The stochastic boundary element method(SBEM)is developed in this paper for 3D problems with body forces and reliability analysis of engineering structures.The integral equations of SBEM are established by the approach...The stochastic boundary element method(SBEM)is developed in this paper for 3D problems with body forces and reliability analysis of engineering structures.The integral equations of SBEM are established by the approach of partial derivation with respect to stochastic variables,considering the yield limit,rotation speeds and material density to be the fundamental stochastic variables.Through analyzing a numerical example and a turbo-disk of an aeroengine,the results show that the method developed is successful.展开更多
In this paper, the reliability of orthotropic plate and beams composite structures, which is under the actions of the stochastic loading and stochastic boundary conditions, have been analyzed by stochastic boundary el...In this paper, the reliability of orthotropic plate and beams composite structures, which is under the actions of the stochastic loading and stochastic boundary conditions, have been analyzed by stochastic boundary element method. First, the boundary integral equation of orthotropic plate and beams composite structures is given in this paper, and then based on the stochastic boundary element method, the method for reliability analysis of stochastic structures is establishes and formulas for computation of reliability index of orthotropic plate and beams composite structures are obtained. The computed examples show the efficient of the method used in this paper.展开更多
An improved version of the regular boundary element method, the artificial boundary node approach, is derived. A simple contact algorithm is designed and implemented into the direct boundary element, regular boundary ...An improved version of the regular boundary element method, the artificial boundary node approach, is derived. A simple contact algorithm is designed and implemented into the direct boundary element, regular boundary element and artificial boundary node approaches. The exisiting and derived approaches are tested using some case studies. The results of the artificial boundary node approach are compared with those of the existing boundary element program, the regular element approach, ANSYS and analytical solution whenever possible. The results show the effectiveness of the artificial boundary node approach for a wider range of boundary offsets.展开更多
This work presents a numerical methodology for modeling the Winkler supports and nonlinear conditions by proposing new boundary conditions. For the boundary conditions of Winkler support model, the surface tractions a...This work presents a numerical methodology for modeling the Winkler supports and nonlinear conditions by proposing new boundary conditions. For the boundary conditions of Winkler support model, the surface tractions and the displacements normal to the surface of the solid are unknown, but their relationship is known by means of the ballast coefficient, whereas for nonlinear boundary conditions, the displacements normal to the boundary of the solid are zero in the positive direction but are allowed in the negative direction. In those zones, detachments of nodes might appear, leading to a nonlinearity, because the number of nodes that remain fixed or of the detached ones (under tensile tractions) is unknown. The proposed methodology is applied to the 3D elastic receding contact problem using the boundary element method. The surface t r actions and the displacements of the common int erface bet ween the two solids in contac t under the influence of different supports are calculated as well as the boundary zone of the solid where the new boundary conditions are applied. The problem is solved by a double-iterative met hod, so in the final solut ion, t here are no t r act ions or pene trations between the two solids or at the boundary of the solid where the nonlinear boundary conditions are Simula ted. The effectiveness of the proposed method is verified by examples.展开更多
The formulation of boundary element method for handling contact problems with friction and the technique for high speed contact analysis are presented. This formulation is based on the idea of modifying the length of...The formulation of boundary element method for handling contact problems with friction and the technique for high speed contact analysis are presented. This formulation is based on the idea of modifying the length of contact elements without altering the total number of elements. The high precision of solution and high speed analysis are verified according to the results of conventional method and analysis method.展开更多
A scheme of boundary element method for moving contact of two-dimensional elastic bodies using conforming discretization is presented. Both the displacement and the traction boundary conditions are satisfied on the co...A scheme of boundary element method for moving contact of two-dimensional elastic bodies using conforming discretization is presented. Both the displacement and the traction boundary conditions are satisfied on the contacting region in the sense of discretization. An algorithm to deal with the moving of the contact boundary on a larger possible contact region is presented. The algorithm is generalized to rolling contact problem as well. Some numerical examples of moving and rolling contact of 2D elastic bodies with or without friction, including the bodies with a hole-type defect, are given to show the effectiveness and the accuracy of the presented schemes.展开更多
A solution of probabilistic FEM for elastic-plastic materials is presented based on the incremental theory of plasticity and a modified initial stress method. The formulations are deduced through a direct differentiat...A solution of probabilistic FEM for elastic-plastic materials is presented based on the incremental theory of plasticity and a modified initial stress method. The formulations are deduced through a direct differentiation scheme. Partial differentiation of displacement, stress and the performance function can be iteratively performed with the computation of the mean values of displacement and stress. The presented method enjoys the efficiency of both the perturbation method and the finite difference method, but avoids the approximation during the partial differentiation calculation. In order to improve the efficiency, the adjoint vector method is introduced to calculate the differentiation of stress and displacement with respect to random variables. In addition, a time-saving computational method for reliability index of elastic-plastic materials is suggested based upon the advanced First Order Second Moment (FOSM) and by the usage of Taylor expansion for displacement. The suggested method is also applicable to 3-D cases.展开更多
Based on the theory of reliability-based structural shape optimization, exact expressions of the sensibility using the stochastic finite element method for contact problems were derived in detail, and the basic steps ...Based on the theory of reliability-based structural shape optimization, exact expressions of the sensibility using the stochastic finite element method for contact problems were derived in detail, and the basic steps of structural optimization were given. A coattail-type tenon/mortise of an aero-engine was optimized. In this model, the maximum equivalent stress of the nodes on the boundary of the tenon was the objective function; the width of tooth’s neck and the side surface’s slope angle of a tenon were design variables, with constraints of tension stress, extrusion stress and reliability index. The result showed that the distributions of the contact pressure between tenon and mortise, the equivalence stress and reliability index were more reasonable. It validates the correctness of the optimization model and the reliability-based structural shape optimization, and provides valuable references for structural design of the tenon/mortise.展开更多
The development of two boundary element algorithms for solving 3-D, frictional, and linear elastostatic contact problems is reported in this paper. The algorithms employ nonconforming discreti- zations for solving 3...The development of two boundary element algorithms for solving 3-D, frictional, and linear elastostatic contact problems is reported in this paper. The algorithms employ nonconforming discreti- zations for solving 3-D boundary element models, which provide much needed flexibility in the bound- ary element modeling for 3-D contact problems. These algorithms are implemented in a new 3-D boundary element code and verified using several examples. For the numerical examples studied, the results using the new boundary element algorithms match very well with the results using a commercial finite element code, and clearly demonstrate the feasibility of the new boundary element approach for 3-D contact analysis.展开更多
文摘The stochastic boundary element method(SBEM)is developed in this paper for 3D problems with body forces and reliability analysis of engineering structures.The integral equations of SBEM are established by the approach of partial derivation with respect to stochastic variables,considering the yield limit,rotation speeds and material density to be the fundamental stochastic variables.Through analyzing a numerical example and a turbo-disk of an aeroengine,the results show that the method developed is successful.
文摘In this paper, the reliability of orthotropic plate and beams composite structures, which is under the actions of the stochastic loading and stochastic boundary conditions, have been analyzed by stochastic boundary element method. First, the boundary integral equation of orthotropic plate and beams composite structures is given in this paper, and then based on the stochastic boundary element method, the method for reliability analysis of stochastic structures is establishes and formulas for computation of reliability index of orthotropic plate and beams composite structures are obtained. The computed examples show the efficient of the method used in this paper.
文摘An improved version of the regular boundary element method, the artificial boundary node approach, is derived. A simple contact algorithm is designed and implemented into the direct boundary element, regular boundary element and artificial boundary node approaches. The exisiting and derived approaches are tested using some case studies. The results of the artificial boundary node approach are compared with those of the existing boundary element program, the regular element approach, ANSYS and analytical solution whenever possible. The results show the effectiveness of the artificial boundary node approach for a wider range of boundary offsets.
文摘This work presents a numerical methodology for modeling the Winkler supports and nonlinear conditions by proposing new boundary conditions. For the boundary conditions of Winkler support model, the surface tractions and the displacements normal to the surface of the solid are unknown, but their relationship is known by means of the ballast coefficient, whereas for nonlinear boundary conditions, the displacements normal to the boundary of the solid are zero in the positive direction but are allowed in the negative direction. In those zones, detachments of nodes might appear, leading to a nonlinearity, because the number of nodes that remain fixed or of the detached ones (under tensile tractions) is unknown. The proposed methodology is applied to the 3D elastic receding contact problem using the boundary element method. The surface t r actions and the displacements of the common int erface bet ween the two solids in contac t under the influence of different supports are calculated as well as the boundary zone of the solid where the new boundary conditions are applied. The problem is solved by a double-iterative met hod, so in the final solut ion, t here are no t r act ions or pene trations between the two solids or at the boundary of the solid where the nonlinear boundary conditions are Simula ted. The effectiveness of the proposed method is verified by examples.
文摘The formulation of boundary element method for handling contact problems with friction and the technique for high speed contact analysis are presented. This formulation is based on the idea of modifying the length of contact elements without altering the total number of elements. The high precision of solution and high speed analysis are verified according to the results of conventional method and analysis method.
基金The project supported by the National Natural Science Foundation of China (19772025)
文摘A scheme of boundary element method for moving contact of two-dimensional elastic bodies using conforming discretization is presented. Both the displacement and the traction boundary conditions are satisfied on the contacting region in the sense of discretization. An algorithm to deal with the moving of the contact boundary on a larger possible contact region is presented. The algorithm is generalized to rolling contact problem as well. Some numerical examples of moving and rolling contact of 2D elastic bodies with or without friction, including the bodies with a hole-type defect, are given to show the effectiveness and the accuracy of the presented schemes.
基金The project supported by the Research Grant Council of Hong Kong (HKUST 722196E, 6039197E)the National Natural Science Foundation of China(59809003)the Foundation of University Key Teacher by the Chinese Ministry of Education
文摘A solution of probabilistic FEM for elastic-plastic materials is presented based on the incremental theory of plasticity and a modified initial stress method. The formulations are deduced through a direct differentiation scheme. Partial differentiation of displacement, stress and the performance function can be iteratively performed with the computation of the mean values of displacement and stress. The presented method enjoys the efficiency of both the perturbation method and the finite difference method, but avoids the approximation during the partial differentiation calculation. In order to improve the efficiency, the adjoint vector method is introduced to calculate the differentiation of stress and displacement with respect to random variables. In addition, a time-saving computational method for reliability index of elastic-plastic materials is suggested based upon the advanced First Order Second Moment (FOSM) and by the usage of Taylor expansion for displacement. The suggested method is also applicable to 3-D cases.
基金National Natural Science Foundation of China (5 9875 0 3 7)
文摘Based on the theory of reliability-based structural shape optimization, exact expressions of the sensibility using the stochastic finite element method for contact problems were derived in detail, and the basic steps of structural optimization were given. A coattail-type tenon/mortise of an aero-engine was optimized. In this model, the maximum equivalent stress of the nodes on the boundary of the tenon was the objective function; the width of tooth’s neck and the side surface’s slope angle of a tenon were design variables, with constraints of tension stress, extrusion stress and reliability index. The result showed that the distributions of the contact pressure between tenon and mortise, the equivalence stress and reliability index were more reasonable. It validates the correctness of the optimization model and the reliability-based structural shape optimization, and provides valuable references for structural design of the tenon/mortise.
文摘The development of two boundary element algorithms for solving 3-D, frictional, and linear elastostatic contact problems is reported in this paper. The algorithms employ nonconforming discreti- zations for solving 3-D boundary element models, which provide much needed flexibility in the bound- ary element modeling for 3-D contact problems. These algorithms are implemented in a new 3-D boundary element code and verified using several examples. For the numerical examples studied, the results using the new boundary element algorithms match very well with the results using a commercial finite element code, and clearly demonstrate the feasibility of the new boundary element approach for 3-D contact analysis.
