Local Torrential Rainfall Event within a Mei-Yu Season Mesoscale Convective System:Importance of Back-Building Processes

An extreme rainfall event occurred over Hangzhou,China,during the afternoon hours on 24 June 2013.This event occurred under suitable synoptic conditions and the maximum 4-h cumulative rainfall amount was over 150 mm.This rainfall event had two major rainbands.One was caused by a quasi-stationary convective line,and the other by a backbuilding convective line related to the interaction of the outflow boundary from the first rainband and an existing low-level mesoscale convergence line associated with a mei-yu frontal system.The rainfall event lasted 4 h,while the back-building process occurred in 2 h when the extreme rainfall center formed.So far,few studies have examined the back-building processes in the mei-yu season that are caused by the interaction of a mesoscale convergence line and a convective cold pool.The two rainbands are successfully reproduced by the Weather Research and Forecasting(WRF)model with fourlevel,two-way interactive nesting.In the model,new cells repeatedly occur at the west side of older cells,and the backbuilding process occurs in an environment with large CAPE,a low LFC,and plenty of water vapor.Outflows from older cells enhance the low-level convergence that forces new cells.High precipitation efficiency of the back-building training cells leads to accumulated precipitation of over 150 mm.Sensitivity experiments without evaporation of rainwater show that the convective cold pool plays an important role in the organization of the back-building process in the current extreme precipitation case.

Understanding Simulated Causes of Damaging Surface Winds in a Derecho-Producing Mesoscale Convective System near the East China Coast Based on Convection-Permitting Simulations

A mesoscale convective system(MCS) occurred over the East China coastal provinces and the East China Sea on 30April 2021, producing damaging surface winds near the coastal city Nantong with observed speeds reaching 45 m s^(–1). A simulation using the Weather Research and Forecasting model with a 1.5-km grid spacing generally reproduces the development and subsequent organization of this convective system into an MCS, with an eastward protruding bow segment over the sea. In the simulation, an east-west-oriented high wind swath is generated behind the gust front of the MCS. Descending dry rear-to-front inflows behind the bow and trailing gust front are found to feed the downdrafts in the main precipitation regions. The inflows help to establish spreading cold outflows and enhance the downdrafts through evaporative cooling. Meanwhile, front-to-rear inflows from the south are present, associated with severely rearward-tilted updrafts initially forming over the gust front. Such inflows descend behind(north of) the gust front, significantly enhancing downdrafts and near-surface winds within the cold pool. Consistently, calculated trajectories show that these parcels that contribute to the derecho originate primarily from the region ahead(south) of the east-west-oriented gust front, and dry southwesterly flows in the low-to-middle levels contribute to strong downdrafts within the MCS. Moreover, momentum budget analyses reveal that a large westward-directed horizontal pressure gradient force within the simulated cold pool produced rapid flow acceleration towards Nantong. The analyses enrich the understanding of damaging wind characteristics over coastal East China and will prove helpful to operational forecasters.

Experimental Study and Thermal Modelling of Cocoa Shell Convective Drying in an Indirect Solar Dryer

The concern of the present work is the convective drying of empty cocoa shells in an indirect solar dryer. Some drying experiments, using one sample, were carried out. During the experiments, the sample is introduced in the drying chamber. Then at steady time intervals, the sample is withdrawn from the drying chamber, for a rapid weighing. After each weighing, the sample is reintroduced in the dryer. At each time interval, the ambient temperature of the drying chamber and its relative humidity γ are measured by a thermo-hygrometer. From the experimental data, a theoretical determination of the moisture evaporated from the product was performed and a good agreement was found between the theoretical and experimental values, confirmed by the value of the RMSE. Those calculations used the constants in the Nusselt number found in literature. Then those constants were evaluated again, to get new values more suitable with the experimental data. The dimensionless numbers of Nusselt, Grashof and Prandtl were calculated. That allowed the calculation of the average value of the Nusselt number. The average convective heat transfer coefficient was determined.

Semi-analytical investigation of heat transfer in a porous convective radiative moving longitudinal fin exposed to magnetic field in the presence of a shape-dependent trihybrid nanofluid

The thermal examination of a non-integer-ordered mobile fin with a magnetism in the presence of a trihybrid nanofluid(Fe_3O_4-Au-Zn-blood) is carried out. Three types of nanoparticles, each having a different shape, are considered. These shapes include spherical(Fe_3O_4), cylindrical(Au), and platelet(Zn) configurations. The combination approach is utilized to evaluate the physical and thermal characteristics of the trihybrid and hybrid nanofluids, excluding the thermal conductivity and dynamic viscosity. These two properties are inferred by means of the interpolation method based on the volume fraction of nanoparticles. The governing equation is transformed into a dimensionless form, and the Adomian decomposition Sumudu transform method(ADSTM) is adopted to solve the conundrum of a moving fin immersed in a trihybrid nanofluid. The obtained results agree well with those numerical simulation results, indicating that this research is reliable. The influence of diverse factors on the thermal overview for varying noninteger values of γ is analyzed and presented in graphical representations. Furthermore, the fluctuations in the heat transfer concerning the pertinent parameters are studied. The results show that the heat flux in the presence of the combination of spherical, cylindrical, and platelet nanoparticles is higher than that in the presence of the combination of only spherical and cylindrical nanoparticles. The temperature at the fin tip increases by 0.705 759% when the value of the Peclet number increases by 400%, while decreases by 11.825 13% when the value of the Hartman number increases by 400%.

Hybrid Effects on MHD Mixed Convective Boundary Layer Flow through a Sloped Plate in Existence of Nanofluid-Saturated Porous Medium

This study examines the effects of heat, mass, and boundary layer assumptions-based nanoparticle characteristics on the hybrid effects of using MHD in conjunction with mixed convective flow through a sloped vertical pore plate in the existence of medium of porous. Physical characteristics such as thermo-diffusion, injection-suction, and viscous dissipation are taken into consideration, in addition to an equally distributed magnetic force utilized as well in the completely opposite path of the flow. By means of several non-dimensional transformations, the momentum, energy, concentration, and nanoparticle volume fraction equations under investigation are converted in terms of nonlinear boundary layer equations and computationally resolved by utilizing the sixth-order Runge-Kutta strategy in combination together with the iteration of Nachtsheim-Swigert shooting procedure. By contrasting the findings produced for a few particular examples with those found in the published literature, the correctness of the numerical result is verified, and a rather good agreement is found. Utilizing various ranges of pertinent factors, computing findings are determined not only regarding velocity, temperature, and concentration as well as nanoparticle fraction of volume but also concerning with local skin-friction coefficient, local Nusselt and general Sherwood numbers associated with nanoparticle Sherwood number. The findings of the study demonstrate that increasing the fluid suction parameter decreases the velocity and temperature of the flow field in conjunction with concentration and has a variable impact on the nanoparticle fraction of volume, despite an increasing behavior in the local skin friction coefficient and local Nusselt as well as general Sherwood numbers and an increasing behavior in the local nanoparticle Sherwood number. Furthermore, enhancing a Schmidt number leads to a reduction in the local nanoparticle Sherwood number and a rise in the nanoparticle proportion of volume. Along with concentration, it also reduces temperature and velocity. However, it also raises the local Sherwood and Nusselt numbers and reduces the local skin friction coefficient.

Synergistic Effect of the Planetary-scale Disturbance, Typhoon and Meso-β-scale Convective Vortex on the Extremely Intense Rainstorm on 20 July 2021 in Zhengzhou

On 20 July 2021,northern Henan Province in China experienced catastrophic flooding as a result of an extremely intense rainstorm,with a record-breaking hourly rainfall of 201.9 mm during 0800–0900 UTC and daily accumulated rainfall in Zhengzhou City exceeding 600 mm(“Zhengzhou 7.20 rainstorm”for short).The multi-scale dynamical and thermodynamical mechanisms for this rainstorm are investigated based on station-observed and ERA-5 reanalysis datasets.The backward trajectory tracking shows that the warm,moist air from the northwestern Pacific was mainly transported toward Henan Province by confluent southeasterlies on the northern side of a strong typhoon In-Fa(2021),with the convergent southerlies associated with a weaker typhoon Cempaka(2021)concurrently transporting moisture northward from South China Sea,supporting the rainstorm.In the upper troposphere,two equatorward-intruding potential vorticity(PV)streamers within the planetary-scale wave train were located over northern Henan Province,forming significant divergent flow aloft to induce stronger ascending motion locally.Moreover,the converged moist air was also blocked by the mountains in western Henan Province and forced to rise so that a deep meso-β-scale convective vortex(MβCV)was induced over the west of Zhengzhou City.The PV budget analyses demonstrate that the MβCV development was attributed to the positive feedback between the rainfall-related diabatic heating and high-PV under the strong upward PV advection during the Zhengzhou 7.20 rainstorm.Importantly,the MβCV was forced by upper-level larger-scale westerlies becoming eastward-sloping,which allowed the mixtures of abundant raindrops and hydrometeors to ascend slantwise and accumulate just over Zhengzhou City,resulting in the record-breaking hourly rainfall locally.

Impact of Revised Trigger and Closure of the Double-Plume Convective Parameterization on Precipitation Simulations over East Asia

A double-plume convective parameterization scheme is revised to improve the precipitation simulation of a global model(Global-to-Regional Integrated Forecast System;GRIST).The improvement is achieved by considering the effects of large-scale dynamic processes on the trigger of deep convection.The closure,based on dynamic CAPE,is improved accordingly to allow other processes to consume CAPE under the more restricted convective trigger condition.The revised convective parameterization is evaluated with a variable-resolution model setup(110–35 km,refined over East Asia).The Atmospheric Model Intercomparison Project(AMIP)simulations demonstrate that the revised convective parameterization substantially delays the daytime precipitation peaks over most land areas,leading to an improved simulated diurnal cycle,evidenced by delayed and less frequent afternoon precipitation.Meanwhile,changes to the threshold of the trigger function yield a small impact on the diurnal amplitude of precipitation because of the consistent setting of dCAPE-based trigger and closure.The simulated mean precipitation remains reasonable,with some improvements evident along the southern slopes of the Tibetan Plateau.The revised scheme increases convective precipitation at the lower levels of the windward slope and reduces the large-scale precipitation over the upper slope,ultimately shifting the rainfall peak southward,which is in better agreement with the observations.

Organizational Modes and Environmental Conditions of the Severe Convective Weathers Produced by the Mesoscale Convective Systems in South China

Composite radar reflectivity data during April-September 2011-2015 are used to investigate and classify storms in south China(18-27°N;105-120°E). The storms appear most frequently in May. They are either linear;cellular or nonlinear systems, taking up 29.45%, 24.51% and 46.04%, respectively, in terms of morphology. Linear systems are subdivided into six morphologies: trailing stratiform precipitation(TS), bow echoes(BE), leading stratiform precipitation(LS), embedded line(EL), no stratiform precipitation(NS) and parallel stratiform precipitation(PS). The TS and NS modes have the highest frequencies but there are only small samples of LS(0.61%) and PS(0.79%) modes.Severe convective wind(≥17m s-1at surface level) accounts for the highest percentage(35%) of severe convective weather events produced by cellular systems including individual cells(IC) and clusters of cells(CC). Short-duration heavy rainfall(≥50 mm h-1) and severe convective wind are the most common severe weather associated with TS and BE modes. Comparison of environmental physical parameters shows that cellular convection systems tend to occur in the environment with favorable thermal condition, substantial unstable energy and low precipitable water from the surface to300 hPa(PWAT). However, the environmental conditions favoring the initiation of linear systems feature strong vertical wind shear, high PWAT, and intense convective inhibition. The environmental parameters favoring the initiation of nonlinear systems are between those of the other two types of morphology.

Convective flow of Jeffrey nanofluid along an upright microchannel with Hall current and Buongiorno model:an irreversibility analysis

The thermal properties and irreversibility of the Jeffrey nanofluid through an upright permeable microchannel are analyzed by means of the Buongiorno model.The effects of the Hall current,exponential space coefficient,nonlinear radiation,and convective and slip boundary conditions on the Jeffrey fluid flow are explored by deliberating the buoyant force and viscous dissipation.The non-dimensionalized equations are obtained by employing a non-dimensional system,and are further resolved by utilizing the shooting approach and the 4th-and 5th-order Runge-Kutta-Fehlberg approaches.The obtained upshots conclude that the amplified Hall parameter will enhance the secondary flow profile.The improvement in the temperature parameter directly affects the thermal profile,and hence the thermal field declines.A comparative analysis of the Newtonian fluid and non-Newtonian fluid(Jeffrey fluid)is carried out with the flow across a porous channel.In the Bejan number,thermal field,and entropy generation,the Jeffrey nanofluid is more highly supported than the Newtonian fluid.

Preface to the Special Issue on the 14th International Conference on Mesoscale Convective Systems and High-Impact Weather

A mesoscale convective system(MCS)is an organized cluster of thunderstorms known to be the most important convective mode in causing disastrous high-impact weather,such as heavy rainfall,hail,damaging winds,and tornadoes.The small spatial scale and fast temporal evolution of MCSs make their observation and prediction very challenging.East Asia is home to the world’s most prominent monsoon,setting the stage for various severe convective weather events.MCSs and their associated high-impact weather have long been critical issues of concern;as such,their research efforts are valued by governments in East Asia.

Erratum to: A Two-plume Convective Model forPrecipitation Extremes

Erratum to:Yin,Z.H.,P.X.Dai,and J.Nie,2021:A two-plume convective model for precipitation extremes.Adv.Atmos.Sci.,38(6),957−965,https://doi.org/10.1007/s00376-021-0404-8.

Entropy generation analysis from the time-dependent quadratic combined convective flow with multiple diffusions and nonlinear thermal radiation

Diffusions of multiple components have numerous applications such as underground water flow, pollutant movement, stratospheric warming, and food processing. Particularly, liquid hydrogen is used in the cooling process of the aeroplane. Further, liquid nitrogen can find applications in cooling equipment or electronic devices, i.e., high temperature superconducting(HTS) cables. So, herein, we have analysed the entropy generation(EG), nonlinear thermal radiation and unsteady(time-dependent) nature of the flow on quadratic combined convective flow over a permeable slender cylinder with diffusions of liquid hydrogen and nitrogen. The governing equations for flow and heat transfer characteristics are expressed in terms of nonlinear coupled partial differential equations. The solutions of these equations are attempted numerically by employing the quasilinearization technique with the implicit finite difference approximation. It is found that EG is minimum for double diffusion(liquid hydrogen and heat diffusion)than triple diffusion(diffusion of liquid hydrogen, nitrogen and heat). The enhancing values of the radiation parameter R_(d) and temperature ratio θ_(w) augment the fluid temperature for steady and unsteady cases as well as the local Nusselt number. Because, the fluid absorbs the heat energy released due to radiation, and in turn releases the heat energy from the cylinder to the surrounding surface.

Effect of periodic heat transfer on the transient thermal behavior of a convective-radiative fully wet porous moving trapezoidal fin

A moving trapezoidal profiled convective-radiative porous longitudinal fin wetted in a single-phase fluid is considered in the current article.The periodic variation in the fin base temperature is taken into account along with the temperature sensitive thermal conductivity and convective heat transfer coefficients.The modeled problem,which is resolved into a non-linear partial differential equation(PDE),is made dimensionless and solved by employing the finite difference method(FDM).The results are displayed through graphs and discussed.The effects of amplitude,frequency of oscillation,wet nature,Peclet number,and other relevant quantities on the distribution of temperature through the fin length and with the dimensionless time are investigated.It is deciphered that the periodic heat transfer gives rise to the wavy nature of the fin thermal profile against time.The analysis is beneficial in the design of fin structures for applications like solar collectors,space/airborne applications,and refrigeration industries.

Convective Storm VIL and Lightning Nowcasting Using Satellite and Weather Radar Measurements Based on Multi-Task Learning Models

Convective storms and lightning are among the most important weather phenomena that are challenging to forecast.In this study,a novel multi-task learning(MTL)encoder-decoder U-net neural network was developed to forecast convective storms and lightning with lead times for up to 90 min,using GOES-16 geostationary satellite infrared brightness temperatures(IRBTs),lightning flashes from Geostationary Lightning Mapper(GLM),and vertically integrated liquid(VIL)from Next Generation Weather Radar(NEXRAD).To cope with the heavily skewed distribution of lightning data,a spatiotemporal exponent-weighted loss function and log-transformed lightning normalization approach were developed.The effects of MTL,single-task learning(STL),and IRBTs as auxiliary input features on convection and lightning nowcasting were investigated.The results showed that normalizing the heavily skew-distributed lightning data along with a log-transformation dramatically outperforms the min-max normalization method for nowcasting an intense lightning event.The MTL model significantly outperformed the STL model for both lightning nowcasting and VIL nowcasting,particularly for intense lightning events.The MTL also helped delay the lightning forecast performance decay with the lead times.Furthermore,incorporating satellite IRBTs as auxiliary input features substantially improved lightning nowcasting,but produced little difference in VIL forecasting.Finally,the MTL model performed better for forecasting both lightning and the VIL of organized convective storms than for isolated cells.

Mathematical modeling of mixed convective MHD Falkner-Skan squeezed Sutterby multiphase flow with non-Fourier heat flux theory and porosity

In a wide variety of mechanical and industrial applications,e.g.,space cooling,nuclear reactor cooling,medicinal utilizations(magnetic drug targeting),energy generation,and heat conduction in tissues,the heat transfer phenomenon is involved.Fourier’s law of heat conduction has been used as the foundation for predicting the heat transfer behavior in a variety of real-world contexts.This model’s production of a parabolic energy expression,which means that an initial disturbance would immediately affect the system under investigation,is one of its main drawbacks.Therefore,numerous researchers worked on such problem to resolve this issue.At last,this problem was resolved by Cattaneo by adding relaxation time for heat flux in Fourier’s law,which was defined as the time required to establish steady heat conduction once a temperature gradient is imposed.Christov offered a material invariant version of Cattaneo’s model by taking into account the upper-connected derivative of the Oldroyd model.Nowadays,both models are combinedly known as the Cattaneo-Christov(CC)model.In this attempt,the mixed convective MHD Falkner-Skan Sutterby nanofluid flow is addressed towards a wedge surface in the presence of the variable external magnetic field.The CC model is incorporated instead of Fourier’s law for the examination of heat transfer features in the energy expression.A two-phase nanofluid model is utilized for the implementation of nano-concept.The nonlinear system of equations is tackled through the bvp4c technique in the MATLAB software 2016.The influence of pertinent flow parameters is discussed and displayed through different sketches.Major and important results are summarized in the conclusion section.Furthermore,in both cases of wall-through flow(i.e.,suction and injection effects),the porosity parameters increase the flow speed,and decrease the heat transport and the influence of drag forces.

Numerical Study of Natural Convective Heat Transfer in an Air Filled Square Cavity Heated from Below and Symmetrically Cooled from the Sides with a Partition in the Hot Wall

A two-dimensional numerical study of laminar natural convection in a square enclosure filled with air with a wall partially heated on the bottom is presented.The heat source is located on the lower wall with different heated widths varied from 20 to 80%(ε=0.2–0.8)of the total width of the lower wall and different heights h=H/4 and H/2 of the partition.The effect of the partition height on the main system dynamics is investigated through solution of the two-dimensional Navier-Stokes equations and the energy equation by means of a finite volume method based on the SIMPLE algorithm.The influence of the Rayleigh number(Ra=10^(3) to 10^(6))and the hot wall length is also examined.It is shown that the average Nusselt number grows whenεincreases and when h decreases.For a given value ofεand h,the average Nusselt number increases as Ra increases.It is concluded that the partition height causes a decrease in the average Nusselt number.

Solid-phase sintering process and forced convective heat transfer performance of porous-structured micro-channels

A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was studied and optimized to obtain porous-structured micro-channels with high porosity. The flow resistance and heat transfer performance in the composite micro-channels were investigated. The composite micro-channels show acceptable flow resistance, significant enhancement of heat transfer and dramatic improvement of flow boiling stability, which indicates a promising prospect for the application in forced convective heat transfer.

Analysis of a Large-Scale Strong Convective Weather under a Weak Water Vapor Condition in Shanxi, China in Spring

This article uses NCEP 1° × 1° grid point reanalysis data, conventional meteorological observation data, FY2G satellite TBB data, radar combined reflectivity data, ground-encrypted automatic station observation data, etc., through the synoptic diagnostic analysis method for a comprehensive analysis of a large-scale underreporting of a strong convective weather process under weak water vapor conditions on the 13th April 2017. The results show that the severe convective weather process is affected by the short-wave disturbance in the northwesterly airflow, triggered by the uplift of the westerly trough, the mid-low shear line and the mesoscale front of the boundary layer in the dry northwest. The jet stream is also an important system for the development of this strong convective weather. In the case of weak water vapor and energy conditions, if there is strong dynamic uplift, vertical wind shear and large temperature differences, strong convection can still occur;the convection occurrence area corresponds to the high potential vorticity abnormal area. The movement speed and direction of the cloud cluster are also consistent with the movement of the high potential vorticity anomaly area;the potential vorticity anomaly will cause the cyclonic circulation to increase, and the upward movement will also increase, which is conducive to the development of strong convective weather. According to the position of the dew point front in the β mesoscale, the ground cold pool corresponds to the small value area of the convective cloud cluster TBB. The front of the cold pool is accompanied by a mesoscale ground convergence line, and the uplift is strengthened, which is conducive to the development and forward movement of thunderstorms;the outflow of the cold pool is guided by 700 hPa. When the wind direction is the same, the movement speed will increase, and the stronger the outflow, the faster the movement speed.

Study on a Mesoscale Convective Vortex Causing Heavy Rainfall during the Mei-yu Season in 2003

The strong heavy rainfall on 3–5 July 2003 causing the severe flooding in Huaihe River basin （HRB）, China is studied. It is noted that there are sometimes mesoscale convective vortex （MCV） in East Asia during the mei-yu season. Simulation results from the ARPS （Advanced Regional Prediction） data analysis system （ADAS） and WRF model were used to study the development of the mesoscale convective system （MCS） and mesoscale convective vortex （MCV）. It is confirmed that the MCV formed during the development of a previous severe MCS. A closed vortex circulation can be found below 600 hPa with a vorticity maximum in the middle troposphere. The evolution process of the MCV can be divided into three stages： initiation, maturation, and dissipation. During the mature stage of the MCV, a downdraft occurred in the center of the MCV and new convection developed in southeast of the MCV. The convergence and the tilting in the lower troposphere convergence and vertical advection in the middle troposphere were the main vorticity sources in the MCV initiation stage. Finally, a conceptual model between the mei-yu front and the embedded MCS and MCV is proposed. The mei-yu front was the background condition for the development of the MCS and MCV. A low level jet （LLJ） transported moisture and the weak cold air invasion via a trough aloft in the middle troposphere and triggering the severe convection. Furthermore, the intensified jet was able to result in the initiation of new ＂secondary＂ areas of convection in the eastern part of the MCV.

Organizational Modes of Severe Wind-producing Convective Systems over North China

Severe weather reports and composite radar reflectivity data from 2010-14 over North China were used to analyze the distribution of severe convective wind（SCW） events and their organizational modes of radar reflectivity. The six organizational modes for SCW events（and their proportions） were cluster cells（35.4%）, squall lines（18.4%）, nonlinear-shaped systems（17.8%）, broken lines（11.6%）, individual cells（1.2%）, and bow echoes（0.5%）. The peak month for both squall lines and broken lines was June, whereas it was July for the other four modes. The highest numbers of SCW events were over the mountains, which were generally associated with disorganized systems of cluster cells. In contrast, SCW associated with linear systems occurred mainly over the plains, where stations recorded an average of less than one SCW event per year. Regions with a high frequency of SCW associated with nonlinear-shaped systems also experienced many SCW events associated with squall lines. Values of convective available potential energy, precipitable water, 0-3-km shear, and 0-6-km shear, were demonstrably larger over the plains than over the mountains, which had an evident effect on the organizational modes of SCW events. Therefore, topography may be an important factor in the organizational modes for SCW events over North China.