CONTENT AND DISTRIBUTION OF TRACE ELEMENTS IN SOILS OF THE DAM RIVER AND TUOTUO RIVER BASINS

Natural contents and distribution of trace elements in soils of the Dam River and Tuotuo River basins are demonstrated in this paper. By using contrasting methods. it is found that the content of trace elements of soil in the region is at the lower limit of the world's soil content level, that the tendency of the average trace element content in the four main types of soil is shown as: alpine mountain meadow soil>marsh soil>alpine mountain steppe soil> alpine mountain cryogenic soil. the average content of trace elements such as Cr. Co, Zn, Cu, Hg, Pb, Mo, Mn and Ni in the Dam River basin is higher than that of the Tuotuo River basin except that of the elements Ba and Sr. In addition. through correlation analysis. the relationship of intergrowth and association among soil elements are revealed.

Contents of Trace Metal Elements in Cow Milk Impacted by Different Feedstuffs

Feedstuff intake plays key role in impacting the yield and quality of milk. In this study, we discussed the contents of trace metal elements in cow milk impacted by different feedstuffs. We detected the contents of Pb, Cd, As, Cu, Mg, Ca, Fe and Zn in different feedstuffs and milk by atomic absorption spectrophotometry. The determinations of Pb, Cd and As contents were by graphite furnace A_AS and Cu, Mg, Ca, Fe and Zn was by flame atomic absorption spectrometry. The results showed that Pb, Cd, As and Cu presented in feedstuffs, but Pb, Cd and As were lowly detected in milk samples, and Cu was not detected in milk samples. The content of Mg in concentrates was lower than that in forages. However, the content of Mg in milk from concentrate feed was higher than that in forage feed. This suggested that the utilization of Mg in concentrate feed was higher than that in forage feed. The contents of Ca and Zn were opposite to Mg, and the utilization of Ca and Zn in forage feed was higher than that in concentrate feed. There was no obviously change law of Fe in different feedstuffs and milk samples. The relationship between the contents of trace metal elements in milk to feedstuffs would provide a theoretical basis for dairy farming. It would be useful for improving the milk yield and milk quality of dairy production.

Available Contents of Trace Nutrient Element and Factors Affecting Their Availability in Western Jilin

Based on the assay of the total content and available content of the trace nutrient elements and the soil pH and organic matter of the soil samples,the characteristic of the available content of the trace nutrient elements and their affecting factors are studied. The results show that the available B in western Jilin is in a middle level,the content in Nong'an is higher than that in the others; the available Mn is extremely abundant; the available Cu in Nong'an is obviously higher than other areas,and the content in Da'an differs greatly; the available Zn is in a middle level; the severe shortage of available Mo differs between different areas; and the available Fe is extremely abundant. The available Mn,Cu and Fe have significantly positive correlation with their total content; the available B has significantly positive correlation with pH,and Zn has obviously negative correlation with pH; the available Mn and Fe had significantly positive correlation with soil organic matter.

Study on the Major and Trace Elements in Soil of Yunnan Farmland

In order to investigate the distribution of soil available micronutrients, and provide a theoretical basis for management of fertilizing reasonably on crops, the contents of major and trace elements （P, K, Ca, Mg, Cu, Fe, Zn, and Mn） in farm- land soil collected from Yunnan Province were determined by inductively coupled plasma-mass spectrometry （ICP-MS）, the contents and distribution of major and trace elements were also studied. The results showed that the contents of available P, K were balance, available Ca, Mg were deficient, and available Cu, Fe, Zn, Mn were very plentiful. Major and trace elements distribution of different landform areas were obviously different. The contents of trace elements （Fe, Zn and Mn） of central Yunnan Red Plateau were significantly higher than those of Hengduan Mountains in western Yunnan and those of karst plateau in eastern Yunnan. The contents of available P, K, and Ca gradually declined from west to east, while the content of available Cu rose gradually from west to east. The results are reference value to elements determination and agricultural production in farmland soils.

Correlation Between Chemical Element Contents in Tree Rings and Soils

The annual growth rings of ten trees and the soils near the tree roots were sampled from the mining area of lead-and zinc-dominant metals in the Xixia Mountain, Nanjing, for the determination of chemical element contents. The study results showed that the elemental contents in the tree rings were correlated with those in the soils, i. e., the elemental contents in the tree rings increased with those in the soils, even in the cases of different environments and different tree species. Therefore, a time-concentration sequence could be set up on the basis of determining the elemental contents in the successive annual growth rings of trees to qualitatively reflect the annual variations of relevant elements in the soils, and a time-concentration sequence of elemental contents in soils could also be established in terms of related model to reproduce the dynamic changes of the surroundings.

Chrono-Sequences of Elemental Contents in Tree Ringsand Soils

There exists a logarithmic linear correlation, i. e., In C'(Z, t) = a(Z) + b(Z) ln(Z, t) where Z is the atomicnumber of element and t the year when tree ring grows between the chemical element contents in tree ringsC(Z, t) and those in the soils near the tree roots C'(Z, t).By determining the elemental contents of the annual growth rings of trees, we could establish the chrono-sequences of elemental contents in the tree rings, thus calculating that of the soil, that is, reproducing thedynamic changes of contents of elements in the soil C'(Z, t). The background values of elements in the soilunder site conditions of the tree could be estimated from the minimum C(Z, t_0) in the chrono-sequences ofelemental contents in the tree rings.

Characteristics of mineral element content of alpine vegetation in permafrost region on Qinghai-Tibetan Plateau

The content characteristics of 16 elements （Al, Ca, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, Sr, and Zn） in 23 plant species collected from the Qinghai-Tibetan Plateau permafrost region were investigated using ICP-OES. Results show that the average contents of Ca, K, Mg, Fe and P were higher than 1,000 mg/kg, those of Al, Na, Zn and Cr ranged between 10-1,000 mg/kg and those of Cu, Li, Pb and Mo were less than 10 mg/kg. The levels of Al, Ca, K, Mg and Na were within the scope of the reported terrestrial plant element content, those of Sr, Fe and Cr were higher than the average of the terrestrial plants and the maximum content of Max was higher than the upper limit of the reported Mn content. The main character of the element content was of the Ca〉K type, however, in terms of Cyperaeeae species the element content character was K〉Ca type. The contents of Ca, Li, Mg and Sr in Gramineae and Cyperaeeae species were higher than those in other species and the contents of Ca, K, Mg, Fe, E A1 and Na in all collected plants were higher than those of other elements. Zn had weak variability with the lowest coefficient （i.e., 7.81%）, while other elements had strong variability. The ratio of maximum content to minimum content indicated Ca and K had less change than other elements in the Qinghai-Tibetan Plateau permafrost region. Element content of alpine vegetation in the Qinghai-Tibetan Plateau permafrost region mainly shows a positive correlation, among which the correlation coefficient between Al and Pb, Al and Fe, Mo and Cr, Pb and Fe, Sr and Li were higher than 0.9, and negative correlation had no statistical signifi- cance. The correlation between Al and Fe, Mg, Mn in the Qinghai-Tibetan Plateau permafrost region were consistent with that reported in Kunlun Mountains.

Angular Distribution of Element Contents in Tree Rings and the Environmental Information

Element contents of tree rings and soils near tree roots collected from Deodar cedar (Cedrus deodara (Roxb.) G. Don) and Masson pine (Picks massoniana lamb.) were determined to study the relationship between the angular distribution of element contents in tree rings and the environmental information. The chemical composition and properties of soils are very much complicated, which leads to the non-uniform distribution of the element contents in tree rings. The statistical multi-variable regression method was used to got the information of the tree-centered distribution of element contents in the environment (soil) (C’), C’(z, θj ), from the distribution of element contents in tree rings (C), C(Z, θi), which depends on the plane azimuth angle (θi), i. e., C=C(Z,θi), where Z is the atomic number of the element, with a satisfactory result,though this study is only a primary one.

Morphologic characters and element content during development of Pinus tabuliformis seeds

An embryo classification system for Pinus tabuliformis Carr. was established by time-tracing sam- pling and observation of zygotic embryos. The zygotic embryos were divided into nine stages. Key elements of the zygotic embryo and female gametophyte （FG） tissue of P. tabuliformis were analyzed, using inductively coupled plasma-emission spectroscopy. Several elements--includ- ing aluminum, iron, sodium, and copper--are found in both embryo and FG tissue. Boron, phosphorus, magnesium,zinc, and calcium are also required for zygotic embryo development and therefore accumulated. Manganese is selectively excluded from the embryo. The zygotic embryo development needs a low-sodium and high-potassium nutrition proportion. The results of elemental analysis from zygotic embryos and FGs can provide the mineral targets for optimizing the formulation of culture medium for somatic embryogenesis.

ELEMENTAL CONTENTS IN ORGANS AND TISSUES OF CHINESE ADULT MEN

Objective To provide basis of reference values for relevant parameters of Chinese Reference Man. Methods Eighteen kinds of major organ or tissue samples, including muscle, rib, liver, and so on, were obtained from 4 areas (Hebei, Shanxi, Jiangsu, and Sichuan provinces) with different dietary patterns in China in autopsy of 16 healthy adult men, who had just encountered sudden deaths. At the same time, whole blood samples were collected from 10 volunteers living in each of these areas. The concentrations of 56 elements in these samples were detected by using Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), and Graphite Furnace Atomic Absorption Spectrometry (GF-AAS) techniques. Based on obtained concentrations and reference values of these organ or tissue weights for Chinese Reference Man, the relative elemental burdens in these organs or tissues as well whole body were also estimated. Results The concentrations of 56 elements in 18 main organs or tissues were determined all together and their elemental organ or tissue and whole body burdens were estimated. Furthermore, the distributions of important elements for radiation protection in these organs or tissues were emphatically discussed. Conclusion By summing with past related results, the total results obtained from the series of research may provide more reliable and better representative basis of these reference values for Chinese Reference Man than before.

Macro-and Microelement Contents of Fruiting Bodies of Wild-Edible Mushrooms Growing in the East Black Sea Region of Turkey

Eleven different wild-edible mushroom species growing in the Black Sea region of Turkey were analysed for their metal content. Specimens of mushrooms were gathered in Trabzon, Giresun and Ordu and analyzed for 31 minerals, four of which (Be, Sb, Te and Ti) were not detected. Whereas some minerals including Ag, As, Cd, La, Mo, Pb, Se, Y and Zr were detected in just a few mushroom species, another 18 minerals were found in all 11 species. All metal concentrations were expressed on a dry weight basis (d.w.). With regard to nutritionally important amounts of essential and trace minerals, the metal content (μg/g d.w.) of mushroom samples ranged from 21,800-39,800 for K, 2590-14,000 for P, 268-1600 for Ca, 561-1210 for Mg, 74-829 for Fe, 11.2-321 for Cu, 36.2-241 for Zn, 14.1-76.5 for Mn and 0.13-2.85 for Co. Small amounts of toxic metals such as As, Cd and Pb were found in all 11 mushroom species. L. laccata contained a large amount of As (145 μg/g d.w.). These results show that the investigated mushrooms can be a useful component for human diets because of their high content of many essential minerals and trace elements and low content of toxic metals.

Prediction of ash content of unloaded coal based on a discrete element simulation

Based on analysis of regularity of stacking coal,discrete element simultaneous simulation is adopted to predict the process of unloading coal,which is proved to be effcient in the prediction of ash content.The results show that the altitude of new irregular coal is equal to the income coal volume divided by area of cabin.The distribution of infnitesimal flow velocity helps to induce the motion equation of infnitesimal element,which provides the mathematical model for computer simulation.Swarm,a computer programming language,is utilized in this study.Adaptive infnitesimal stacking algorithm helps settle the diffculties in attainment of infnitesimal elements.The result of simulation is similar to the actual situation,which can accurately predict the ash contents of current time and cumulative time.Coal movement in the cabin is a new project,the result of which can also be applied to other solid particles and the widespread of the result will be highly valued.

Prediction of Chemical Element Contents in Soils

Assuming that the regularity for the dynamic changes of the chrono-sequences of chemical element contents intree rings follows a k-order constant coefficient differential equation and substituting the differential with the differ-ence, we could obtain the inferred value y_(m+k+1) by the formula: Each coefficient c_i in the formula may be ascertained by use of the measured data in the chrono-sequences. Ex-tending the chrono-sequences on the assumption that the regularity of dynamic changes wouldn't change in the nearfuture, the contents of chemical elements in the soils may be predicted in termis of a logarithmic linear correlationmodel. Also, this extension method could be used for the reproduction of the contents of chemical elements in soilsduring different periods of time in the past.

Using Prostatic Fluid Levels of Some Trace Elements and Their Combinations in Non-Invasive and Highly Accurate Screening for Prostate Cancer

Objective: Prostate specific antigen (PSA) does not provide the high reliability and precision that is required for an accurate screening for prostate cancer?(PCa). The aim of our study was to search for a simple, rapid, direct, preferably non-invasive, and highly accurate biomarker and procedure for the screening for PCa. Method: The levels of trace elements (TE) Br, Fe, Rb, Sr,?and Zn were prospectively evaluated in expressed prostatic fluid (EPF). Also?Zn/Br, Zn/Fe, Zn/Rb, Zn/Sr concentration ratios as well as ZnRb and (ZnRb)/Fe concentration combinations were calculated for EPF samples, obtained from 38 apparently healthy males and from 33, 51, and 24 patients with chronic prostatitis, benign prostatic hyperplasia, and PCa, respectively. Measurements were performed using an energy dispersive X-ray fluorescent (EDXRF) microanalysis. Results: It was found that in the EPF of cancerous prostates the levels of Rb, Zn, Zn/Br, Zn/Fe, Zn/Sr, ZnRb, and (ZnRb)/Fe were significantly lower in comparison with those in the EPF of normal, inflamed, and hyperplastic prostates. For example, in comparison hyperplastic?with cancerous prostates p values obtained using Student’s t-test and?Wilcoxon-Mann-Whitney U-test were Conclusions: The levels of TE and their combinations in EPF, obtained by EDXRF, is a fast, reliable, andnon-invasive diagnostic tool that can be successfully used by local, non- urologist physicians at the point-of-care to provide a highly effective PCa screening and as an additional confirmatory test before a prostate gland biopsy.

Comparison of 66 chemical element contents in normal and benign hyperplastic prostate

Objective:The aim of this study was to clarify the differences between the prostatic levels of chemical elements in patients with benign prostatic hyperplasia(BPH)and healthy male.Methods:We evaluated the prostatic level of 66 chemical elements in 43 patients with BPH and 37 healthy males.Measurements were performed using five instrumental analytical methods.Results:In the hyperplastic prostates,we have observed a significant increase in the mean level of Bi,Cr,Hg,K,Sb,and Se accompanied a significant decrease in the mean level of Al,Ce,Cs,Dy,Er,Gd,Ho,La,Mo,Nd,Pb,Pr,Sm,Sn,Tb,Tm,U,and Y.No differences were found in the mean prostatic level of other chemical elements including Ag,Al,Au,B,Ba,Be,Br,Ca,Cd,Co,Cu,Fe,Li,Mg,Mn,Na,Nb,Ni,P,Rb,S,Sc,Si,Th,Ti,Tl,Yb,Zn,and Zr between BPH patients and healthy males.Conclusions:The finding of chemical element contents and correlation between pairs of chemical element mass fractions indicates that there is a great disturbance of prostatic chemical element metabolism in BPH gland.Trace elements Bi,Cr,Hg,K,Sb,and Se may be regarded as the possible tissue biomarkers of hyperplastic transformation of prostate gland.Obtained data did not confirm a critical role of Cd and Pb accumulation in the pathogenesis of BPH.A potential age-related Zn,Fe,and Se deficiency in the prostate tissue has not been found as being involved in the etiology of BPH.

Influence of wind-blown sand content on the mechanical quality state of ballast bed in sandy railways

During the operation of sandy railways, the challenge posed by wind-blown sand is a persistent issue. An in-depth study on the influence of wind-blown sand content on the macroscopic and microscopic mechanical properties of the ballast bed is of great significance for understanding the potential problems of sandy railways and proposing reasonable and adequate maintenance and repair strategies. Building upon existing research, this study proposes a new assessment indicator for sand content. Utilizing the discrete element method(DEM) and fully considering the complex interactions between ballast and sand particles, three-dimensional(3D) multi-scale analysis models of sandy ballast beds with different wind-blown sand contents are established and validated through field experiments. The effects of varying wind-blown sand content on the microscopic contact distribution and macroscopic mechanical behavior(such as resistance and support stiffness) of ballast beds are carefully analyzed. The results show that with the increase in sand content, the average contact force and coordination number between ballast particles gradually decrease, and the disparity in contact forces between different layers of the ballast bed diminishes. The longitudinal and lateral resistance of the ballast bed initially decreases and then increases, with a critical point at 10% sand content. At 15% sand content, the lateral resistance is mainly shared by the ballast shoulder. The longitudinal resistance sharing ratio is always the largest on the sleeper side, followed by that at the sleeper bottom, and the smallest on the ballast shoulder. When the sand content exceeds 10%, the contribution of sand particles to stiffness significantly increases, leading to an accelerated growth rate of the overall support stiffness of the ballast bed, which is highly detrimental to the long-term service performance of the ballast bed. In conclusion, it is recommended that maintenance and repair operations should be promptly conducted when the sand content of the ballast bed reaches or exceeds 10%.

我国“双一流”建设高校高层次人才政策研究

本研究抽样选取我国4个地区17所“双一流”建设高校高层次人才政策文本,构建“政策工具政策内容要素”二维分析框架,探讨高层次人才政策工具和政策内容要素的组合方式与地区差异。研究发现,我国“双一流”建设高校高层次人才政策的环境型政策工具使用不足,尤其是西部高校的环境型政策工具亟待加强;需求型政策工具中教师培育政策子工具使用不足;南部、西部和北部地区高校对人才培养政策的关注度不够。我国“双一流”建设高校在制定高层次人才政策时,应适度增强环境型政策工具的运用,进一步完善和充实教师培育相关政策;西部地区高校应改善办公实验条件,提高团队建设水平;南部、西部和北部高校应加快制定人才培养相关政策。

REE Contents in Topsoil on the Loess Plateau and Effects of REE Applying on Crops

Eight rare earth elements(REE) in 104 topsoil samples collected from the Loess Plateau has been determined by using of INAA. The regional distribution of REE contents and its effectiveness of REE applying on crops in this area are discussed. The preliminary results showed that the mean concentration of most REE in this area approaches to those of China as a whole; and REE content in main type of soil of the Loess Plateau is as follows: gray cinnamon forest soil, Lou soil(stratified old manured loessal soil)> Heilu soil(dark loessal soil) . loessal soil>sierozem, and similar with the distribution pattern of soil clay contents in the soil which decrease gradually from southeast to northwest. This area may be suitable to apply REE in agriculture production.

Influence of boron contents on properties of AlMgB films prepared by RF magnetron sputtering

Ternary AlMgB thin films were synthesized on silicon (100) substrate at 573 K by radio frequency (RF) magnetron sputtering method using one Al/Mg co-target and one boron target. The thickness of the as-deposited thin film was controlled to 500 nm by adjusting deposition time. The influences of sputtering powers on the elemental contents and structural and mechanical properties were investigated by electron probe microanalysis (EPMA), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and nanoindentation system. At the same time, the ball-on-disk tribometer was used to measure the friction behavior of the films. Experimental results indicate that the as-deposited boron-rich films are primarily amorphous structure and possess a dramatic high hardness up to 39 GPa with 99.03 at.% boron. Obviously, it has exceeded the hardness value of 32 GPa of pure AlMgB 14 bulk material prepared by sintering method. Furthermore, the friction coefficients of the thin films exhibit an average value as low as 0.3, which is considered as the effect of self-lubricating.