Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and ...Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and valence state were characterized by SEM, XRD, ICP and XPS, respectively. The experimental results show the active component Cu of the catalysts via in situ synthesis could significantly improve the selective catalytic reduction （SCR） activities of NOx and the optimal Cu content is in the range of 0.30%-0.40%（mass fraction）. No N 2 O is detected by gas chromatograph （GC） during the evaluation process, which implies that NOx is almost entirely converted to N2 over Cu-SAPO-34/cordierite catalyst. The conversion rate of NOx to N2 by NH3 over catalyst could almost be up to 100%in the temperature range of 300-670 ℃with a space velocity of 12000 h-1 and it is still more than 60% at 300-620 ℃ under 36000 h-1. The catalysts also show the good hydrothermal and chemical stability at the atmosphere with H 2 O.展开更多
The working principle of a kind of compositive emission control system is inquired into, which includes exhaust heater, secondary air supplement, exhaust gas recirculation （EGR）, thermal reactor and catalytic conver...The working principle of a kind of compositive emission control system is inquired into, which includes exhaust heater, secondary air supplement, exhaust gas recirculation （EGR）, thermal reactor and catalytic converter, etc. The purification effect of CO, HC and NOx emission of the gasoline spark ignite （S.I.） engine is studied. The entire vehicle driving cycle tests based on the national emission standard and a series of the gasoline engine-testing bench tests including full load characteristic experiment, load characteristic experiment and idle speed experiment are done. The results show that the system has a very good emission control effect to CO, HC and NOx of gasoline engine. The construction of the system is very simple and can be mounted on the exhaust pipe conveniently without any alteration of the vehicle-use gasoline engine.展开更多
A turbocharged diesel engine model was built with the GT-Power software,and experimentally verified.Then two different control variables for the control of the variable geometry turbocharger（VGT）were described,and t...A turbocharged diesel engine model was built with the GT-Power software,and experimentally verified.Then two different control variables for the control of the variable geometry turbocharger（VGT）were described,and their distinct effects on engine performance,i.e.NOxand soot emissions and fuel consumption,were simulated and compared on the basis of this model.The results showed that NOxemissions decreased obviously with the increase of exhaust gas recirculation（EGR）rate at constant boost pressure condition,but soot emissions and fuel consumption considerably increased.It was a good way to reduce NOxemissions without increasing fuel consumption and soot emissions when VGT was controlled to maintain the excess oxygen ratio unchanged as EGR rate increases.展开更多
Diesel vehicles have caused serious environmental problems in China.Hence,the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in...Diesel vehicles have caused serious environmental problems in China.Hence,the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in the latest China VI standard.To fulfill this stringent legislation,two major technical routes,including the exhaust gas recirculation(EGR)and high-efficiency selective catalytic reduction(SCR)routes,have been developed for diesel engines.Moreover,complicated aftertreatment technologies have also been developed,including use of a diesel oxidation catalyst(DOC)for controlling carbon monoxide(CO)and hydrocarbon(HC)emissions,diesel particulate filter(DPF)for particle mass(PM)emission control,SCR for the control of NOx emission,and an ammonia slip catalyst(ASC)for the control of unreacted NH3.Due to the stringent requirements of the China VI standard,the aftertreatment system needs to be more deeply integrated with the engine system.In the future,aftertreatment technologies will need further upgrades to fulfill the requirements of the near-zero emission target for diesel vehicles.展开更多
Ⅰ. Briefing domestic vehicle diesel engines Before the 1970s, domestic vehicle diesel engines were mainly applied to heavy vehicles, while medium and light vehicles were powered chiefly with gasoline engines.
基金Project(20906067)supported by the National Natural Science Foundation of ChinaProject(2011M500543)supported by the Postdoctoral Science Foundation of ChinaProject supported by the Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi
文摘Cu-SAPO-34/cordierite catalysts were prepared via one-step hydrothermal synthesis method and their performances to remove NO x from the diesel vehicle exhaust were evaluated. The morphology, structure, Cu content and valence state were characterized by SEM, XRD, ICP and XPS, respectively. The experimental results show the active component Cu of the catalysts via in situ synthesis could significantly improve the selective catalytic reduction （SCR） activities of NOx and the optimal Cu content is in the range of 0.30%-0.40%（mass fraction）. No N 2 O is detected by gas chromatograph （GC） during the evaluation process, which implies that NOx is almost entirely converted to N2 over Cu-SAPO-34/cordierite catalyst. The conversion rate of NOx to N2 by NH3 over catalyst could almost be up to 100%in the temperature range of 300-670 ℃with a space velocity of 12000 h-1 and it is still more than 60% at 300-620 ℃ under 36000 h-1. The catalysts also show the good hydrothermal and chemical stability at the atmosphere with H 2 O.
基金This project is supported by Provincial Natural Science Foundation of Guangdong, China and Provincial Environmental Protection Science Foundation of Guangdong, China(No.320-D38000).
文摘The working principle of a kind of compositive emission control system is inquired into, which includes exhaust heater, secondary air supplement, exhaust gas recirculation （EGR）, thermal reactor and catalytic converter, etc. The purification effect of CO, HC and NOx emission of the gasoline spark ignite （S.I.） engine is studied. The entire vehicle driving cycle tests based on the national emission standard and a series of the gasoline engine-testing bench tests including full load characteristic experiment, load characteristic experiment and idle speed experiment are done. The results show that the system has a very good emission control effect to CO, HC and NOx of gasoline engine. The construction of the system is very simple and can be mounted on the exhaust pipe conveniently without any alteration of the vehicle-use gasoline engine.
基金Supported by Diesel Engine Development Program of MIIT(DEDP-1004)Natural Science Foundation of BIT(3030012211428)
文摘A turbocharged diesel engine model was built with the GT-Power software,and experimentally verified.Then two different control variables for the control of the variable geometry turbocharger（VGT）were described,and their distinct effects on engine performance,i.e.NOxand soot emissions and fuel consumption,were simulated and compared on the basis of this model.The results showed that NOxemissions decreased obviously with the increase of exhaust gas recirculation（EGR）rate at constant boost pressure condition,but soot emissions and fuel consumption considerably increased.It was a good way to reduce NOxemissions without increasing fuel consumption and soot emissions when VGT was controlled to maintain the excess oxygen ratio unchanged as EGR rate increases.
基金supported by the National Key R&D Program of China(No.2017YFC0211101)the Key Project of National Natural Science Foundation(No.21637005)+1 种基金the Cultivating Project of Strategic Priority Research Program of Chinese Academy of Sciences(No.XDPB1902)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA23010200)。
文摘Diesel vehicles have caused serious environmental problems in China.Hence,the Chinese government has launched serious actions against air pollution and imposed more stringent regulations on diesel vehicle emissions in the latest China VI standard.To fulfill this stringent legislation,two major technical routes,including the exhaust gas recirculation(EGR)and high-efficiency selective catalytic reduction(SCR)routes,have been developed for diesel engines.Moreover,complicated aftertreatment technologies have also been developed,including use of a diesel oxidation catalyst(DOC)for controlling carbon monoxide(CO)and hydrocarbon(HC)emissions,diesel particulate filter(DPF)for particle mass(PM)emission control,SCR for the control of NOx emission,and an ammonia slip catalyst(ASC)for the control of unreacted NH3.Due to the stringent requirements of the China VI standard,the aftertreatment system needs to be more deeply integrated with the engine system.In the future,aftertreatment technologies will need further upgrades to fulfill the requirements of the near-zero emission target for diesel vehicles.
文摘Ⅰ. Briefing domestic vehicle diesel engines Before the 1970s, domestic vehicle diesel engines were mainly applied to heavy vehicles, while medium and light vehicles were powered chiefly with gasoline engines.
