The 'earthquake nucleation' is discussed in this paper. The acceleration is a property of the nucleation phase and is a necessary condition of earthquake instability too. If the acceleration property of this n...The 'earthquake nucleation' is discussed in this paper. The acceleration is a property of the nucleation phase and is a necessary condition of earthquake instability too. If the acceleration property of this nucleating process is described by the equation dΩ/dt=C/(tf-t)n, the process can be summarized briefly that the rate of cumulative seismic release is proportional to the inverse power of the remaining time to failure. Based on this principle, the foreshock sequence of the 1975 Haicheng earthquake with Ms7.3, was analysed backward. It is stated clearly that the time-to-failure and magnitude of the mainshock can be predicted successfully if the coefficient r2 attains to the maximum. In the estimation of mainshock time, the error can generally be less than, or far less than,one-half the remaining time between the time of the last used data point and the mainshock.展开更多
The rhizomes of Matteuccia orientalis(HOOK.)TREV(Dong Fang Jia Guo Jue)have been used as traditional folk remedies for rheumatalgia and traumatic hemorrhage in China.Our earlier work on the 50%EtOH eluate from the Dia...The rhizomes of Matteuccia orientalis(HOOK.)TREV(Dong Fang Jia Guo Jue)have been used as traditional folk remedies for rheumatalgia and traumatic hemorrhage in China.Our earlier work on the 50%EtOH eluate from the Diaion HP 20 macroporous adsorption resin column chromatography(CC)of the 60%EtOH extract of展开更多
Hot deformation behavior of a novel Ni-Cr-Mo-B heavy plate steel was studied by hot compression tests,which were conducted on a Gleeble-3800thermo-mechanical simulator corresponding to the temperature range of850-1 15...Hot deformation behavior of a novel Ni-Cr-Mo-B heavy plate steel was studied by hot compression tests,which were conducted on a Gleeble-3800thermo-mechanical simulator corresponding to the temperature range of850-1 150℃ with the strain rates of 0.01-10s-1 and the true strain of 0.8.The results suggest that the majority of flow curves exhibit a typical dynamic recrystallization（DRX）behavior with an apparent single peak stress followed by agradual fall towards a steady-state stress.Important characteristic parameters of flow behavior as critical stress/strain for initiation of DRX and peak and steady-state stress/strain were derived from curves of strain hardening rate versus stress and stress versus strain,respectively.Material constants of the investigated steel were determined based on Arrhenius-type constitutive equation,and then the peak stress was predicted by the equation with the hot deformation activation energy of 379 139J/mol,and the predicted values agree well with the experimental values.Furthermore,the effect of Zener-Hollomon parameter on the characteristic points of flow curves was studied using the power law relation,and the ratio of critical stress and strain to peak stress and strain were found to be 0.91and0.46,respectively.展开更多
文摘The 'earthquake nucleation' is discussed in this paper. The acceleration is a property of the nucleation phase and is a necessary condition of earthquake instability too. If the acceleration property of this nucleating process is described by the equation dΩ/dt=C/(tf-t)n, the process can be summarized briefly that the rate of cumulative seismic release is proportional to the inverse power of the remaining time to failure. Based on this principle, the foreshock sequence of the 1975 Haicheng earthquake with Ms7.3, was analysed backward. It is stated clearly that the time-to-failure and magnitude of the mainshock can be predicted successfully if the coefficient r2 attains to the maximum. In the estimation of mainshock time, the error can generally be less than, or far less than,one-half the remaining time between the time of the last used data point and the mainshock.
文摘The rhizomes of Matteuccia orientalis(HOOK.)TREV(Dong Fang Jia Guo Jue)have been used as traditional folk remedies for rheumatalgia and traumatic hemorrhage in China.Our earlier work on the 50%EtOH eluate from the Diaion HP 20 macroporous adsorption resin column chromatography(CC)of the 60%EtOH extract of
基金Sponsored by National Natural Science Foundation of China(51071019,51371030)National High Technology Research and Development Program of China(2013AA031601)National Key Technology Research and Development Program of the Ministry of Science and Technology of China(2011BAE25B01)
文摘Hot deformation behavior of a novel Ni-Cr-Mo-B heavy plate steel was studied by hot compression tests,which were conducted on a Gleeble-3800thermo-mechanical simulator corresponding to the temperature range of850-1 150℃ with the strain rates of 0.01-10s-1 and the true strain of 0.8.The results suggest that the majority of flow curves exhibit a typical dynamic recrystallization（DRX）behavior with an apparent single peak stress followed by agradual fall towards a steady-state stress.Important characteristic parameters of flow behavior as critical stress/strain for initiation of DRX and peak and steady-state stress/strain were derived from curves of strain hardening rate versus stress and stress versus strain,respectively.Material constants of the investigated steel were determined based on Arrhenius-type constitutive equation,and then the peak stress was predicted by the equation with the hot deformation activation energy of 379 139J/mol,and the predicted values agree well with the experimental values.Furthermore,the effect of Zener-Hollomon parameter on the characteristic points of flow curves was studied using the power law relation,and the ratio of critical stress and strain to peak stress and strain were found to be 0.91and0.46,respectively.
