A novel constant interfacial area cell(NCIAC),by spatially separating the agitation from liquid flow circulation of organic and aqueous two phases,was suggested to obtain detailed kinetic data for Er(Ⅲ) extraction fr...A novel constant interfacial area cell(NCIAC),by spatially separating the agitation from liquid flow circulation of organic and aqueous two phases,was suggested to obtain detailed kinetic data for Er(Ⅲ) extraction from chloride medium by 2-ethyl-hexyl-phosphonic acid mono-(2-ethylhexyl) ester(EHEHPA).Different from the traditional Lewis cell and the constant interfacial area cell with laminar flow,the concentrations of Er(Ⅲ) in organic and aqueous two phases were uniform,and the stability of the interfacial area between the two phases could be controlled effectively.Therefore,the special requirements for the design of agitators in the traditional Lewis cell and the constant interfacial area cell for minimizing the influence of diffusion resistance could be avoided.Experimental results indicated that the extraction kinetics was mainly affected by the aqueous flow rate,interfacial area between organic and aqueous two phases,and the aqueous p H values.An extraction kinetic equation was suggested based on the experimental data.展开更多
Firstly, sample square-circular transition tube along straight central route was modeled on CATIA software. The parameters are as follows： let the tube length is L, and the constant cross section area is S, and S = ...Firstly, sample square-circular transition tube along straight central route was modeled on CATIA software. The parameters are as follows： let the tube length is L, and the constant cross section area is S, and S = πR^2 = a2, in which R stands for the circle radius on one end, and a the square side length on the other end; set up the coordinate system with OX axis on the central route in which the origin O is on centroid of the square end and assume the cross section size at x as the square shaped with all four comers filleted in radius r which is proportional to x, that is, the linear slope of r is R/L, thus, both values r and square side length ax can be attained on the constant cross section area assumption. Secondly, some sample polygonal-circular transition tubes along straight, circular and helical central route were implemented similarly. Thirdly, numerical analysis of stress and displacement of these tubes were carried out on MSC/PATRAN software which are important to the distribution of turbulent flow and the layout of these transitional tube structures.展开更多
Pressure transient analysis has been used to evaluate performance of a well located between one sealing fault and one constant pressure boundary. Type curves were generated by determining 1) dimensionless pressure and...Pressure transient analysis has been used to evaluate performance of a well located between one sealing fault and one constant pressure boundary. Type curves were generated by determining 1) dimensionless pressure and 2) rate of change of dimensionless pressure drop with respect to dimensionless time. When the well is located closer to the no flow boundary, both sets of type curves have three distinct slopes. These slopes characterize: 1) flow in an infinite reservoir, 2) presence of the no flow, and 3) the constant-pressure boundaries. When the well is closer to the constant pressure boundary, the type curves show two distinct slopes. These correspond to: 1) flow in an infinite reservoir, and 2) the presence of a constant pressure boundary. The type curves can be used to match actual pressure drawdown data and determine the drainage area and relative well location with respect to physical boundaries.展开更多
The extraction kinetics of Ce（Ⅳ） and Ce（Ⅳ）-F^- mixture systems from sulfuric solutions to n-heptane solution containing Bif-ILE[A336][P204]（[trialkylmethylammonium][di-2-ethylhewanxylphosphinate]） with a const...The extraction kinetics of Ce（Ⅳ） and Ce（Ⅳ）-F^- mixture systems from sulfuric solutions to n-heptane solution containing Bif-ILE[A336][P204]（[trialkylmethylammonium][di-2-ethylhewanxylphosphinate]） with a constant interfacial area cell with laminar flow were studied,just to elucidate the extraction mechanism and the mass transfer models.The data were analyzed in terms of pseudo-first-order constants.The effects of stirring speed,specific interfacial area and temperature on the extraction rate in both systems were discussed,suggesting that the extractions were mixed bulk phases-interfacial control process.Supported by the experimental data,the corresponding rate equations for Ce（Ⅳ） extraction system and Ce（Ⅳ）-F^- mixture extraction system were obtained.The experimental results indicated the rate-controlling step.The kinetics model was deduced from the rate-controlling step and consistent with the rate equation.展开更多
基金Supported by the National Natural Science Foundation of China(51574213,51074150)the Key Project of Chinese National Programs for Fundamental Research and Development(2012CBA01203,2013CB632602)
文摘A novel constant interfacial area cell(NCIAC),by spatially separating the agitation from liquid flow circulation of organic and aqueous two phases,was suggested to obtain detailed kinetic data for Er(Ⅲ) extraction from chloride medium by 2-ethyl-hexyl-phosphonic acid mono-(2-ethylhexyl) ester(EHEHPA).Different from the traditional Lewis cell and the constant interfacial area cell with laminar flow,the concentrations of Er(Ⅲ) in organic and aqueous two phases were uniform,and the stability of the interfacial area between the two phases could be controlled effectively.Therefore,the special requirements for the design of agitators in the traditional Lewis cell and the constant interfacial area cell for minimizing the influence of diffusion resistance could be avoided.Experimental results indicated that the extraction kinetics was mainly affected by the aqueous flow rate,interfacial area between organic and aqueous two phases,and the aqueous p H values.An extraction kinetic equation was suggested based on the experimental data.
文摘Firstly, sample square-circular transition tube along straight central route was modeled on CATIA software. The parameters are as follows： let the tube length is L, and the constant cross section area is S, and S = πR^2 = a2, in which R stands for the circle radius on one end, and a the square side length on the other end; set up the coordinate system with OX axis on the central route in which the origin O is on centroid of the square end and assume the cross section size at x as the square shaped with all four comers filleted in radius r which is proportional to x, that is, the linear slope of r is R/L, thus, both values r and square side length ax can be attained on the constant cross section area assumption. Secondly, some sample polygonal-circular transition tubes along straight, circular and helical central route were implemented similarly. Thirdly, numerical analysis of stress and displacement of these tubes were carried out on MSC/PATRAN software which are important to the distribution of turbulent flow and the layout of these transitional tube structures.
文摘Pressure transient analysis has been used to evaluate performance of a well located between one sealing fault and one constant pressure boundary. Type curves were generated by determining 1) dimensionless pressure and 2) rate of change of dimensionless pressure drop with respect to dimensionless time. When the well is located closer to the no flow boundary, both sets of type curves have three distinct slopes. These slopes characterize: 1) flow in an infinite reservoir, 2) presence of the no flow, and 3) the constant-pressure boundaries. When the well is closer to the constant pressure boundary, the type curves show two distinct slopes. These correspond to: 1) flow in an infinite reservoir, and 2) the presence of a constant pressure boundary. The type curves can be used to match actual pressure drawdown data and determine the drainage area and relative well location with respect to physical boundaries.
基金Project (2012CBA01202) supported by the National Basic Research Program of ChinaProject (51174184) supported by the National Natural Science Foundation of China+2 种基金Project (KGZD-EW-201-1) supported by the Key Research Program of the Chinese Academy of SciencesProject (BK2013030) supported by Science and Technology Plan of Nantong City,ChinaProject (RERU2014016) supported by Open Subject of Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,China
文摘The extraction kinetics of Ce（Ⅳ） and Ce（Ⅳ）-F^- mixture systems from sulfuric solutions to n-heptane solution containing Bif-ILE[A336][P204]（[trialkylmethylammonium][di-2-ethylhewanxylphosphinate]） with a constant interfacial area cell with laminar flow were studied,just to elucidate the extraction mechanism and the mass transfer models.The data were analyzed in terms of pseudo-first-order constants.The effects of stirring speed,specific interfacial area and temperature on the extraction rate in both systems were discussed,suggesting that the extractions were mixed bulk phases-interfacial control process.Supported by the experimental data,the corresponding rate equations for Ce（Ⅳ） extraction system and Ce（Ⅳ）-F^- mixture extraction system were obtained.The experimental results indicated the rate-controlling step.The kinetics model was deduced from the rate-controlling step and consistent with the rate equation.
文摘为了更好地提高核磁共振图像(magnetic resonance image,MRI)重构质量,提出了一种基于高阶和非局部全变分的混合重构算法。首先,该算法采用全局梯度提取法分离待重构MRI图像的平滑区和边缘纹理区;在算法的每次迭代过程中,先对平滑区采用高阶全变分(higher degree total variation,HDTV)算法,然后对边缘纹理区采用非局部全变分(non-local total variation,NLTV)算法;最后,将算法迭代结束后的平滑区和边缘纹理区图像合并就是重构图像。实验发现,该算法的重构效果大大优于TV(total variation,全变分)、HDTV、NLTV算法,其重构图像既能有效地滤除噪声和保留纹理细节信息,又大大抑制了全变分的阶梯效应。
