Micro prism film used in LCD industry can be manufactured by roll to roll method with copper-plated roll mold. As copper-plated roll mold is getting larger, pitch error is getting severer. The pitch error drops the qu...Micro prism film used in LCD industry can be manufactured by roll to roll method with copper-plated roll mold. As copper-plated roll mold is getting larger, pitch error is getting severer. The pitch error drops the quality of micro prism film. The main cause of the pitch error was investigated during machining large roll mold whose machined length was 1 200 mm. The temperature of machining system was elevated during machining roll mold, and this elevation induced thermal expansion of the system. The temperature variation around the roll mold also made thermal expansion of the roll mold. The amount of thermal expansion had strong relationship to the amount of pitch error. Therefore, the roll mold was machined after warming-up of machining system and precise temperature controller around copper-plated roll mold was installed, which minimized the temperature variation. Finally, precise micro prism patterns without pitch error were machined on the large roll mold.展开更多
A mixture of five commonly used pharmaceuticals and personal care products （PPCPs） was degraded using a new combined catalyst under visible light irradiation. Scanning electron microscopy and X-ray diffraction analy...A mixture of five commonly used pharmaceuticals and personal care products （PPCPs） was degraded using a new combined catalyst under visible light irradiation. Scanning electron microscopy and X-ray diffraction analysis revealed that the combined catalyst was composed of copper-plating iron doped Cu2O （FeCu/Cu2O）. Compared with the Fe/C inner micro-circuit, the electric currents flowing between Cu and Fe increase the speed of anodic Fe dissolution. Moreover, due to the photochemical properties, Cu2O can accelerate the PPCPs degradation processes under the irradiation of visible light. In addition, shaking increased the dissolved oxygen concentration in the solution, which not only preconditioned the photo-catalysis reaction, but also set the stage for Fe reduction. According to the experimental results, we propose the possible reaction mechanism of the reaction.展开更多
基金Project (2010-0008-277) supported by NCRC (National Core Research Center) Program through the National Research Foundation of Korea funded by the Ministry of Education, Science and Technology, Korea
文摘Micro prism film used in LCD industry can be manufactured by roll to roll method with copper-plated roll mold. As copper-plated roll mold is getting larger, pitch error is getting severer. The pitch error drops the quality of micro prism film. The main cause of the pitch error was investigated during machining large roll mold whose machined length was 1 200 mm. The temperature of machining system was elevated during machining roll mold, and this elevation induced thermal expansion of the system. The temperature variation around the roll mold also made thermal expansion of the roll mold. The amount of thermal expansion had strong relationship to the amount of pitch error. Therefore, the roll mold was machined after warming-up of machining system and precise temperature controller around copper-plated roll mold was installed, which minimized the temperature variation. Finally, precise micro prism patterns without pitch error were machined on the large roll mold.
基金supported by the National Natural Science Foundation of China as a Youth Fund Project (No.41001340)the Ministry of Science and Technology,People’s Republic of China as a Special Project (No.2008ZX07526-002-01)the China Postdoctoral Science Foundation as a General Project (No. 20100471487)
文摘A mixture of five commonly used pharmaceuticals and personal care products （PPCPs） was degraded using a new combined catalyst under visible light irradiation. Scanning electron microscopy and X-ray diffraction analysis revealed that the combined catalyst was composed of copper-plating iron doped Cu2O （FeCu/Cu2O）. Compared with the Fe/C inner micro-circuit, the electric currents flowing between Cu and Fe increase the speed of anodic Fe dissolution. Moreover, due to the photochemical properties, Cu2O can accelerate the PPCPs degradation processes under the irradiation of visible light. In addition, shaking increased the dissolved oxygen concentration in the solution, which not only preconditioned the photo-catalysis reaction, but also set the stage for Fe reduction. According to the experimental results, we propose the possible reaction mechanism of the reaction.
