Shear reinforcement effect of reinforced concrete tie-columns on the lateral resistance of confined masonry walls

Tie-columns improve significantly the lateral resistance of masonry bearing walls against persistent, transient and accidental loads. The research work described herein has been carried out to assess the lateral resistance of confined masonry walls, where contribution of the masonry panel is evaluated according to material mechanics and tie-columns effect is estimated by a proposed analytical formulation based on a model reported on previously. This approach takes into account the effect of dowel support on the reaction of its adjacent shear reinforcement： the conditions for the various contributions of transverse reinforcements are better defined following a clear evaluation of the participation ratio of these reinforcements. Lateral resistances of confined masonry walls measured in full-scale tests and gleaned from the literature are compared and checked with resistances calculated using the present approach.

A Review of Fibre Reinforced Polymer (FRP) Reinforced Concrete Composite Column Members Modelling and Analysis Techniques

The use of fibre-reinforced polymer(FRP)to confine concrete columns improves the strength and ductility of the columns by reducing passive lateral confinement pressure.Many numerical and analytical formulations have been proposed in the literature to describe the compressive behaviour of FRP confined concrete under both monotonic and cyclic loads.However,the efect of a stress/strain level in the columns has not been well defined because of the lack of well-defined strategies of modeing and oversimplification of the model.This paper reviews the existing FRP combinations and the available numerical and analytical methods to determine the effectiveness of the adopted method.An effort has been made to examine the usage of FRP materials in column applications in exist-ing building regimes and highlights the possible future scopes to improve the use of FRP confined concrete in civil applications.

Experimental and Numerical Studies on Sea Sand Concrete Filled Stainless Steel Tube with Inner FRP Tube Subjected to Axial Compression

Since fibre-reinforced polymer(FRP) and stainless steel(SS) offer advantages of corrosion resistance and hybrid confinement, this study proposed a new type of composite column: sea sand concrete(SSC)-filled SS tubular columns with an inner FRP tube(CFSTFs) to help exploit abundant ocean resources in marine engineering. To study compressive behaviours of these novel members, eight CFSTFs and two SSC-filled SS tubular columns(CFSTs)were tested under axial compression. Their axial load-displacement curves, axial load-strain curves in SS or FRP tubes were obtained, and influences of key test parameters(the existence of glass FRP(GFRP) tubes, steel tube shapes, and GFRP tube thicknesses and diameters) were discussed. Further, specimen failure mechanism was analyzed employing the finite element method using ABAQUS software. Test results confirmed the excellent ductility and load-bearing capacity of CFSTFs. The existence of GFRP tubes inside can postpone SS tube buckling, and the content of inner FRP tubes, particularly increasing diameters, was found to improve compressive behaviours. GFRP contents helped develop the second elastic-plastic stage of the load-displacement curves. Furthermore, the bearing capacity of CFSTFs with a circular cross-section was approximately 26% higher than that with a square cross-section, and this difference narrowed with the increase in GFRP ratios.

Strength and Deformation of Axially Loaded Fiber-Reinforced Polymer Sheet Confined Concrete Columns

Experimental results of 29 axially loaded fiber-reinforced polymer sheet (FS) confined concrete columns and two reference plain concrete columns are introduced. Twenty four column specimens were confined with carbon fiber sheet (CFS) and five column specimens were hybrid confined with both CFS and glass fiber sheet (GFS). The influence of aspect ratio, FS material, initial axial force ratio, and FS confine-ment degree on the strength and deformation of columns were studied. Based on the experimental results, the equations of complete stress-strain curve of CFS confined concrete are proposed. These equations are suitable for the nonlinear analysis of square and rectangular section columns. Suggestions of applying FS to confine concrete columns are presented.

Confinement properties of circular concrete columns wrapped with prefabricated textile-reinforced fine concrete shells

This paper proposes an innovative column composed of a core column(including both reinforced concrete(RC)and plain concrete(PC)columns)and a prefabricated textile-reinforced fine concrete(TRC)shell.To study the confinement properties of TRC shells on this novel type of concrete column,20 circular specimens,including 12 PC columns and 8 RC columns,were prepared for axial compressive tests.Four key parameters,including the column size,reinforcing ratio of the carbon textile,concrete strength,and stirrup spacing,were evaluated.The results indicated that the compressive properties of the columns were improved by increasing the reinforcing ratio of the textile layers.In the case of TRC-confined PC columns,the maximum improvement in the peak load was 56.3%,and for TRC-confined RC columns,the maximum improvement was 60.2%.Based on the test results,an analytical model that can be used to calculate the stress–strain curves of prefabricated TRC shell-confined concrete columns has been proposed.The calculated curves predicted by the proposed model agreed well with the test results.