The incompressible lattice Bhatnager-Gross-Krook (BGK) model of computational fluid dynamics, from which the unsteady incompressible Navier-Stokes equations can be exactly derived with the limit of small Mach number...The incompressible lattice Bhatnager-Gross-Krook (BGK) model of computational fluid dynamics, from which the unsteady incompressible Navier-Stokes equations can be exactly derived with the limit of small Mach number, was established in continuous casting mold. An asymmetric flow pattern in the two-dimensional central plane of continuous slab casting mold was simulated, and the flow pattern is not stationary but changes over frequently if the Reynolds number is larger than 3000 or so. The results are found to be in excellent agreement with previous experimental results.展开更多
In order to develop super-board and super-thick slabs, the flow and temperatur fields were studied in slab continuous casting molds under different practical conditions, such as slab dimensions, with-drawing slab spee...In order to develop super-board and super-thick slabs, the flow and temperatur fields were studied in slab continuous casting molds under different practical conditions, such as slab dimensions, with-drawing slab speed, design of nozzles, and superheat tempera-ture. The results showed that it is preferred to incline nozzle bores downwards and the submerged depth of the nozzles is best kept be-tween 250-300 mm. In addition, the solidified shell is thicker at the wide face than that at the narrow face, while the thin points alongthe wide face ekist both in the center and in the some area toward each respective end.展开更多
Through physical modeling and numerical simulation,the flow field in a slab continuous casting mold with electromagnetic stirring is measured under different casting parameters and stirring currents. To qualitatively ...Through physical modeling and numerical simulation,the flow field in a slab continuous casting mold with electromagnetic stirring is measured under different casting parameters and stirring currents. To qualitatively evaluate the flow field in the mold, two indexes,i, e., mold flux entrapment and velocity uniformity, are proposed. Based on these two indexes, some optimized stirring parameters under different casting conditions can be determined.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No: 50474088).
文摘The incompressible lattice Bhatnager-Gross-Krook (BGK) model of computational fluid dynamics, from which the unsteady incompressible Navier-Stokes equations can be exactly derived with the limit of small Mach number, was established in continuous casting mold. An asymmetric flow pattern in the two-dimensional central plane of continuous slab casting mold was simulated, and the flow pattern is not stationary but changes over frequently if the Reynolds number is larger than 3000 or so. The results are found to be in excellent agreement with previous experimental results.
文摘In order to develop super-board and super-thick slabs, the flow and temperatur fields were studied in slab continuous casting molds under different practical conditions, such as slab dimensions, with-drawing slab speed, design of nozzles, and superheat tempera-ture. The results showed that it is preferred to incline nozzle bores downwards and the submerged depth of the nozzles is best kept be-tween 250-300 mm. In addition, the solidified shell is thicker at the wide face than that at the narrow face, while the thin points alongthe wide face ekist both in the center and in the some area toward each respective end.
基金financially supported by National Science Foundation of China ( NO. 51274137 and NO. 50874133)
文摘Through physical modeling and numerical simulation,the flow field in a slab continuous casting mold with electromagnetic stirring is measured under different casting parameters and stirring currents. To qualitatively evaluate the flow field in the mold, two indexes,i, e., mold flux entrapment and velocity uniformity, are proposed. Based on these two indexes, some optimized stirring parameters under different casting conditions can be determined.