Elastic twisting metamaterial for perfect longitudinal-torsional wave mode conversion

In this work,we design a twisting metamaterial for longitudinal-torsional(L-T)mode conversion in pipes through exploring the theory of perfect transmodal FabryPerot interference(TFPI).Assuming that the axial and radial motions in pipes can be decoupled,we find that the metamaterial can be designed in a rectangular coordinate system,which is much more convenient than that in a cylindrical system.Numerical calculation with detailed microstructures shows that an efficient L-T mode conversion can be obtained in pipes with different radii.In addition,we fabricate mode-converting microstructures on an aluminum pipe and conduct ultrasonic experiments,and the results are in good agreement with the numerical calculations.We expect that the proposed LT mode-converting metamaterial and its design methodology can be applied in various ultrasonic devices.

CFD calculations on the unsteady aerodynamic characteristics of a tilt-rotor in a conversion mode

In order to calculate the unsteady aerodynamic characteristics of a tilt-rotor in a conver- sion mode, a virtual blade model （VBM） and an real blade model （RBM） are established respec- tively. A new multi-layer moving-embedded grid technique is proposed to reduce the numerical dissipation of the tilt-rotor wake in a conversion mode. In this method, a grid system generated abound the rotor accounts for rigid blade motions, and a new searching scheme named adaptive inverse map （AIM） is established to search corresponding donor elements in the present moving- embedded grid system to translate information among the different computational zones. A dual-time method is employed to fulfill unsteady calculations on the flowfield of the tilt-rotor, and a second-order centered difference scheme considering artificial viscosity is used to calculate the flux. In order to improve the computing efficiency, the single program multiple data （SPMD） model parallel acceleration technology is adopted, according to the characteristic of the current grid system. The lift and drag coefficients of an NACA0012 airfoil, the dynamic pressure distributions below a typical rotor plane, and the sectional pressure distributions on a three-bladed Branum- Tung tilt-rotor in hover flight are calculated respectively, and the present VBM and RBM are val- idated by comparing the calculated results with available experimental data. Then, unsteady aero- dynamic forces and flowfields of an XV-15 tilt-rotor in different modes, such as a fixed conversion mode at different tilt angles （15°, 30°, 60°） and a whole conversion mode which converses from 0° to 90°, are numerically simulated by the VBM and RBM respectively. By analyses and comparisons on the simulated results of unsteady aerodynamic forces of the tilt-rotor in different modes, some meaningful conclusions about distorted blade-tip vortex distribution and unsteady aerodynamic force variation in a conversion mode are obtained, and these investigation results could provide a good foundation for tilt-rotor aircraft design in the future.

Realizing mode conversion and optical diode effect by coupling photonic crystal waveguides with cavity

We propose a novel two-dimensional photonic crystal structure consisting of two line defect waveguides and a cavity to realize mode conversion based on the coupling effect. The W1/cavity/W2 structure breaks the spatial symmetry and successfully converts the even（odd） mode to the odd（even） mode in the W2 waveguide during the forward（backward）transmission. When considering the incidence of only the even mode, the optical diode effect emerges and achieves approximate 35 d B unidirectionality at the resonant frequency. Moreover, owing to the narrow bandpass feature and the flexibility of the tuning cavity, utilization of the proposed structure as a wavelength filter is demonstrated in a device with a Y-branch splitter. Here, we provide a heuristic design for a mode converter, optical diode, and wavelength filter derived from the coupling effect between a cavity and adjacent waveguides, and expect that the proposed structure can be applied as a building block in future all-optical integrated circuits.

Numerical Research of Mode Conversion in an Inhomogeneous Plasma

The linear mode conversion of electromagnetic waves in the hot, unmagnetized inhomogeneous plasma is studied numerically for different density profiles, and the dependence of the absorption coefficient on the incident angles and the wave frequencies are obtained for different electrons＇ temperature. The results show that the shapes of the density profiles and the electron＇s temperature create a certain effect on the coefficients of absorption, which reaches its peak value （about 50%） for appropriate parameters. Effective absorption occurs in a limited range of parameter q.

Influence of mode conversions in the skull on transcranial focused ultrasound and temperature fields utilizing the wave field separation method： A numerical study

Transcranial focused ultrasound is a booming noninvasive therapy for brain stimuli. The Kelvin–Voigt equations are employed to calculate the sound field created by focusing a 256-element planar phased array through a monkey skull with the time-reversal method. Mode conversions between compressional and shear waves exist in the skull. Therefore, the wave field separation method is introduced to calculate the contributions of the two waves to the acoustic intensity and the heat source, respectively. The Pennes equation is used to depict the temperature field induced by ultrasound. Five computational models with the same incident angle of 0？and different distances from the focus for the skull and three computational models at different incident angles and the same distance from the focus for the skull are studied. Numerical results indicate that for all computational models, the acoustic intensity at the focus with mode conversions is 12.05%less than that without mode conversions on average. For the temperature rise, this percentage is 12.02%. Besides, an underestimation of both the acoustic intensity and the temperature rise in the skull tends to occur if mode conversions are ignored. However, if the incident angle exceeds 30？, the rules of the over-and under-estimation may be reversed. Moreover,shear waves contribute 20.54% of the acoustic intensity and 20.74% of the temperature rise in the skull on average for all computational models. The percentage of the temperature rise in the skull from shear waves declines with the increase of the duration of the ultrasound.

Experimental Investigation of Multi-Mode Vortex-Induced Vibration of Flexible Risers with Different Mass Ratios

Experiments were conducted on risers with different mass ratios to study the effect of mode conversion and spanwise correlation. The slenderness ratio of the riser model was set as 169, and the Reynolds numbers are 1600-14400. The dynamic responses of riser models versus reduced velocity were analyzed, and the spanwise displacement, frequency,and trajectory of the mode conversion from the lower to the higher mode were explored. The results revealed that the riser model with a higher mass ratio excites a higher number of modes. The conversion region of multi-mode competition exists and narrows with the increasing mass ratio. Mode conversion is continuous and manifests as the transmission of peaks and troughs in mode shape: the peaks and troughs of mode shape move up in the mode stable development region and move down in the mode conversion region. The single-mode dominating vibration exhibits a standing wave feature, and the traveling wave feature is significant in the mode conversion region. Furthermore, the frequency jump is always transmitted from the trough to the peak of the mode shape, and finally, all the axial positions vibrate at the same frequency. The trajectory in the mode conversion region deviates from the 8-shape and recovers the standard8-shape at the middle and late stages of the mode stable development region.

HG-LG Mode Conversion with Stressed 3-Mode Fibers under Polarization

We have coupled an upright HG mode into a fiber-optic waveguide and used the application of stress to generate a Laguerre-Gaussian laser mode. We have generalized previous results by McGloin et al. by using a polarized input beam, a true 3-mode fiber and by applying the stress on a stripped piece of the optical waveguide. These generalizations are necessary in order to perform quantum information experiments and obtain reliable information on the stress imposed on the optical fiber.

Multi-Mode Guided Waves Based Reference-Free Damage Diagnostic Imaging in Plates

Probability-based diagnostic imaging(PDI)is one of the most well-known damage identification methods using guided waves.It is usually applied to diagnose damage in plates.The previous studies were dependent on the certain damage index(DI)which is always calculated from the guided wave signals.In conventional methods,DI is simply defined by comparing the real-time data with the baseline data as reference.However,the baseline signal is easily affected by varying environmental conditions of structures.In this paper,a reference-free diagnostic imaging method is developed to avoid the influence of environmental factors,such as temperature and load conditions.The DI is defined based on the mode conversion of multi-mode guided waves with realtime signals without baseline signals.To improve the accuracy of diagnosis,two terms are included in the reference-free DI.One is called energy DI,which is defined based on the feature of signal energy.The other is called correlation DI and is defined based on the correlation coefficient.Then the PDI algorithm can be carried out instantaneously according to the reference-free DI.The real-time signals which are used to calculate DI are collected by the piezoelectric lead zirconate titanate(PZT)transducers placed on both sides of a plate.The numerical simulations by the finite element(FE)method on aluminum plates with PZT arrays are performed to validate the effectiveness of the reference-free damage diagnostic imaging.The approach is validated by two different arrays:a circle network and a square network.The results of diagnostic imaging are demonstrated and discussed in this paper.Furthermore,the advantage of reference-free DI is investigated by comparing the accuracy of defined reference-free DI and energy DI.

Response characteristics of drill-string guided wave in downhole acoustic telemetry

Modeling of a drill-string acoustic channel has been an important topic in downhole telemetry for a long time.The propagation of drill-string guided waves in the borehole contains excitation,attenuation,and mode conversion issues that have not been considered by existing modeling methods.In this article,we formulate a hybrid modeling method to investigate the response characteristics of a fundamental-mode drill-string wave in various borehole environments.This hybrid method provides channel functions,including transmitting and receiving deployments,periodicity of the structure,and formation property changes.The essential physics of the drill-string wave propagation is captured with a one-dimensional model.The analytical solutions of the wavefield in multilayered cylindrical structures are introduced into a propagation matrix to express drill-string-wave interactions with the borehole environments.The effectiveness of the proposed method is confirmed through comparison with the finite-difference method.In addition,by designing numerical models,we investigate the conversion effect of the drill-string wave at the tool joint.We demonstrate that the conversion intensity of the drill-string wave is positively correlated not only with the cross-sectional area of the tool joint but also with the wave impedance of the outer formation.Hard formation outside the borehole reduces the energy leakage while intensifying the conversion of drill-string waves to Stoneley waves,and the opposite is true for the drill string in an infinite fluid.The converted Stoneley waves interfere with the drill-string waves,resulting in variations of bandgap distribution,which challenges the reliability of the data transmission.

Numerical simulation of ultrashort-pulse reflectometry(USPR)on EAST

The microwave reflectometer is a popular non-intrusive plasma density diagnostic instrument on tokamaks that provides centimeter and millisecond level resolution.The ultrashort-pulse reflectometer(USPR)achieves plasma density measurement by emitting a chirped wave containing a broadband signal and measuring the time of flight from different frequency components.A USPR system is currently being built on EAST(Experimental Advanced Superconducting Tokamak)to meet the needs of diagnostic of the pedestal density evolution,such as high-frequency small edge-localized modes.In order to predict the density reconstruction of the EAST USPR system,this work presents a numerical simulation study of the beam propagation of the chirped wave of extraordinary waves(X-mode)in the plasma based on Python.The electron density profile has been successfully reconstructed by the reflection signal interpretation.The small gap between the right-hand cut-off layer and the electron cyclotron resonance layer,due to the low plasma density on the plasma edge,causes unexpected leakage from the transmitting microwave beam to the pedestal and the core region.This kind of‘tunneling’effect will cause the reflected signal to have energy loss in the low-frequency band.The study also discusses the influence of the poloidal magnetic field on the reflected signal.The spatial variation of the poloidal magnetic field will lead to the conversion between extraordinary(X)waves and ordinary(O)waves,which leads to energy loss in the reflected signals.The simulation results show that the‘tunneling’effect and the O-X mode conversion effect have little effect on the EAST USPR system.Therefore,the currently designed transmit power meets the working requirements.

Photonic lattice-like waveguides in glass directly written by femtosecond laser for on-chip mode conversion

We report on a conceptually new type of waveguide in glass by femtosecond laser direct writing,namely,photonic latticelike waveguide(PLLW).The PLLWfs core consists of well-distributed and densified tracks with a sub-micron size of 0.62μm in width.Specifically,a PLLW inscribed as hexagonal-shape input with a ring-shape output side was implemented to converse Gaussian mode to doughnut-like mode,and high conversion efficiency was obtained with a low insertion loss of 1.65 dB at 976 nm.This work provides a new freedom for design and fabrication of the refractive index profile of waveguides with sub-micron resolution and broadens the functionalities and application scenarios of femtosecond laser direct-writing waveguides in future 3D integrated photonic systems.

Crack Detection in Pipes with Different Bend Angles Based on Ultrasonic Guided Wave

Pipeline plays an indispensable role in process industries,because the progressing crack-like defects of in it may result in serious accidents and significant economic losses.Therefore,it is essential to detect the cracks occurred in pipelines.The axial crack-like defects in elbows with different angle are inspected by using the T(0,1)mode guided waves,in which different configurations including 45°,90°,135°and 180°(straight pipe)are considered respectively.Firstly,the detection sensitivity for different defect location is experimentally investigated.After that,finite element simulation is used to explore the propagation behaviors of T(0,1)mode in different bend structures.Simulation and experiment results show that the crack in different areas of the elbow can affect the detection sensitivity.It can be found that the detection sensitivity of crack in the middle area of the elbow is higher compared to the extrados and intrados of the elbow.Finally,the mode conversion is also investigated when the T(0,1)crosses the bend,and the results show that bend is a key factor to the mode conversion phenomenon which presents between the T(0,1)mode and F(1,2)mode.

Effect of negative permeability on elastic wave propagation in magnetoelastic multilayered composites

With the advent of left-handed magnetic materials, it is desirable to develop high-performance wave devices based on their novel properties of wave propagation. This letter reports the special properties of elastic wave propagation in magnetoelastic multilayered composites with negative permeability as compared to those in counterpart structures with positive permeability. These novel properties of elastic waves are discerned from the diversified dispersion curves, which represent the propagation and attenuation characteristics of elastic waves. To compute these dispersion curves, the method of reverberation-ray matrix is extended for the analysis of elastic waves in magnetoelastic multilayered composites. Although only the results of a single piezomagnetic and a binary magnetoelastic layers with mechanically free and magnetically short surfaces as well as perfect interface are illustrated in the numerical examples, the analysis is applicable to magnetoelastic multilayered structures with other kinds of boundaries/interfaces.

Optical Wavelength Filter Using Mode Conversion in Multimode Waveguide

A wavelength filter with simple structure using multimode waveguide is proposed. The device uses mode conversion by a grating structure fabricated simultaneously with the multimode waveguide.

Study of High Power ICRF Antenna Design in LHD

In large helical device （LHD）, antenna loadings are different for minority ion cyclotron heating （MICH with 38.47 MHz） and mode-converted ion Bernstein wave heating （MC-IBW with 28.4 MHz）, and it is necessary to improve antenna loading with low heating efficiency to avoid arching on transmission line. To design a new ion cyclotron range of frequencies （ICRF） antenna in LHD, calculation for a simple antenna model is conducted using three-dimensional electrical magnetic code （high frequency structure simulator, HFSS） for an water loading as an imaginary plasma with low heating efficiency. At resonant frequencies, antenna loading is sensitive to strap width, and resonant frequencies are strongly related to strap height. There is no differences of RF current profile on the strap surface between resonant frequency and non-resonant frequency. The strap should be perpendicularly placed against the magnetic field line, since Faraday-shield angle will lead to a decrease in the effective antenna height.

Particle simulations on propagation and resonance of lower hybrid wave launched by phased array antenna in linear devices

In this work, we performed first-principles electromagnetic-kinetic simulations to study a phased antenna array and its interaction with deuterium plasmas within the lower hybrid range of frequency. We first gave wave accessibility and resonance results, which agree well with theoretical prediction. In addition, we further investigated the antenna power spectrum with different antenna phases in the presence of the plasma and compared it with that in a vacuum,which directly indicates wave coupling and plasma absorption. Furthermore, for the case with zero phasing difference, our simulation results show that, albeit the launch is away from the accessibility region, tunneling effect and mode conversion occurred, which enhanced coupling and absorption. Moreover, consistent interactions between the injected wave and the plasma concerning various antenna phase differences are shown. We presented the inchoate response of the plasma in terms of the launching directions. Our results could be favorable for the engineering design of wave heating experiments with a tunable phased antenna array in linear devices, such as simple magnetic mirrors or tandem mirrors.

Asymmetric nonlinear-mode-conversion in an optical waveguide with PT symmetry

Asymmetric mode transformation in waveguide is of great significance for on-chip integrated devices with one-way effect,while it is challenging to achieve asymmetric nonlinear-mode-conversion(NMC)due to the limitations imposed by phase-matching.In this work,we theoretically proposed a new scheme for realizing asymmetric NMC by combining frequencydoubling process and periodic PT symmetric modulation in an optical waveguide.By engineering the one-way momentum from PT symmetric modulation,we have demonstrated the unidirectional conversion from pump to second harmonic with desired guided modes.Our findings offer new opportunities for manipulating nonlinear optical fields with PT symmetry,which could further boost more exploration on on-chip nonlinear devices assisted by non-Hermitian optics.

Simulation of a helicon plasma source in a magnetoplasma rocket engine

The helicon plasma source,which generates high thrust and high impulse,is of vital importance for magnetoplasma rocket engines.In this work,a multi-component,two-dimensional,axisymmetric fluid model coupled with an electromagnetic field was developed to model the helicon discharge.The simulation results demonstrate that:(i)the discharge mode changes twice—each conversion is accompanied by a plasma density jump and an electron temperature peak in the discharge;(ii)when the input current increases,the plasma density increases,and ionization occurs faster;(iii)the background magnetic field clearly enhances the discharge;(iv)the plasma density may be smaller if the discharge has not entered the wave mode.

A compact dual-band radiation system

Complex magnetically insulated transmission line oscillator(MILO),as an important development direction,can enhance the power efficiency and generate dual-band high power microwaves(HPMs).A complex MILO and a preliminary dual-band radiation system have been proposed in our previous studies.However,the axial length of the dual-band radiation system is too long to meet the compact requirements.In this paper,a compact dual-band radiation system is presented and investigated numerically.The compact dual-band radiation system comprises a dual-band cross-shaped mode converter and a dual-band coaxial conical horn antenna.It can convert two coaxial TEM mode microwaves(1.717 GHz and 4.167 GHz)generated by the complex MILO into the coaxial TE11 mode microwaves,and then radiate them into the air.At 1.717 GHz,the gain of the antenna is 17.9 dB,and the total return loss and diffraction loss are 1.50%and 0,respectively.At 4.167 GHz,the gain is 19.4 dB,and the total return loss and diffraction loss are 1.17%and 0.78%,respectively.The power handling capacity of the antenna is 5.1 GW at 1.717 GHz and 2.0 GW at 4.167 GHz.Comparing with the original structure,the length of the dual-band radiation system is reduced by 45.2%.

C-band fundamental/first-order mode converter based on multimode interference coupler on InP substrate

The design, fabrication and characterization of a fundamental/first-order mode converter based on mul- timode interference coupler on InP substrate were reported. Detailed optimization of the device parameters were investigated using 3D beam propagation method. In the experiments, the fabricated mode converter realized mode conversion from the fundamental mode to the first-order mode in the wavelength range of 1530-1565 nm with ex- cess loss less than 3 dB. Moreover, LPol and LP11 fiber modes were successfully excited from a few-mode fiber by using the device. This InP-based mode converter can be a possible candidate for integrated transceivers for future mode-division multiplexing system.