Interphase migration and enrichment of lead and zinc during copper slag depletion

An interphase migration and enrichment model of lead and zinc during molten copper slag depletion was established.The occurrence of various components in copper slag was predicted using sulfur-oxygen potential calculations and confirmed through high-temperature experiments.The recovery rate of copper can reach 90.13%under the optimal conditions of 1200°C,an iron to silicon mass ratio of 1.0,3 wt.%ferrous sulfide,and a duration of 45 min.Lead(54.07 wt.%)and zinc(17.42 wt.%)are found in the flue dust as lead sulfate,lead sulfide,and zinc oxide,while copper matte contains lead(14.44 wt.%)and zinc sulfide(1.29 wt.%).The remaining lead and zinc are encapsulated as oxides within the fayalite phase.

Serum Zinc and Copper Level in Juvenile Idiopathic Arthritis (JIA) Patients and Its Correlation with Disease Duration-A Tertiary Hospital Study

Background: Juvenile Idiopathic Arthritis (JIA) is the most prevalent rheumatic disease in children. It is associated with abnormal levels of serum zinc (Zn) and copper (Cu) as during inflammation serum copper concentration increases and zinc decreases. Objective: To assess the serum Zn and Cu levels in different sub-types of JIA patients and their correlation with the disease duration. Methods: This cross-sectional study was conducted over twelve months at the Pediatric Rheumatology Division, Department of Paediatrics, Bangabandhu Sheikh Mujib Medical University. Sixty-nine JIA cases that fulfilled the International League of Association for Rheumatology (ILAR) criteria were taken as cases and age and sex-matched healthy children were considered as controls. The serum Zn and Cu tests were done using the spectrophotometric method with INDIKO PLUS Drug Analyzer. Data were recorded in a pre-designed questionnaire. Data were checked, verified and analyzed manually where continuous variables were analyzed using unpaired t-test and categorical variables using the ANOVA test. Pearson’s correlation coefficient test was used to see the correlation of serum zinc and copper levels with disease duration. Results: Boys were predominant in both case and control groups, with the majority within the 10 to 16-year-age group. Enthesitis-related arthritis (ERA) was the most common subtype followed by sJIA, Oligo JIA, Poly JIA (RF-) and unclassified subtypes. Disease duration was found less than 12 months in 30.4% of JIA patients. Serum analysis revealed a statistically significant reduction in mean zinc levels and increased copper levels in JIA patients compared to controls. This study observed a negative correlation between serum zinc levels and disease duration, whereas serum copper levels exhibited a positive correlation with disease duration. Conclusion: In conclusion, this study revealed that JIA patients exhibit alterations in serum zinc and copper levels. Serum copper levels showed a positive correlation and serum zinc levels showed a negative correlation with the duration of the disease.

Effect of Copper and Zinc on Accumulation of Vitamin E in Wheat Embryo-derived Callus

[Objective] The aim was to study the effect of the content of copper and zinc on in medium the vitamin E accumulation in wheat embryo-dreived callus.[Method] The mathematical models were established to describe the growth kinetics and the vitamin E accumulation in wheat embryo callus cells.With the aim of getting the highest accumulation of the secondary metabolite Vitamin E,the optimal combination of copper and zinc in medium was confirmed by testing.[Result] The results showed that the production of vitamin E in B5 medium reached the highest value with 2.0 mg/mL ZnSO4·7H2O and 0.1 mg/mL CuSO4·5H2O.The fitting degrees of kinetic models of vitamin E accumulation and cell growth were 97.53% and 95.60%,respectively,which indicated good nonlinear relationships.[Conclusion] Both copper and zinc could affect the accumulation of vitamin E in wheat germ callus,and Copper showed more prominent effect than Zn.Synergism existed in low copper and zinc concentration,and the inhibitive effect enhanced with the increase of the concentrations.

Copper and Zinc Enrichment in Different Size Fractions of Organic Matter from Polluted Soils

Bioavailability of heavy metals in soil organic matter depends on itscomponents. Characterization of heavy metal distributions in different fractions of soil organicmatter is needed for better understanding of the fate of heavy metals. This study investigated theaccumulation and partitioning of copper and zinc among different size particulate organic matter(POM) fractions in polluted soils from a former iron ore processing site in western Shaoxing County,Zhejiang Province. Physical fractionations were carried out to separate soil primary particlesaccording to their size and density. Copper and Zn had a heterogeneous distribution among soilparticle fractions. Copper and Zn were significantly (p < 0.05) enriched in the POM fractions. >0.05 mm POM and < 0.05 mm fine soil fractions were mainly responsible for Cu and Zn retention insoils. The POM fraction contained up to 1 322 mg Cu kg^(-1) and 1115 mg Zn kg^(-1) and the fine soilfraction contained up to 422 mg Cu kg^(-1) and 537 mg Zn kg^(-1). The total POM fraction wasresponsible for 15.8%-41.2% and 12.2%-31.7% of the total amount of Cu and Zn, respectively, in thepolluted soils. The percentages of Cu and Zn associated with organic matter in < 0.05 mm fine soilfractions for the polluted soils ranged from 14.1% to 24.5%, and 5.4% to 15.8%, respectively.Accumulation of soil organic matter could increase enrichment of Cu (or Zn) in the POM fractions.Also, Cu provided a greater enrichment in the POM fractions than Zn.

Recovery of nickel,cobalt,copper and zinc in sulphate and chloride solutions using synergistic solvent extraction

A number of synergistic solvent extraction （SSX） systems have been developed to recover nickel, cobalt, zinc and copper from sulphuric and chloride leach solutions by the solvent extraction team of CSIRO, Australia. These in- clude （1） Versatic 10/CLXS0 system for the separation of Ni from Ca in sulphate solutions, （2） Versatic 10/4PC system for the separation of Ni and Co from Mn/Mg/Ca in sulphate solutions, （3） Cyanex 471X/HRJ-4277 system for the separation of Zn from Cd in sulphate solutions, （4） Versatic 10/LIX63 system for the separation of Co from Mn/Mg/Ca in sulphate solutions, （5） Versatic 10/LIX63/TBP system for separation of Ni and Co from Mn/Mg/Ca in sulphate solutions, （6） Versatic 10/LIX63 system for the separation of cobalt from nickel in sulphate solutions by difference in kinetics, （7） Cyanex 272/LIX84 system for the separation of Cu/Fe/Zn from Ni/Co in sulphate solutions, （8） Versatic 10/LIX63fFBP system to recover Cu/Ni from strong chloride solutions, and [9） Versatic 10/LIX63 system to separate Cu from Fe in strong chloride solutions. The synergistic effect on metal separation and efficiency is presented and possible industrial applications are demonstrated. The chemical stability of selected SSX systems is also reported.

Extractability and Mobility of Copper and Zinc Accumulated in Sandy Soils

Extractability and mobility of Cu and Zn and their relationships with 1) accumulation of Cu and Zn and 2) soil pH were studied in three sandy soils (Wabasso, Ankona, and Winder) from commercial citrus groves in Florida, USA. The soils, with a broad range of Cu and Zn concentrations, were fractionated by a modified procedure of Amacher, while Cu and Zn mobility were evaluated using column leaching. The extractability of Cu and Zn increased with decreasing soil pH. Also with increasing total soil Cu and Zn for extractable Cu in the Wabasso sand a threshold level, where the metal extraction rate increased, was noted at 100 mg kg-1, whereas for extractable Zn in the Wabasso sand the threshold level was found at 60 mg kg-1 and in the Ankona sand at 120 mg kg-1. These results suggested that the release potential of Cu and Zn was greater in the Wabasso sand than in the Ankona sand. The column leaching experiment showed that at total soil Cu or Zn concentrations < 100 mg kg-1 all leachates had low Cu and Zn concentrations. However at total concentrations > 200 mg kg-1 for Cu and > 150 mg kg-1 for Zn with decreasing soil pH, the concentrations of both Cu and Zn in the leachates increased exponentially. Also in these sandy soils soluble Cu and Zn mainly originated from the exchangeable fractions, and pH was a key factor controlling Cu and Zn extractability and mobility.

Competitive Complexation of Copper and Zinc by Sequentially Extracted Humic Substances from Manure Compost

Chicken manure with similar content of copper and zinc was changes of organic carbon and humus substance complexed chosen to conduct a composting experiment to investigate the copper （HS-Cu） and zinc （HS-Zn）, which were extracted by water （H2O）, sodium hydroxide （NaOH）, and sodium pyrophate-NaOH mixture （Na4P2O7-NaOH）, sequentially. Distributions of copper and zinc in fulvic acids （FA） and humic acids （HA） in the three extracts were studied. During manure composting, the concentrations of copper and zinc increased from about 500 mg kg^-1 in the raw material to 1 100 mg kg^-1 in the final products. HS-Cu in H2O, NaOH, and Na4P2O7-NaOH extracts occupied 6.7, 26.7, and 19% averagely of total copper and HS-Zn represented 2.7, 13.7, and 17% averagely of total zinc in compost, respectively. In water extracts, both HA and FA mainly complexed with Cu and the mole ratio of Cu to Zn was 2.8 in HA fractions and was 2.6 in FA fractions, respectively. HA mainly complexed with copper, so that the ratios of HA-Cu to HA-Zn averaged 3.4 in NaOH extracts. FA had a similar potential to complex with copper and zinc, so that the ratio of FA-Cu to FA-Zn was close to 1. In Na4P2O7-NaOH extracts, HA or FA had a similar potential to complex with copper and zinc. The ratio of HS-Cu to HS-Zn was close to 1. With manure composting, Na4P2O7-NaOH extractable HS-Zn increased to a level as high as HS-Cu. This indicated that more and more stable complexes of HS-Zn were formed in the late decomposition period. The competition between copper and zinc to be complexed with humic substance became weaker and weaker with the decomposition process.

Leaching of Copper and Zinc in a Garden Soil Receiving Poultry and Livestock Manures from Intensive Farming

The leaching characteristics of a garden soil may be greatly affected by application of poultry and livestock manures from intensive farming. Packed soil columns of a garden soil （CK） and the soils after respectively receiving 2% pig manure （PM）, chicken manure （CM）, and commercial organic manure （OM） were leached with 0.05 mol L^-1 Ca（NO3）2 and 0.01 mol L 1 EDTA solutions. The leachate EC （electric conductivity） values gradually increased at the beginning and then reached a stable value when the soil columns were leached with 0.05 mol L^-1 Ca（NO3）2 solution. The leachate EC values showed a peak-shape when leached with 0.01 mol L^-1 EDTA solution. In all the soil columns, the pH values of the leachates decreased with increase of displacement volumes when the Ca（NO3）2 solution was used. The total amounts of Cu and Zn eluted from the four soil columns were significantly correlated with the extracted soil Cu and Zn concentrations by 1.0 mol L^-1 NH4NO3, but were not correlated with the leachate dissolved organic carbon （DOC） contents. The Zn concentration in the leachate of the PM-treated soil column with 0.05 mol L^-1 Ca（NO3）2 solution was above the Quality Standard III for Ground Water of China （GB/T 14848-93, Zn 〈 1.0 mg L^-1）. When compared with 0.05 mol L^-1 Ca（NO3）2, the EDTA solution significantly accelerated Cu and Zn elutions in the manure-treated columns. This suggested that applying poultry and livestock manures from intensive farming to farmland might pose a threat to the groundwater quality.

Selective separation of copper and cadmium from zinc solutions by low current density electrolysis

Copper and cadmium ions were selectively separated from zinc sulphate aqueous solution or zinc ammonia/ammonium sulphate aqueous solution by low current density electrolysis.It was shown that the concentration of cadmium ion in zinc sulphate solution decreased from 4.56 g/L to 0.18 g/L in an electrolysis time of 8.5 h,whilst it decreased from 5.16 g/L to lower than 0.005 g/L in zinc ammonia/ammonium sulphate aqueous solution.On the other hand,the deposition rate of copper was so low that it was difficult to separate copper and cadmium ions from the zinc ammonia/ammonium sulphate aqueous solution during electrolysis.But copper ion could be decreased to 0.002 g/L in this solution through solvent extraction by using kerosene diluted LIX984N as extractant.Therefore,it is favorable to recover cadmium ion from the zinc ammonia/ammonium sulphate solution by electrolysis after solvent extraction of copper.

Use of ionic liquid in leaching process of brass wastes for copper and zinc recovery

Brass ash from the industrial brass manufacturer in Turkey was leached using the solutions of ionic liquid （IL） 1-butyl-3-methyl-imi-dazolium hydrogen sulfate （[bmim]HSO4） at ambient pressure in the presence of hydrogen peroxide （H2O2） and potassium peroxymonosulfate （oxone） as the oxidants. Parameters affecting leaching efficiency, such as dissolution time, IL concentration, and oxidizing agent addition, were investigated. The results show that [bmim]HSO4 is an efficient IL for the brass ash leaching, providing the dissolution efficiencies of 99%for Zn and 24.82%for Cu at a concentration of 50vol%[bmim]HSO4 in the aqueous solution without any oxidant. However, more than 99%of zinc and 82%of copper are leached by the addition of 50vol%H2O2 to the [bmim]HSO4 solution. Nevertheless, the oxone does not show the promising oxidant behavior in leaching using [bmim]HSO4.

Solvent extraction of copper and zinc from bioleaching solutions with LIX984 and D2EHPA

The solvent extraction of copper and zinc from the bioleaching solutions of low-grade sulfide ores with LIX984 and D2EHPA was investigated. The influences of extractant content, aqueous pH value, phase ratio and (equilibration) time on metals extraction were studied. The results show that LIX984 has a higher selectivity for copper than for iron, zinc and other metals, and has the copper extraction rate above 97%, while the zinc and iron extraction rate is less than 1.6% respectively. Zinc extraction is carried out following the copper extraction from the raffinate. The zinc extraction with di(2-ethylhexyl) phosphoric acid(D2EHPA) is low due to its poor cation exchange. A sodium salt of D2EHPA is used and the zinc extraction rate is enhanced to above 98%. Though iron (Ⅲ) is strongly extracted before the extraction of zinc by D2EHPA, it is difficult to strip iron from the organic phase by sulfuric acid. The zinc stripping rate is above 99% with 100g/L sulfuric acid, while that of iron is 0.16%. Hence, the separation of zinc from iron can be achieved by the selective stripping.

Concentrations of copper, zinc and manganese in Tree Sparrow (Passer montanus) at Jixi, Heilongjiang Province, China

Concentrations of copper （Cu）, zinc （Zn） and manganese （Mn） were measured in four tissues of Tree Sparrow （Passer montanus） from three sites in Heilongjiang province, China, during four seasons. Among the four measured tissues （primary feathers, liver, heart, and pectoral muscle）, the highest concentrations were found in feathers （Zn） or liver （Cu and Mn）, and the lowest concentrations were in muscle, except Cu. For Mn, mean concentrations of the birds from the three study sites were, in decreasing order： Didao mining area （DMA） 〉 urban district of Jixi （UDJ） 〉 Phoenix Mountain national nature reserve （PMR, the reference site）, but not for Zn and Cu. There were significant differences between metal concentrations at the three sites, but differences were not significant for Mn （in muscle and feathers） and Cu （in feathers）. For most elements, the mean concentrations were greatest in summer.

Uncertainty in Detecting Copper and Zinc Contents in Maize Flour by Flame Atomic Absorption Spectrometry with Wet Digestion Method

[ Objective] This study aimed to evaluate the uncertainty in detecting copper and zinc contents in maize flour by flame atomic absorption spectrometry. [ Method] Combined with the actual inspection experience, the uncertainty in detecting copper and zinc contents in maize flour by tame atomic absorption spec- trometry was evaluated to establish the mathematical model. The uncertainty sources in the experimental process were investigated to analyze several components af- fecting the uncertainty in sample detection, including sample weighing, standard material transfer, solution dilution and volume setting, curve fitting, and repeat- ability of measurement instruments. [ Result] Standard curve fitting and repeatability test were two major factors that significantly affected the combined standard uncertainty. However, in the actual detection process, standard curve calibration and repeated detection procedures should be controlled strictly. Finally, the ex- panded uncertainty of copper and zinc contents in maize flour was （ 1.38 ± 0.08） mg/kg and （ 10.20 ± 1.20） mg/kg, respectively. [ Conclusion] This study provided reference for improving the accuracy and reliability of the detection method.

Removal of Cadmium, Copper, and Zinc from Aqueous Solution by Activated Carbon Impregnated with 8-Hydroxyquinoline

The removal of cadmium, copper, and zinc from aqueous solution using activated carbon impregnated with 8-Hydroxyquinoline （oxine） was investigated in this study. The study was conducted using a completely mixed batch technique. Quantitative evaluation of the experimental results showed that the adsorption capacity of oxine impregnated activated carbon was higher than that of the virgin activated carbon for the three heavy metals. For oxine impregnated activated carbon, the Freundlieh distribution coefficient, kd , values were 23, 100, and 104 times larger than those of the virgin activated carbon for cadmium, copper, and zinc, respectively. Moreover, for oxine impregnated activated carbon, the kd values followed the sequence Cu 〉 Zn 〉 Cd which aggress well with the stability constants reported in the literature for the complexation of the three heavy metals with 8-Hydroxyquinoline.

Effects of Copper and Manganese on Hemocyte Apoptosis and Antagonism of Iron and Zinc in Oreochromis niloticus

This study aimed to investigate the effects of copper and manganese on hemocyte apoptosis and the antagonism of iron and zinc in Oreochromis niloticus The heavy metal contents in fish blood and feed were determined by atomic absorption spectrophotometry, and the hemocyte apoptosis was determined by flow cytometry. A total of 360 tilapias were selected, and they were divided randomly and evenly into 12 groups. In the challenge groups, the tilapias were fed with con stant-level copper sulfate（0, 200 mg/kg） and manganese sulfate（0, 120 mg/kg）; in the antagonism groups, the tilapias were fed with constant-level zinc sulfate（20320 mg/kg） and iron sulfate（150, 350 mg/kg）. After 20-week aquaculture, the hemocyte apoptosis rates in the copper and manganese groups were significantly increased; with the increased addition levels of iron and zinc, the hemocyte apopto sis rates in the iron and zinc groups were significantly reduced, but they were stil higher than that in the control group. In conclusion, excessive copper and manganese can cause apoptosis in hemocytes of O. niloticus. However, the toxic effects of copper and manganese can be antagonized by iron and zinc.

Zinc and copper bioaccumulation in fi sh from Laizhou Bay, the Bohai Sea

Abstract Zinc （Zn） and copper （Cu） concentrations were determined in the tissues （muscle, stomach, liver, gills, skin, and gonads） of five commercial fish species （mullet Liza haematocheilus, flathead Platycephalus indicus, mackerel Scomberomorus niphonius, silver pomfret Pampus argenteus, and sea bass Lateolabrax japonicus） from Laizhou Bay in the Bohai Sea. Metal bioaccumulation was highest in the metabolically active tissues of the gonads and liver. Bioconcentration factors for Zn were higher in all tissues （gonads 44.35, stomach 7.73, gills 7.72, liver 5.61, skin 4.88, and muscle 1.63） than the corresponding values for Cu （gonads 3.50, stomach 3.00, gills 1.60, liver 5.43, skin 1.50, and muscle 0.93）. Mackerel tissues accumulated metal to higher concentrations than did other fish species, but bioaccumulation levels were not significantly correlated with the trophic levels of the fish. Zn and Cu concentrations in the tissues were generally negatively correlated with fish length, except for a few tissues of sea bass. Risk assessment based on national and international permissible limits and provisional tolerances for weekly intake of Zn and Cu revealed that the concentrations of these two metals in muscle were relatively low and would not pose hazards to human health.

Zinc and Copper Status in Urban Thai PregnantWomen and Their Pregnancy Outcome

Zinc and copper intakes and serum concentrations were determined at the 32th and 36th week of pregnancy in 96 healthy Thai women attending a prenatal clinic. Dietary data from 3-day food records revealed that the mean dietary zinc and copper intakes in Thai pregnant women were 6. 9 and 1. 7mg/d (equivalent to 34 and 69% of Thai RDA), respectively. Fifty-five percent of zinc intake was from animal origin, whereas 59% of copper intake was from plant origin.The infants of the 64 women who were in the study until delivery, were all normal.Most (>96%) of the maternal serum zinc and copper concentrations were within normal ranges. Only one woman at 32th week had low serum zinc level (<6. 4μmol/L). There were no significant correlations between the maternal serum zinc or copper levels and pregnancy outcome (birth weight and birth length). In this study, although the zinc and copper intake in most Thai pregnant women (99 and 58%, respectively) were less than two-thirds of the Thai RDAs, they were not at risk of suffering from zinc and copper deficiencies as determined by serum zine and copper concentrations, abnormal parturition and abnormal pregnancy outcome.

Kinetic Study of Cementation of Copper on Zinc Metal in Ethanol-Water Mixtures

The cementation reaction of copper on zinc metal in solutions of different concentrations ofcopper sulphate, at 25℃, has been studied and it is found to be a first order reaction. Moreover,the rates of this reaction at 0.15 mol'L-1 copper sulphate solution have been measured in a varietyof ethanol-water media at temperatures from 20℃ to 40℃. The correlation between the masstransfer coefficient and the dielectric constant has been investigated. Also, the thermodynamicparameters of activation have been calculated. The isokinetic relationship reveals the existenceof compensation effect, where the solute-solvent interactions play an important role.

Release behavior of copper and zinc from sandy soils

The concentrations and chemical forms of copper(Cu) and zinc(Zn) in surface soils directly influence the movement of Cu and Zn. In this study, thirteen sandy soil samples with a wide range of total Cu and Zn concentrations were collected for evaluating the relationships between Cu and Zn release and extraction time, ratio of soil to water, pH and electrolyte types. The results indicated that Cu released in batch extraction that represents long-term leaching was mainly from exchangeable, and carbonate bound Cu fractions, and Zn released in the batch extraction was mainly from its carbonate bound fraction. However, the Cu and Zn leached from the soils using the column leaching that represents short-term leaching were mainly from their exchangeable fractions. Soil column leaching at different pH values indicated that the amounts of leached Zn and Cu were greatly affected by pH. The Cu and Zn release experiments with varying extraction times and ratio of soil to water suggest that long-term water-logging in the soils after rain may increase contact time of the soils with water and the release of Cu and Zn to water from the soils, and total amounts of Cu or Zn released from the soils increase, but the Cu or Zn concentration in the surface runoff decrease with increasing rainfall intensity. The increased Ca concentration in soil solution increased stability of organic matter-mineral complexes and might decrease the dissolution of organic matter, and thus decreased the release of Cu-binding component of organic matter. However, high concentration of Na in the soil solution increased the dispersion of the organic matter-mineral complexes and increased dissolution of organic matter and the release of Cu from the soils.