As the country continues to promote the development of intelligent manufacturing,all industries are carrying out enterprise automation upgrading,the Pearl River Delta Intelligent Manufacturing Conference held in March...As the country continues to promote the development of intelligent manufacturing,all industries are carrying out enterprise automation upgrading,the Pearl River Delta Intelligent Manufacturing Conference held in March 2024 provides a direction guide for each enterprise on how to integrate the intelligent manufacturing technology into each link and provide direction guidance for enterprises to create new models and new business formats.College teachers,in focusing on the teaching process,should closely match the enterprise and social needs and cultivate excellent students.As the core controller of automation control,the application of programmable controllers in teaching is particularly important.In practical classes,by setting progressive difficulty,project guidance,team collaboration,and other links,students can master the automation equipment design of programmable control in repeated practice.展开更多
Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuat...Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuators in the field.However,PLC has memory attack threats such as program injection and manipulation,which has long been a major target for attackers,and it is important to detect these attacks for ICS security.To detect PLC memory attacks,a security system is required to acquire and monitor PLC memory directly.In addition,the performance impact of the security system on the PLC makes it difficult to apply to the ICS.To address these challenges,this paper proposes a system to detect PLC memory attacks by continuously acquiring and monitoring PLC memory.The proposed system detects PLC memory attacks by acquiring the program blocks and block information directly from the same layer as the PLC and then comparing them in bytes with previous data.Experiments with Siemens S7-300 and S7-400 PLC were conducted to evaluate the PLC memory detection performance and performance impact on PLC.The experimental results demonstrate that the proposed system detects all malicious organization block(OB)injection and data block(DB)manipulation,and the increment of PLC cycle time,the impact on PLC performance,was less than 1 ms.The proposed system detects PLC memory attacks with a simpler detection method than earlier studies.Furthermore,the proposed system can be applied to ICS with a small performance impact on PLC.展开更多
This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure...This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.展开更多
In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and progr...In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and programmability of controlling software.In the aspect of design,the platform is composed of hardware controlling and software monitoring and is taking industrial computer as the core.Under the Windows environment,the platform establishes the control instruction set,develops the configuration function and visual programming function of the monitoring software and it integrates PLC controller based on Visual Basic software.In order to achieve the function of data monitoring,it has realized the serial communication between computer and PLC by using RS-485 and RS-232 serial ports line communication.The platform designs the intelligent instruction scheduling strategy by studying the encoding and decoding rules of the communication instruction set.It proposes a method for rapidly developing control programs by adopting the expert control mode,which enables clients to develop and modify programs conveniently by importing instructions in a non-coded manner.After experimental testing,the platform is proved successful achieving both the rapid development of PLC control system and the rapid modification of monitoring software.展开更多
The Ethernet and field-bus communications are used in the machine control system (MCS) of HL-2A. The control net, with a programmable logic controller (PLC) as its logic control master, an engineering control mana...The Ethernet and field-bus communications are used in the machine control system (MCS) of HL-2A. The control net, with a programmable logic controller (PLC) as its logic control master, an engineering control management station as its net server, and a timing control PC connected to a number of terminals, flexibly and freely transfers information among the nodes on it with the Ethernet transmission techniques. The PLC masters the field bus, which carries small pieces of information between PLC and the field sites reliably and quickly. The control net is connected into the data net, where Internet access and sharing of more experimental data are enabled. The communication in the MCS guarantees the digitalization, automation and centralization. Also provided are a satisfactory degree of safety, reliability, stability, expandability and flexibility for maintenance.展开更多
This paper mainly represents the realization of synchro controller based on the programmable logic devices FPGA by request of HF ground wave radar synchro controller under the instance of making the best of the virtue...This paper mainly represents the realization of synchro controller based on the programmable logic devices FPGA by request of HF ground wave radar synchro controller under the instance of making the best of the virtues of FPGA. This design introduces the data communication between PC and synchro controller by PC Bus, which can carry the synchronous signals parameters to RAM of synchro controller, then according to the theory that the result of comparing counter value with signals parameters is the needed wave, we produce all waves HF ground wave radar needs, moreover all waves are produced time-sharing in order to save resources.展开更多
Bangladesh locates in lower reach of Ganges-Brahmaputra-Meghma, Bengal delta. Bangladesh is a land of rivers and heavy monsoon rains. Every year during monsoon period (May-September)the country floods of verying magni...Bangladesh locates in lower reach of Ganges-Brahmaputra-Meghma, Bengal delta. Bangladesh is a land of rivers and heavy monsoon rains. Every year during monsoon period (May-September)the country floods of verying magnitude, it causes damages to crops, properties, infrastructures, etc. and ultimately affects the economy development of the country. Banglandesh flood has some features given below: 1. The excessive rainfall over the vast catchment area of the river is the main cause of flood in Bangladesh, but 90% of the flood carried by rivers come from outside the country, i.e. regional countries, India, Nepal,展开更多
An innovation is conducted on a K190πK rail auto welding machine because of its poor stability in quality of welding joints. A new control system based on a programmable controller is designed to replace the old o...An innovation is conducted on a K190πK rail auto welding machine because of its poor stability in quality of welding joints. A new control system based on a programmable controller is designed to replace the old one. The new control system is of higher accuracy in controlling sequence and good ability in anti disturbance, and is convenient to operate. The comparison tests are carried out. The experimental results show that the quality of welded joints is greatly increased by the improved welding mechine.展开更多
The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, ...The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, material exchange station, multi-storeyed warehouse system, NC and CNC machines and host computer etc. The paper describes the transport control system and its design, and briefly describes the communication among devices and warehouse access principles.展开更多
Cyberattacks on the Industrial Control System(ICS)have recently been increasing,made more intelligent by advancing technologies.As such,cybersecurity for such systems is attracting attention.As a core element of contr...Cyberattacks on the Industrial Control System(ICS)have recently been increasing,made more intelligent by advancing technologies.As such,cybersecurity for such systems is attracting attention.As a core element of control devices,the Programmable Logic Controller(PLC)in an ICS carries out on-site control over the ICS.A cyberattack on the PLC will cause damages on the overall ICS,with Stuxnet and Duqu as the most representative cases.Thus,cybersecurity for PLCs is considered essential,and many researchers carry out a variety of analyses on the vulnerabilities of PLCs as part of preemptive efforts against attacks.In this study,a vulnerability analysis was conducted on the XGB PLC.Security vulnerabilities were identified by analyzing the network protocols and memory structure of PLCs and were utilized to launch replay attack,memory modulation attack,and FTP/Web service account theft for the verification of the results.Based on the results,the attacks were proven to be able to cause the PLC to malfunction and disable it,and the identified vulnerabilities were defined.展开更多
According to the demands for rapid and accurate burdening system, an automation forage burdening system was designed using a programmable logic controller (PLC) as the main controller. The communication between PLC ...According to the demands for rapid and accurate burdening system, an automation forage burdening system was designed using a programmable logic controller (PLC) as the main controller. The communication between PLC and force control was achieved by485 bus. This system have many functions such as recipe setup, burdening control, feed mixture, report printing, and remote alarm. The remote surveillance and control of burdening system were realized. The practice shows that the system had high precision and short cycle, and great control effect was obtained.展开更多
In order to help the small-scale farmer, an automatic irrigation control system was proposed. This system will provide an irrigation system that will ease the burden of the citizen to take care of the plant. This syst...In order to help the small-scale farmer, an automatic irrigation control system was proposed. This system will provide an irrigation system that will ease the burden of the citizen to take care of the plant. This system will run automatically by referring to the time set by the user. As the name itself is a water control system, this system will only start irrigating when the time set triggered the water control level for the plant to grow healthily. It will automatically stop when the timer is off (1 hour). The brain of the system is the PLC (Programmable Logic Controller). This is the place where all the activities are done. The irrigation will be provided by a pump that is also connected to the microcontroller. The pump will be activated until the timer has reached its time set. This system will continue running until the user presses the OFF button.展开更多
A new type of plasma arc equipment with four functions including plasma arc welding, cutting, spraying and a surfacing process was designed and manufactured. To obtain good processing stability and multifunction integ...A new type of plasma arc equipment with four functions including plasma arc welding, cutting, spraying and a surfacing process was designed and manufactured. To obtain good processing stability and multifunction integration, a silicon controlled rectifier (SCR), and the programmable controller (PC) were introduced. The operation of this new machine shows that it has the advantage of simple circuit design, flexible control pattern, low fault rate and easy maintenance.展开更多
In order to realize the processing and retrieval of magnetic thin sheet materials in industrial production, this paper proposed a kind of transfer device for magnetic thin sheet raw material, which uses rodless cylind...In order to realize the processing and retrieval of magnetic thin sheet materials in industrial production, this paper proposed a kind of transfer device for magnetic thin sheet raw material, which uses rodless cylinders as the main motive device and the programmable logic controller (PLC) to achieve the required functions, and applies the finite element analysis method to analyze its main components in the end of the design.展开更多
Poverty magnifies limitations posed by traditional biases and environmental risks.Any approach towards disease control needs to recognise that socially embedded vulnerabilities can be as powerful as externally imposed...Poverty magnifies limitations posed by traditional biases and environmental risks.Any approach towards disease control needs to recognise that socially embedded vulnerabilities can be as powerful as externally imposed infections.Asia Pacific has a specific panorama of infectious diseases,which,in common with other endemic areas,have a tendency to emerge or re-emerge if not carefully monitored.Sustained control aiming at elimination requires strong emphasis on surveillance and response.Well-designed informatics platforms can improve support systems and strengthen control activities,as they rapidly locate high-risk areas and provide detailed,up-to-date information on the performance of ongoing control programmes.展开更多
This article introduces a computer numerical control (CNC)-based open hardware architecture system to realize the special functions of automated tape-laying (ATL) in a numerical control system. It associates a pro...This article introduces a computer numerical control (CNC)-based open hardware architecture system to realize the special functions of automated tape-laying (ATL) in a numerical control system. It associates a programmable multi-axis controller (PMAC) as the motion control unit with programmable numerical controllers (PCL-725, PCL-730) for on-off control. To bring about synchronized movements of the main 5-axis tape-laying head system and the 3-axis ultrasonic tape-cutting sub-system, the tracking-control method associated with time-based mode attributed to PMAC is applied in different cases. In addition, with the goal of realizing real-time tasks in the software system such as synchronizing motion control and on-off control, the real-time Win 2000 system is adopted. As a device driver for PMAC and PCL, a user graphical interface and a numerical control program interpretation module are also designed. This system is helpful to solve complicated problems in designing numerical controls for ATL such as ensuring high requirements for precise machine control and synchronization of motion control and on-off control.展开更多
Programmable logic controllers(PLCs)play a critical role in many industrial control systems,yet face increasingly serious cyber threats.In this paper,we propose a novel PLC-compatible software-based defense mechanism,...Programmable logic controllers(PLCs)play a critical role in many industrial control systems,yet face increasingly serious cyber threats.In this paper,we propose a novel PLC-compatible software-based defense mechanism,called Heterogeneous Redundant Proactive Defense Framework(HRPDF).We propose a heterogeneous PLC architecture in HRPDF,including multiple heterogeneous,equivalent,and synchronous runtimes,which can thwart multiple types of attacks against PLC without the need of external devices.To ensure the availability of PLC,we also design an inter-process communication algorithm that minimizes the overhead of HRPDF.We implement a prototype system of HRPDF and test it in a real-world PLC and an OpenPLC-based device,respectively.The results show that HRPDF can defend against multiple types of attacks with 10.22%additional CPU and 5.56%additional memory overhead,and about 0.6 ms additional time overhead.展开更多
Background:Implementation of control programmes for Strongyloides stercoralis infection is among the targets of the World Health Organization Roadmap to 2030.Aim ofthis work was to evaluate the possible impact in term...Background:Implementation of control programmes for Strongyloides stercoralis infection is among the targets of the World Health Organization Roadmap to 2030.Aim ofthis work was to evaluate the possible impact in terms of economic resources and health status of two different strategies of preventive chemotherapy(PC)compared to the current situation(strategy A,no PC):administration of ivermectin to school-age children(SAC)and adults(strategy B)versus ivermectin to SAC only(strategy C).Methods:The study was conducted at the IRCCS Sacro Cuore Don Calabria hospital,Negrar di Valpolicella,Verona,Italy,at the University of Florence,Italy,and at the WHO,Geneva,Switzerland,from May 2020 to April 2021.Data for the model were extracted from literature.A mathematical model was developed in Microsoft Excel to assess the impact of strategies B and C in a standard population of 1 million subjects living in a strongyloidiasis endemic area.In a case base seenario,15%prevalence of strongyloidiasis was considered;the 3 strategies were then evaluated at different thresholds of prevalenee,ranging from 5 to 20%.The results were reported as number of infected subjects,deaths,costs,and Incremental-Effectiveness Ratio(ICER).A 1-year and a 10-year horizons were considered.Results:In the case base seenario,cases of infections would reduce dramatically in the first year of implementation of PC with both strategy B and C:from 172500 cases to 77040 following strategy B and 146700 following strategy C.The additional cost per recovered person was United States Dollar(USD)2.83 and USD 1.13 in strategy B and C,respectively,compared to no treatment in the first year.For both strategies,there was a downtrend in costs per recovered person with increasing prevalenee.The number of adverted deaths was larger for strategy B than C,but cost to advert one death was lower for strategy C than B.Conclusions:This analysis permits to estimate the impact of two PC strategies for the control of strongyloidiasis in terms of costs and adverted infections/deaths.This could represent a basis on which each endemic country can evaluate which strategy can be implemented,based on available funds and national health priorities.展开更多
基金Guangdong Province Education Science Planning Project(Higher Education Special)“Construction and Practice of Applied Innovation Education System for Applied Undergraduate Mechanical Majors”(Project number:2023GXJK638)。
文摘As the country continues to promote the development of intelligent manufacturing,all industries are carrying out enterprise automation upgrading,the Pearl River Delta Intelligent Manufacturing Conference held in March 2024 provides a direction guide for each enterprise on how to integrate the intelligent manufacturing technology into each link and provide direction guidance for enterprises to create new models and new business formats.College teachers,in focusing on the teaching process,should closely match the enterprise and social needs and cultivate excellent students.As the core controller of automation control,the application of programmable controllers in teaching is particularly important.In practical classes,by setting progressive difficulty,project guidance,team collaboration,and other links,students can master the automation equipment design of programmable control in repeated practice.
基金supported by the Korea WESTERN POWER(KOWEPO)(2022-Commissioned Research-11,Development of Cyberattack Detection Technology for New and Renewable Energy Control System Using AI(Artificial Intelligence),50%)the Institute of Information&Communications Technology Planning&Evaluation(IITP)grant funded by the Korea government(MSIT)(No.2021-0-01806,Development of Security by Design and Security Management Technology in Smart Factory,40%)the Gachon University Research Fund of 2023(GCU-202110280001,10%).
文摘Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuators in the field.However,PLC has memory attack threats such as program injection and manipulation,which has long been a major target for attackers,and it is important to detect these attacks for ICS security.To detect PLC memory attacks,a security system is required to acquire and monitor PLC memory directly.In addition,the performance impact of the security system on the PLC makes it difficult to apply to the ICS.To address these challenges,this paper proposes a system to detect PLC memory attacks by continuously acquiring and monitoring PLC memory.The proposed system detects PLC memory attacks by acquiring the program blocks and block information directly from the same layer as the PLC and then comparing them in bytes with previous data.Experiments with Siemens S7-300 and S7-400 PLC were conducted to evaluate the PLC memory detection performance and performance impact on PLC.The experimental results demonstrate that the proposed system detects all malicious organization block(OB)injection and data block(DB)manipulation,and the increment of PLC cycle time,the impact on PLC performance,was less than 1 ms.The proposed system detects PLC memory attacks with a simpler detection method than earlier studies.Furthermore,the proposed system can be applied to ICS with a small performance impact on PLC.
文摘This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.
基金Supported by the International S&T Cooperation Program of China(No.2014DFR70280)Key Research and Development Project of Shanxi Province(No.201903D321012)+1 种基金Key Research and Development Project of Shanxi Province(No.201903D121023)Patent Promotion and Implementation Funding Research Project of Shanxi Province(No.20210521).
文摘In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and programmability of controlling software.In the aspect of design,the platform is composed of hardware controlling and software monitoring and is taking industrial computer as the core.Under the Windows environment,the platform establishes the control instruction set,develops the configuration function and visual programming function of the monitoring software and it integrates PLC controller based on Visual Basic software.In order to achieve the function of data monitoring,it has realized the serial communication between computer and PLC by using RS-485 and RS-232 serial ports line communication.The platform designs the intelligent instruction scheduling strategy by studying the encoding and decoding rules of the communication instruction set.It proposes a method for rapidly developing control programs by adopting the expert control mode,which enables clients to develop and modify programs conveniently by importing instructions in a non-coded manner.After experimental testing,the platform is proved successful achieving both the rapid development of PLC control system and the rapid modification of monitoring software.
基金The project supported by National Natural Science Foundation of China (No. 10175022) and Sichuan Provincial Youth Foundation
文摘The Ethernet and field-bus communications are used in the machine control system (MCS) of HL-2A. The control net, with a programmable logic controller (PLC) as its logic control master, an engineering control management station as its net server, and a timing control PC connected to a number of terminals, flexibly and freely transfers information among the nodes on it with the Ethernet transmission techniques. The PLC masters the field bus, which carries small pieces of information between PLC and the field sites reliably and quickly. The control net is connected into the data net, where Internet access and sharing of more experimental data are enabled. The communication in the MCS guarantees the digitalization, automation and centralization. Also provided are a satisfactory degree of safety, reliability, stability, expandability and flexibility for maintenance.
基金the National High Technology Development of China(863-818-01-02)
文摘This paper mainly represents the realization of synchro controller based on the programmable logic devices FPGA by request of HF ground wave radar synchro controller under the instance of making the best of the virtues of FPGA. This design introduces the data communication between PC and synchro controller by PC Bus, which can carry the synchronous signals parameters to RAM of synchro controller, then according to the theory that the result of comparing counter value with signals parameters is the needed wave, we produce all waves HF ground wave radar needs, moreover all waves are produced time-sharing in order to save resources.
文摘Bangladesh locates in lower reach of Ganges-Brahmaputra-Meghma, Bengal delta. Bangladesh is a land of rivers and heavy monsoon rains. Every year during monsoon period (May-September)the country floods of verying magnitude, it causes damages to crops, properties, infrastructures, etc. and ultimately affects the economy development of the country. Banglandesh flood has some features given below: 1. The excessive rainfall over the vast catchment area of the river is the main cause of flood in Bangladesh, but 90% of the flood carried by rivers come from outside the country, i.e. regional countries, India, Nepal,
文摘An innovation is conducted on a K190πK rail auto welding machine because of its poor stability in quality of welding joints. A new control system based on a programmable controller is designed to replace the old one. The new control system is of higher accuracy in controlling sequence and good ability in anti disturbance, and is convenient to operate. The comparison tests are carried out. The experimental results show that the quality of welded joints is greatly increased by the improved welding mechine.
文摘The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, material exchange station, multi-storeyed warehouse system, NC and CNC machines and host computer etc. The paper describes the transport control system and its design, and briefly describes the communication among devices and warehouse access principles.
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT:Ministry of Science and ICT)(Nos.NRF-2016M2A8A4952280 and NRF-2020R1A2C1012187).
文摘Cyberattacks on the Industrial Control System(ICS)have recently been increasing,made more intelligent by advancing technologies.As such,cybersecurity for such systems is attracting attention.As a core element of control devices,the Programmable Logic Controller(PLC)in an ICS carries out on-site control over the ICS.A cyberattack on the PLC will cause damages on the overall ICS,with Stuxnet and Duqu as the most representative cases.Thus,cybersecurity for PLCs is considered essential,and many researchers carry out a variety of analyses on the vulnerabilities of PLCs as part of preemptive efforts against attacks.In this study,a vulnerability analysis was conducted on the XGB PLC.Security vulnerabilities were identified by analyzing the network protocols and memory structure of PLCs and were utilized to launch replay attack,memory modulation attack,and FTP/Web service account theft for the verification of the results.Based on the results,the attacks were proven to be able to cause the PLC to malfunction and disable it,and the identified vulnerabilities were defined.
基金supported by the Natural Science Foundation of Ningxia province under grant No. NZ1151
文摘According to the demands for rapid and accurate burdening system, an automation forage burdening system was designed using a programmable logic controller (PLC) as the main controller. The communication between PLC and force control was achieved by485 bus. This system have many functions such as recipe setup, burdening control, feed mixture, report printing, and remote alarm. The remote surveillance and control of burdening system were realized. The practice shows that the system had high precision and short cycle, and great control effect was obtained.
文摘In order to help the small-scale farmer, an automatic irrigation control system was proposed. This system will provide an irrigation system that will ease the burden of the citizen to take care of the plant. This system will run automatically by referring to the time set by the user. As the name itself is a water control system, this system will only start irrigating when the time set triggered the water control level for the plant to grow healthily. It will automatically stop when the timer is off (1 hour). The brain of the system is the PLC (Programmable Logic Controller). This is the place where all the activities are done. The irrigation will be provided by a pump that is also connected to the microcontroller. The pump will be activated until the timer has reached its time set. This system will continue running until the user presses the OFF button.
文摘A new type of plasma arc equipment with four functions including plasma arc welding, cutting, spraying and a surfacing process was designed and manufactured. To obtain good processing stability and multifunction integration, a silicon controlled rectifier (SCR), and the programmable controller (PC) were introduced. The operation of this new machine shows that it has the advantage of simple circuit design, flexible control pattern, low fault rate and easy maintenance.
基金Supported by the National College Students’Entrepreneurship Practice Project(201510359010)Science and Technology Department of Anhui province Qiushi plan(JZ2015QSJH0245)
文摘In order to realize the processing and retrieval of magnetic thin sheet materials in industrial production, this paper proposed a kind of transfer device for magnetic thin sheet raw material, which uses rodless cylinders as the main motive device and the programmable logic controller (PLC) to achieve the required functions, and applies the finite element analysis method to analyze its main components in the end of the design.
基金This work was supported by the Australian Agency for International Development(AusAID)grant[grant number 44913]to the Health Information Systems Knowledge Hub,at the School of Population Health,the University of Queensland.
文摘Poverty magnifies limitations posed by traditional biases and environmental risks.Any approach towards disease control needs to recognise that socially embedded vulnerabilities can be as powerful as externally imposed infections.Asia Pacific has a specific panorama of infectious diseases,which,in common with other endemic areas,have a tendency to emerge or re-emerge if not carefully monitored.Sustained control aiming at elimination requires strong emphasis on surveillance and response.Well-designed informatics platforms can improve support systems and strengthen control activities,as they rapidly locate high-risk areas and provide detailed,up-to-date information on the performance of ongoing control programmes.
基金National High-Tech Research and Development Program Special Foundation of China(2002AA334130)
文摘This article introduces a computer numerical control (CNC)-based open hardware architecture system to realize the special functions of automated tape-laying (ATL) in a numerical control system. It associates a programmable multi-axis controller (PMAC) as the motion control unit with programmable numerical controllers (PCL-725, PCL-730) for on-off control. To bring about synchronized movements of the main 5-axis tape-laying head system and the 3-axis ultrasonic tape-cutting sub-system, the tracking-control method associated with time-based mode attributed to PMAC is applied in different cases. In addition, with the goal of realizing real-time tasks in the software system such as synchronizing motion control and on-off control, the real-time Win 2000 system is adopted. As a device driver for PMAC and PCL, a user graphical interface and a numerical control program interpretation module are also designed. This system is helpful to solve complicated problems in designing numerical controls for ATL such as ensuring high requirements for precise machine control and synchronization of motion control and on-off control.
基金supported by the National Key Research and Development Program of China under Grant No.2020YFB2010900the Fundamental Research Funds for the Central Universities(Zhejiang University NGICS Platform)of China under Grant No.TC190A449.
文摘Programmable logic controllers(PLCs)play a critical role in many industrial control systems,yet face increasingly serious cyber threats.In this paper,we propose a novel PLC-compatible software-based defense mechanism,called Heterogeneous Redundant Proactive Defense Framework(HRPDF).We propose a heterogeneous PLC architecture in HRPDF,including multiple heterogeneous,equivalent,and synchronous runtimes,which can thwart multiple types of attacks against PLC without the need of external devices.To ensure the availability of PLC,we also design an inter-process communication algorithm that minimizes the overhead of HRPDF.We implement a prototype system of HRPDF and test it in a real-world PLC and an OpenPLC-based device,respectively.The results show that HRPDF can defend against multiple types of attacks with 10.22%additional CPU and 5.56%additional memory overhead,and about 0.6 ms additional time overhead.
基金funded by the Italian Ministry of Health"Fondi Ricerca Corrente-L2P2"to IRCCS Sacro Cuore Don Calabria Hospital,Negrar,Verona,Italy and by funds of"Ministry of Education,University and Research(Italy)Excellence Departments 2018-2022"Project for the Department of Experimental and Clinical Medicine,University of Florenee,Florenee,Italy.
文摘Background:Implementation of control programmes for Strongyloides stercoralis infection is among the targets of the World Health Organization Roadmap to 2030.Aim ofthis work was to evaluate the possible impact in terms of economic resources and health status of two different strategies of preventive chemotherapy(PC)compared to the current situation(strategy A,no PC):administration of ivermectin to school-age children(SAC)and adults(strategy B)versus ivermectin to SAC only(strategy C).Methods:The study was conducted at the IRCCS Sacro Cuore Don Calabria hospital,Negrar di Valpolicella,Verona,Italy,at the University of Florence,Italy,and at the WHO,Geneva,Switzerland,from May 2020 to April 2021.Data for the model were extracted from literature.A mathematical model was developed in Microsoft Excel to assess the impact of strategies B and C in a standard population of 1 million subjects living in a strongyloidiasis endemic area.In a case base seenario,15%prevalence of strongyloidiasis was considered;the 3 strategies were then evaluated at different thresholds of prevalenee,ranging from 5 to 20%.The results were reported as number of infected subjects,deaths,costs,and Incremental-Effectiveness Ratio(ICER).A 1-year and a 10-year horizons were considered.Results:In the case base seenario,cases of infections would reduce dramatically in the first year of implementation of PC with both strategy B and C:from 172500 cases to 77040 following strategy B and 146700 following strategy C.The additional cost per recovered person was United States Dollar(USD)2.83 and USD 1.13 in strategy B and C,respectively,compared to no treatment in the first year.For both strategies,there was a downtrend in costs per recovered person with increasing prevalenee.The number of adverted deaths was larger for strategy B than C,but cost to advert one death was lower for strategy C than B.Conclusions:This analysis permits to estimate the impact of two PC strategies for the control of strongyloidiasis in terms of costs and adverted infections/deaths.This could represent a basis on which each endemic country can evaluate which strategy can be implemented,based on available funds and national health priorities.