A low-frequency pure metal metamaterial absorber with continuously tunable stiffness

To address the incompatibility between high environmental adaptability and deep subwavelength characteristics in conventional local resonance metamaterials,and overcome the deficiencies in the stability of existing active control techniques for band gaps,this paper proposes a design method of pure metal vibration damping metamaterial with continuously tunable stiffness for wideband elastic wave absorption.We design a dual-helix narrow-slit pure metal metamaterial unit,which possesses the triple advantage of high spatial compactness,low stiffness characteristics,and high structural stability,enabling the opening of elastic flexural band gaps in the low-frequency range.Similar to the principle of a sliding rheostat,the introduction of continuously sliding plug-ins into the helical slits enables the continuous variation of the stiffness of the metamaterial unit,achieving a continuously tunable band gap effect.This successfully extends the effective band gap by more than ten times.The experimental results indicate that this metamaterial unit can be used as an additional vibration absorber to absorb the low-frequency vibration energy effectively.Furthermore,it advances the metamaterial absorbers from a purely passive narrowband design to a wideband tunable one.The pure metal double-helix metamaterials retain the subwavelength properties of metamaterials and are suitable for deployment in harsh environments.Simultaneously,by adjusting its stiffness,it substantially broadens the effective band gap range,presenting promising potential applications in various mechanical equipment operating under adverse conditions.

2-switched Er^(3+)/Dy^(3+)codoped ZrF_(4)fiber laser:continuously tunable pulse generation from 3.06 to 3.62μm

In this Letter,we report on widely tunable pulse generation from a red-diode-clad-pumped mid-infrared[mid-IR)Er^(3+)/Dy^(3+)codoped ZrF_(4)fiber laser,for the first time,to the best of our knowledge.Using a Fe^(2+):ZnSe crystal,continuously tunable Qswitched pulses across the range of 3.06–3.62μm have been attained,which not only represents the widest range[in wavelength domain)from a pulsed rare-earth-doped fiber laser at any wavelength,but also almost entirely covers the strong absorption band of C-H bonds in the mid-IR,providing a potential way for gas detection and polymer processing.In addition,the commercial InAs quantum-well-based saturable absorbers[SAs)have been employed instead,and the obtained longest Q-switching wavelength of 3.39μm is slightly shorter than 3.444μm determined by its nominal direct bandgap of 0.36 eV.

A continuously and widely tunable analog baseband chain with digital-assisted calibration for multi-standard DBS applications

This paper presents a continuously and widely tunable analog baseband chain with a digital-assisted calibration scheme implemented on a 0.13μm CMOS technology.The analog baseband is compliant with several digital broadcasting system（DBS） standards,including DVB-S,DVB-S2,and ABS-S.The cut-off frequency of the baseband circuit can be changed continuously from 4.5 to 32 MHz.The gain adjustment range is from 6 to 55.5 dB with 0.5 dB step.The calibration includes automatic frequency tuning（AFT） and automatic DC offset calibration （DCOC） to achieve less than 6%cut-off frequency deviation and 3 mV residual output offset.The out-of-band IIP2 and IIP3 of the overall chain are 45 dBm and 18 dBm respectively,while the input referred noise（IRN） is 17.4 nV/√Hz.All circuit blocks are operated at 2.8 V from LDO and consume current of 20.4 mA in the receiving mode.

Repetition rate continuously tunable 10-GHz picosecond mode-locked fiber ring laser

A couple of simple-structure phase modulators were used in active mode-locked fiber laser to implement repetition rate continuous tuning. The laser produces pulse as short as 5.7 ps whose repetition rate tuning can cover the spacing of the adjoining order mode-locking frequencies.

A continuously tunable microwave photonic notch filter with complex coefficient based on phase modulation

A continuously tunable microwave photonic notch filter with complex coefficient based on phase modulation is proposed and demonstrated. The complex coefficient is generated using a Fourier-domain optical processor(FD-OP) to control the amplitude and phase of the optical carrier and radio-frequency(RF) phase modulation sidebands. By controlling the FD-OP,the frequency response of the filter can be tuned in the full free spectral range(FSR) without changing the shape and the FSR of the frequency response. The results show that the center frequency of the notch filter can be continuously tuned from 17.582 GHz to 29.311 GHz with FSR of 11.729 GHz. The shape of the frequency response keeps unchanged when the phase is tuned.

Generation of ultra-wide and flat optical frequency comb based on electro-absorption modulator and frequency modulator

An ultra-wide and flat optical frequency comb(OFC) generation scheme using multiple continuous wave(CW) light sources based on electro-absorption modulator(EAM) and frequency modulator(FM) is proposed. In the scheme, each CW light source is broadened and modulated by the first EAM and FM, respectively. The second EAM is introduced to flatten the ultra-wide OFC lines. By setting the wavelength spacing of light sources equal to the bandwidth of sub-OFC, an ultra-wide OFC can be obtained. Principle analysis and simulation for the scheme are performed. The results show that in the case of a single light source, a tunable and flat OFC is obtained. With the increase of light sources, the bandwidth of the generated ultra-wide OFC expands rapidly. In the case of 28 light sources, a 22 GHz ultra-wide OFC with bandwidth of 16.52 THz can be generated.

Microwave photonic notch filter with complex coefficient based on four wave mixing

A microwave photonic notch filter with a complex coefficient is proposed and demonstrated based on four wave mixing(FWM). FWM effect of two single-frequency laser beams occurs in a highly nonlinear fiber(HNLF), and multi-wavelength optical signals are generated and used to generate the multi-tap of microwave photonic filter(MPF). The complex coefficient is generated by using a Fourier-domain optical processor(FD-OP) to control the amplitude and phase of the optical carrier and phase modulation sidebands. The results show that this filter can be changed from bandpass filter to notch filter by controlling the FD-OP. The center frequency of the notch filter can be continuously tuned from 5.853 GHz to 29.311 GHz with free spectral range(FSR) of 11.729 GHz. The shape of the frequency response keeps unchanged when the phase is tuned.