In-situ remediation of deep petroleum-contaminated soil injection

A computational fluid dynamics(CFD)numerical simulation and field experiment were used to investigate optimal operating parameters of high-pressure jet grouting equipment and clarify the boundary law of the injection area in the remediation process.The response surface optimization design results show that the optimal injection pressure is 30 MPa,rotation speed is 23 r/min,commission speed is 30 cm/min,and the optimal injection diameter is 147.3 cm.Based on the CFD numerical simulation,the ratio of the injection core,turbulent zone,and seepage zone is approximately 1∶4∶2.The distribution law of jet core,turbulence zone and seepage zone at different cross-sections under 30 MPa operating conditions is as follows:The jet core radius is approximately 100 mm,the turbulence zone is mainly distributed at 100 to 500 mm,the seepage zone is mainly distributed at 500 to 700 mm,the seepage zone could be completed within 2 h,and the proportion of the three boundary zones in the injection zone is similar to that of the numerical simulation.This study provides theoretical parameters and practical reference for the remediation of deep pollution via in-situ chemical oxidation in the Loess Plateau soil environment.

Effects of Red Mud on the Remediation of Pb, Zn and Cd in Heavy Metal Contaminated Paddy Soil

[Objective] To study the remediation efficiency of red mud on Pb, Zn and Cd in the heavy metal contaminated paddy soil of mine area, to clarify its remediation mechanism and fertilizer efficiency on heavy metal contaminated soil. [Method] The soil incubation experiment was conducted to study the effect of red mud on the pH values and electrical conductivity （EC）, and the remediation efficiency of red mud on lead （Pb）, zinc （Zn） and cadmium （Cd） in heavy metal contaminated soil. [Result] Red mud addition reduced the content of exchangeable Pb, Zn and Cd in the soil significantly. Compared with the control, when incubated for 30, 60 and 90 d with the red mud dosage of 4% （W/W）, the exchangeable Pb content was decreased by 39.25%, 41.38% and 50.19%; exchangeable Zn content was decreased by 49.26%, 57.32% and 47.16%; and exchangeable Cd content was decreased by 19.53%, 24.06% and 25.70%, respectively. The application of red mud had significant impact on the share of Pb, Zn and Cd contents in five forms, and different amounts of red mud application all reduced the proportion of exchangeable Pb, Zn and Cd to the total Pb, Zn and Cd. In addition, the proportion of exchangeable Pb, Zn and Cd to total Pb, Zn and Cd decreased with the increasing amount of red mud addition. [Conclusion] The study provided references for reasonable application of red mud and reduction of heavy metal pollution in paddy soil.

Study Progress in Remediation of Soil Contaminated by Heavy Metals and Its Application Prospect

Flax is an ideal crop for remedying soil contaminated by heavy metals. It has high tolerance to heavy metals and strong adsorption to heavy metals. Through properly using or adjusting external conditions such as regulator, moisture, fertilizer, microorganisms, and pH value, it is able to improve ability of flax to absorb, trans- fer, and accumulate heavy metals. To improve the ability of flax in remediating heavy metal contaminated soil, it is recommended to strengthen cultivation of flax varieties and screening of germplasm resources, actively carry out studies on tech- nologies of fax remedying heavy metal contaminated soil, implement large-scale and mechanized planting of flax, and promote control of heavy metal contaminated soil.

Remediation of in-situ Leach Mining Contaminated Soil by Amendment-plant Synergism

This study aimed to remediate in-situ leach mining contaminated soil by amendment-plant synergism. The results showed that plant species exhibited ex-tremely significant effects on the concentration of nitrate nitrogen; to be specific, the concentration of nitrate nitrogen in soil planted with wheat was reduced from 692.19 mg/kg to lower than 100 mg/kg; when the mass ratio of amendment to soil reached 3：50 and the amendment particle size was 1-2 mm, the concentration of nitrate ni-trogen in soil planted with wheat was reduced to 43 mg/kg. The amendment type exhibited extremely significant effects on the concentration of ammonium nitrogen; to be specific, when the mass ratio of amendment to soil reached 10：50, the concen-tration of ammonium nitrogen in soil added with 2-3 mm zeolite was reduced from 23 593.75 to 3 300 mg/kg on day 15. Amendments and plants mainly exhibited desorption performance for sulfate radical in soil, and the amendment type extreme-ly significantly affected the concentration of sulfate radical; to be specific, the con-centration of sulfate radical in soil added with limestone increased from 370 mg/kg to 900 mg/kg on day 7.

Potential risks of organic contaminated soil after persulfate remediation:Harmful gaseous sulfur release

Persulfate is considered a convenient and efficient remediation agent for organic contaminated soil.However,the potential risk of sulfur into the soil remediation by persulfate remains ignored.In this study,glass bottles with different persulfate dosages and groundwater tables were set up to simulate persulfate remediation of organic pollutants(aniline).The results found sulfate to be the main end-product(83.0%–99.5%)of persulfate remediation after10 days.Moreover,H_(2)S accounted for 93.4%–99.4%of sulfur reduction end-products,suggesting that H_(2)S was the final fate of sulfur.H_(2)S was released rapidly after one to three days at a maximum concentration of 33.0 ppm,which is sufficient to make a person uncomfortable.According to the fitted curve results,H_(2)S concentration decreased to a safe concentration(0.15 ppm)after 20–85 days.Meanwhile,the maximum concentration of methanethiol reached 0.6 ppm.These results indicated that secondary pollution from persulfate remediation could release harmful gases over a long time.Therefore,persulfate should be used more carefully as a remediation agent for soil contamination.

Research Progress on Remediation Technology Suitable for Farmland Soil Contaminated by Cd

Cd contamination range of farmland soil in China is wide,which has constituted a major threat for food safety and residents＇ health. Via multi-year development,there are more remediation methods suitable for soil contaminated by Cd among the world,but some methods are only suitable for the contaminated sites and indoor research,and can not be applied in large-range contaminated farmland. We analyze the source of Cd in farmland soil. By combining farmland＇s characteristics,three remediation techniques（ low-absorption crops plantation,soil solidification and phytoremediation） and their effects are analyzed,and the existing problems and research prospects of the above techniques are explored. The research could provide reference for restoring farmland soil contaminated by Cd in China,recovering its production function and enhancing food safety standards.

Analysis of Soil Remediation Technology for Heavy Metalcontaminated Sites in Electroplating Enterprises

The advantages and disadvantages of chemical leaching,phytoremediation,in-situ/ex-situ solidification and stabilization,cement kiln co-disposal and safe landfill remediation are analyzed.In addition,the application of chemical leaching and in-situ/ex-situ solidification and stabilization technology in the treatment of heavy metal-contaminated soil in electroplating enterprises in China is introduced in detail to provide reference for the remediation of heavy metal-contaminated soil around electroplating enterprises in China.

Germination Tolerance of Four Mutant Lines of Barley （Hordium vulgare L.）, Wheat （Triticum aestivum L.） and Garden Cress （Lipidium sativum L.） to Crude Oil Contaminated Soil

Phytoremediation shows promise as an alternative low-cost to most remediation methods. This study evaluated the germination of six crops, including four mutant lines of barley （Hordium vulgate L.） （1-9-3, 150-2-3, 1-1-200 and 150-1-5）, wheat （Triticum aestivum L.） and garden cress （Lipidium sativum L.）. This experiment was conducted in laboratory at room temperature. Oil extracted from crude oil contaminated soil was added to sand used in different concentrations （0%, 2%, 4%, 6%, 8% and 10%）. 10 seeds of each crop were sown in ptri-dishes with different treatments separately. For Each treatment four replicates were used in completely randomized design, germination percent was calculated, after one week, shoot and root length were measured. Data were statistically analyzed using MINTAB version 12. The results show that barley mutant line （150-2-3） was significantly different from other entries in germination percent, shoot and root length except mutant line 150-1-5 in germination percent. Results demonstrated that the mutant line 150-2-3 was promising to remediate crude oil contaminated soil.

Research progress and mechanism of nanomaterials-mediated in-situ remediation of cadmium-contaminated soil:A critical review

Cadmium contamination of soil is a global issue and in-situ remediation technology as a promising mitigation strategy has attracted more and more attention.Many nanomaterials have been applied for the in-situ remediation of cadmium-contaminated soil due to their excellent properties of the nano-scale size effect.In this work,recent research progress of various nanomaterials,including carbon nanomaterials,metal-based nanomaterials and nano mineral materials,in the removal of cadmium and in-situ remediation of cadmiumcontaminated soil were systematically discussed.Additional emphases were particularly laid on both laboratory and field restoration effects.Moreover,the factors which can affect the stability of cadmium,main interaction mechanisms between nanomaterials and cadmium in the soil,and potential future research direction were also provided.Therefore,it is believed that this work will ultimately contribute to the myriad of environmental cleanup advances,and further improve human health and sustainable development.

In situ stabilization remediation of cadmium contaminated soils of wastewater irrigation region using sepiolite

The effects of immobilization remediation of Cd-contaminated soils using sepiolite on soil pH, enzyme activities and microbial communities, TCLP-Cd （toxicity characteristic leaching procedure-Cd） concentration, and spinach （Spinacia oleracea） growth and Cd uptake and accumulation were investigated. Results showed that the addition of sepiolite could increase soil pH, while the TCLP-Cd concentration in soil was decreased with increasing sepiolite. The changes of soil enzyme activities and bacteria number indicated that a certain metabolic recovery occurred after the sepiolite treatments, and spinach shoot biomass increased by 58.5%-65.5% in comparison with the control group when the concentration of sepiolite was ~ 10 g/kg. However, the Cd concentrations in the shoots and roots of spinach decreased with an increase in the rate of sepiolite, experiencing 38.4%-59.1% and 12.6%--43.6% reduction, respectively, in contrast to the control. The results indicated that sepiolite has the potential for success on a field scale in reducing Cd entry into the food chain.

Removal of heavy metals from a contaminated soilusing tartaric acid

This study reports the feasibility of remediation of a heavy metal （HM） contaminated soil using tartaric acid, an environmentally-friendly extractant. Batch experiments were performed to test the factors influencing remediation of the HM contaminated soil. An empirical model was employed to describe the kinetics of riM dissolution/desorption and to predict equilibrium concentrations of HMs in soil leachate. The changes of HMs in different fractions before and after tartaric acid treatment were also investigated. Tartaric acid solution containing HMs was regenerated by chestnut shells. Results show that utilization of tartaric acid was effective for removal of riMs from the contaminated soil, attaining 50%-60% of Cd, 40%-50% of Pb, 40%-50% of Cu and 20%-30% of Zn in the pH range of 3.5-4.0 within 24 h. Mass transfer coefficients for cadmium （Cd） and lead （Pb） were much higher than those for copper （Cu） and zinc （Zn）. Sequential fractionations of treated and untreated soil samples showed that tartaric acid was effective in removing the exchangeable, carbonate fractions of Cd, Zn and Cu from the contaminated soil. The contents of Pb and Cu in Fe-Mn oxide fraciton were also significantly decreased by tartaric acid treatment. One hundred milliliters of tartaric acid solution containing HMs could be regenerated by 10 g chestnut shells in a batch reactor. Such a remediation procedure indicated that tartaric acid is a promising agent for remediation of HM contaminated soils. However, further research is needed before the method can be practically used for in situ remediation of contaminated sites.

An overview of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils

The global problem of petroleum contamination in soils seriously threatens environmental safety and human health.Current studies have successfully demonstrated the feasibility of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils due to their easy implementation,environmental benignity,and enhanced removal efficiency compared to bioremediation.This paper reviewed recent progress and development associated with bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils.The working principles,removal efficiencies,affecting factors,and constraints of the two technologies were thoroughly summarized and discussed.The potentials,challenges,and future perspectives were also deliberated to shed light on how to overcome the barriers and realize widespread implementation on large scales of these two technologies.

Overview of Patented Technologies for Remediation of Soil Pollution

Soil, an important material basis for human activities, is an indispensable natural rasource that is difficult to regenerate. It is also an important part of human ecological environment. Currently, soil pollution has affected China＇s agricultural production and threatened human health and ecological safety, so it has been paid more attention to by the people and has become a hot spot in environmental field. Through continuous research, a variety of soil remediation patents and technologies also emerge. Here, by retrieving the main words through the website （www. soopat. corn） and Chinese patent net, types of soil pollution and remediation technologies under the authorization status of the patents were analyzed, and the major species of soil pollutants and soil remediation technologies were reviewed.

Evaluation of remediation process with soapberry derived saponin for removal of heavy metals from contaminated soils in Hai-Pu, Taiwan

The use of a biodegradable natural plant-based surfactant extracted from soapberry is proposed for the remediation of Ni, Cr and Mn from industrial soil site in Hai-Pu, Taiwan. Batch experiments were performed under variation of fundamental factors （saponin concentration, pH, and incubation time） for metal remediation. Removal of Ni and Mn were increased with increasing saponin concentration （0.015-0.150 g/L）, whereas the removal of Cr was increased upto 0.075 g/L saponin. The Ni, Cr and Mn were removed significantly （p 〈 0.05） at near to the neutral and slightly acidic （pH 5 to 8） conditions. Removal efficiency of Ni （99%） from the soil was found to be greater than that of Cr （73%） or Mn （25%） in the presence of saponin at a concentration of 0.150 g/L at pH 5. The removal percentage increased with incubation time where the removal of Ni was faster than that of Cr and Mn. The result indicates the feasibility of cco-friendly removal of heavy metal （Ni, Cr and Mn） from industrial soil by soil washing process in presence of plant derived saponin.

Mitigation and remediation technologies for organic contaminated soils

Organic contaminated soils have become a widespread environmental problem,which may lead to a great threat to the quality of agricultural production and to human health.Physical,chemical,and biological technologies have been employed for the mitigation and remediation of organic contaminated soils.This paper reviews the progress of mitigation and remediation technologies for organic contaminated soils and suggests two different strategies for the mitigation of‘slightlycontaminated’agricultural soils and the remediation of‘heavily-contaminated’soils/sites,respectively.On this basis,directions for future research in this field are suggested.

Review on utilization of biochar for metal-contaminated soil and sediment remediation

Biochar is a carbon-neutral or even carbon-negative material produced through thermal decomposition of plant-and animal-based biomass under oxygen-limited conditions.Recently, there has been an increasing interest in the application of biochar as an adsorbent, soil ameliorant and climate mitigation approach in many types of applications.Metal-contaminated soil remediation using biochar has been intensively investigated in small-scale and pilot-scale trials with obtained beneficial results and multifaceted effects.But so far, the study and application of biochar in contaminated sediment management has been very limited, and this is also a worldwide problem. Nonetheless, there is reason to believe that the same multiple benefits can also be realized with these sediments due to similar mechanisms for stabilizing contaminants. This paper provides a review on current biochar properties and its use as a sorbent/amendment for metal-contaminated soil/sediment remediation and its effect on plant growth, fauna habits as well as microorganism communities. In addition, the use of biochar as a potential strategy for contaminated sediment management is also discussed, especially as regards in-situ planning. Finally, we highlight the possibility of biochar application as an effective amendment and propose further research directions to ensure the safe and sustainable use of biochar as an amendment for remediation of contaminated soil and sediment.

Ecological processes, remediation and regulation of contaminated soils

Land is used for agricultural production, industrial development, urban construction, and environmental beautification, thus soil environment is an important component of living ecosystems for human survival.……

Study of polluted soil remediation based on freezing and thawing cycles

It is generally known that soil pollution poses a terrible hazard to the environment, but the present techniques of contaminated soil remediation cannot control this growing threat. This paper compares the pollutant extraction efficiency of traditional pumping and treating, which is a typical washing technology for the remediation of contaminated soils, with methods that utilize freeze-thaw cycles. In the soil freezing process, water shifts from unfrozen soils to the freezing front, and the permeability of soil will be enhanced under certain temperature gradients and water conditions. Therefore, this paper discusses the purification of contaminated soil through freeze-thaw action. We conducted a cleansing experiment on clay and silica sand infused with NaCl（simulation of heavy metals） and found that the efficiency of purification was enhanced remarkably in the latter by the freeze-thaw action. To assess the effective extraction of DNAPLs in soil, we conducted an experiment on suction by freezing, predicated on the different freezing points of moisture and pollutants. We found that the permeability coefficient was significantly increased by the freezing-thawing action, enabling the DNAPL contaminants to be extracted selectively and effectively.

Study on Obstacles to Continuous Cropping of Vegetables and Soil Remediation Technology

Firstly,this paper analyzes the cause of obstacles to continuous cropping of vegetables,and then introduces the soil ecological remediation technology used for overcoming obstacles to continuous cropping of vegetables. Finally,this paper analyzes the effect of applying soil ecological remediation technology in overcoming obstacles to continuous cropping of vegetables.