Study on a conical bearing for acceleration-sensitive equipment

Seismic isolation effectively reduces seismic demands on building structures by isolating the superstructure from ground vibrations during earthquakes.However,isolation strategies give less attention to acceleration-sensitive systems or equipment.Meanwhile,as the isolation layer’s displacement grows,the stiffness and frequency of traditional rolling and sliding isolation bearings increases,potentially causing self-centering and resonance concerns.As a result,a new conical pendulum bearing has been selected for acceleration-sensitive equipment to increase self-centering capacity,and additional viscous dampers are incorporated to enhance system damping.Moreover,the theoretical formula for conical pendulum bearings is supplied to analyze the device’s dynamic parameters,and shake table experiments are used to determine the proposed device’s isolation efficiency under various conditions.According to the test results,the newly proposed devices have remarkable isolation performance in terms of minimizing both acceleration and displacement responses.Finally,a numerical model of the isolation system is provided for further research,and the accuracy is demonstrated by the aforementioned experiments.

Development and Fabrication of Manually Push-Pull Type Conical Weeder for Bangladesh Condition

In Bangladesh, the use of machinery in agriculture production is fast rising. Researchers are developing technology to replace traditional hand weeding to manage weeds in rice fields. The present study has been taken to increase weeding efficiency and reduce the drudgery in weeding and mulching. A line-to-line distance of 20 cm, the operation is push-pull, and field operating condition at 2 - 4 cm standing water (for softening the field) was the designed hypothesis. The weeder consists of a skid/float, float holder, float adjuster, main body frame, rotor, axel, bush, rotor holder, rotor holder adjuster, handle, handle griper, handle holder, handle height adjuster, nut, bolt, etc. The designed weeder was fabricated using MS sheet, MS pipe, MS flat bar, MS nut-bolt, etc. When the rotors perform back and forth, the weeder’s two conical rotors with six plain blades and six serrated blades work together to uproot and bury the weeds. It also contains a 2 mm thick float assembly with a precise angle of 22 degrees. Weeds are uprooted by the weeder’s blades and buried in the muddy soil. It causes topsoil disturbance and enhances aeration. The weeding efficiency and capacity of the conical weeder were 81.92% and 0.0203 ha/h respectively. With a push-pull operation, the weeder can uproot and bury the weeds in a single row at a time. The pushing force and weight of weeder were 43.42 N and 5.6 kg respectively. Farmers can use this weeder to increase their comfort and reduce the drudgery associated with weeding and mulching in their fields.

Torsional postbuckling characteristics of functionally graded graphene enhanced laminated truncated conical shell with temperature dependent material properties

Buckling and postbuckling characteristics of laminated graphene-enhanced composite(GEC)truncated conical shells exposed to torsion under temperature conditions using finite element method(FEM)simulation are presented in this study.In the thickness direction,the GEC layers of the conical shell are ordered in a piece-wise arrangement of functionally graded(FG)distribution,with each layer containing a variable volume fraction for graphene reinforcement.To calculate the properties of temperaturedependent material of GEC layers,the extended Halpin-Tsai micromechanical framework is used.The FEM model is verified via comparing the current results obtained with the theoretical estimates for homogeneous,laminated cylindrical,and conical shells,the FEM model is validated.The computational results show that a piece-wise FG graphene volume fraction distribution can improve the torque of critical buckling and torsional postbuckling strength.Also,the geometric parameters have a critical impact on the stability of the conical shell.However,a temperature rise can reduce the crucial torsional buckling torque as well as the GEC laminated truncated conical shell’s postbuckling strength.

Conical Sonic-Supersonic Solutions for the 3-D Steady Full Euler Equations

This paper concerns the sonic-supersonic structures of the transonic crossflow generated by the steady supersonic flow past an infinite cone of arbitrary cross section.Under the conical assumption,the three-dimensional(3-D)steady Euler equations can be projected onto the unit sphere and the state of fluid can be characterized by the polar and azimuthal angles.Given a segment smooth curve as a conical-sonic line in the polar-azimuthal angle plane,we construct a classical conical-supersonic solution near the curve under some reasonable assumptions.To overcome the difficulty caused by the parabolic degeneracy,we apply the characteristic decomposition technique to transform the Euler equations into a new degenerate hyperbolic system in a partial hodograph plane.The singular terms are isolated from the highly nonlinear complicated system and then can be handled successfully.We establish a smooth local solution to the new system in a suitable weighted metric space and then express the solution in terms of the original variables.

Optimization design of conical reaction teeth of shear wave vibroseis vibration plate

The vibrator plate is the link between the vibroseis vehicle and the earth,as well as the core com-ponent of the vibrator vehicle.In this paper,the coupling effect between the vibrator plate and the earth is an-alyzed from two aspects of reaction tooth arrangement and reaction tooth conical angle,and three groups of experimental models are optimized and designed.The model construction and numerical analysis of the shear wave vibroseis vibrator plate are carried out with ANSYS software.The motion law between the vibration plate and the earth at work was studied,the strain energy of the three experimental models in operation,the maximum displacement of particle at the same position and other reference indices were compared and ana-lyzed,with 28 conical reaction teeth were arranged on both sides.The coupling effect between the vibration plate and the earth was best when the tooth angle was 60°.Compared with the toothless vibration plate,the energy efficiency is improved by about 20%,and the coupling effect between the vibrator plate and the earth is effectively enhanced.It is found that the coupling effect is enhanced through increasing the number of reac-tion teeth of the vibration plate by increasing the coupling area between the vibration plate and the earth.

A New Method for Generating Conics

In this paper,based on the mean value theorem of differential,a new method of generating conics such as circles and parabolas is given,and the related algorithm for generating conics is designed.

Heat Transfer and Resistance Characteristics of Conical Spiral Tube Bundle Based on Field Synergy Principle

Conical spiral tube bundle are universally used in heat transfer enhancement in heat exchangers.The heat transfer and resistance of the tube bundle are affected greatly by the conical structure,so the analysis of it is necessary.In order to a further evaluation,the heat transfer and resistance characteristics of conical spiral tube bundle are investigated with regression analysis based on numerical simulation data.The correlations of heat transfer and pressure drop of conical spiral tube bundle are proposed both in laminar and turbulent fluid flow.On the based of the field synergy principle,the synergy of four vectors,the velocity,the velocity gradient,the temperature gradient and the pressure gradient,are calculated and discussed via the user defined function（UDF） program.The synergy angles β and θ,which respectively denote the performance of heat transfer enhancement and pressure drop of the conical spiral tube bundle,are analyzed.Finally,the comprehensive performance of the conical spiral tube is evaluated by the synergy angle γ and all of the three synergy angles of conical spiral tube bundle are compared to both bare tube and thin cylinder-interpolated tube.The analysis of the synergy angles shows that the heat transfer enhancement and pressure drop of conical spiral tube bundle are smaller than that of the thin cylinder-interpolated tube,while the comprehensive performance of conical spiral tube bundle is greater.The analysis of the heat transfer and pressure drop of conical spiral tube is valuable and instructional on the design and optimum of conical spiral tube bundle heat exchangers.

Experimental Study on Reaction Thrust Characteristics of Water Jet for Conical Nozzle

Water jet thruster, which is a marine system that creates a jet of water for propulsion, has several advantages such as low noise, good anti-cavitation characteristics and maneuvering characteristics. The reaction thrust characteristics of water jet for conical nozzles directly determine the speed of autonomous underwater vehicles （AUV）. Theoretical, numerical and experimental studies have been, carried out to investigate the effects of the nozzle geometries as well as inlet conditions on the reaction thrust of water jet in this paper. The experimental results show that： 1） the reaction thrust is proportional to inlet pressure, the square of flow rate and 2/3 power exponent of input power; 2） the diameter of cylinder column for conical nozzle has great influence on the reaction thrust characteristics; 3） the best values of the half cone angle and the cylinder column length exist to make the reaction thrust coefficient to reach the maximum under the same inlet conditions. Those provide a basis for nozzles design and have significant value, especially for developing high performance and efficiency water jet propulsion unit.

A new design equation for drained stability of conical slopes in cohesive-frictional soils

New plasticity solutions to the drained stability of conical slopes in homogeneous cohesive-frictional soils were investigated by axisymmetric finite element limit analysis. Three parameters were studied,i.e. excavated height ratios, slope inclination angles, and soil friction angles. The influences of these parameters on the stability factor and predicted failure mechanism of conical slopes were discussed. A new design equation developed from a nonlinear regression of the lower bound solution was proposed for drained stability analyses of a conical slope in practice. Numerical examples were given to demonstrate a practical application of the proposed equation to stability evaluations of conical slopes with both associated and non-associated flow rules.

Conical bubble photoluminescence from rhodamine 6G in 1, 2-propanediol

A modified U-tube conical bubble sonoluminescence device is used to study the conical bubble photoluminescence. The spectra of conical bubble sonoluminescence at different concentrations of rhodamine 6G （Rh6G） solution in 1,2- propanediol have been measured. Results show that the sonoluminescence from the conical bubbles can directly excite Rh6G, which in turn can fluoresce. The light emission of this kind is referred to as conical bubble photoluminescence. The maximum of fluorescence spectral line intensity in the conical bubble photoluminescence has a red shift in relative to that of the standard photo-excited fluorescence, which is due to the higher self-absorption of Rh6G, and the spectral line of conical bubble photoluminescence is broadened in width compared with that of photo-excited fluorescence.

THE CONSTRUCTION OF WAVELET-BASED TRUNCATED CONICAL SHELL ELEMENT USING B-SPLINE WAVELET ON THE INTERVAL

Based on B-spline wavelet on the interval （BSWI）, two classes of truncated conical shell elements were constructed to solve axisymmetric problems, i.e. BSWI thin truncated conical shell element and BSWI moderately thick truncated conical shell element with independent slopedeformation interpolation. In the construction of wavelet-based element, instead of traditional polynomial interpolation, the scaling functions of BSWI were employed to form the shape functions through the constructed elemental transformation matrix, and then construct BSWI element via the variational principle. Unlike the process of direct wavelets adding in the wavelet Galerkin method, the elemental displacement field represented by the coefficients of wavelets expansion was transformed into edges and internal modes via the constructed transformation matrix. BSWI element combines the accuracy of B-spline function approximation and various wavelet-based elements for structural analysis. Some static and dynamic numerical examples of conical shells were studied to demonstrate the present element with higher efficiency and precision than the traditional element.

Model Test Study on Ice Induced Vibration of A Compliant Conical Structure

The problem of ice induced vibration is common to ocean engineering of cold region countries. To study the ice induced vibration of a compliant conical structure, a series of model tests have been performed and some breakthrough progresses made. The ice sheet before the compliant conical structure is found to fail by two-time breaking in the tests. The process of two-time breaking behaves in two modes, and the general control of the ice and structural conditions determine the mode in which the ice force would behave. Two dynamic ice force functions are established respectively for the two modes of two-time breaking process in this paper. The numerical simulation results are in good agreement with the measured results, indicating that the dynamic ice force functions given in this paper can fully reflect the real situation of the dynamic ice force on a compliant conical structure.

A NOTE ON CONICAL KHLER-RICCI FLOW ON MINIMAL ELLIPTIC KHLER SURFACES

We prove that, under a semi-ampleness type assumption on the twisted canonical line bundle, the conical Kahler-Ricci flow on a minimal elliptic Kahler surface converges in the sense of currents to a generalized conical Kahler-Einstein on its canonical model. Moreover, the convergence takes place smoothly outside the singular fibers and the chosen divisor.

Practical Method of Conical Cam Outline Expansion

Conical cam mechanism has been widely used in modern machinery and equipment.However,the commonly used planar expansion methods for the design of spatial cam contour produce significant errors,because these methods incorrectly use the distance from the axis of the follower to the main conical cam to replace the corresponding arc length on the conical cam.HSIEH,et al,used analytical methods to achieve higher accuracy,but these analytical methods have their own drawbacks since they are too complicated for practical use.Through the analysis of the errors created during the generation of conical cam contour using the existing expansion methods,this paper proposes to include diverge angle in the calculation of conical cam rotation angle in the equation of conical cam contour expansion.This correction eliminates the error generated by the commonly used methods.Based on the expression of the follower＇s 3D trajectory and the spatial geometry of conical cam,this paper has deduced the planar polar curve equation for determining polar coordinates for the curve of planar expansion outline.Furthermore,this paper provides an example of conical cam contour design based on sinusoidal acceleration variation.According to polar coordinates and the movement of curve equation function expression,this paper applies MATLAB software to solve coordinates for the cam expansion curve and uses AutoCAD software to generate conical cam expansion contour that meets the requirement of the law of motion.The proposed method provides a design process that is simple,intuitive and easy to master and implement.It also avoids the design error in the traditional methods for generating contour of conical cam with oscillating follower that requires high precision.

Flow Control over a Conical Forebody by Duty-Cycle Actuations

Duty-cycle modulation alternately blowing from two opposite-facing plasma actu- ators on the leeward surface near the apex of a cone with a 10° semi-apex angle is adopted to control mean lateral force and moment, and the flow control mechanisms are presented. Pressure distributions over the forebody of the cone are measured by steady pressure tappings. The experiments are performed in a 3.0×1.6 m open-circuit wind tunnel at a wind speed of 20 m/s, a 45° angle of attack and a Reynolds number of 2×10^5, based on the diameter of the base of the cone. Almost linearly proportional control of the lateral forces and moments over a slender conical forebody at a high angle of attack has been demonstrated by employing a pair of single dielectric barrier discharge plasma actuators near the apex of the cone, combined with a duty-cycle tech- nique. The pressure distribution measurements indicate that the hi-stable vortex pattern appears to be shifted in the opposite direction when the port or starboard actuator is activated, while the other is kept off during the test. It is shown that the reduced pulse-repetition frequency based on the local diameter at the plasma actuator equal to one yields the highest effectiveness among the cases considered.

Automatic Formation Techniques of Woven Conical Vascular Graft

Conical vascular tubes are of strong demand owing to their formed shape and excellent characters to mimic human blood vessels. In this study,the automatic shuttle loom and computer aided design( CAD) system were customized to prepare a conical vascular graft. Meanwhile, the weaving principle of a conical vascular graft was identified in terms of the lift-drop front rest,and the geometrical relations were established among the cloth fell,front rest and back rest. Also,the change of weft density from the liftdrop motion of the front rest was analyzed,and a strategy was established to compensate the offset of weft density by changing the taken-up length. Afterwards,the proposed weaving principles were demonstrated by weaving a conical vascular graft on the customized shuttle loom.

Buckling analysis of functionally graded material(FGM) sandwich truncated conical shells reinforced by FGM stiffeners filled inside by elastic foundations

An analytical solution for buckling of an eccentrically stiffened sandwich truncated conical shell is investigated. The shell consists of two functionally graded material （FGM） coating layers and a core layer which are metal or ceramic subjected to an axial compressive load and an external uniform pressure. Shells are reinforced by stringers and rings, in which the material properties of shells and stiffeners are graded in the thickness direction following a general sigmoid law distribution. Two models of coated shell-stiffener arrangements are investigated. The change of the spacing between stringers in the meridional direction is taken into account. A couple set of three-variable- coefficient partial differential equations in terms of displacement components are solved by the Galerkin method. A closed-form expression for determining the buckling load is obtained. The numerical examples are presented and compared with previous works.

A New Model for Ice Forces on A Conical Structure

The ice force is an important factor to be taken into account for offshore structures in cold regions, and the calculation method of the ice force is meaningful for the offshore structure design. The cone is now used as an optimal ice-resistant structure because it can cause bending failure of the ice sheet. The interaction between an ice sheet and a conical structure is studied in this paper and Croasdale's model is modified based on field observations. The newly built model separates the ice sheet into the emersed part and the floating part, and the equilibrium analyses are carried out respectively. The bending moment distribution of the ice sheet is analyzed for the determination of the position of bending failure, which serves as a supplementary restraint. The analytic solution of the ice force on a conical structure is obtained and it is verified with the experimental data of previous researches.

TOOTH CONTACT ANALYSIS OF CONICAL INVOLUTE GEARS

The mathematical model of conical involute gears is developed based on the theory of gearing and the generating mechanism. Tooth contact analysis （TCA） is performed to examine the meshing and bearing contact of the conical involute gear pairs with intersected and crossed axes. In addition, the principal directions and curvatures of the gear surfaces are investigated and the contact ellipses of the mating tooth surfaces are also studied. Finally, the numerical illustrative examples are provided to demonstrate the computational results, test gears are made for tooth-bearing tests, and the conclusion is verified that the theory has the applicability.

Reaction thrust of water jet for conical nozzles

Clear knowledge on the reaction thrust of water jet is valuable for better design of water jet propulsion system. In this paper, theoretical, numerical and experimental studies were carried out to investigate the effects of the nozzle geometry as-well as the inlet conditions on the reaction thrust of water jet. Comparison analyses reveal that the reaction thrust has a direct proportional relationship with the product of the inlet pressure, the square of flow rate and two-thirds power exponent of the input power. The results also indicate that the diameter of the cylinder column for the conical nozzle has great influence on the reaction thrust characteristics. In addition, the best values of the half cone angle and the cylinder column length exist to make the reaction thrust reach its maximum under the same inlet conditions.