In order to reveal the constant-fatigue fracture form and mechanism of the welded cross plate-hollow sphere joints(WCPHSJs)and establish its formula,the WCPHSJs were fatigue tested.A total of 19 specimens were tested ...In order to reveal the constant-fatigue fracture form and mechanism of the welded cross plate-hollow sphere joints(WCPHSJs)and establish its formula,the WCPHSJs were fatigue tested.A total of 19 specimens were tested under constant amplitude fatigue loads using a specially designed test rig.The joint was analyzed statically by t e finite element analysis(F3A),and metallographic analysis of fatigue fracture was done by the electron scanning microscope.Numerical simulation and experimental results show that the hot-spot of WCPHSJ lies at the weld toe location where severe stress is concentrated.Fatigue cracks initiate at the weld toe and then propagate circumferentially around the sphere with a diameter equivalent to the width of the cross plate up to the fatigue facture.The initial welding defects and constructional detail constitute the main factor of fatigue failure.The S-N curves for the joints were developed through a linear regession analysis of fatigue data.A formula for calculating constant amplitude fatigue,base on the concept of the hot spot stress amplitude,is proposed.展开更多
Fatigue tests were conducted on tapered plain concrete prism specimens under tri axial constant-amplitude tension-compression cyclic loading. The low stress of the cyclic loading was taken as 0.2f c and the upper st...Fatigue tests were conducted on tapered plain concrete prism specimens under tri axial constant-amplitude tension-compression cyclic loading. The low stress of the cyclic loading was taken as 0.2f c and the upper stress ranged from 0. 20f t to 0.65f t. Three constant lateral pressures were 0.1f c, 0.2f c and 0.3f c respec tively. Based on the results, the th ree-stage evolution rule of the fatigue stiffness, maximum(minimum) longitudina l strain and damage were analyzed, and a unified S-N curve to calculate fati gue strength factors was worked out. The results show that the fatigue strength and fa tigue life under triaxial constant-amplitude tension-compression cyclic loadin g are smaller than those under uniaxial fatigue condition. Moreover, the secondary strain creep rate is related to the fatigue life, a formula for describing thei r relation was derived. The investigation of this paper can provide information for the fatigue design of concrete structures.展开更多
Unlike the existing resonance region radar systems （RRRS ） that transmit the orthogonal frequency division multiplexing （OFDM）multi-carrier waveform,the dense multi-carrier （DMC）radar waveform which has a narrow...Unlike the existing resonance region radar systems （RRRS ） that transmit the orthogonal frequency division multiplexing （OFDM）multi-carrier waveform,the dense multi-carrier （DMC）radar waveform which has a narrower frequency interval than the traditional OFDM waveform is proposed.Therefore,in the same frequency bandwidth,the DMC waveform contains more sub-carriers and provides more frequency diversity.Additionally,to further improve detection performance,a novel optimal weight accumulation target detection （OWATD）method is proposed,where the echo electromagnetic waves at different frequencies are accumulated with the optimal weight coefficients.Then,with the signal-to-noise ratio （SNR）of echo waveform approaching infinity,the asymptotic detection performance is analyzed, and the condition that the OWATD method with the DMC outperforms the matched filter with the OFDM is presented.Simulation results show that the DMC outperforms the OFDM in the target detection performance,and the OWATD method can further improve the detection performance of the traditional methods with both the OFDM and DMC radar waveform.展开更多
A semi-blind adaptive beamforming scheme is proposed for wireless systems that employ high-throughput quadrature amplitude modulation signalling. A minimum number of training symbols, equal to the number of receiver a...A semi-blind adaptive beamforming scheme is proposed for wireless systems that employ high-throughput quadrature amplitude modulation signalling. A minimum number of training symbols, equal to the number of receiver antenna arrayts elements, are first utilised to provide a rough initial least squares estimate of the beamformer＇s weight vector. A concurrent constant modulus algorithm and soft decision-directed scheme is then applied to adapt the beamformer. This semi-blind adaptive beamforming scheme is capable of converging fast to the minimum mean-square-error beamforming solution, as demonstrated in our simulation study.展开更多
基金The National Natural Science Foundation of China(No.51578357)the Natural Science Foundation of Shanxi Province(No.2015011062)Talent Training Program in the Postgraduate Joint Training Base of Shanxi Province(No.2016JD11)
文摘In order to reveal the constant-fatigue fracture form and mechanism of the welded cross plate-hollow sphere joints(WCPHSJs)and establish its formula,the WCPHSJs were fatigue tested.A total of 19 specimens were tested under constant amplitude fatigue loads using a specially designed test rig.The joint was analyzed statically by t e finite element analysis(F3A),and metallographic analysis of fatigue fracture was done by the electron scanning microscope.Numerical simulation and experimental results show that the hot-spot of WCPHSJ lies at the weld toe location where severe stress is concentrated.Fatigue cracks initiate at the weld toe and then propagate circumferentially around the sphere with a diameter equivalent to the width of the cross plate up to the fatigue facture.The initial welding defects and constructional detail constitute the main factor of fatigue failure.The S-N curves for the joints were developed through a linear regession analysis of fatigue data.A formula for calculating constant amplitude fatigue,base on the concept of the hot spot stress amplitude,is proposed.
基金Project supported by the National Natural Science Foundation of China(Grant No.50078010)
文摘Fatigue tests were conducted on tapered plain concrete prism specimens under tri axial constant-amplitude tension-compression cyclic loading. The low stress of the cyclic loading was taken as 0.2f c and the upper stress ranged from 0. 20f t to 0.65f t. Three constant lateral pressures were 0.1f c, 0.2f c and 0.3f c respec tively. Based on the results, the th ree-stage evolution rule of the fatigue stiffness, maximum(minimum) longitudina l strain and damage were analyzed, and a unified S-N curve to calculate fati gue strength factors was worked out. The results show that the fatigue strength and fa tigue life under triaxial constant-amplitude tension-compression cyclic loadin g are smaller than those under uniaxial fatigue condition. Moreover, the secondary strain creep rate is related to the fatigue life, a formula for describing thei r relation was derived. The investigation of this paper can provide information for the fatigue design of concrete structures.
基金The National Natural Science Foundation of China(No.61271204)the National Key Technology R&D Program during the 12th Five-Year Plan Period(No.2012BAH15B00)
文摘Unlike the existing resonance region radar systems （RRRS ） that transmit the orthogonal frequency division multiplexing （OFDM）multi-carrier waveform,the dense multi-carrier （DMC）radar waveform which has a narrower frequency interval than the traditional OFDM waveform is proposed.Therefore,in the same frequency bandwidth,the DMC waveform contains more sub-carriers and provides more frequency diversity.Additionally,to further improve detection performance,a novel optimal weight accumulation target detection （OWATD）method is proposed,where the echo electromagnetic waves at different frequencies are accumulated with the optimal weight coefficients.Then,with the signal-to-noise ratio （SNR）of echo waveform approaching infinity,the asymptotic detection performance is analyzed, and the condition that the OWATD method with the DMC outperforms the matched filter with the OFDM is presented.Simulation results show that the DMC outperforms the OFDM in the target detection performance,and the OWATD method can further improve the detection performance of the traditional methods with both the OFDM and DMC radar waveform.
文摘A semi-blind adaptive beamforming scheme is proposed for wireless systems that employ high-throughput quadrature amplitude modulation signalling. A minimum number of training symbols, equal to the number of receiver antenna arrayts elements, are first utilised to provide a rough initial least squares estimate of the beamformer＇s weight vector. A concurrent constant modulus algorithm and soft decision-directed scheme is then applied to adapt the beamformer. This semi-blind adaptive beamforming scheme is capable of converging fast to the minimum mean-square-error beamforming solution, as demonstrated in our simulation study.
