By means of the computational fluid dynamics software Fluent 6.3, a mathematical model of three-dimensional three-phase fluid flow field in the molten bath of electric arc furnace （EAF） with side accessorial oxygen ...By means of the computational fluid dynamics software Fluent 6.3, a mathematical model of three-dimensional three-phase fluid flow field in the molten bath of electric arc furnace （EAF） with side accessorial oxygen lances was developed to study the transient phenomena of oxygen jet impingement on the molten steel and the molten slag. The water modeling experiment was carried out to verify the simulation results. The impingement of the supersonic oxygen jet caused impact dent on the molten steel surface accordingly. The area of impact dent changed almost in linear relationship to flow rate of oxygen jet, which can be expressed by a deduced mathematical equation. And the relationship between the impact force of oxygen iet and the correspondingly formed apparent static pressure on molten bath was obtained, which was in linear relationship and a direct proportion, and can also be expressed by a deduced mathematical equation.展开更多
The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author wi...The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author with his research group have been summarized. Water modeling was used to investigate the fluid flow and mixing characteristics in the bath of an 18 t AOD vessel, as well as the 'back attack' action of gas jets and its effects on the erosion and wear of the refractory lining, with sufficiently full kinematic similarity. The non rotating and rotating gas jets blown through two annular tuyeres, respectively of straight tube and spiral flat tube type, were employed in the experiments. The geometric similarity ratio between the model and its prototype (including the straight tube type tuyeres) was 1:3. The influences of the gas flow rate, the angle included between the two tuyeres and other operating parameters, and the suitability of the spiral tuyere as a practical application, were examined. These latest studies have clearly and successfully brought to light the fluid flow and mixing characteristics in the bath and the overall features of the back attack phenomena of gas jets during the blowing, and have offered a better understanding of the refining process. Besides, mathematical modeling for the refining process of stainless steel was carried out and a new mathematical model of the process was proposed and developed. The model performs the rate calculations of the refining and the mass and heat balances of the system. Also, the effects of the operating factors, including adding the slag materials, crop ends, and scrap, and alloy agents; the non isothermal conditions; the changes in the amounts of metal and slag during the refining; and other factors were all considered. The model was used to deal with and analyze the austenitic stainless steel making (including ultra low carbon steel) and was tested on data of 32 heats obtained in producing 304 grade steel in an 18 t AOD vessel. The changes in the bath composition and temperature during the refining process with time can be accurately predicted using this model. The model can provide some very useful information and a reliable basis for optimizing the process practice of the refining of stainless steel and control of the process in real time and online.展开更多
基金Sponsored by National Key Technology Research and Development Program in 11th Five-year Plan of China(2008AF33B01)Fuzhou University Foundation for Development of Science and Technology of China(0020-600588)
文摘By means of the computational fluid dynamics software Fluent 6.3, a mathematical model of three-dimensional three-phase fluid flow field in the molten bath of electric arc furnace （EAF） with side accessorial oxygen lances was developed to study the transient phenomena of oxygen jet impingement on the molten steel and the molten slag. The water modeling experiment was carried out to verify the simulation results. The impingement of the supersonic oxygen jet caused impact dent on the molten steel surface accordingly. The area of impact dent changed almost in linear relationship to flow rate of oxygen jet, which can be expressed by a deduced mathematical equation. And the relationship between the impact force of oxygen iet and the correspondingly formed apparent static pressure on molten bath was obtained, which was in linear relationship and a direct proportion, and can also be expressed by a deduced mathematical equation.
文摘The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author with his research group have been summarized. Water modeling was used to investigate the fluid flow and mixing characteristics in the bath of an 18 t AOD vessel, as well as the 'back attack' action of gas jets and its effects on the erosion and wear of the refractory lining, with sufficiently full kinematic similarity. The non rotating and rotating gas jets blown through two annular tuyeres, respectively of straight tube and spiral flat tube type, were employed in the experiments. The geometric similarity ratio between the model and its prototype (including the straight tube type tuyeres) was 1:3. The influences of the gas flow rate, the angle included between the two tuyeres and other operating parameters, and the suitability of the spiral tuyere as a practical application, were examined. These latest studies have clearly and successfully brought to light the fluid flow and mixing characteristics in the bath and the overall features of the back attack phenomena of gas jets during the blowing, and have offered a better understanding of the refining process. Besides, mathematical modeling for the refining process of stainless steel was carried out and a new mathematical model of the process was proposed and developed. The model performs the rate calculations of the refining and the mass and heat balances of the system. Also, the effects of the operating factors, including adding the slag materials, crop ends, and scrap, and alloy agents; the non isothermal conditions; the changes in the amounts of metal and slag during the refining; and other factors were all considered. The model was used to deal with and analyze the austenitic stainless steel making (including ultra low carbon steel) and was tested on data of 32 heats obtained in producing 304 grade steel in an 18 t AOD vessel. The changes in the bath composition and temperature during the refining process with time can be accurately predicted using this model. The model can provide some very useful information and a reliable basis for optimizing the process practice of the refining of stainless steel and control of the process in real time and online.
