An Analysis of Contemporary Copper Recycling in China

Copper consumption increased very quickly in China in recent years,which could not be met by inland copper industry.In order to achieve a sustainable development of copper industry,an analysis of copper recycling in China was necessary.For the life cycle of copper products a copper-flow diagram with time factor was worked out and the contemporary copper recycling in China was analyzed,from which the following data were obtained.The average life cycle of copper products was 30 years.From 1998 to 2002,the use ratio of copper scraps in copper production,the use ratio of copper scraps in copper manufacture,the materials self-support ratio in copper production,and the materials self-support ratio in copper manufacture were 26.50%,15.49%,48.05% and 59.41%,respectively.The materials self-support ratios in copper production and manufacture declined year by year in recent years on the whole,and the latter dropped more quickly.The average index of copper ore and copper scrap from 1998 to 2002 were 0.8475 t/t and 0.0736 t/t,respectively;and copper resource efficiency was 1.1855 t/t.Some efforts should be paid to reduce copper ores consumption and promote copper scraps regeneration.Copper scraps were mostly imported from foreign countries because of shortage in recent years in China.Here the reasons related to copper scraps deficiency were also demonstrated.But we can forecast:when copper production was in a slow rise or in a steady state in China,the deficiency of copper scraps may be mitigated;when copper production was in a steady state for a very long time,copper scraps may become relatively abundant.According to the status of copper industry in China,the raw materials of copper production and manufacture have to depend on oversea markets heavily in recent years,and at the same time,the copper scraps using proportion and efficiency in copper industry should be improved.

Thick Target Neutron Production on Aluminum and Copper by 40 MeV Deuterons

The thick target neutron yields （TTNYs） of deuteron-induced reaction on AI and Cu isotopes are analyzed by combining the improved nuclear models and particle transport effects. The modified Glauber model is employed mainly to produce the peak of double differential cross section for the breakup process, and the exciton model and the Hauser-Feshbach theory are used for the statistical processes. The thin-layer accumulation method is used to calculate the TTNYs considering the neutron attenuation effects in the target. The calculated results are compared with the existing experimental data, and the analysis method can predict the TTNY data well at the deuteron energy of 40 MeV.

Analysis of Copper Processing Products Production and Copper Consumption in China

China is the world’s largest producer of copper processing products as well as the world’s largest copper consumer market.In 2013,China produced more than 13.60 million tons of copper processing products,accounting for60%of the world’s total production.Since then,this proportion has expanded year by year,and will increase to about 66.7%in 2016.Meanwhile,China consumed nearly 11

Identification and assessment of environmental burdens of Chinese copper production from a life cycle perspective

The environmental burdens of Chinese copper production have been identified and quantified in the context of typical technologies, materials supplies and environmental emissions by a life cycle approach. Primary and secondary copper production using copper ores and scraps, respectively, were analyzed in detail. The flash and bath smelting approaches and the recycling of copper scraps were selected as representative copper production processes. A quantitative analysis was also conducted to assess the influence of material transport distance in copper production. Life cycle assessment （LCA） results showed that resources depletion and human health contribute significantly to environmental burdens in Chinese copper production. In addition, the secondary copper production has dramatically lower environmental burdens than the primary production. There is no obvious distinction in overall environmental burdens in primary copper production by flash or bath smelting approach. However, resources depletion is lower and the damage to human health is higher for flash smelting approach. Ecosystem quality damage is slight for both approaches. Environ- mental burdens from the mining stage contribute most in all life cycle stages in primary copper production. In secondary copper production, the electrolytic refining stage dominates. Based on the life cycle assessment results, some suggestions for improving environmental performance were proposed to meet the sustainable development of Chinese copper industry.

PCDD/Fs emission, risk characterization, and reduction in China＇s secondary copper production industry

Secondary copper production is one of the key polychlorinated dibenzo-p-dioxins and dibenzofurans （PCDD/Fs） emission sources in China, but research and data on this issue are rare. In 2004, when the Stockholm Convention entered into force in China, PCDD/Fs emissions from secondary copper production contributed to 32.2% of the total release. In this paper, PCDD/Fs emission dynamics from secondary copper industry were discussed and cumulative risks were characterized. From 2004 to 2009, industrial policies played an indirect role in PCDD/Fs reduction, but its effects are still limited. The Yangtze River Delta, Pearl River Delta and central regions were among the top three of dioxin emissions from secondary copper production in China. Shanghai, Shan- dong, Zhejiang, and Jiangxi had comparatively higher accumulated risk and were recommended as the priority regions for promoting PCDD/Fs emission control in China. From 2009 to 2015, the PCDD/Fs emission dynamics in the secondary copper industry were presented through simulation. PCDD/Fs emission equations were established, resulting in the recommendation of control technology conversion rate at 30% for small scale smelters and 51%- 57% for large and medium-sized enterprises in 2015. In conclusion, both indirect policy and direct control technology retrofitting should be integrated for more effective PCDD/Fs emission reduction in secondary copper industry.

Huangshi Plans to Build a RMB One-hundred-billion Copper Product Industry Within Three Years

On the June 5,the 2018 Annual Conference of China Copper Processing Industry was convened in Huangshi,joined by representatives of 232 copper processing companies and more than 20 universities and research institutes from across the country to discuss the high quality development plan of the copper industry.The conference。