Effect of Elastic Strains on Adsorption Energies of C,H and O on Transition Metal Oxides

Platinum(Pt)-based noble metal catalysts(PGMs)are the most widely used commercial catalysts,but they have the problems of high cost,low reserves,and susceptibility to small-molecule toxicity.Transition metal oxides(TMOs)are regarded as potential substitutes for PGMs because of their stability in oxidizing environments and excellent catalytic performance.In this study,comprehensive investigation into the influence of elastic strains on the adsorption energies of carbon(C),hydrogen(H)and oxygen(O)on TMOs was conducted.Based on density functional theory(DFT)calculations,these effects in both tetragonal structures(PtO_(2),PdO_(2))and hexagonal structures(ZnO,CdO),along with their respective transition metals were systematically explored.It was identified that the optimal adsorption sites on metal oxides pinpointed the top of oxygen or the top of metal atom,while face-centered cubic(FCC)and hexagonal close-packed(HCP)holes were preferred for the transition metals.Furthermore,under the influence of elastic strains,the results demonstrated significant disparities in the adsorption energies of H and O between oxides and transition metals.Despite these differences,the effect of elastic strains on the adsorption energies of C,H and O on TMOs mirrored those on transition metals:adsorption energies increased under compressive strains,indicating weaker adsorption,and decreased under tension strains,indicating stronger adsorption.This behavior was rationalized based on the d-band model for adsorption atop a metallic atom or the p-band model for adsorption atop an oxygen atom.Consequently,elastic strains present a promising avenue for tailoring the catalytic properties of TMOs.

Advancements in transition bimetal catalysts for electrochemical 5-hydroxymethylfurfural(HMF) oxidation

The electrochemical oxidation of 5-hydroxymethylfurfural(HMF) represents a significant avenue for sustainable chemical synthesis, owing to its potential to generate high-value derivatives from biomass feedstocks. Transition metal catalysts offer a cost-effective alternative to precious metals for catalyzing HMF oxidation, with transition bimetallic catalysts emerging as particularly promising candidates. In this review, we delve into the intricate reaction pathways and electrochemical mechanisms underlying HMF oxidation, emphasizing the pivotal role of transition bimetallic catalysts in enhancing catalytic efficiency. Subsequently, various types of transition bimetallic catalysts are explored, detailing their synthesis methods and structural modulation strategies. By elucidating the mechanisms behind catalyst modification and performance enhancement, this review sets the stage for upcoming advancements in the field, ultimately advancing the electrochemical HMF conversion and facilitating the transition towards sustainable chemical production.

An effective strategy of constructing multi-metallic oxides of ZnO/ CoNiO_(2)/CoO/C microflowers for improved supercapacitive performance

In this work,a new ZnO/CoNiO_(2)/CoO/C metal oxides composite is prepared by cost-effective hydrothermal method coupled with annealing process under N_(2) atmosphere.Notably,the oxidation-defect annealing environment is conducive to both morphology and component of the composite,which flower-like ZnO/CoNiO_(2)/CoO/C is obtained.Benefited from good chemical stability of ZnO,high energy capacity of CoNiO_(2) and CoO and good conductivity of C,the as-prepared sample shows promising electrochemical behavior,including the specific capacity of 1435 C·g^(-1) at 1 A·g^(-1),capacity retention of 87.3%at 20 A·g^(-1),and cycling stability of 90.5%for 3000 cycles at 5 A·g^(-1),respectively.Furthermore,the prepared ZnO/CoNiO_(2)/CoO/C/NF//AC aqueous hybrid supercapacitors device delivers the best specific energy of 55.9 W·h·kg^(-1) at 850 W·kg^(-1).The results reflect that the as-prepared ZnO/CoNiO_(2)/CoO/C microflowers are considered as high performance electrode materials for supercapacitor,and the strategy mentioned in this paper is benefit to prepare mixed metal oxides composite for energy conversion and storage.

Activation of Transition Metal(Fe,Co and Ni)-Oxide Nanoclusters by Nitrogen Defects in Carbon Nanotube for Selective CO_(2) Reduction Reaction

The electrochemical carbon dioxide reduction reaction(CO_(2)RR),which can produce value-added chemical feedstocks,is a proton-coupled-electron process with sluggish kinetics.Thus,highly efficient,cheap catalysts are urgently required.Transition metal oxides such as CoO_(x),FeO_(x),and NiO_(x)are low-cost,low toxicity,and abundant materials for a wide range of electrochemical reactions,but are almost inert for CO_(2)RR.Here,we report for the first time that nitrogen doped carbon nanotubes(N-CNT)have a surprising activation effect on the activity and selectivity of transition metal-oxide(MO_(x)where M=Fe,Ni,and Co)nanoclusters for CO_(2)RR.MO_(x)supported on N-CNT,MO_(x)/N-CNT,achieves a CO yield of 2.6–2.8 mmol cm−2 min−1 at an overpotential of−0.55 V,which is two orders of magnitude higher than MO_(x)supported on acid treated CNTs(MO_(x)/O-CNT)and four times higher than pristine N-CNT.The faraday efficiency for electrochemical CO_(2)-to-CO conversion is as high as 90.3%at overpotential of 0.44 V.Both in-situ XAS measurements and DFT calculations disclose that MO_(x)nanoclusters can be hydrated in CO_(2)saturated KHCO_(3),and the N defects of N-CNT effectively stabilize these metal hydroxyl species under carbon dioxide reduction reaction conditions,which can split the water molecules and provide local protons to inhibit the poisoning of active sites under carbon dioxide reduction reaction conditions.

Role of transition metal oxides in g-C_(3)N_(4)-based heterojunctions for photocatalysis and supercapacitors

g-C_(3)N_(4) emerges as a star 2D photocatalyst due to its unique layered structure,suitable band structure and low cost.However,its photocatalytic application is limited by the fast charge recombination and low photoabsorption.Rationally designing g-C_(3)N_(4)-based heterojunction is promising for improving photocatalytic activity.Besides,g-C_(3)N_(4) exhibits great potentials in electrochemical energy storage.In view of the excellent performance of typical transition metal oxides(TMOs)in photocatalysis and energy storage,this review summarized the advances of TMOs/g-C_(3)N_(4) heterojunctions in the above two areas.Firstly,we introduce several typical TMOs based on their crystal structures and band structures.Then,we summarize different kinds of TMOs/g-C_(3)N_(4) heterojunctions,including type Ⅰ/Ⅱ heterojunction,Z-scheme,p-n junction and Schottky junction,with diverse photocatalytic applications(pollutant degradation,water splitting,CO_(2) reduction and N_(2) fixation)and supercapacitive energy storage.Finally,some promising strategies for improving the performance of TMOs/g-C_(3)N_(4) were proposed.Particularly,the exploration of photocatalysis-assisted supercapacitors was discussed.

MICROSTRUCTURE AND INFRARED EMISSIVITY AT NORMAL TEMPERATURE IN TRANSITIONAL METAL OXIDES SYSTEM CERAMICS

The fabrication of Fe2O3-MnO2-Co2O3-CuO system ceramics, and the composite system ceramics of transitional metal oxides-cordierite and transitional metal oxides-kaolinit are presented in this work. The research was carried out with the main attention to the infrared emissivity in the band of 8 similar to 14 mu m at room temperature, the microstructure of the ceramics and the relation between them. High infrared emissivities exceeding 0.9 in the band of 8 similar to 14 mu m at room temperature were gained in the transitional metal oxide ceramics and the composite system ceramics. It is suggested that the formation of inverse spinels and partially inverse spinels, such as Fe3O4, CoFe2O4, CuFe2O4 and CuMn2O4, is beneficial to the enhancement of the infrared emissivity of the transitional metal oxide ceramics. The transitional metal oxides play an important role in determining the infrared emissivity of the composite system ceramics.

Recent advances in pseudocapacitor electrode materials: Transition metal oxides and nitrides

Faraday pseudocapacitors take both advantages of secondary battery with high energy density and supercapacitors with high power density,and electrode material is the key to determine the performance of Faraday pseudocapacitors.Transition metal oxides and nitrides,as the two main kinds of pseudocapacitor electrode materials,can enhance energy density while maintaining high power capability.Recent advances in designing nanostructured architectures and preparing composites with high specific surface areas based on transition metal oxides and nitrides,including ruthenium oxides,nickel oxides,manganese oxides,vanadium oxides,cobalt oxides,iridium oxides,titanium nitrides,vanadium nitrides,molybdenum nitrides and niobium nitrides,are addressed,which would provide important significances for deep researches on pseudocapacitor electrode materials.

Recent progress on transition metal oxides and carbon-supported transition metal oxides as catalysts for thermal decomposition of ammonium perchlorate

As a main oxidizer in solid composite propellants,ammonium perchlorate(AP)plays an important role because its thermal decomposition behavior has a direct influence on the characteristic of solid composite propellants.To improve the performance of solid composite propellant,it is necessary to take measures to modify the thermal decomposition behavior of AP.In recent years,transition metal oxides and carbon-supported transition metal oxides have drawn considerable attention due to their extraordinary catalytic activity.In this review,we highlight strategies to enhance the thermal decomposition of AP by tuning morphology,varying the types of metal ion,and coupling with carbon analogue.The enhanced catalytic performance can be ascribed to synergistic effect,increased surface area,more exposed active sites,and accelerated electron transportation and so on.The mechanism of AP decomposition mixed with catalyst has also been briefly summarized.Finally,a conclusive outlook and possible research directions are suggested to address challenges such as lacking practical application in actual formulation of solid composite propellant and batch manufacturing.

Effective modification of MgO with surface transition metal oxides for NF_3 decomposition

NF3 decomposition over transition metal oxides coated MgO reagents in the absence of water is investigated. The results show that NF3 can be decomposed completely over pure MgO but the time of NF3 steady full conversion kept as short as 80 min, while the reactivities of coated MgO reagents were remarkably enhanced by transition metal oxides, for example the time of NF3 complete conversion over 12%Fe/MgO extended to 380 min. It is suggested that not only an increase in surface area but also a significant enhancement in the fluorination of MgO substrate caused by the surface transition metal oxides result in an improved reactivity of coated MgO reagents for NF3 decomposition.

Effect of Crystallinity on Electrochemical Insertion/Extraction of Li in Transition Metal Oxides Part I: LiMn_2O_4 and LiCo_(0.5)Ni_(0.5)O_2

Electrochemical insertion/extraction of Li on cathode materials of spinel type LiMn2O4 and ordered rock-salt type LiCo0.5 Ni0.5O2 was measured on samples of which structures were well characterized. On the basis of experimental results on structure, morphology and charge-discharge characteristics, the effect of crystallinity of the cathode materiaIs on electrochemical Li insertion/extraction performance was discussed. These two transition metal oxides belong to onegroup that the crystallinity of these oxides affects to the performance.

Effect of Crystallinity on Electrochemical Insertion/Extraction of Li in Transition Metal Oxides Part Ⅱ: TiO_2, V_2O_5 and MoO_3

Electrochemical insertion/extraction of Li on cathode materials of anatase type TiO_2, quasilayered structure V_2O_5 and layered structure MoO_3 was measured on samples of which structures were well characterized and showed a wide range of crystallinity. On the basis of experimental results on structure, morphology and charge-discharge characteristics, the effect of crystallinity of the cathode materials on electrochemical Li insertion/extraction pedermance was discussed. These three transition metal oxides were classified as one group on the basis of whether the crystallinity of these oxides affects to the performance or not; LiMn_2O_4 and LiCo_(0.5)O_2 belongs to the former group and TiO_2, V_2O_5 and MoO_3 to the latter.

Catalytic removal of volatile organic compounds using ordered porous transition metal oxide and supported noble metal catalysts

Most of volatile organic compounds （VOCs） are harmful to the atmosphere and human health. Cata‐lytic combustion is an effective way to eliminate VOCs. The key issue is the availability of high per‐formance catalysts. Many catalysts including transition metal oxides, mixed metal oxides, and sup‐ported noble metals have been developed. Among these catalysts, the porous ones attract much attention. In this review, we focus on recent advances in the synthesis of ordered mesoporous and macroporous transition metal oxides, perovskites, and supported noble metal catalysts and their catalytic oxidation of VOCs. The porous catalysts outperformed their bulk counterparts. This excel‐lent catalytic performance was due to their high surface areas, high concentration of adsorbed oxy‐gen species, low temperature reducibility, strong interaction between noble metal and support and highly dispersed noble metal nanoparticles and unique porous structures. Catalytic oxidation of carbon monoxide over typical catalysts was also discussed. We made conclusive remarks and pro‐posed future work for the removal of VOCs.

Protonated and layered transition metal oxides as solid acids for dehydration of biomass-based fructose into 5-hydroxymethylfurfural

A serial of protonated and layered transition metal oxides, including layered HTaWO6, HNbMoO6 as well as HNbWO6, were synthesized by solid-state reaction and ion-exchange. The layered HTaWO6 has been systematically studied as a solid acid to realize the dehydration of fructose to 5-hydroxymethylfurfural (HMF). The transition metal oxide samples were characterized with ICP-OES, EDS, XRD, XPS, SEM, TGA, FT-IR, N-2 adsorption-desorption and NH3-TPD. The influential factors such as reaction temperature, reaction time, solvent, catalyst amount and substrate concentration were deeply investigated. The optimized fructose conversion rate of 99% with HMF yield of 67% were achieved after 30 min at 140 degrees C in dimethylsulfoxide. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Catalysis of Active Carbon Supporting Transition Metal Oxides for Pyrotechnical Reagent with Potassium Perchlorate

In order to improve the pyrotechnical reagent with potassium perchlorate,composite catalyst of active carbon supporting transition metal oxides （TMO）,Fe2O3 and CuO,were prepared and added into pyrotechnical reagent with potassium perchlorate.Accelerating rate calorimeter （ARC） was used to study the catalysis of pyrotechnical reagent which is consisted of potassium perchlorate and composite catalyst.Composite catalyst of both Fe2O3 and CuO supported by active carbon can catalyze pyrotechnical reagent with potassium perchlorate.Furthermore,it can lower the apparent activation energy and accelerate the reaction with a smaller quantity than that with Fe2O3 and CuO.The maximal reaction rate of pyrotechnical reagent with potassium perchlorate mixed with Fe2O3/active carbon and CuO/active carbon is 8.31 min-1 and 9.13 min-1,which is 1.74 times and 1.91 times of pyrotechnical reagent mixed with no catalyst;time to maximal rate was 18.99 min and 1.96 min respectively,which is lower than pyrotechnical reagent mixed with no catalyst by 86.46% and 98.67% ;the apparent activation energy is 368.10 kJ·mol-1 and 325.29 kJ·mol-1,which is lower than pyrotechnical reagent mixed with no catalyst by 31.89% and 39.81% respectively.

Electron Donating Property and Catalytic Activity ofPerovskite-type Mixed Oxides (ABO_3) Consisting of Rare Earth and 3d Transition Metals

The catalytic activity of Perovskite-type mixed oxides (LaCoO3, PrCoO3 and SmCoO3) for the reduction of cyclohexanone to cyclohexanol with 2-propanol (Meerwein-PonndorfVerley reduction) has been studied. The data have been correlated with the surface electron donor properties of these mixed oxides

Sodium-treated sepiolite-supported transition metal(Cu,Fe,Ni,Mn,or Co)catalysts for HCHO oxidation

Sodium-treated sepiolite(Na Sep)-supported transition metal catalysts(TM/Na Sep;TM = Cu, Fe, Ni, Mn, and Co) were synthesized via a rotary evaporation method. Physicochemical properties of the as-synthesized samples were characterized by means of various techniques, and their catalytic activities for HCHO(0.2%) oxidation were evaluated. Among the samples, Cu/Na Sep exhibited superior performance, and complete HCHO conversion was achieved at 100 ℃(GHSV = 240000 m L/(g·h)). Additionally, the sample retained good catalytic activity during a 42 h stability test. A number of factors, including elevated acidity, the abundance of oxygen species, and favorable low-temperature reducibility, were responsible for the excellent catalytic activity of Cu/Na Sep. According to the results of the in-situ DRIFTS characterization, the HCHO oxidation mechanism was as follows:(i) HCHO was rapidly decomposed into dioxymethylene(DOM) species on the Cu/Na Sep surface;(ii) DOM was then immediately converted to formate species;(iii) the resultant formate species were further oxidized to carbonates;(iv) the carbonate species were eventually converted to CO2 and H2O.

Interior and Exterior Decoration of Transition Metal Oxide Through Cu^(0)/Cu^(+) Co-Doping Strategy for High-Performance Supercapacitor

Although CoO is a promising electrode material for supercapacitors due to its high theoretical capacitance,the practical applications still suffering from inferior electrochemical activity owing to its low electrical conductivity,poor structural stability and inefficient nanostructure.Herein,we report a novel Cu0/Cu+co-doped CoO composite with adjustable metallic Cu0 and ion Cu+via a facile strategy.Through interior(Cu+)and exterior(Cu0)decoration of CoO,the electrochemical performance of CoO electrode has been significantly improved due to both the beneficial flower-like nanostructure and the synergetic effect of Cu0/Cu+co-doping,which results in a significantly enhanced specific capacitance(695 F g^(-1) at 1 A g^(-1))and high cyclic stability(93.4%retention over 10,000 cycles)than pristine CoO.Furthermore,this co-doping strategy is also applicable to other transition metal oxide(NiO)with enhanced electrochemical performance.In addition,an asymmetric hybrid supercapacitor was assembled using the Cu0/Cu+co-doped CoO electrode and active carbon,which delivers a remarkable maximal energy density(35 Wh kg^(-1)),exceptional power density(16 kW kg^(-1))and ultralong cycle life(91.5%retention over 10,000 cycles).Theoretical calculations further verify that the co-doping of Cu^(0)/Cu^(+)can tune the electronic structure of CoO and improve the conductivity and electron transport.This study demonstrates a facile and favorable strategy to enhance the electrochemical performance of transition metal oxide electrode materials.

A new approach for the aerobic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid without using transition metal catalysts

The organic compound 2,5-furandicarboxylic acid（FDCA） has been identified by the US Department of Energy（DOE） as a valuable platform chemical for a wide range of industrial applications. Currently, the most popular route for FDCA synthesis is reported to be the oxidation of 5-hydroxymethylfurfural（HMF）by O_2 over the catalysis of noble metals（e.g., Au, Pt, Ru, and Pd）. However, the high costs of noble metal catalysts remain a major barrier for producing FDCA at an industrial scale. Herein, we report a transition metal-free synthesis strategy for the oxidation of HMF to FDCA under O_2 or ambient air. A simple but unprecedented process for the aerobic oxidation of HMF was carried out in organic solvents using only bases as the promoters. According to the high performance liquid chromatography（HPLC） analysis, excellent product yield（91%） was obtained in the presence of NaOH in dimethylformamide（DMF） at room temperature（25 ℃）. A plausible mechanism for the NaOH-promoted aerobic oxidation of HMF in DMF is also outlined in this paper. After the reaction, the sodium salt of FDCA particles were dispersed in the reaction mixture, making it possible for product separation and solvent reuse. The new HMF oxidation approach is expected to be a practical alternative to current ones, which depend on the use of noble metal catalysts.

Mononuclear first-row transition-metal complexes as molecular catalysts for water oxidation

Water oxidation is significant in both natural and artificial photosynthesis.In nature,water oxidation occurs at the oxygen‐evolving center of photosystem II,and leads to the generation of oxygen,protons,and electrons.The last two are used for fixation of carbon dioxide to give carbohydrates.In artificial processes,the coupling of water oxidation to evolve O2and water reduction to evolve H2is known as water splitting,which is an attractive method for solar energy conversion and storage.Because water oxidation is a thermodynamically uphill reaction and is kinetically slow,this reaction causes a bottleneck in large‐scale water splitting.As a consequence,the development of new and efficient water oxidation catalysts(WOCs)has attracted extensive attention.Recent efforts have identified a variety of mononuclear earth‐abundant transition‐metal complexes as active and stable molecular WOCs.This review article summarizes recent progress in research on mononuclear catalysts that are based on first‐row transition‐metal elements,namely manganese,iron,cobalt,nickel,and copper.Particular attention is paid to catalytic mechanisms and the key O?O bond formation steps.This information is critical for designing new catalysts that are highly efficient and stable.

Density Functional Theory Studies on the Mechanism of Activation Formic Acid Catalyzed by Transition Metal Oxide MoO

This paper systematically studies the reaction mechanisms of formic acid catalyzed by transition metal oxide MoO. Three different reaction pathways of Routes I, Ⅱ and Ⅲ were found through studying the reaction mechanism of transition metal oxide MoO catalyzing the formic acid. The transition metal oxide MoO interacts with the C=O double bond to form chiral chain compounds（Routes I and Ⅱ） and metallic compound MoOH2（Route Ⅲ）. In this paper, we have studied the mechanisms of two addition reaction pathways and hydrogen abstraction reaction pathway. Routes I and Ⅱ are both addition reactions, and their products are two different chiral compounds MoO3CH2, which are enantiomeric to each other. In Route Ⅲ, metal compounds MoOH2 and CO2 are obtained from the hydrogen abstraction reaction. Among them, the hydrogen abstraction reaction occurring in Route Ⅲ is more likely to occur than the others. By comparing the results of previous studies on the reaction of MxOy-＋ ROH（M= Mo,W; R = Me, Et）, we found that the hydrogen abstraction mechanism is completely different from the mechanism of oxygen-containing organic compound catalyzed by MxOy.