Environmental requirements world wide and in the P.R.of China in particular have increased and authorities are increasing the pressure on steelmakers to comply with always more stringent limits and standards. Modern c...Environmental requirements world wide and in the P.R.of China in particular have increased and authorities are increasing the pressure on steelmakers to comply with always more stringent limits and standards. Modern converter steel making goes along with the innovation and new developments not only for the primary converter process itself but even more for the dedusting technologies.This paper describes the benefits and latest development of advanced off gas cleaning and recovery systems based on dry type cleaning with electrostatic precipitation and wet type gas cleaning based on wet scrubbers.Modern converter dedusting is based on suppressed combustion systems in order to reduce off gas amounts and to be able to use the gas for gas recovery.The dry type primary off gas treatment system based on electrostatic precipitator technology is the most advanced environmental solution available for converter steel making.Dry dedusting has been introduced in China successfully with a significant contribution by Siemens VAI being the market leader for converter dry dedusting systems.Siemens VAI has introduced several design improvements over the last years such as CFD modeling of flow conditions in evaporation cooler,design of chains for dust conveyors,design of ESP inlet,design and thickness of discharge electrodes and operation in energy saving mode.Additionally the DDS process has been successfully implemented in China for the De-P process.The gas recovery system for DDS has been optimized over the years with high quality equipment and integrated automation and control systems.Wet type dedusting for converter gas is a well proven technology for many years and is still widely used due to the simplicity of the process and the lower investment costs.SVAI has continuously improved it's wet dedusting technologies to provide highly energy efficient systems which can achieve lowest levels of clean gas dust while still maintaining a moderate water and energy consumption with simplified process control and standardized process control packages.Main design and process improvements include expansion joints for connection of scrubber to cooling stack,new type of droplet separator,advanced hood pressure control package,ID fan washing system,ID fan speed control system etc.The focus for wet type gas recovery systems is still on maximum safety and reliability.SVAI has also successfully improved the technological packages for converter gas recovery for wet type dedusting systems.The comparison between the two system shows the advantages of dry dedusting mainly being the lowest clean gas dust content, lower operating costs,easier handling for recycling of residuals and no need for a water treatment plants.Wet type dedusting has it's main advantages in the simple process and operation of the system,the flexible layout solutions inside the steel shop as well as generally lower investment costs.An overview on the numerous reference installations for dry- and wet type dedusting systems in China as well as world wide is given.展开更多
Drying technology of angiotensin converting enzyme (ACE) inhibitory peptides derived from bovine casein was investigated. No significance was observed on ACE inhibitory activity of products prepared by spay drying a...Drying technology of angiotensin converting enzyme (ACE) inhibitory peptides derived from bovine casein was investigated. No significance was observed on ACE inhibitory activity of products prepared by spay drying and freeze drying (P〉0.05). Spay drying was the best drying process for practical industry production. The inlet temperature ranged from 140℃ to 160℃ and the exit temperature ranged from 70 ℃ to 90 ℃ during the spay drying process. Under the optimal conditions, scale-up of angiotensin converted enzyme inhibitory peptide from 1 L to 10 L and the experiment was successively conducted. Peptide yield was 29% and half inhibitory concentration (IC50) was 0.53 g. L^-1.展开更多
Saffron is the most precious and expensive agricultural product. A dehydration treatment is necessary to convert Crocus sativus L. stigmas into saffron spice. To the best of our knowledge, no information on mass trans...Saffron is the most precious and expensive agricultural product. A dehydration treatment is necessary to convert Crocus sativus L. stigmas into saffron spice. To the best of our knowledge, no information on mass transfer parameters of saffron stigmas is available in the literature. This study aimed at investigating the moisture transfer parameters and quality attributes of saffron stigmas under infrared treatment at different temperatures(60,70, …, 110 ℃). It was observed that the dehydration process of the samples occurred in a short accelerating rate period at the start followed by a falling rate period. The effective moisture diffusivity and convective mass transfer coefficient were determined by using the Dincer and Dost model. The diffusivity values varied from1.1103 × 10^-10m^2·s^-1to 4.1397 × 10^-10m^2·s^-1 and mass transfer coefficient varied in the range of 2.6433 × 10^-7–8.7203 × 10^-7m·s^-1. The activation energy was obtained to be 27.86 kJ·mol^-1. The quality assessment results showed that the total crocin content increased, when the temperature increased up to90 ℃ but, in higher temperatures, the amount of crocin decreased slightly. The total safranal content of the samples decreased slightly when drying temperature increased from 60 ℃ to 70 ℃ and then continuously increased up to 110 ℃. Also, the amount of picrocrocin increased from 83.1 to 93.3 as the drying temperature increased from 60 ℃ to 100 ℃.展开更多
文摘Environmental requirements world wide and in the P.R.of China in particular have increased and authorities are increasing the pressure on steelmakers to comply with always more stringent limits and standards. Modern converter steel making goes along with the innovation and new developments not only for the primary converter process itself but even more for the dedusting technologies.This paper describes the benefits and latest development of advanced off gas cleaning and recovery systems based on dry type cleaning with electrostatic precipitation and wet type gas cleaning based on wet scrubbers.Modern converter dedusting is based on suppressed combustion systems in order to reduce off gas amounts and to be able to use the gas for gas recovery.The dry type primary off gas treatment system based on electrostatic precipitator technology is the most advanced environmental solution available for converter steel making.Dry dedusting has been introduced in China successfully with a significant contribution by Siemens VAI being the market leader for converter dry dedusting systems.Siemens VAI has introduced several design improvements over the last years such as CFD modeling of flow conditions in evaporation cooler,design of chains for dust conveyors,design of ESP inlet,design and thickness of discharge electrodes and operation in energy saving mode.Additionally the DDS process has been successfully implemented in China for the De-P process.The gas recovery system for DDS has been optimized over the years with high quality equipment and integrated automation and control systems.Wet type dedusting for converter gas is a well proven technology for many years and is still widely used due to the simplicity of the process and the lower investment costs.SVAI has continuously improved it's wet dedusting technologies to provide highly energy efficient systems which can achieve lowest levels of clean gas dust while still maintaining a moderate water and energy consumption with simplified process control and standardized process control packages.Main design and process improvements include expansion joints for connection of scrubber to cooling stack,new type of droplet separator,advanced hood pressure control package,ID fan washing system,ID fan speed control system etc.The focus for wet type gas recovery systems is still on maximum safety and reliability.SVAI has also successfully improved the technological packages for converter gas recovery for wet type dedusting systems.The comparison between the two system shows the advantages of dry dedusting mainly being the lowest clean gas dust content, lower operating costs,easier handling for recycling of residuals and no need for a water treatment plants.Wet type dedusting has it's main advantages in the simple process and operation of the system,the flexible layout solutions inside the steel shop as well as generally lower investment costs.An overview on the numerous reference installations for dry- and wet type dedusting systems in China as well as world wide is given.
基金Supported by Scientific Research Foundation for Young Scholars of Heilongjiang Province of China (QC07C25)The National High Technology Research and Development Program of China (2008AA10Z315)
文摘Drying technology of angiotensin converting enzyme (ACE) inhibitory peptides derived from bovine casein was investigated. No significance was observed on ACE inhibitory activity of products prepared by spay drying and freeze drying (P〉0.05). Spay drying was the best drying process for practical industry production. The inlet temperature ranged from 140℃ to 160℃ and the exit temperature ranged from 70 ℃ to 90 ℃ during the spay drying process. Under the optimal conditions, scale-up of angiotensin converted enzyme inhibitory peptide from 1 L to 10 L and the experiment was successively conducted. Peptide yield was 29% and half inhibitory concentration (IC50) was 0.53 g. L^-1.
文摘Saffron is the most precious and expensive agricultural product. A dehydration treatment is necessary to convert Crocus sativus L. stigmas into saffron spice. To the best of our knowledge, no information on mass transfer parameters of saffron stigmas is available in the literature. This study aimed at investigating the moisture transfer parameters and quality attributes of saffron stigmas under infrared treatment at different temperatures(60,70, …, 110 ℃). It was observed that the dehydration process of the samples occurred in a short accelerating rate period at the start followed by a falling rate period. The effective moisture diffusivity and convective mass transfer coefficient were determined by using the Dincer and Dost model. The diffusivity values varied from1.1103 × 10^-10m^2·s^-1to 4.1397 × 10^-10m^2·s^-1 and mass transfer coefficient varied in the range of 2.6433 × 10^-7–8.7203 × 10^-7m·s^-1. The activation energy was obtained to be 27.86 kJ·mol^-1. The quality assessment results showed that the total crocin content increased, when the temperature increased up to90 ℃ but, in higher temperatures, the amount of crocin decreased slightly. The total safranal content of the samples decreased slightly when drying temperature increased from 60 ℃ to 70 ℃ and then continuously increased up to 110 ℃. Also, the amount of picrocrocin increased from 83.1 to 93.3 as the drying temperature increased from 60 ℃ to 100 ℃.