Evaluation of the Direct UTM Coordinates Transformation Method Based on the Standard 7-Parameters Transformation

GNSS(global navigation satellite system)observations produce the geodetic position including latitude,longitude,and altitude(or ellipsoidal height)concerning the global reference datum WGS84(Word Geodetic System 1984),which usually should be converted to another local datum to get the desired position meaning in a physical sense,coordinates of points in the local datum are usually calculated by the seven-parameter transformation method.This paper aims to validate the methods of position transformation between WGS84 and the Iraqi local datum Karbala 1979 using the UTM(universal transverse Mercator)projected coordinates directly.The proposed algorithm was tested for 10 ground control points in Erbil city and many selected points in other different cities over all Iraqi territory.The control points are measured by the CHCNAV i73 GNSS receiver.For the evaluation procedure,the RMSE(root mean square error)of the transformed coordinates is calculated with an average value of±10.715 m as an estimated uncertainty of the direct UTM coordinates transformation method over Erbil city territory,and more than±12 m over different places over Iraqi territory.

Combined Method of Datum Transformation Between Different Coordinate Systems

The similarity transformation model between different coordinate systems is not accurate enough to describe the discrepancy of them.Therefore,the coordinate transformation from the coordinate frame with poor accuracy to that with high accuracy cannot guarantee a high precision of transformation.In this paper,a combined method of similarity transformation and regressive approximating is presented.The local error accumulation and distortion are taken into consideration and the precision of coordinate system is improved by using the recommended method

A complete solution of an improved universal 3D coordinate similarity transformation model

When linearizing three-dimensional(3 D)coordinate similarity transformation model with large rotations,we usually encounter the ill-posed normal matrix which may aggravate the instability of solutions.To alleviate the problem,a series of conversions are contributed to the 3 D coordinate similarity transformation model in this paper.We deduced a complete solution for the 3 D coordinate similarity transformation at any rotation with the nonlinear adjustment methodology,which involves the errors of the common and the non-common points.Furthermore,as the large condition number of the normal matrix resulted in an intractable form,we introduced the bary-centralization technique and a surrogate process for deterministic element of the normal matrix,and proved its benefit for alleviating the condition number.The experimental results show that our approach can obtain the smaller condition number to stabilize the convergence of the interested parameters.Especially,our approach can be implemented for considering the errors of the common and the non-common points,thus the accuracy of the transformed coordinates improves.

Controlling flexural waves in thin plates by using transformation acoustic metamaterials

In this study,we design periodic grille structures on a single homogenous thin plate to achieve anisotropic acoustic metamaterials that can control flexural waves.The metamaterials can achieve the bending control of flexural waves in a thin plate at will by designing only one dimension in the thickness direction,which makes it easier to use this metamaterial to design transformation acoustic devices.The numerical simulation results show that the metamaterials can accurately control the bending waves over a wide frequency range.The experimental results verify the validity of the theoretical analysis.This research provides a more practical theoretical method of controlling flexural waves in thin-plate structures.

Hawking effect and quantum nonthermal radiation of an arbitrarily accelerating charged black hole using a new tortoise coordinate transformation

Using a new tortoise coordinate transformation, this paper investigates the Hawking effect from an arbitrarily accelerating charged black hole by the improved Damour-Ruffini method. After the tortoise coordinate transformation, the Klein-Gordon equation can be written as the standard form at the event horizon. Then extending the outgoing wave from outside to inside of the horizon analytically, the surface gravity and Hawking temperature can be obtained automatically. It is found that the Hawking temperatures of different points on the surface are different. The quantum nonthermal radiation characteristics of a black hole near the event horizon is also discussed by studying the Hamilton-Jacobi equation in curved spacetime and the maximum overlap of the positive and negative energy levels near the event horizon is given. There is a dimensional problem in the standard tortoise coordinate and the present results may be more reasonable.

Correlation of coordinate transformation parameters

Coordinate transformation parameters between two spatial Cartesian coordinate systems can be solved from the positions of non-colinear corresponding points. Based on the characteristics of translation, rotation and zoom components of the transformation, the complete solution is divided into three steps. Firstly, positional vectors are regulated with respect to the centroid of sets of points in order to separate the translation compo- nents. Secondly, the scale coefficient and rotation matrix are derived from the regulated positions independent- ly and correlations among transformation model parameters are analyzed. It is indicated that this method is applicable to other sets of non-position data to separate the respective attributions for transformation parameters.

Coordinate Transformation and Exact Solutions of Schrodinger Equation with Position-Dependent Effective Mass

Using the coordinate transformation method, we solve the one-dimensional Schrodinger equation with position-dependent mass. The explicit expressions for the potentials, energy eigenvalues, and eigenfunctions of the systems are given. The eigenfunctions can be expressed in terms of the Jacobi, Hermite, and generalized Laguerre polynomials. All potentials for these solvable systems have an extra term Vm, which is produced from the dependence of mass on the position, compared with those for the systems of constant mass. The properties of Vm for several mass functions are discussed.

Uzbekistan's coordinate system transformation from CS42 to WGS84 using distortion grid model

Currently,a non-geocentric geodetic coordinate system introduced in 1942(CS42),based on the Krasovsky ellipsoid and the Baltic system of normal heights introduced in 1977,is used for geodetic works in the Republic of Uzbekistan.The development of the GNSS network proposes a task of transition to a new geocentric system based on the World Geodetic System 1984(WGS84)ellipsoid.Many software products adopt 3-or 7-parameter conversions,which can cause errors up to several meters and are not suitable for many applications.In this case,local transformations using a grid of differences between observation points with known coordinates in both datums would give the best accuracy.In this paper,we discuss various interpolation methods(Kriging,Minimum Curvature,Inverse Distance to a Power and Radial Basis Function)to solve the distortion modeling between CS42 and WGS84 systems for national datum improvement.The results show that the distortion models share a common tendency for all interpolation methods:the maximum horizontal displacements are concentrated along the West Tien Shan lineament,which is the boundary of the relief lowering.The discrepancies between the grid-based(calculated)and GPS-measured coordinates are evaluated.Statistical and spatial analysis has confirmed that for the co-ordinate transformation from CS42 to WGS84 and vice versa,grid-based transformation with Radial Basis Function interpolation has a high accuracy transformation.Analysis of the available data across the eastern part of the country shows that some positional distortions existed between the CS42 and WGS84 datums.For the best RBF method,the magnitude of these distortions is about 0.019-0.755 m with a standard deviation of 0.015 m.

SARC Model for Three-Dimensional Coordinate Transformation

In this paper, a transformation model named SARC(static-filter adjustment with restricted condition) is presented, which is more practical and more rigorous in theory and fitting any angle of rotation parameter. The transformation procedure is divided into 4 steps: ① the original and object coordinates can be regarded as observations with errors; ② rigorous formula is firstly deduced in order to compute the first approximation of the transformation parameters by use of four common points and the transformation equation is linearized; ③ calculate the most probable values and variances of the seven transformation parameters by SARC model; ④ to demonstrate validity of SARC , an example is given.

Water Wave Focusing Using Coordinate Transformation

In this paper, wave focusing based on a coordinate transformation is proposed. It is known that the 2-dimensional wave equation which governs a shallow water problem in a potential theory can keep invariance under coordinate transformation. Once equivalent medium parameters are obtained so as to keep the invariance, wave rays can be arbitrarily designed. We show the design of equivalent medium for wave squeezing to focus waves on a specific domain. Numerical computations are carried out by a finite element based software COMSOL Multiphysics. Results show good agreement between predictions from the theory and computations. It can be applied for a wide range of frequency because the proposed method is able to be applied regardless of the frequency.

Stability analysis of the projectile based on random center manifold reduction

The center manifold method has been widely used in the field of stochastic dynamics as a dimensionality reduction method.This paper studied the angular motion stability of a projectile system under random disturbances.The random bifurcation of the projectile is studied using the idea of the Routh-Hurwitz stability criterion,the center manifold reduction,and the polar coordinates transformation.Then,an approximate analytical presentation for the stationary probability density function is found from the related Fokker–Planck equation.From the results,the random dynamical system of projectile generates three different dynamical behaviors with the changes of the bifurcation parameter and the noise strength,which can be a reference for projectile design.

Poststack reverse-time migration using a non-reflecting recursive algorithm on surface relief

Presently the research based on the accurate seismic imaging methods for surface relief, complex structure, and complicated velocity distributions is of great significance. Reverse-time migration is considered to be one of highly accurate methods. In this paper, we propose a new non-reflecting recursive algorithm for reverse-time migration by introducing the wave impedance function into the acoustic wave equation and the algorithm for the surface relief case is derived from the coordinate transformation principle. Using the exploding reflector principle and the zero-time imaging condition of poststack reverse- time migration, poststack numerical simulation and reverse-time migration with complex conditions can be realized. The results of synthetic and real data calculations show that the method effectively suppresses unwanted internal reflections and also deals with the seismic imaging problems resulting from surface relief. So, we prove that this method has strong adaptability and practicality.

Jump Drive, Replicators, Transporters, and Time Travel

Jumping from place to place, replicating food, biological or mechanical parts or beaming up somebody, may not be fiction, rather an issue of practical implementation as shall be observed in this paper. Devices like transporter, food replicators or warp drive intrigue our imagination. This paper is intended to show that Jump drive is an issue of coordinate transformation. Changing location from planet X to planet Y does not necessarily require travelling a distance D connecting between the two planets. The theoretical knowledge of changing the location from coordinate X to coordinate Y exists;we do that in signal processing, but, we have not yet developed such a machine. The present paper shows the feasibility of jump drive;however, much work needs to be done on the implementation.

Quantum radiation of non-stationary Kerr-Newman-de Sitter black hole

By introducing a new tortoise coordinate transformation, we investigate the quantum thermal and non-thermal radiations of a non-stationary Kerr-Newman-de Sitter black hole. The accurate location and radiate temperature of the event horizon as well as the maximum energy of the non-thermal radiation are derived. It is shown that the radiate temperature and the maximum energy are related to not only the evaporation rate, but also the shape of the event horizon, moreover the maximum energy depends on the electromagnetic potential. Finally, we use the results to reduce the non-stationary Kerr-Newman black hole, the non-stationary Kerr black hole, the stationary Kerr-Newman-de Sitter black hole, and the static Schwarzshild black hole.

Automatic Method for Synchronizing Workpiece Frames in Twin-robot Nondestructive Testing System

The workpiece frames relative to each robot base frame should be known in advance for the proper operation of twin-robot nondestructive testing system. However, when two robots are separated from the workpieces, the twin robots cannot reach the same point to complete the process of workpiece frame positioning. Thus, a new method is proposed to solve the problem of coincidence between workpiece frames. Transformation between two robot base frames is initiated by measuring the coordinate values of three non-collinear calibration points. The relationship between the workpiece frame and that of the slave robot base frame is then determined according to the known transformation of two robot base frames, as well as the relationship between the workpiece frame and that of the master robot base frame. Only one robot is required to actually measure the coordinate values of the calibration points on the workpiece. This requirement is beneficial when one of the robots cannot reach and measure the calibration points. The coordinate values of the calibration points are derived by driving the robot hand to the points and recording the values of top center point（TCP） coordinates. The translation and rotation matrices relate either the two robot base frames or the workpiece and master robot. The coordinated are solved using the measured values of the calibration points according to the Cartesian transformation principle. An optimal method is developed based on exponential mapping of Lie algebra to ensure that the rotation matrix is orthogonal. Experimental results show that this method involves fewer steps, offers significant advantages in terms of operation and time-saving. A method used to synchronize workpiece frames in twin-robot system automatically is presented.

Forward Modeling of Gravity,Gravity Gradients,and Magnetic Anomalies due to Complex Bodies

On the basis of the results of improved analytical expression of computation of gravity anomalies due to a homogeneous polyhedral body composed of polygonal facets, and applying the forward theory with the coordinate transformation of vectors and tensors, we deduced both the analytical expressions for gravity gradient tensors and for magnetic anomalies of a polygon, and obtained new analytical expressions for computing vertical gradients of gravity anomalies and vertical component of magnetic anomalies caused by a polyhedral body. And also we developed explicitly the complete unified expressions for the calculation of gravity anomalies, gravity gradient, and magnetic anomalies due to the homogeneous polyhedron. Furthermore, we deduced new analytical expressions for computing vertical gradients of gravity anomalies due to a finite rectangular prism by applying the newly obtained expressions for gravity gradient tensors due to a polyhedral target body. Comparison with forward calculation of models shows the correctness of these new expressions. It will reduce forward calculation time of gravity-magnetic anomalies and improve computational efficiency by applying our unified expressions for joint forward modeling of gravity-magnetic anomalies due to homogeneous polyhedral bodies.

Deep Learning Predicts Stress–Strain Relations of Granular Materials Based on Triaxial Testing Data

This study presents an AI-based constitutive modelling framework wherein the prediction model directly learns from triaxial testing data by combining discrete element modelling(DEM)and deep learning.A constitutive learning strategy is proposed based on the generally accepted frame-indifference assumption in constructing material constitutive models.The low-dimensional principal stress-strain sequence pairs,measured from discrete element modelling of triaxial testing,are used to train recurrent neural networks,and then the predicted principal stress sequence is augmented to other high-dimensional or general stress tensor via coordinate transformation.Through detailed hyperparameter investigations,it is found that long short-term memory(LSTM)and gated recurrent unit(GRU)networks have similar prediction performance in constitutive modelling problems,and both satisfactorily predict the stress responses of granular materials subjected to a given unseen strain path.Furthermore,the unique merits and ongoing challenges of data-driven constitutive models for granular materials are discussed.

A new interpolation method based on satellite physical character in using IGS precise ephemeris

Due to the deficiency of sliding Lagrange polynomial interpolation, the author proposes a new interpolation method, which considers the physical character of satellite movement in coordinate transformation and reasonable selection of interpolation function. Precision of the two methods is compared by a numerical example. The result shows that the new method is superior to the sliding Lagrange polynomial interpolation in interpolation and extrapolation, especially in extrapolation that is over short time spans.

DISTANCE MEASURING MODELING AND ERROR ANALYSIS OF DUALCCD VISION SYSTEM SIMULATING HUMAN EYES AND NECK

A dual-CCD simulating human eyes and neck (DSHEN) vision system is putforward. Its structure and principle are introduced. The DSREN vision system can perform somemovements simulating human eyes and neck by means of four rotating joints, and realize preciseobject recognizing and distance measuring in all orientations. The mathematic model of the DSHENvision system is built, and its movement equation is solved. The coordinate error and measureprecision affected by the movement parameters are analyzed by means of intersection measuringmethod. So a theoretic foundation for further research on automatic object recognizing and precisetarget tracking is provided.

Three-dimensional tidal current numerical model of the Oujiang Estuary

The characteristics of three-dimensional （3-D） tidal current in the Oujiang Estuary are investigated according to in situ observations. The Oujiang Estuary has features of irregular coastline, complex topography, many islands, moveable boundary, and submerged dyke, therefore, σ 3-D numerical model oil an unstructured triangular grid has been degeloped. The σ coordinate transforination, the moveable boundary and submerged dyke treatment techniques were employed in the model so it is suitable for the tidal simulations in the Oujing Estuary with submerged dyke and moveable boundary problems. The model is evaluated with the in situ data, and the results show that the calculated water elevations at 19 stations and currents at 19 profiler stations are in good agreement with measured data both in magnitude and phase. This numerical model is applied to the 3-D tidal circulation simulations of experiments in stopping flow transport through the South Branch of the Oujiang Estuary, and the feasibility to cutoff the flow in the South Branch of the Oujiang Estuary is demonstrated by numerical simulation experiments. The developed numerical model simulated the 3-D tidal current circulations in complicated coastal and estuarine waters very well.