Experimental investigation of a high aspect ratio,low speed contra-rotating fan stage with complex inflow distortion

This paper focuses on the response of a high aspect ratio,low speed contra-rotating fan with complex inflow distortion.The total pressure at the inlet is artificially distorted by means of two different sets of screens with different porosities to generate a hub-strong complex distortion and a tip-strong complex distortion.Detailed flow analyses were conducted for the design speed of rotor-1 in combination with off design speeds of rotor-2 both for the design and the peak pressure mass flow rates.In order to understand the extent of inlet distortion,the distortion sector was rotated circumferentially at intervals of 151 to cover the entire annulus.Detailed measurements of total pressure,static pressure,velocity components and flow angles were carried out at the inlet of the first rotor,between the two rotors and at the exit of the second rotor using three seven hole probes.The study reveals a few interesting aspects on the effect of complex inflow distortion on the flow behavior of a contra-rotating stage.The presence of a low porosity screen reduces the magnitude of axial velocity and generates higher spread of distortion near the localized region of placement of the screen.The hub-strong complex distortion has a greater effect of presence of this low porosity screen in both circumferential and radial directions.This leads to higher stagnation pressure variation at the inlet.On the other hand,for the tip-strong complex distortion case,the extent of distortion is observed to be higher in the circumferential direction towards the casing rather than radial.The localized improvement in the flow(in tip-strong inflow distortion)near the tip region improves the performance both in terms of pressure rise and efficiency of stage compared to hub–strong complex distortion.

Unsteady Flow Condition between Front and Rear Rotor of Contra-Rotating Small Sized Axial Fan

Contra-rotating small-sized axial fans are used as cooling fans for electric equipment. In the case of the contra-rotating rotors, the blade row distance between front and rear rotors is a key parameter for the performance and stable operation. The wake and potential interference occur between the front and rear rotors and leakage flow from the front rotor tip influences on the flow condition of the rear rotor near the shroud when the blade row distance is small. Therefore, it is important to clarify the flow condition between front and rear rotors. The fan static pressure curves were obtained by the experimental apparatus and the numerical analysis was also conducted to investigate the internal flow between front and rear rotors. The leakage flow from the front rotor tip reaches the leading edge of the rear rotor when the blade row distance is small as L = 10 mm and the pressure fluctuations at the leading edge of the rear rotor tip becomes larger than those at other radial positions. In the present paper, the vorticity contour between front and rear rotors is shown and pressure fluctuations related to the leakage flow from the front rotor is investigated using the numerical analysis result. Then, suitable blade row distance for the contra-rotating small sized axial fan is discussed based on the internal flow condition.

Debris Fan Produced by Failure of Canyon-Blocking Pyroclastic Flows

Ash-rich pyroclastic flows from the cataclysmic eruption of Mount Mazama (~7700 yr. B. P.), Cascade volcanic arc, Oregon, entered and blocked the narrow, bedrock-lined canyon of the Williamson River approximately 35 to 44 km from the source volcano. The blockage impounded a body of water which then released producing four stratigraphic units in the downstream debris fan. The four stratigraphic units are a boulder core comprised of locally sourced bedrock boulders and three sand-rich units including a fine-grained sand unit, a sandy pumice gravel (±basalt/hydrovolcanic tuff) unit, and a pumice pebble-bearing, crystal-rich sand unit. Hand-drilled auger holes up to ~1.6 m deep were used to obtain samples of the sand-rich units. Units were delimited using surface and down-hole observations, composition and texture, estimated density, statistical parameters of grain size, and vertical and lateral distribution of properties. Overtopping followed by rapid incision into the ash-rich pyroclastic flows progressively cleared the canyon, but a bedrock knickpoint near the head of the canyon limited the volume of debris available for transport to about 0.04 km3 to 0.08 km3. Co-deposition of bedrock boulders and lithic-rich sand was followed by rapid deposition with minimal reworking of remobilized pyroclastics. Continued draining of the impounded lake sent hyperconcentrated flows onto the debris fan depositing pumice-rich gravels that graded upward to crystal-rich sands.

Performance and Internal Flow of Contra-Rotating Small-Sized Cooling Fan

High pressure and large flow rate small-sized cooling fans are used for servers in data centers and there is a strong demand to increase its performance because of increase of quantity of heat from servers. Contra-rotating rotors have been adopted for some of high pressure and large flow rate cooling fans to meet the demand. The performance curve of the contra-rotating small-sized cooling fan with 40 mm square casing was investigated by an experimental apparatus and its internal flow condition was clarified by the numerical analysis. The fan static pressure of the front rotor was extremely low and it increased significantly at the rear rotor. The uniform flow was achieved at the inlet of the rear rotor because of the special shape of the casing between the front and rear rotors. On the other hand, the tip leakage flow was large enough to influence on the main flow of the test cooling fan by the design specification of high pressure with compact rotor diameter.

Influence of Tip Clearance on Performance of a Contra-Rotating Fan

Influences of tip clearance on the tip flow and associated loss mechanism in a contra-rotating axial flow fan hasbeen studied in the paper, based on three dimensional numerical results. The results with different tip clearanceare compared in terms of stage efficiency, relative total pressure loss coefficient, flow angle. It is found that theefficiency of the contra-rotating fan changes almost linearly with increment of the tip clearance, however, efficiencyof the rear rotor is observed to decrease more dramatically than that of the forward rotor given same tipclearance variation. The analysis on the flow structure indicates that the tip region flow field is qualitatively similarin both rotors. However, with the same clearance value, the leakage flow in the rear rotor is effected by a tipleakage vortex of greater intensity caused by relative loading levels and the inter rotor interaction.

Internal Flow Condition between Front and Rear Rotor of Contra-Rotating Small-Sized Axial Fan at Low Flow Rate

Contra-rotating small-sized fans are used as cooling fans for electric equipment. The internal flow condition between the front and rear rotors of the contra-rotating small-sized fan is not known well especially at the low flow rate. Furthermore, the blade row distance between the front and rear rotors is an important parameter for the contra-rotating small-sized fan and its influence on the internal flow condition is not clarified at the low flow rate. Therefore, the internal flow condition of the contra-rotating small-sized fan at the low flow rate is investigated by the numerical analysis in this research. The numerical analysis results are validated by comparing the fan static pressure curves of the numerical results to the experimental results. The internal flow condition at the low flow rate is clarified using the numerical models of the different blade row distance L = 10 mm and 30 mm. In the present paper, pressure fluctuations phase locked each front and rear rotor’s rotation are shown and the influences of the wake and the potential interference are discussed by the unsteady numerical analysis results at the low flow rate.

广义的Ky Fan定理

矩阵行列式是矩阵分析学中一个很重要的分支,利用矩阵外代数,可以把行列式的计算转换成矩阵的迹算子。首先,从典型的Ky Fan定理出发,给出了该定理的一个等价形式,并且利用Brunn-Minkowski不等式给出了定理的证明。其次,利用凸函数的性质,得到了Ky Fan定理的一个更一般的表示形式。

Effects of desert plant communities on soil enzyme activities and soil organic carbon in the proluvial fan in the eastern foothills of the Helan Mountain in Ningxia,China

It is of great significance to study the effects of desert plants on soil enzyme activities and soil organic carbon(SOC)for maintaining the stability of the desert ecosystem.In this study,we studied the responses of soil enzyme activities and SOC fractions(particulate organic carbon(POC)and mineral-associated organic carbon(MAOC))to five typical desert plant communities(Convolvulus tragacanthoides,Ephedra rhytidosperma,Stipa breviflora,Stipa tianschanica var.gobica,and Salsola laricifolia communities)in the proluvial fan in the eastern foothills of the Helan Mountain in Ningxia Hui Autonomous Region,China.We recorded the plant community information mainly including the plant coverage and herb and shrub species,and obtained the aboveground biomass and plant species diversity through sample surveys in late July 2023.Soil samples were also collected at depths of 0–10 cm(topsoil)and 10–20 cm(subsoil)to determine the soil physicochemical properties and enzyme activities.The results showed that the plant coverage and aboveground biomass of S.laricifolia community were significantly higher than those of C.tragacanthoides,S.breviflora,and S.tianschanica var.gobica communities(P<0.05).Soil enzyme activities varied among different plant communities.In the topsoil,the enzyme activities of alkaline phosphatase(ALP)andβ-1,4-glucosidas(βG)were significantly higher in E.rhytidosperma and S.tianschanica var.gobica communities than in other plant communities(P<0.05).The topsoil had higher POC and MAOC contents than the subsoil.Specifically,the content of POC in the topsoil was 18.17%–42.73%higher than that in the subsoil.The structural equation model(SEM)indicated that plant species diversity,soil pH,and soil water content(SWC)were the main factors influencing POC and MAOC.The soil pH inhibited the formation of POC and promoted the formation of MAOC.Conversely,SWC stimulated POC production and hindered MAOC formation.Our study aimed to gain insight into the effects of desert plant communities on soil enzyme activities and SOC fractions,as well as the drivers of SOC fractions in the proluvial fan in the eastern foothills of the Helan Mountain and other desert ecosystems.

Temperature-Based Fan Speed Optimization Strategy

As energy efficiency and indoor comfort increasingly become key standards in modern residential and office environments,research on intelligent fan speed control systems has become particularly important.This study aims to develop a temperature-feedback-based fan speed optimization strategy to achieve higher energy efficiency and user comfort.Firstly,by analyzing existing fan speed control technologies,their main limitations are identified,such as the inability to achieve smooth speed transitions.To address this issue,a BP-PID speed control algorithm is designed,which dynamically adjusts fan speed based on indoor temperature changes.Experimental validation demonstrates that the designed system can achieve smooth speed transitions compared to traditional fan systems while maintaining stable indoor temperatures.Furthermore,the real-time responsiveness of the system is crucial for enhancing user comfort.Our research not only demonstrates the feasibility of temperature-based fan speed optimization strategies in both theory and practice but also provides valuable insights for energy management in future smart home environments.Ultimately,this research outcome will facilitate the development of smart home systems and have a positive impact on environmental sustainability.

参数向量Ky Fan不等式与对偶问题解映射Lipschitz连续性最优条件

在赋范线性空间中研究参数向量Ky Fan不等式与对偶问题解映射的Lipschitz连续性。提出了参数向量Ky Fan不等式与对偶问题及其有效解的概念,引入了向量函数伪单调性和强拟凸(凹)性,借助分析方法获得了参数向量Ky Fan不等式与对偶问题解映射的Lipschitz连续性最优条件,并举例加以说明。

Effect of Time Step Size and Turbulence Model on the Open Water Hydrodynamic Performance Prediction of Contra-Rotating Propellers

A growing interest has been devoted to the contra-rotating propellers （CRPs） due to their high propulsive efficiency, torque balance, low fuel consumption, low cavitations, low noise performance and low hull vibration. Compared with the single-screw system, it is more difficult for the open water performance prediction because forward and aft propellers interact with each other and generate a more complicated flow field around the CRPs system. The current work focuses on the open water performance prediction of contra-rotating propellers by RANS and sliding mesh method considering the effect of computational time step size and turbulence model. The validation study has been performed on two sets of contra-rotating propellers developed by David W Taylor Naval Ship R ＆ D center. Compared with the experimental data, it shows that RANS with sliding mesh method and SST k-ω turbulence model has a good precision in the open water performance prediction of contra-rotating propellers, and small time step size can improve the level of accuracy for CRPs with the same blade number of forward and aft propellers, while a relatively large time step size is a better choice for CRPs with different blade numbers.

Study on Contra-Rotating Small-Sized Axial Flow Hydro Turbine

It is thought that small hydropower generation is alternative energy, and the energy potential of small hydropower is large. The efficiency of small hydro turbines is lower than that of large one, and these small hydro turbine’s common problems are out of operation by foreign materials. Then, there are demands for small hydro turbines to keep high per- formance and wide flow passage. Therefore, we adopted contra-rotating rotors which can be expected to achieve high performance and low-solidity rotors with wide flow passage in order to accomplish high performance and stable opera- tion. Final goal on this study is development of an electric appliance type small hydro turbine which has high portability and makes an effective use of the unused small hydro power energy source. In the present paper, the performance and the internal flow conditions in detail of contra-rotating small-sized axial flow hydro turbine are shown as a first step of the research with the numerical flow analysis. Then, a capability adopting contra-rotating rotors to an electric appliance type small hydro turbine was discussed. Furthermore, the high performance design for it was considered by the numeri- cal analysis results.

Modeling and Numerical Simulation of Wings Effect on Turbulent Flow between two contra-rotating cylinders

Many industries in the world take part in the pollution of the environment. This pollution often comes from the reactions of combustion. To optimize these reactions and to minimize pollution, turbulence is a funda- mental tool. Several factors are at the origin of turbulence in the complex flows, among these factors, we can quote the effect of wings in the rotating flows. The interest of this work is to model and to simulate numeri- cally the effect of wings on the level of turbulence in the flow between two contra-rotating cylinders. We have fixed on these two cylinders eight wings uniformly distributed and we have varied the height of the wings to have six values from 2 mm to 20 mm by maintaining the same Reynolds number of rotation. The numerical tool is based on a statistical model in a point using the closing of the second order of the transport equations of the Reynolds stresses (Reynolds Stress Model: RSM). We have modelled wings effect on the flow by a source term added to the equation tangential speed. The results of the numerical simulation showed that all the average and fluctuating variables are affected the value of the kinetic energy of turbulence as those of Reynolds stresses increase with the height of the wings.

Zhu Fan Zhi and the Maritime Road of Aromatic Medicine in the Song Dynasty

Zhao Rukuo's Zhu Fan Zhi in the Southern Song dynasty was the first book in the history of China to systematically describe the “Maritime Silk Road”, recording the geography, products, customs, trade, etc. of more than 50 foreign countries and regions. The book included a large amount of medical literature, introducing medical customs and the production of drugs in various places, as well as the efficacy of some medicine. These materials are of unique value for understanding the medicine trade in the Song dynasty, and even the medical culture along the “Maritime Road of Aromatic Medicine”.

Characteristics of an Axial-flux Permanent Magnet Synchronous Machine with Contra-rotating Rotors under Unbalanced Load Condition from 3-D Finite Element Analysis

During recent years,the axial-flus PMSM with contra-rotating rotors has become a hot topic in academic research due to its high efficiency and simple structure.However,its back-EMF may be distorted under the condition of different angular positions.This paper investigates characteristics of the novel motor used for contra-propeller driving.Considering the torque ripple and current oscillation under unbalanced load condition,this paper analyzes the distorted back-EMF of the machine when its two rotors get different angular positions during rotating.The analysis results are validated by transient-magnetic 3-D FEA method,which the 3-D FEA software is used to model this motor and transient simulations are carried out to obtain its magnetic characteristic and main performances.A main focus is put on the back-EMF characteristic with different angular positions between the two rotors.Furthermore,the characteristic of torque production under unbalanced load is investigated.Finally,a prototype motor is fabricated to validate the analyses of this paper.

Numerical Study on the Duct Noise Control of Single-Stage Axial Flow Fan with Wave Leading Edge Stator Blade Configurations

This study focuses on a single-stage axial flow fan, investigating the effect of three kinds of wave leading edge stator blades on its noise reduction. The DDES method and the duct acoustic analogy theory based on the penetrable data surface were used for noise prediction. The results showed that the three kinds of wave leading edge blades were effective in reducing the rotor-stator interaction tonal noise and also have a certain inhibitory effect on broadband noise. The A10W15 stator blade can effectively reduce broadband noise in the frequency range of 2200 - 4200 Hz. When the amplitude is increased to 20, the noise reduction effect is further enhanced. However, when the amplitude is increased to 30, the broadband noise reduction effect is no longer significant. Further research shows that the wave leading edge stator blades can significantly change the pressure fluctuation distribution on the leading edge and suction surface, which control the modal energy distribution. Finally, this paper analyzed multiple factors affecting the broadband noise reduction, such as the noise source cut-off and cut-on effect and correlation. The purpose of this paper is to explore the laws of the influence of wave leading edge blades on the duct noise of real fan, and to reveal its noise control mechanism. .

Late Eocene–early Miocene provenance evolution of the Crocker Fan in the southern South China Sea

There are many large-scale Cenozoic sedimentary basins with plentiful river deltas,deep-water fans and carbonate platforms in the southern South China Sea.The Crocker Fan was deposited as a typical submarine fan during the late Eocene–early Miocene,and stretches extensively across the entire Sarawak–Sabah of the northern Borneo area.However,systematic analyses are still lacking regarding its sediment composition and potential source suppliers.No consensus has been reached yet on the provenance evolution and sedimentary infilling processes,which seriously impeded the oil-and-gas exploration undertakings.By combining with sedimentaryfacies identification,heavy mineral assemblages,elemental geochemistry and detrital zircon U-Pb dating,this paper aims to generalize an integrated analysis on the potential provenance terranes and restore source-to-sink pathways of the Crocker Fan.In general,the Crocker Fan was initially formed over the Cretaceous–lower/middle Eocene Rajang Group by an angular Rajang unconformity.The continual southward subduction of the protoSouth China Sea resulted in magmatic activities and subsequent regional deformation and thrusting along the Lupar Line in the northern Borneo.The lowermost Crocker sequence is featured by a thick conglomerate layer sourced from in-situ or adjacent paleo-uplifts.From the late Eocene to the early Miocene,the Crocker Fan was constantly delivered with voluminous detritus from the Malay Peninsula of the western Sundaland.The Zengmu Basin was widely deposited with delta plain and neritic facies sediments,while the Brunei-Sabah Basin,to the farther east,was ubiquitously characterized by turbiditic sequences.The Crocker Fan successions are overall thick layers of modest-grained sandstones,which formed high-quality reservoirs in the southern South China Sea region.

Effect of Pre-Swirling Flow on Performance and Flow Fields in Semi-Opened Axial Fan

In this study, we tried to improve the performance by giving a pre-swirling flow to the radial inflow that occurred in the semi-opened axial fan. In addition, the flow fields of rotor outlet were clarified experimentally, and the effect of pre-swirling flow was considered. The experiment was carried out using a performance test wind tunnel with a square cross section of 880 mm. Three types of casings were prepared, in which the blade tip protruded 0%, 20%, and 40% of the meridional chord length. They were called R25, R15, and R05, respectively, in the casing bellmouth model code. Guide blades for generating a pre-swirling flow were installed on the vertical wall surface of the casing. In addition, a vertical wall was installed 60% upstream of the meridional chord length as an obstacle to prevent axial inflow. The velocity fields of the rotor outlet were measured using a hot-wire anemometer. From the results, the pre-swirling flow did not significantly affect the fan performance. When there was no obstacles wall upstream, there was a partial increase in efficiency, but the difference was not so large. When there was an obstacle wall upstream, the efficiency increased overall in the case of R15, but in the case of R05, the efficiency increased only in the low flow rate region, and conversely decreased in the high flow rate region. By observing the blade outlet flow fields when the performance was improved, it was confirmed that the influence of the tip leakage vortex was weakened.

Flood risk on arid alluvial fans:a case study in the Joghatay Mountains,Northeast Iran

Among the common hazards related to alluvial fans,flooding is one of the most important.Nonetheless,in populated alluvial fans,not only the natural processes are effective in floods,but the artificial structures and modifications can change the behavior of flooding and its potential risks.This study aims to indicate the flood-prone landforms in a set of populated alluvial fans in an arid region and investigate the role of anthropogenic activities in controlling/exacerbating flooding in alluvial fans.To achieve this goal,15 Ground Range Detected in High resolution(GRDH)SAR Sentinel-1 images,covering a total of 24 alluvial fans,were acquired.Pre-processing and post-processing steps were applied to all images to identify flood-prone sections of the studied alluvial fans.The results showed that feeder channels,spreading sites,and wide interfluves are the most flood-prone landforms of alluvial fans.In terms of anthropogenic modifications to mitigate flooding,a rampart system is distributed in the study area.Ramparts are levee like structures formed from the fan material.They aim to mitigate flood hazard on residential areas,infrastructures,and agricultural lands of the study area.Results show that the rampart system can reduce the danger of floods,but it cannot be considered a long-term solution.Therefore,a comprehensive flood protection system distributed throughout the whole alluvial fan system is needed.Results also reveal that in regions where flood monitoring is challenging,SAR images can be used as a freely available data set to monitor and identify flooding hotspots.