Controlled Rolling and Cooling Process for Low Carbon Cold Forging Steel

Effect of controlled rolling and cooling process on the mechanical properties of low carbon cold forging steel was investigated for different processing parameters of a laboratory hot rolling mill. The results show that the specimens with fast cooling after hot rolling exhibit very good mechanical properties, and the improvement of the mechanical properties can be attributed mainly to the ferrite-grain refinement. The mechanical properties increase with decreasing final cooling temperature within the range from 670 ℃ to 570 ℃ due to the finer interlamellar spacing of pearlite colony. The specimen with fast cooling after low temperature rolling shows the highest values of the mechanical properties. The effect of the ferrite grain size on the mechanical properties was greater than that of pearlite morphology in the present study. The mechanical properties of specimens by controlled rolling and cooling process without thermal treatment were greatly superior to that of the same specimens by the conventional rolling, and their tensile strength reached 490 MPa grade even in the case of low temperature rolling without controlled rolling. It might be expected to realize the substitution medium-carbon by low-carbon for 490 MPa grade cold forging steel with controlled rolling and cooling process.

EFFECT OF THE CONTROLLED ROLLING CONTROLLED COOLING ON STRENGTH AND DUCTILITY OF THE BAINITE MICRO ALLOYED ENGINEERING STEEL

The continuous cooling transformation of hot deformation austenite austenite of test steel and the effect of different processing schedules of controlled rolling and controlled cooling on the strength and ductility have been studied. The theory and the experiment base are presented for controlled rolling and controlled cooling of the SBL micro alloyed engineering steel.

Development of integrated reheating,rolling and cooling models for stelmor production line

Production characteristics of high speed rod are fast speed,complex section and internal microstructure evolution,which bring great problems to analyze and solve the quality disputes.Therefore,a serial process models have been developed based on the characteristics of high speed rod:due to rod stock to be square section,a two dimension model has been developed to predict the evolution of internal temperature and grain coarsening.As for the rod rolling process,an automatic section design system has been written, which can show section filling condition and process parameters such as temperature,pressure and recrystallization etc per pass.As for rod cooling stage,an integrated model which coupled phase transformation,temperature and final properties was developed and applied in real production with good results.

Self-Learning and Its Application to Laminar Cooling Model of Hot Rolled Strip

The mathematical model for online controlling hot rolled steel cooling on run-out table （ROT for abbreviation） was analyzed, and water cooling is found to be the main cooling mode for hot rolled steel. The calculation of the drop in strip temperature by both water cooling and air cooling is summed up to obtain the change of heat transfer coefficient. It is found that the learning coefficient of heat transfer coefficient is the kernel coefficient of coiler temperature control （CTC） model tuning. To decrease the deviation between the calculated steel temperature and the measured one at coiler entrance, a laminar cooling control self-learning strategy is used. Using the data acquired in the field, the results of the self-learning model used in the field were analyzed. The analyzed results show that the self-learning function is effective.

Opti mization and Model of Laminar Cooling Control Systemfor Hot Strip Mills

The structure of laminar cooling control system for hot rolling was introduced and the control mode, cooling strategy, segment tracking and model recalculation were analyzed. The parameters of air/water cooling models were optimized by regressing the data gathering in situ, and satisfactory effect was obtained. The coiling temperature can be controlled within ±15℃.

An Expert System in Automatic Gauge Control for Rolling Process

Beacuse the practical mathematic model of rolling process can't be built accurately,this paper established an expert system to control the rolling steels' gauge by adjusting the setup roll open, which combined the experience of theoreticians and operators. The system applied the expression method of rule-skeleton+rule-body', and selected an appropriate non-exact reference model and self-study algorithm. The whole system, including auxiliary routes, is designed in Borland C++. Some experiments on this system have been done, and a good result has been achieved.

Influence of Controlled Rolling and Cooling Process on the Mechanical Properties of Low Carbon Cold Forging Steel

In the present paper,controlled rolling and cooling processing was conducted by using a laboratory hot rolling mill.The influence of different processing parameters on the mechanical properties of low carbon cold forging steel was investigated.The results show that the faster cooling after the deformation (especially in low temperature rolling conditions) leads to the refinement of the ferrite grain.The specimen exhibits very good mechanical properties owing to the finer ferrite grains.The pearlite morphologies can also affect the mechanical properties of low carbon cold forging steel.The mechanical properties increase with decreasing final cooling temperature within the range from 650℃ to 570 ℃ due to the finer interlamellar spacing of pearlite colony.The mechanical properties of the specimens with fast cooling after the conventional rolling are not only better than those of the specimens with slow cooling after low temperature rolling,but also almost similar to those of the specimens with fast cooling after low temperature rolling.It is suggested that fast cooling after high temperature rolling (the conventional rolling) process would be of important industrial value.

Maxi mumprinciple for the optimal control of an ablation-transpiration cooling system with free final time and phase constraints

This paper is concerned with an optimal control problem of an abhtion-transpiration cooling control system with Stefan-Signorini boundary condition. As the continuation of the authors＇previous paper, the Dubovits Rii-Milyutin fimctional approach is again adopted in investigation of the Pontryagin＇ s maximun principle of the system. The necessary optimality condition is presented for the problem with free final horizon and phase constraints.

Application of difference arithmetic in the continuous annealing process line cooling control at Baosteel

Some of the main cooling processes and equipment that are currently being used in the continuous annealing process line （CAPL） at Baosteel are introduced, as well as their cooling control model techniques, the modeling principium and their application results. With charts indicating the control trends in real processes, the powerful adjusting ability of the control models with process variable differences and their excellent control precision are shown in this study.

The development and application of ultra fast cooling in hot-rolled

Ultra fast cooling is a new technology which used to control the hot-rolling strip cooling in recent years on the international developed.If suitably cooperated with a number of other new controlled rolling technologies,can achieve fast and accurate temperature control in the hot-rolled strip production process to obtain corresponding transformation microstructure and ideal mechanical properties.This article describes the technical principle and layout of ultra fast cooling in hot-rolled as well as application profiles in the major iron and steel enterprise in China and abroad.Carried out the layout of ultra fast cooling analysis on the adaptability of steel that install between the finishing mill and laminar cooling,on this basis,proposed the use of ultra fast cooling technology proposals.

Development and application of cold strip rolling flatness control system in Ansteel

In this paper,the flatness control technology AnShaper^(TM) for cold-rolling mill and industry application are introduced.AnShaper^(TM) includes;partitioning piezomagnetic shape meter for flatness measurement for cold-rolling strip;flatness measured signals processing system based on digital signal processing(DSP);flatness feedback control model system based on the control efficiency of flatness control actuators and model adaptive function.The application verifies that strip flatness can meet the need of high quality product by using AnShaperTM.The average flatness quality is about 5Ⅰ-unit and the 0.18 mm ultrathin thickness strip flatness is 10Ⅰ-unit.

某大科学装置项目工艺冷却水系统设计

介绍了某在建大科学装置项目的工艺冷却水系统设计,包括服务对象、系统形式、系统组成、水温控制策略、流量控制策略等方面的内容。简述了热回收型水源热泵在工艺冷却水系统中的应用方案,并对工艺冷却水系统设计后续可开展的工作和研究提出了3个方向。

大型连续绿茶精制加工生产线研发

茶叶加工技术与装备是茶叶产业发展的基础,对行业发展起着举足轻重的作用。为实现绿茶加工机械自动化生产,设计了大型连续绿茶精制加工生产线,阐述了该生产线系统结构、主要生产环节及安装调试应用。基于PLC控制的大型连续绿茶精制加工生产线,主要由鲜叶上料输送机、大型滚筒杀青机、冷却回潮机、四机协同联动式揉捻机组、并列连续预烘干机组、储料仓、计量分料装置、茶叶炒干与抛光机组、筛分装置、风选装置及配套的测控系统等组成。针对绿茶加工工艺的各个环节,采用模块化设计,根据茶叶加工企业的厂房实际情况,灵活安装组线,满足企业个性化需求。基于模糊PID温度控制的大型滚筒杀青机双模糊控制技术,解决了传统杀青温度与时间无法实现精确控制的难点问题。采用链式刮板输送智能加料装置与多机联动协同连续揉捻控制技术,实现多机协同联动式自动加料连续揉捻,边进料边揉捻,揉捻均匀度高。生产线上杀青机、理条机和烘干机各环节温度采用模糊PID控制,解决了茶叶加工温度、投叶量与杀青、理条、烘干时间实时配合的问题,输入不同等级、不同重量的鲜叶可输出相适应的杀青温度和时间,实现对茶叶生产过程的精确控制,减少人为因素的干扰,实现绿茶的智能化生产。近年来,生产线用户遍布皖、苏、浙、云、贵、川、豫、湘、鄂和陕等10多个省份200余家茶叶生产企业。该生产线的推广应用,实现了茶叶规模化生产,保证了茶叶品质,对茶产业发展具有重要意义。

国内铜板带发展现状与热轧技术的创新方向分析

文章论述了国内铜板带行业的发展现状,指出铜板带的热轧应分别从理论和技术,生产和工艺,设备设计制造,生产线配置和工程设计等方面进行基础性的研究和改进,并在工程项目的实践中不断创新。

低浓度含氧煤层气净化控制系统设计

低浓度含氧煤层气直接含氧液化精馏制液化天然气(LNG),在充分利用低浓度煤层气的同时又避免了煤矿瓦斯气直接排放造成的大气污染。首先,分析了含氧煤层气制LNG工艺中净化工段的工艺流程,结合工艺要求设计了可靠的控制系统。然后,根据低浓度含氧煤层气净化控制的工艺要求和系统规模,构建了分布式控制系统(DCS)的总体架构。在此基础上进行了硬件系统功能的选型及配置,以及对DCS软件的组态设计。最后,实现了DCS在工程实例中的一体化应用。该系统的应用提高了生产效率和产品质量,为工艺流程的稳定运行提供了安全保障。

热轧H型钢生产工艺技术

简述了H型钢的发展现状及H型钢的应用特点,从轧钢工艺方面介绍了小型、中型、大型H型钢国内比较常见的几种生产方法,包括全连续、半连续以及半连续往复穿梭轧制法,并通过国内主要型钢厂的实例,对几种轧制方法进行阐述。同时介绍了国内H型钢未来的发展趋势及新技术的应用。

Effect of controlled rolling/controlled cooling parameters on microstructure and mechanical properties of the novel pipeline steel

The study of controlled rolling/controlled cooling process parameters which affect the microstructure and mechanical properties of a novel pipeline steel has been optimized by the orthogonal experiment with four factors and three levels in this paper. However, the parameters of thermo-mechanical control process （TMCP） optimized by the Gleeble-3500 hot simulator could not satisfy performance requirements of the X100 pipeline steel. In order to improve the performance of this steel, the influence of finish cooling temperature （FCT） on the microstructure and property is studied in detail. It is found that, as this steel is thermo-mechanically treated by this set of parameters （the start heating temperature, finish rolling temperature （FRT）, FCT and cooling rate of 1,180 ℃, 810 ℃, 350 ℃ and 35 ℃/s, respectively）, the micro- structures are mainly composed of granular bainite （GB） and acicular ferrite （AF）. The effective grain sizes are below 20 μm; the steel reaches the optimal balance between the strength and the toughness; the yield strength is 695 MPa; the tensile strength is 768 MPa; the elongation is 16.6 %; the impact energy is 262 J at room temperature. All indexes could meet the requirements of X100 pipeline steel.

The Study on the Microstructure and Mechanical Properties of 400MPa Grade Bar Prepared by Controlled Cooling After Finish Rolling

The production process of bars in Baosteel Nantong Co.Ltd.was adjusted by both decreasing heating temperature and adding controlling cooling procedure after finish rolling for upgrade of bars.A set of water cooling system was also installed behind the finishing mill.On-line tests were conducted,and then the microstructure and mechanical properties of the bars with HRB335 composition and φ22mm diameter were studied.The results showed that the microstructures of the bar cooled by water were ferrite and pearlite with grain sizes of 8.5 to 12 grades,which were finer than that of the bar without water cooling.While the thin outer layer microstructures of the bar cooled by water were mainly tempered sorbite with small amount of tempered troosite.The average yield strength R eL and tensile strength R m of the bars with water cooling increased 105MPa and 73MPa respectively compared with those of the bars without water cooling.The reason of this strengthening was attributed to the synthetic role of fine grains and phase transformation and precipitation mechanism.In addition,The ration of R m /R eL could be higher than 1.25,which is the request of earthquake-proof performance for HRB400E,only when the self-tempering temperatures of the bars were higher than 640℃.

L360N无缝管线钢管的控轧控冷生产工艺开发

某PQF连轧管机组生产Ф273 mm×8 mm规格L360N无缝管线钢管时,采用常规热轧、控制轧制、控制轧制+控制冷却三种方式组织生产,分析了这三种工艺生产的无缝钢管的性能与组织差别。工业试验表明,控制轧制+控制冷却可以明显细化晶粒,在提高钢管拉伸性能的同时,可大幅提高钢管的冲击韧性,合理的控轧控冷工艺可使钢管稳定满足-30℃冲击值的要求。

圆柱齿轮滚轧成形数值模拟与突耳控制

滚轧成形技术可有效提高金属材料利用率、改善齿轮疲劳强度。对直齿圆柱齿轮的滚轧成形技术进行研究,推导齿面方程,实现了齿面点计算,利用DEFORM软件对直齿圆柱齿轮滚轧成形过程进行了模拟仿真,分析了等效应力场、等效应变场以及滚轧力的变化情况,明晰了各个阶段最大应变发生于坯料齿形中点偏齿根处、应力最大值在模具轮和坯料的接触处这一规律;探索了滚轧中突耳缺陷的形成机制,研究了摩擦因数对突耳的作用规律,实现了面向突耳控制的摩擦因数的优选,为圆柱齿轮的滚轧成形加工提供了理论基础。