A coupled thermo-mechanical peridynamic model for fracture behavior of granite subjected to heating and water-cooling processes

Thermal damage and thermal fracture of rocks are two important indicators in geothermal mining projects.This paper investigates the effects of heating and water-cooling on granite specimens at various temperatures.The laboratory uniaxial compression experiments were also conducted.Then,a coupled thermo-mechanical ordinary state-based peridynamic(OSB-PD)model and corresponding numerical scheme were developed to simulate the damage of rocks after the heating and cooling processes,and the change of crack evolution process was predicted.The results demonstrate that elevated heating temperatures exacerbate the thermal damage to the specimens,resulting in a decrease in peak strength and an increase in ductility of granite.The escalating occurrence of thermal-induced cracks significantly affects the crack evolution process during the loading phase.The numerical results accurately reproduce the damage and fracture characteristics of the granite under different final heating temperatures(FHTs),which are consistent with the test results in terms of strength,crack evolution process,and failure mode.

Design and analysis of a high loss density motor cooling system with water cold plates

Aiming at reducing the difficulty of cooling the interior of high-density motors,this study proposed the placement of a water cold plate cooling structure between the axial laminations of the motor stator.The effect of the cooling water flow,thickness of the plate,and motor loss density on the cooling effect of the water cold plate were studied.To compare the cooling performance of water cold plate and outer spiral water jacket cooling structures,a high-speed permanent magnet motor with a high loss density was used to establish two motor models with the two cooling structures.Consequently,the cooling effects of the two models were analyzed using the finite element method under the same loss density,coolant flow,and main dimensions.The results were as follows.(1)The maximum and average temperatures of the water cold plate structure were reduced by 25.5%and 30.5%,respectively,compared to that of the outer spiral water jacket motor;(2)Compared with the outer spiral water jacket structure,the water cold plate structure can reduce the overall mass and volume of the motor.Considering a 100 kW high-speed permanent magnet motor as an example,a water cold plate cooling system was designed,and the temperature distribution is analyzed,with the result indicating that the cooling structure satisfied the cooling requirements of the high loss density motor.

Cold Damage Risk Assessment of Double Cropping Rice in Hunan, China

Combined with remote sensing data and meteorological data, cold damage risk was assessed for planting area of double cropping rice （DCR） in Hunan Province, China. A new methodology of cold damage risk assessment was built that apply to grid and have clear hazard-affected body. Each station cold damage annual frequency and average annual intensity of cold damage was calculated by using 1951-2010 station daily mean temperature and simple cold damage identification index. On this basis, average annual cold damage risk index was obtained by their product. The spatial analysis models of cold damage risk index about double-season early rice （DSER） and double-season later rice （DSLR） were established respectively by the relation of average annual cold damage risk index and its geographic factors. Critical threshold of level of average annual cold damage risk index for DSER and DSLR were respectively divided by the correlative equation of cold damage annual frequency and average annual intensity of cold damage. 2001-2010 planting area of DCR, acquired by time series analysis of MOD09AI 8-d composite land surface reflectance product, was as target of assessment. The results show average annual intensity of cold damage is exponential function of cold damage annual frequency, average annual cold damage risk index is directly proportional to cold damage cumulant and cold damage annual frequency, and is inversely proportional to happen times of cold damage and the square of statistical time sequence length. Cold damage risk of DSER is higher than DSLR in Hunan Province. In the 10-yr stacking map, DCR planting in low risk area accounted for 11.92% of total extraction area, in moderate risk area accounted for 69.62%, in high risk area accounted for 18.46%. According to the cold damage risk assessment result, DCR production can be guided to reduce cold damage losses.

Controlled Rolling and Cooling Process for Low Carbon Cold Forging Steel

Effect of controlled rolling and cooling process on the mechanical properties of low carbon cold forging steel was investigated for different processing parameters of a laboratory hot rolling mill. The results show that the specimens with fast cooling after hot rolling exhibit very good mechanical properties, and the improvement of the mechanical properties can be attributed mainly to the ferrite-grain refinement. The mechanical properties increase with decreasing final cooling temperature within the range from 670 ℃ to 570 ℃ due to the finer interlamellar spacing of pearlite colony. The specimen with fast cooling after low temperature rolling shows the highest values of the mechanical properties. The effect of the ferrite grain size on the mechanical properties was greater than that of pearlite morphology in the present study. The mechanical properties of specimens by controlled rolling and cooling process without thermal treatment were greatly superior to that of the same specimens by the conventional rolling, and their tensile strength reached 490 MPa grade even in the case of low temperature rolling without controlled rolling. It might be expected to realize the substitution medium-carbon by low-carbon for 490 MPa grade cold forging steel with controlled rolling and cooling process.

Unusual coastal ocean cooling in the northern South China Sea by a katabatic cold jet associated with Typhoon Mujigea(2015)

This study deals with a unusual cooling event after Typhoon Mujigea passed over the northern South China Sea(SCS) in October 2015. We analyze the satellite sea surface temperature(SST) time series from October 3 to 18,2015 and find that the cooling process in the coastal ocean had two different stages. The first stage occurred immediately after typhoon passage on October 3, and reached a maximum SST drop of –2℃ on October 7 as the usual cold wake after typhoon. The second stage or the unusual extended cooling event occurred after 7d of the typhoon passage, and lasted for 5d from October 10 to 15. The maximum SST cooling was –4℃ and occurred after 12d of typhoon passage. The mechanism analysis results indicate that after landing and moving northwestward to the Yunnan-Guizhou Plateau(YGP), Typhoon Mujigea(2015) met the westerly wind front on October 5. The lowpressure and positive-vorticity disturbances to the front triggered meridional air flow and low-pressure trough,thus induced a katabatic cold jet downward from the Qinghai-Tibet Plateau(QTP) passing through the YGP to the northwestern SCS. The second cooling reached the maximum SST drop 4d later after the maximum air temperature drop of –9℃ on October 11. The simultaneous air temperature and SST observations at three coastal stations reveal that it is this katabatic cold jet intrusion to lead the unusual SST cooling event.

Field experimental study on the cooling effect of mine cooling system acquiring cold source from return air

With the increase of mining depth, more and deeper coal mines are limited by heat disaster. The cooling energy in deep mine cooling system comes from mine water inrush or ground cooling tower, but we cannot adopt the two methods because mine water inrush in many old coal mines in China is limited. What is more, the cooling pipelines cannot be put in narrow pit-shaft. To settle the problem above, according to the characteristics of Zhangxiaolou Coal Mine, this paper adopts the deep mine return air as the cooling energy for deep mine cooling system. In addition, we carried out cite test to extract cold energy from return air. Through monitoring the water quantity, water temperature of cooling system and air temperature, we got the thermodynamic equilibrium parameters during the cooling energy acquisition analysis and the effect of cooling system that the temperature and humidity on working face are respectively reduced to 8-12 ℃ and 8-15% through cooling. This research offers experimental reference for deep mine cooling which lacks cooling energy.

Roles of Wind Stress and Subsurface Cold Water in the Second-Year Cooling of the 2017/18 La Nina Event

After the strong 2015/16 El Nino event,cold conditions prevailed in the tropical Pacific with the second-year cooling of the 2017/18 La Ni?a event.Many coupled models failed to predict the cold SST anomalies(SSTAs)in 2017.By using the ERA5 and GODAS(Global Ocean Data Assimilation System)products,atmospheric and oceanic factors were examined that could have been responsible for the second-year cooling,including surface wind and the subsurface thermal state.A time sequence is described to demonstrate how the cold SSTAs were produced in the central-eastern equatorial Pacific in late 2017.Since July 2017,easterly anomalies strengthened in the central Pacific;in the meantime,wind stress divergence anomalies emerged in the far eastern region,which strengthened during the following months and propagated westward,contributing to the development of the second-year cooling in 2017.At the subsurface,weak negative temperature anomalies were accompanied by upwelling in the eastern equatorial Pacific,which provided the cold water source for the sea surface.Thereafter,both the cold anomalies and upwelling were enhanced and extended westward in the centraleastern equatorial Pacific.These changes were associated with the seasonally weakened EUC(the Equatorial Undercurrent)and strengthened SEC(the South Equatorial Current),which favored more cold waters being accumulated in the central-equatorial Pacific.Then,the subsurface cold waters stretched upward with the convergence of the horizontal currents and eventually outcropped to the surface.The subsurface-induced SSTAs acted to induce local coupled air–sea interactions,which generated atmospheric–oceanic anomalies developing and evolving into the second-year cooling in the fall of 2017.

Risk Assessment of Maize Cold Damage in Heilongjiang Province in Recent 30 Years

In order to make the relevant risk departments and the agricultural producers have a clearer understanding of maize cold damage, the data of daily average temperature of 83 meteorological stations in Heilongjiang Province from 1986 to 2015, and the risk assessment model of maize cold damage in northeast China were used, and the risk index values of maize cold damage in Heilongjiang Province from 1986 to 2015 were calculated. And according to the risk index values, Heilongjiang Province was divided into five risk areas. The results showed that the high risk areas and the sub-high risk areas of maize cold damage in Heilongjiang Province in recent 30 years were in Daqing and Suihua cities, the medium risk areas were located in the center of the Songnen Plain and other regions, the sub-low risk areas were located in the Songnen Plain, and most of the rest were the low risk areas.

Analysis of Characteristic and Causes of a Strong Cooling Process in China in the Early Winter of 2020/2021

The characteristics and causes of a drop in temperature during a cold wave process in the early winter of 2020/2021 were analyzed.The results show that the air temperature at 700-600 hPa over China was firstly and mostly influenced by the cold wave process,and then the cold air gradually extended to the lower layer,causing the most severe cooling in North China and its nearby areas.During the cold wave,the longitude of the upper-level jet over the Chinese mainland was larger;the Ural blocking high and the East Asian trough were stronger,so that the geopotential height gradient between the two was also significantly larger;the meridional air flow was abnormally strong,which was conducive to the southward transport of cold air from the middle and high latitudes.Results of the diagnostic analysis further show that the outbreak of the cold wave and the negative temperature tendency anomaly in the key area were mainly caused by the meridional temperature horizontal advection anomaly,while the temperature rise accompanied by abnormal air subsidence compensated for the abnormal decrease in temperature,which was conducive to the gradual rise of temperature in the key area.

Numerical Analysis of Doublet Wells for Cold Energy Storage on Heat Damage Treatment in Deep Mines

Deep mining is an inevitable tendency in the development of coal industry. There are many heat damage problems with the increase of mining depth. The technology of using doublet wells, together with Heat Exchange Machine Systems (HEMSs), to store cold energy is a key to solve the heat damage problems in deep mines. Based on the geological conditions, thermodynamic and hydraulic parameters of Jiahe Mine, the isotherms in the period of cold energy storage and refrigeration and the volumes of cold water within different temperature ranges of the cold energy storage well were numerically analyzed. The results show that 1) with the same pumped and injected water volumes, the lower the temperature of injected water is, the larger the volume of cold water in the cold energy storage well is. With the larger volume, the effect of cold energy storage is better. 2) the larger the volumes of pumped and reinjected water are, the larger the volume of cold water from the cold energy storage well is. With the larger volume, the effect of refrigeration is better. And 3) without disturbance, the volume and temperature of cold water in the cold energy storage well can keep unchanged or have only a little change for a long time. Therefore the technology of doublet wells for cold energy storage is feasible and the cold energy storage aquifers can meet the requirement of the technology.

THE COLD AND HOT DAMAGES TO THE CITRUS IN THE THREE GORGES AREA OF THE CHANGJIANG RIVER

ＴＨＥＣＯＬＤＡＮＤＨＯＴＤＡＭＡＧＥＳＴＯＴＨＥＣＩＴＲＵＳＩＮＴＨＥＴＨＲＥＥＧＯＲＧＥＳＡＲＥＡＯＦＴＨＥＣＨＡＮＧＪＩＡＮＧＲＩＶＥＲＣｈｅｎＺｈｅｎｇｈｏｎｇ（陈正洪）；ＹａｎｇＨｏｎｇｑｉｎｇ（杨红青）；ＮｉＧｕｏｇｕ（倪国裕）（Ａｇｒｏ...

Collision of cold CaF molecules: Towards evaporative cooling

Long range intermolecular interaction potential surface of CaF(~2∑^+) was simulated by employing the MOLPRO program and using the RCCSD(T)/def2-TZVP theory. The predicted data were further fitted to obtain the collision crosssection. The elastic collision cross-section of CaF at the temperature around 2 mK is as high as 6.5 × 10^(-9) cm^2 and the collision rate is over 4.1 × 10~6 Hz. Additionally, we found that an orientation electric field will simplify the intermolecular interaction potential function from quaternary into ternary and the collision cross-section will be raised by about three orders. All-optical evaporative cooling of cold CaF is discussed in the conclusion.

Broadband Vibrational Cooling of Cold Cesium Molecules： Theory and Experiments

一条宽带的使用，频率塑造了翻译联盟者寒冷铯分子上的第二激光最近表明了是也使自由的震动的度凉下来的一个很有效的方法的飞米。冷分子的一件样品，开始散布了超过几个震动的层次，因此被变成了汗衫 X 1Σ g 扎根了电子状态。我们的方法基于使所有激动的与足够宽广的一个系列的由激光光的重复的光抽占据了震动的层次，但是与一个空间轻调节的人在它的频率带宽限制了。以如此的一个方法，我们能从选择水平，分子在积累消除转变。在这篇论文，我们简短报导主要试验性的结果然后地址，以由计算机模拟的一个详细方法，观点为一“完成”分子冷却，也包括自由的旋转的度。因为抽的过程强烈取决于地面的相对形状，激动的潜力弯，通过不同激动的状态的 ro 震动的冷却理论上被比较。

Present status and one upgrading method with a cold compressor of the EAST sub-cooling helium cryogenic system

Since 2006, the superconducting toroidal field（TF） coils of the Experimental Advanced Superconducting Tokomak（EAST） have been successfully cooled by supercritical helium at a temperature of 4.5 K and a pressure of 4 bara in eleven experiments. To obtain higher operating currents and magnetic fields it is necessary to lower the operating temperature of the TF coils.The EAST sub-cooling helium cryogenic system, with a warm oil ring pump（ORP）, was tested twice in cool-down experiments, which made the TF coils operate at 3.8 K. However, the long term operational stability of the sub-cooling system cannot be guaranteed because of the ORP＇s poor mechanical and control performance. In this paper, the present status of the EAST subcooling helium cryogenic system is described, and then several cooling methods below 4.2 K and their merits are presented and analyzed. Finally, an upgrading method with a cold compressor for an EAST sub-cooling helium cryogenic system is proposed. The new process flow and thermodynamic calculation of the sub-cooling helium system, and the main parameters of the cold compressor, are also presented in detail. This work will provide a reference for the future upgrading of the sub-cooling helium system for higher operation parameters of the EAST device.

Collapse Simulation and Response Assessment of a Large Cooling Tower Subjected to Strong Earthquake Ground Motions

Large cooling towers in thermal power plants and nuclear power plants are likely to suffer from strong earthquakes during service periods.The resulting destructions of the cooling towers would endanger the power plants and threaten the security of the related areas.It is important to use effective means to evaluate the safety status of the cooling towers and guide further precautions as well as retrofitting efforts.This paper is therefore focused on an elaborate numerical investigation to the earthquake-induced collapses of a large cooling tower structure.A complete numerical work for simulation of material failure,component fracture,structural buckling and system collapse is presented by integrating the stochastic damage constitutive model of concrete,refined structural element models,and some other key techniques.Numerical results indicate that the damage behavior and collapse mode of the cooling tower are affected notably by the randomness specification of ground motions.The collapse mechanisms of the cooling tower are studied from the energy absorption and dissipation points of view.An effective energy-based criterion is introduced to identify the collapse of the cooling tower under ground motion excitations.While distinct collapse modes are observed,the collapse criterion can predict well the damage and failure of the cooling tower.The proposed methodology is vital to better understanding the disastrous mechanisms and potential failure paths in optimal design of the cooling towers to ensure safety.

Influence of cooling speed on the physical and mechanical properties of granite in geothermal-related engineering

In deep-earth engineering,the high earth temperature can significantly affect the rock's mechanical properties,especially when the rock is cooled during the construction process.Accordingly,whether the cooling speed affects the mechanical and physical properties of rocks is worth to be investigated.The present study explored the influence of the cooling rate on the physical and chemical properties of granite heated at 25–800°C.The mechanical and physical properties involved in this study included uniaxial compression strength,peak strain,modulus,P-wave velocity,mass and volume,the change of which could reflect the sensitivity of granite to the cooling rate.Acoustic emission(AE)monitoring,microscopic observation,and X-ray diffraction(XRD)are used to analyze the underlying damage mechanism.It is found that more AE signals and large-scale cracks are accounted for based on the b-value method when the specimens are cooled by water.Furthermore,the microscopic observation by polarized light microscopy indicates that the density,opening degree,and connectivity of the cracks under water cooling mode are higher than that under natural cooling mode.In addition,the XRD illustrates that there is no obvious change in mineral content and diffraction angle at different temperatures,which confirms that the change of mechanical properties is not related to the chemical properties.The present conclusion can provide a perspective to assess the damage caused by different cooling methods to hot rocks.

Air-Water Cooling System for Switch-Mode Power Supplies

The results are presented of an experimental investigation of heat transfer in an air-liquid cooling system for a Switch-Mode Power Supply (SMPS) for TV digital power amplifiers. Since these SMPSs are characterized by high power and high compactness, thereby making the standard cooling techniques difficult to be used, a new cooling system is developed, using water and air as the cooling media. The active components (MOSFETs) are cooled with a liquid cold-plate, the passive ones (condensers, transformers, coils) with an air flow, in turn cooled by the cold-plate. By inserting the cooling system in an experimental tool where it is possible to control the cooling water, measurements are made of temperature in the significant points of the SMPS. The electric efficiency is also measured. The evaluation of the thermal performance of this cooling system is useful in order to limit its maximum operational temperature. The efficacy of the cooling system is demonstrated;the trends of efficiency and power dissipation are evidenced.

《伤寒论》临证价值刍议

《伤寒论》临证思想研究者众多,已逐渐形成较为完善的伤寒学研究体系,然尚存不足之处,如对此书临床价值认识不全面、疫病诊治重温病轻伤寒、经典理论应对当代疾病及经方运用存在的问题等。提出《伤寒论》为百病立法,治伤寒亦治杂病;疫病诊治重温病轻伤寒,实则寒温相互羽翼;经典研究可借鉴西医思维,应对疾病须以中为基;目前经方运用重方药略理法,亟待构建规范体系等观点,为中医经典临床研究提供思路。

某电机齿轮冷挤压裂纹形成机理研究

针对材料为20Cr的某电机齿轮在冷挤压成形时内齿齿顶面上出现的裂纹缺陷,基于DEFORM-3D对其冷挤压过程进行了模拟,研究了其裂纹形成机理。有限元结果表明,内齿的金属流动速度小于中部及下部外齿的流动速度,内齿齿顶面上齿根处的金属流动速度最小,此处流动最不均匀,易产生应力集中;对齿面的最大主应力及损伤分布进行了分析,得出在内齿齿顶面上,中部及距离下端面1 mm左右的位置应力集中最明显,拉应力较大且大于材料抗拉强度,损伤值也较大且大于临界损伤值,会产生裂纹,与实际情况相符合。通过改变凹模入模角来控制成形缺陷情况,当凹模入模角为23°时,齿根处拉应力下降,损伤值减小,投入生产后次品率从原本的50%降为1%。

云南冬季强降温过程冷空气路径及大气环流差异

基于云南125个测站日平均气温数据,判定了1961—2020年云南冬季95次强降温过程的4种冷空气路径,对比分析了不同路径冷空气对云南降温的影响及大气环流差异.结果表明,东北路径冷空气对云南降温幅度影响最剧烈、影响空间范围最广;偏东路径出现频率最高,偏东路径和偏北路径在降温幅度和影响范围上较为接近;东南路径降温幅度和影响范围最弱,出现频率最低.超前强降温日2 d时,东北路径欧亚大陆500 hPa位势高度场上正高度距平异常区域强度和面积、700 hPa反气旋距平环流强度和西伯利亚高压均为最强,东南路径最弱,偏东路径和偏北路径介于前二者之间.东北路径500 hPa上东亚槽横槽转竖特征最明显,偏东路径和偏北路径东亚槽槽底南压加深,但转竖特征不及东北路径明显;东南路径东亚槽底部较宽广;东北路径副高呈块状面积最小,其它3种路径副高则呈带状,偏东路径副高面积最大.700 hPa上东北路径和偏东路径在日本附近有较强海平面气压负距平发展,朝鲜半岛气旋距平环流较强,其西侧较强的偏北气流引导冷空气进入云南;东南路径和偏北路径在朝鲜半岛气旋距平环流及其西侧的偏北气流较弱.在200 hPa纬向风距平场上,东北路径急流轴附近正负距平区强度最强,偏东路径沿急流轴距平分布为西正东负;东南路径正负距平区强度最弱,负距平区主要分布在急流轴北侧,偏北路径负距平区分布在急流轴南北两侧.