NONLINEAR J-E CHARACTERISTICS IN THE ELECTRIC-THERMAL EQUILIBRIUM STATE FOR HIGH DENSITY POLYETHYLENE CONDUCTIVE COMPOSITES

The nonlinear J-E characteristics under self-heating equilibrium for conductive composites based on high density polyethylene were studied. The results show that there are identical conduction mechanisms under self-heating equilibrium for the composites with various initial resistivities determined by filler content or ambient temperature. The nonlinear conduction behavior was involved in the limited microstructure transformations of the conducting network induced by electrical field applied and the corresponding self-heating effect. A reversible thermal fuse (RTF) model was suggested to interpret the physical origin of the nonlinear J-E characteristics.

Electrical and Optical Properties of Nano Aluminum Film/Particle Structure

The electrical and optical effects of particles on the nano aluminum film deposited by thermal evaporation was investigated. From the characterization results of scanning electron microscope（SEM）, the accumulation in tens of nanometers had been observed. The current-voltage（I-V） curve of the sample indicates its nonlinear electrical characters expecting the corresponding nonlinear optical properties. By the theoretical calculation, nonlinear conduction of the carrier transportation may result from the barrier-well-barrier structure, where negative resistance and Coulomb blockade effect appears. The simulation results are approximately matched with the experimental results. By testing the fluorescence emission spectrum of the sample, peaks were found to be located at 420 and 440 nm. In addition, the full width at half maximum（FWHM） had been obviously broadened by means of adding 2, 5-diphenyloxazole（DPO）. Therefore, discrete energy levels could be estimated inside those particles.

Improved Particle Swarm Optimization for Solving Transient Nonlinear Inverse Heat Conduction Problem in Complex Structure

Accurately solving transient nonlinear inverse heat conduction problems in complex structures is of great importance to provide key parameters for modeling coupled heat transfer process and the structure’s optimization design.The finite element method in ABAQUS is employed to solve the direct transient nonlinear heat conduction problem.Improved particle swarm optimization(PSO)method is developed and used to solve the transient nonlinear inverse problem.To investigate the inverse performances,some numerical tests are provided.Boundary conditions at inaccessible surfaces of a scramjet combustor with the regenerative cooling system are inversely identified.The results show that the new methodology can accurately and efficiently determine the boundary conditions in the scramjet combustor with the regenerative cooling system.By solving the transient nonlinear inverse problem,the improved particle swarm optimization for solving the transient nonlinear inverse heat conduction problem in a complex structure is verified.

BLOW－UP AND DIE－OUT OF SOLUTIONS OF NONLINEAR PSEUDO-HYPERBOLIC EQUATIONS OF GENERALIZED NERVE CONDUCTION TYPE

This paper considers the initial boundary value problems with three types of the boundary conditions for nonlinear pseudo-hyperbolic equations of generalized nerve conduction type, using foe eigenfunction method, the conditions for which the solutions blow-up and die-out in the finile time are got.

Numerical manifold method for steady-state nonlinear heat conduction using Kirchhoff transformation

The numerical manifold method(NMM)introduces the mathematical and physical cover to solve both continuum and discontinuum problems in a unified manner.In this study,the NMM for solving steady-state nonlinear heat conduction problems is presented,and heat conduction problems consider both convection and radiation boundary conditions.First,the nonlinear governing equation of thermal conductivity,which is dependent on temperature,is transformed into the Laplace equation by introducing the Kirchhoff transformation.The transformation reserves linearity of both the Dirichlet and the Neumann boundary conditions,but the Robin and radiation boundary conditions remain nonlinear.Second,the NMM is employed to solve the Laplace equation using a simple iteration procedure because the nonlinearity focuses on parts of the problem domain boundaries.Finally,the temperature field is retrieved through the inverse Kirchhoff transformation.Typical examples are analyzed,demonstrating the advantages of the Kirchhoff transformation over the direct solution of nonlinear equations using the NewtonRaphson method.This study provides a new method for calculating nonlinear heat conduction.

EQ^(rot)_1 Nonconforming Finite Element Method for Nonlinear Dual Phase Lagging Heat Conduction Equations

EQrot nonconforming finite element approximation to a class of nonlinear dual phase lagging heat conduction equations is discussed for semi-discrete and fully-discrete schemes. By use of a special property, that is, the consistency error of this element is of order O（h2） one order higher than its interpolation error O（h）, the superclose results of order O（h2） in broken Hi-norm are obtained. At the same time, the global superconvergence in broken Hi-norm is deduced by interpolation postprocessing technique. Moreover, the extrapolation result with order O（h4） is derived by constructing a new interpolation postprocessing operator and extrapolation scheme based on the known asymptotic expansion formulas of EQrot element. Finally, optimal error estimate is gained for a proposed fully-discrete scheme by different approaches from the previous literature.

The Method of Fundamental Solutions for Steady-State Heat Conduction in Nonlinear Materials

The steady-state heat conduction in heat conductors with temperature dependent thermal conductivity and mixed boundary conditions involving radiation is investigated using the method of fundamental solutions.Various computational issues related to the method are addressed and numerical results are presented and discussed for problems in two and three dimensions.