band were observed. These sub-peaks exhibit distinct energy dispersions which resemble in general the theoretical ones calculated for K3C60 at low temperature with the so-called one-dimensional disordered structure. But there is large deviation of experimental sub-band intervals from the theoretical values. This result is meaningful for the studies of the physical properties of alkali-doped C60 solids, e.g. the mechanism for superconductivity.