Long metal fibers were manufactured in horizontal lathe with a multi-tooth tool. Based on the coarse antler surface structure of copper fibers, a new sintering technology was put forward to manufacture a kind of orien...Long metal fibers were manufactured in horizontal lathe with a multi-tooth tool. Based on the coarse antler surface structure of copper fibers, a new sintering technology was put forward to manufacture a kind of oriented linear copper fiber sintered felt. The sintering mechanism of oriented linear copper fiber sintered felt was studied. Compared with sintered copper-wire felt, the characteristics of sintered copper-fiber felts were analyzed in details. Owing to the coarse antler surface structure of copper fibers, oriented linear copper-fiber felt was sintered under the condition of micro/nano scale range, and copper fibers easily bonded together in the sintering process. Microchannels with micro-scale coarse antler surface structure were constructed. These characters give oriented linear copper fiber felt some new merits: high filtration accuracy, high flow capability, low resistance loss, good capability to resistance pressure, stable and uniform pore, high specific surface area. The properties of oriented linear copper fiber sintered felt were analyzed.展开更多
The structure of current collectors has significant effects on the performance of a lithium-ion battery(LIB).In this study,we use copper fiber felts made by multi-tooth cutting and high-temperature solid-phase sinteri...The structure of current collectors has significant effects on the performance of a lithium-ion battery(LIB).In this study,we use copper fiber felts made by multi-tooth cutting and high-temperature solid-phase sintering as the current collector for LIBs.An integrated porous electrode based on CuO nanoflowers/copper fiber felt is developed for the anode.Results suggest that the reversible capacity and cycle stability of this new anode are significantly improved,compared with the pristine bare-surface copper plate under the same condition of rate cycles.The new anode structure based on the copper-fiber felt with a porosity of 60%exhibits a higher performance with an initial specific capacity of 609.5 mAh g^(-1)and retains 486.1 mAh g^(-1)after 200 cycles at a current density of 0.5 C.The improved electrochemical performance of this electrode is attributed to its large surface area of CuO nanoflowers and porous structure of the copper fiber felt,due to enhanced contact between the active material of CuO nanoflowers and electrolyte.This pore-rich structure makes the electrolyte easy to permeate into the electrode,shortens the diffusion path of Li^(+),reduces the internal resistance and alleviates the volume expansion of the active material during the insertion and desertion processes of Li^(+).展开更多
The weak interface bonding of metal matrix reinforced by carbon fibers is the central problem of fabricating such composites. Depositing copper coating on carbon fibers is regarded as a feasible method to solve the pr...The weak interface bonding of metal matrix reinforced by carbon fibers is the central problem of fabricating such composites. Depositing copper coating on carbon fibers is regarded as a feasible method to solve the problem. In this paper, copper coating has been deposited on the fibers through both electroless deposition and electroplating methods. Two kinds of complexing agents and two stabilizing agents are taken during the electroless plating process. The solution is stable, and little extraneous component is absorbed on the surface. After adding additive agents and increasing the concentration of H2SO4 to the acid cupric sulfate electrolyte, the "black core" during usual electroplating process is avoided. The quality of copper coating is analyzed using SEM and XRD, etc.展开更多
Continuous carbon fiber reinforced copper matrix composites with 70%(volume fraction) of carbon fibers prepared by squeeze casting technique have been used for investigation of the coefficient of thermal expansion(CTE...Continuous carbon fiber reinforced copper matrix composites with 70%(volume fraction) of carbon fibers prepared by squeeze casting technique have been used for investigation of the coefficient of thermal expansion(CTE) and thermal conductivity.Thermo-physical properties have been measured in both,longitudinal and transversal directions to the fiber orientation.The results showed that Cf/Cu composites may be a suitable candidate for heat sinks because of its good thermo-physical properties e.g.the low CTE(4.18×10-6/K) in longitudinal orientation and(14.98×10-6/K) in transversal orientation at the range of 20-50℃,a good thermal conductivity(87.2 W/m·K) in longitudinal orientation and(58.2 W/m·K) in transversal orientation.Measured CTE and thermal conductivity values are compared with those predicted by several well-known models.Eshelby model gave better results for prediction of the CTE and thermal conductivity of the unidirectional composites.展开更多
In this work, an electroless method of coating copper on the basalt short fibers using copper sulphate solution is described. In order to avoid any interfacial reactions in the basalt fiber reinforced metal matrix com...In this work, an electroless method of coating copper on the basalt short fibers using copper sulphate solution is described. In order to avoid any interfacial reactions in the basalt fiber reinforced metal matrix composites, the basalt fibers were coated with copper. The effects of the time of sensitization, activation, metallization, PdCl2 concentration, pH and temperature bath on the extent of copper coating on basalt fiber are reported. The conditions used for electroless coating were optimized to obtain a uniform and continuous layer of copper. Using this method, it is possible to deposit up to about 25 wt% copper on the basalt fiber. The resultant composite fiber was characterized by scanning electron microscopy (SEM)/energy-dispersive X-ray (EDX) during and after the coating process. The effects of the thickness of copper coating on surface condition and also the tensile strength of the basalt fibers have been investigated. The study of surface condition of the coated basalt fibers by SEM showed that the copper coating at the thickness of about 0.2 μm had the best continuity on the basalt fibers. The results of tensile tests of basalt fibers coated with different thickness of copper showed that increasing the thickness of coating layer decreased the overall strength of fibers.展开更多
A method of copper removal from composite wires of copper stainless steel fibers by means of sulfuric acid solution with hydrogen dioxide is described. After removing copper, the stainless steel fibers remain smooth ...A method of copper removal from composite wires of copper stainless steel fibers by means of sulfuric acid solution with hydrogen dioxide is described. After removing copper, the stainless steel fibers remain smooth and uniform, keep high strength and are arranged in order. The copper sulfate with 5 H 2O (CuSO 4 5H 2O) can be crystallized directly from the reaction solution.展开更多
Cu（OH）2 nano-fibers were prepared by chemical precipitation with CuSO4·5H2O and NaOH as raw materials. The Cu（OH）2 nano-fibers have a diameter of 10-30 nm and a length of 1-6 μm. The reaction conditions were...Cu（OH）2 nano-fibers were prepared by chemical precipitation with CuSO4·5H2O and NaOH as raw materials. The Cu（OH）2 nano-fibers have a diameter of 10-30 nm and a length of 1-6 μm. The reaction conditions were as follows： the concentration of CuSO4 solution was 0.1 mol·L^-1,NaOH solution 4 mol·L^-1,the dropping rate of the NaOH solution 50 mL·min^-1,the reaction temperature 20℃the pH value of the reaction terminal 13,and the stirring rate 1200 r·min^-1. The chain nano-CuO grains were obtained through the microwave radiation of the Cu（OH）2 nano-fibers.展开更多
In this paper,the manufacturing of high-efficiency air filter paper is reported.The air filter paper was produced using ultra-fine fibers and wateroat fibers mercerized by alkali,using an electrospinning apparatus wit...In this paper,the manufacturing of high-efficiency air filter paper is reported.The air filter paper was produced using ultra-fine fibers and wateroat fibers mercerized by alkali,using an electrospinning apparatus with multiple rings.The high efficiency air filter paper has an antibacterial effect after adding a chitosan-copper complex which is harmless to humans.As a result of the measurement,the filtering efficiency of the air filter paper is approximately 99.998%and its antibacterial efficiency is approximately 99.5%.展开更多
基金Projects(50436010, 50605023, 50675070) supported by the National Natural Science Foundation of China
文摘Long metal fibers were manufactured in horizontal lathe with a multi-tooth tool. Based on the coarse antler surface structure of copper fibers, a new sintering technology was put forward to manufacture a kind of oriented linear copper fiber sintered felt. The sintering mechanism of oriented linear copper fiber sintered felt was studied. Compared with sintered copper-wire felt, the characteristics of sintered copper-fiber felts were analyzed in details. Owing to the coarse antler surface structure of copper fibers, oriented linear copper-fiber felt was sintered under the condition of micro/nano scale range, and copper fibers easily bonded together in the sintering process. Microchannels with micro-scale coarse antler surface structure were constructed. These characters give oriented linear copper fiber felt some new merits: high filtration accuracy, high flow capability, low resistance loss, good capability to resistance pressure, stable and uniform pore, high specific surface area. The properties of oriented linear copper fiber sintered felt were analyzed.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.51975218 and 51722504)the Science and Technology Plan of Guangdong Province(Grant Nos.2017A010104006 and 2017KZ010105)and the Special Support Plan of Guangdong Province(Grant No.2017TX04X141).
文摘The structure of current collectors has significant effects on the performance of a lithium-ion battery(LIB).In this study,we use copper fiber felts made by multi-tooth cutting and high-temperature solid-phase sintering as the current collector for LIBs.An integrated porous electrode based on CuO nanoflowers/copper fiber felt is developed for the anode.Results suggest that the reversible capacity and cycle stability of this new anode are significantly improved,compared with the pristine bare-surface copper plate under the same condition of rate cycles.The new anode structure based on the copper-fiber felt with a porosity of 60%exhibits a higher performance with an initial specific capacity of 609.5 mAh g^(-1)and retains 486.1 mAh g^(-1)after 200 cycles at a current density of 0.5 C.The improved electrochemical performance of this electrode is attributed to its large surface area of CuO nanoflowers and porous structure of the copper fiber felt,due to enhanced contact between the active material of CuO nanoflowers and electrolyte.This pore-rich structure makes the electrolyte easy to permeate into the electrode,shortens the diffusion path of Li^(+),reduces the internal resistance and alleviates the volume expansion of the active material during the insertion and desertion processes of Li^(+).
文摘The weak interface bonding of metal matrix reinforced by carbon fibers is the central problem of fabricating such composites. Depositing copper coating on carbon fibers is regarded as a feasible method to solve the problem. In this paper, copper coating has been deposited on the fibers through both electroless deposition and electroplating methods. Two kinds of complexing agents and two stabilizing agents are taken during the electroless plating process. The solution is stable, and little extraneous component is absorbed on the surface. After adding additive agents and increasing the concentration of H2SO4 to the acid cupric sulfate electrolyte, the "black core" during usual electroplating process is avoided. The quality of copper coating is analyzed using SEM and XRD, etc.
文摘Continuous carbon fiber reinforced copper matrix composites with 70%(volume fraction) of carbon fibers prepared by squeeze casting technique have been used for investigation of the coefficient of thermal expansion(CTE) and thermal conductivity.Thermo-physical properties have been measured in both,longitudinal and transversal directions to the fiber orientation.The results showed that Cf/Cu composites may be a suitable candidate for heat sinks because of its good thermo-physical properties e.g.the low CTE(4.18×10-6/K) in longitudinal orientation and(14.98×10-6/K) in transversal orientation at the range of 20-50℃,a good thermal conductivity(87.2 W/m·K) in longitudinal orientation and(58.2 W/m·K) in transversal orientation.Measured CTE and thermal conductivity values are compared with those predicted by several well-known models.Eshelby model gave better results for prediction of the CTE and thermal conductivity of the unidirectional composites.
文摘In this work, an electroless method of coating copper on the basalt short fibers using copper sulphate solution is described. In order to avoid any interfacial reactions in the basalt fiber reinforced metal matrix composites, the basalt fibers were coated with copper. The effects of the time of sensitization, activation, metallization, PdCl2 concentration, pH and temperature bath on the extent of copper coating on basalt fiber are reported. The conditions used for electroless coating were optimized to obtain a uniform and continuous layer of copper. Using this method, it is possible to deposit up to about 25 wt% copper on the basalt fiber. The resultant composite fiber was characterized by scanning electron microscopy (SEM)/energy-dispersive X-ray (EDX) during and after the coating process. The effects of the thickness of copper coating on surface condition and also the tensile strength of the basalt fibers have been investigated. The study of surface condition of the coated basalt fibers by SEM showed that the copper coating at the thickness of about 0.2 μm had the best continuity on the basalt fibers. The results of tensile tests of basalt fibers coated with different thickness of copper showed that increasing the thickness of coating layer decreased the overall strength of fibers.
文摘A method of copper removal from composite wires of copper stainless steel fibers by means of sulfuric acid solution with hydrogen dioxide is described. After removing copper, the stainless steel fibers remain smooth and uniform, keep high strength and are arranged in order. The copper sulfate with 5 H 2O (CuSO 4 5H 2O) can be crystallized directly from the reaction solution.
文摘Cu（OH）2 nano-fibers were prepared by chemical precipitation with CuSO4·5H2O and NaOH as raw materials. The Cu（OH）2 nano-fibers have a diameter of 10-30 nm and a length of 1-6 μm. The reaction conditions were as follows： the concentration of CuSO4 solution was 0.1 mol·L^-1,NaOH solution 4 mol·L^-1,the dropping rate of the NaOH solution 50 mL·min^-1,the reaction temperature 20℃the pH value of the reaction terminal 13,and the stirring rate 1200 r·min^-1. The chain nano-CuO grains were obtained through the microwave radiation of the Cu（OH）2 nano-fibers.
文摘In this paper,the manufacturing of high-efficiency air filter paper is reported.The air filter paper was produced using ultra-fine fibers and wateroat fibers mercerized by alkali,using an electrospinning apparatus with multiple rings.The high efficiency air filter paper has an antibacterial effect after adding a chitosan-copper complex which is harmless to humans.As a result of the measurement,the filtering efficiency of the air filter paper is approximately 99.998%and its antibacterial efficiency is approximately 99.5%.
