Mg2＋ and PO43＋ were added into the synthetic wastewater, leading to the dissociation of the complex ions in the wastewater, and resulting in removal of copper and ammonia therein. The effects of agents addition amo...Mg2＋ and PO43＋ were added into the synthetic wastewater, leading to the dissociation of the complex ions in the wastewater, and resulting in removal of copper and ammonia therein. The effects of agents addition amount, pH, and reaction time on the removal efficiency of copper and ammonia were investigated. In particular, two-sectional struvite formation （TSSF） process was established for copper and ammonia removal. MgCl2 and Na2HPO4 were added by following 90% addition in the first section and remained 10% in the second during the TSSF process. Compared with one sectional struvite formation, TSSF possessed much better performance. Under condition of n（NH3-N）：n（Mg）：n（P）=1：1.2：1.5 （molar ratio）, pH=9, and reaction time of 30 min, the removal efficiencies of copper and ammonia were 98.9% and 99.96%, respectively. The enhanced performance of TSSF is explained by the competition of ammonia by copper？ammonia complexes and struvite. The dissociation of copper-ammonia complexes is further demonstrated by thermodynamic equilibrium analysis, on the basis of calculations and establishment of predominance phases diagram. Moreover, XRD and EDS analyses further confirmed the formation of struvite and precipitation of copper, which prove the transmission of copper and ammonia from liquid phase into solid phase.展开更多
Heavy metals and ammonia are difficult to remove from wastewater,as they easily combine into refractory complexes.The struvite formation method（SFM） was applied for the complex decomposition and simultaneous removal...Heavy metals and ammonia are difficult to remove from wastewater,as they easily combine into refractory complexes.The struvite formation method（SFM） was applied for the complex decomposition and simultaneous removal of heavy metal and ammonia.The results indicated that ammonia deprivation by SFM was the key factor leading to the decomposition of the copper-ammonia complex ion.Ammonia was separated from solution as crystalline struvite,and the copper mainly co-precipitated as copper hydroxide together with struvite.Hydrogen bonding and electrostatic attraction were considered to be the main surface interactions between struvite and copper hydroxide.Hydrogen bonding was concluded to be the key factor leading to the co-precipitation.In addition,incorporation of copper ions into the struvite crystal also occurred during the treatment process.展开更多
基金Project(51674305)supported by the National Natural Science Foundation of ChinaProject(2013WK2007)supported by the Key Project of Science and Technology of Hunan Province,China+1 种基金Project(2015CX001)supported by the Innovation Stimulating Program of Central South University,ChinaKey Project(1602FKDC007)supported by Science and Technology Program of Gansu Province,China
文摘Mg2＋ and PO43＋ were added into the synthetic wastewater, leading to the dissociation of the complex ions in the wastewater, and resulting in removal of copper and ammonia therein. The effects of agents addition amount, pH, and reaction time on the removal efficiency of copper and ammonia were investigated. In particular, two-sectional struvite formation （TSSF） process was established for copper and ammonia removal. MgCl2 and Na2HPO4 were added by following 90% addition in the first section and remained 10% in the second during the TSSF process. Compared with one sectional struvite formation, TSSF possessed much better performance. Under condition of n（NH3-N）：n（Mg）：n（P）=1：1.2：1.5 （molar ratio）, pH=9, and reaction time of 30 min, the removal efficiencies of copper and ammonia were 98.9% and 99.96%, respectively. The enhanced performance of TSSF is explained by the competition of ammonia by copper？ammonia complexes and struvite. The dissociation of copper-ammonia complexes is further demonstrated by thermodynamic equilibrium analysis, on the basis of calculations and establishment of predominance phases diagram. Moreover, XRD and EDS analyses further confirmed the formation of struvite and precipitation of copper, which prove the transmission of copper and ammonia from liquid phase into solid phase.
基金supported by the National Natural Science Foundation of China(No.51204213)the Key Project of Science and Technology of Hunan Province(No.2013WK2007)the Innovation Stimulating Program of Central South University(No.2015CX001)
文摘Heavy metals and ammonia are difficult to remove from wastewater,as they easily combine into refractory complexes.The struvite formation method（SFM） was applied for the complex decomposition and simultaneous removal of heavy metal and ammonia.The results indicated that ammonia deprivation by SFM was the key factor leading to the decomposition of the copper-ammonia complex ion.Ammonia was separated from solution as crystalline struvite,and the copper mainly co-precipitated as copper hydroxide together with struvite.Hydrogen bonding and electrostatic attraction were considered to be the main surface interactions between struvite and copper hydroxide.Hydrogen bonding was concluded to be the key factor leading to the co-precipitation.In addition,incorporation of copper ions into the struvite crystal also occurred during the treatment process.
