In our previous study, metals have been used as absorbers in the clear plastic laser transmission welding. The effects of metal thermal conductivity on the welding quality are investigated in the present work. Four me...In our previous study, metals have been used as absorbers in the clear plastic laser transmission welding. The effects of metal thermal conductivity on the welding quality are investigated in the present work. Four metals with distinctly different thermal conductivities, i.e., titanium, nickel, molybdenum, and copper, are selected as light absorbers. The lap welding is conducted with an 808 nm diode laser and simulation experiments are also conducted. Nickel electroplating test is carried out to minimize the side-effects from different light absorptivities of different metals. The results show that the welding with an absorber of higher thermal conductivity can accommodate higher laser input power before smoking, which produces a wider and stronger welding seam.The positive role of the higher thermal conductivity can be attributed to the fact that a desirable thermal field distribution for the molecular diffusion and entanglement is produced from the case with a high thermal conductivity.展开更多
The cation—conductive blends plasticized with propylene carbonate were prepared. The blends exhibited good mechanical strength and single—cation conduction over a wide range of plasticizer composition. The plasticiz...The cation—conductive blends plasticized with propylene carbonate were prepared. The blends exhibited good mechanical strength and single—cation conduction over a wide range of plasticizer composition. The plasticizer not only increases the conductivity of the blends but also decreases the electrochemical interface resistance between the blend and lithium electrode. The carrier in the blends obviously grows in number.展开更多
以ABS/PC塑料板为试验材料,采用DIN EN ISO 2039—1:2003《塑料硬度测定第一部分:球压痕法》中规定的方法,测试塑料板球压痕硬度值;依据JJF 1059.1—2012《测量不确定度评定与表示》,建立数学模型及对不确定度来源量化分析,对ABS/PC塑...以ABS/PC塑料板为试验材料,采用DIN EN ISO 2039—1:2003《塑料硬度测定第一部分:球压痕法》中规定的方法,测试塑料板球压痕硬度值;依据JJF 1059.1—2012《测量不确定度评定与表示》,建立数学模型及对不确定度来源量化分析,对ABS/PC塑料板球压痕硬度测量结果进行了评定。ABS/PC塑料板测定结果为H=121 N/mm^(2),其中扩展不确定度为3.3 N/mm^(2),该不确定度主要来源于重复性测量。展开更多
基金Supported by the National Key R&D Program of China under Grant No 2016YFA0401100the National Natural Science Foundation of China under Grant No 61575129the National High-Technology Research and Development Program of China under Grant No 2015AA021102
文摘In our previous study, metals have been used as absorbers in the clear plastic laser transmission welding. The effects of metal thermal conductivity on the welding quality are investigated in the present work. Four metals with distinctly different thermal conductivities, i.e., titanium, nickel, molybdenum, and copper, are selected as light absorbers. The lap welding is conducted with an 808 nm diode laser and simulation experiments are also conducted. Nickel electroplating test is carried out to minimize the side-effects from different light absorptivities of different metals. The results show that the welding with an absorber of higher thermal conductivity can accommodate higher laser input power before smoking, which produces a wider and stronger welding seam.The positive role of the higher thermal conductivity can be attributed to the fact that a desirable thermal field distribution for the molecular diffusion and entanglement is produced from the case with a high thermal conductivity.
文摘The cation—conductive blends plasticized with propylene carbonate were prepared. The blends exhibited good mechanical strength and single—cation conduction over a wide range of plasticizer composition. The plasticizer not only increases the conductivity of the blends but also decreases the electrochemical interface resistance between the blend and lithium electrode. The carrier in the blends obviously grows in number.
文摘以ABS/PC塑料板为试验材料,采用DIN EN ISO 2039—1:2003《塑料硬度测定第一部分:球压痕法》中规定的方法,测试塑料板球压痕硬度值;依据JJF 1059.1—2012《测量不确定度评定与表示》,建立数学模型及对不确定度来源量化分析,对ABS/PC塑料板球压痕硬度测量结果进行了评定。ABS/PC塑料板测定结果为H=121 N/mm^(2),其中扩展不确定度为3.3 N/mm^(2),该不确定度主要来源于重复性测量。
