Drilling speed and associated analyses from factual field data of hydraulic rotary drilling have not been fully utilized.The paper provides the reference and comparison for the utilization of drilling information from...Drilling speed and associated analyses from factual field data of hydraulic rotary drilling have not been fully utilized.The paper provides the reference and comparison for the utilization of drilling information from two adjacent vertical drillholes that were formed with the same hydraulic rotary drilling machine and bit.The analysis of original factual data is presented to obtain the constant drilling speed during net drilling process.According to the factual data along two adjacent drillholes,the digitalization results respectively include 461 linear zones and 210 linear zones with their constant drilling speeds and associated drilling parameters.The digitalization results can accurately present the spatial distributions and interface boundaries of drilled geomaterials and the results are consistent with the paralleled site loggings.The weighted average drilling speeds from 2.335 m/min to 0.044 m/min represent 13 types of drilled geomaterials from soils to hard rocks.The quantitative relation between drilling speed and strength property is provided.The digitalization results can statistically profile the basic strength quality grades of III to VI from soils to hard rocks.The thickness distributions of four strength quality grades are presented for each individual type of geomaterials along two drillholes.In total,50.2%of geomaterials from drillhole A are grade IV and 57.4%of geomaterials from drillhole B are grade III.The digitalization results can offer an accurate and cost-effective tool to quantitatively describe the spatial distribution and in situ strength profile of drilled geomaterials in the current drilling projects.展开更多
In many engineering applications such as mining,geotechnical and petroleum industries,drilling operation is widely used.The drilling operation produces sound by-product,which could be helpful for preliminary estimatio...In many engineering applications such as mining,geotechnical and petroleum industries,drilling operation is widely used.The drilling operation produces sound by-product,which could be helpful for preliminary estimation of the rock properties.Nevertheless,determination of rock properties is very difficult by the conventional methods in terms of high accuracy,and thus it is expensive and timeconsuming.In this context,a new technique was developed based on the estimation of rock properties using dominant frequencies from sound pressure level generated during diamond core drilling operations.First,sound pressure level was recorded and sound signals of these sound frequencies were analyzed using fast Fourier transform (FFT).Rock drilling experiments were performed on five different types of rock samples using computer numerical control (CNC) drilling machine BMV 45 T20.Using simple linear regression analysis,mathematical equations were developed for various rock properties,i.e.uniaxial compressive strength,Brazilian tensile strength,density,and dominant frequencies of sound pressure level.The developed models can be utilized at early stage of design to predict rock properties.展开更多
The rock uniaxial compressive strength(UCS)is the basic parameter for support designs in underground engineering.In particular,the rock UCS should be obtained rapidly for underground engineering with complex geologica...The rock uniaxial compressive strength(UCS)is the basic parameter for support designs in underground engineering.In particular,the rock UCS should be obtained rapidly for underground engineering with complex geological conditions,such as soft rock,fracture areas,and high stress,to adjust the excavation and support plan and ensure construction safety.To solve the problem of obtaining real-time rock UCS at engineering sites,a rock UCS forecast idea is proposed using digital core drilling.The digital core drilling tests and uniaxial compression tests are performed based on the developed rock mass digital drilling system.The results indicate that the drilling parameters are highly responsive to the rock UCS.Based on the cutting and fracture characteristics of the rock digital core drilling,the mechanical analysis of rock cutting provides the digital core drilling strength,and a quantitative relationship model(CDP-UCS model)for the digital core drilling parameters and rock UCS is established.Thus,the digital core drilling-based rock UCS forecast method is proposed to provide a theoretical basis for continuous and quick testing of the surrounding rock UCS.展开更多
Making full use of modern analytical and testing techniques to explore and establish new indexes or methods for extracting paleoseawater geochemical information from sediments will help to reconstruct the sedimentary ...Making full use of modern analytical and testing techniques to explore and establish new indexes or methods for extracting paleoseawater geochemical information from sediments will help to reconstruct the sedimentary paleoenvironment in different research areas.The connection between the subsidence of the South China Sea basin and the uplift of the Tibetan Plateau has been a scientific concern in recent decades.To explore the information on the sedimentary paleoenvironment,provenance changes and uplift of Tibetan Plateau contained in core sediments(debris),we selected core samples from Well LS33 in the Qiongdongnan Basin,South China Sea,and analyzed the contents of typical elements(Al,Th,and rare earth elements)that can indicate changes in provenance and the Sr isotopic compositions,which can reveal the geochemical characteristics of the paleoseawater depending on the type of material(authigenic carbonate and terrigenous detritus).The results show the following:(1)during the late Miocene,the Red River transported a large amount of detrital sediments from the ancient continental block(South China)to the Qiongdongnan Basin.(2)The authigenic carbonates accurately record changes in the 87Sr/86Sr ratios in the South China Sea since the Oligocene.These ratios reflect the semi-closed marginal sea environment of the South China Sea(relative to the ocean)and the sedimentary paleoenvironment evolution process of the deep-water area of the Qiongdongnan Basin from continental to transitional and then to bathyal.(3)Since the Neogene,the variations in the 87Sr/86Sr ratio in the authigenic carbonates have been consistent with the variations in the uplift rate of the Tibetan Plateau and the sediment accumulation rate in the Qiongdongnan Basin.These consistent changes indicate the complex geological process of the change in the rock weathering intensity and terrigenous Sr flux caused by changes in the uplift rate of the Tibetan Plateau,which influence the Sr isotope composition of seawater.展开更多
Both evolution of the Asian monsoon system and the Cenozoic global cooling are thought to be closely linked to the Himalayan—Tibetan orogen. The South China Sea (SCS) with its high sedimentation rates of carbonate\|r...Both evolution of the Asian monsoon system and the Cenozoic global cooling are thought to be closely linked to the Himalayan—Tibetan orogen. The South China Sea (SCS) with its high sedimentation rates of carbonate\|rich hemipelagic sediments offers a unique opportunity to study the variability of the East Asian monsoon, the erosion and weathering of tectonic orogens as well as its possible impact on global and regional climate.Leg 184, the first deep\|sea drilling leg to the seas off China, cored 17 holes at 6 sites in the northern and southern parts of the SCS and recovered 5463m of sediment. The drilling of hemipelagic sediments was exceptionally successful, with core recovery averaging 83%~101%. The 32Ma sequence of deep\|sea sediments recovered during Leg 184 covers almost the entire environmental history of the SCS since its opening. The abnormally high sediment accumulation rates in the Oligocene section are correlative with the incipient sea floor spreading. The bathyal nature of the Oligocenefauna implies that rifting occurred in the Eocene or earlier. Faunal changesfrom the early to late Oligocene are indicative of basin deepening, a trend thatis even more evident in the Miocene section. Sediment deformation, abruptlithologic changes, and a hiatus occur near the Oligocene/Miocene boundary,representing one of the most significant events in the tectonic andenvironmental history of the SCS.展开更多
Drill sampling has been widely employed as an effective way to acquire deep samples in extraterrestrial exploration. A novel sampling method, namely, flexible-tube coring, was adopted for the Chang'e mission to acqui...Drill sampling has been widely employed as an effective way to acquire deep samples in extraterrestrial exploration. A novel sampling method, namely, flexible-tube coring, was adopted for the Chang'e mission to acquire drilling cores without damaging stratification information. Since the extraterrestrial environment is uncertain and different from the terrestrial environment, automated drill sampling missions are at risk of failure. The principles of drilling and coring for the lunar subsurface should be fully tested and verified on earth before launch. This paper proposes a test-bed for conducting the aforementioned experiments on earth. The test-bed comprises a rotary-percussive drilling mechanism, penetrating mechanism, drilling medium container, and signal acquisition and control system. For granular soil, coring experiments indicate that the sampling method has a high coring rate greater than 80%. For hard rock, drilling experiments indicate that the percussive frequency greatly affects the drilling efficiency. A multi-layered simulant composed of granular soil and hard rock is built to test the adaptability of drilling and coring. To tackle complex drilling media, an intelligent drilling strategy based on online recognition is proposed to improve the adaptability of the sampling drill. The primary features of this research are the proposal of a scheme for drilling and coring a test-bed for validation on earth and the execution of drilling experiments in complex media.展开更多
Dry drilling only with the assistance of an auger is a reliable and realistic approach to remove abundant soils from the side of a bit in the harsh, dry conditions on the Moon. Based on an elementary analysis, using J...Dry drilling only with the assistance of an auger is a reliable and realistic approach to remove abundant soils from the side of a bit in the harsh, dry conditions on the Moon. Based on an elementary analysis, using Janssen's model to reflect the coupling effect among the different components of the stress, the present paper models the conveying dynamics along the helical groove and the sampling mechanism in the centering hole of the stem for an auger drilling into lunar soil simulant. Combining the two parts as well as a simple cutting model for the bit, a whole drilling model is established to investigate the complicated relation among the conveying ability of the auger, the coring rate, and drilling parameters such as the penetration and rotation speeds. The relation is revealed by the complicated transition between different sub-models with the help of the physical transition conditions. A series of experiments with constant penetration and rotation speeds are conducted to verify the model. Three aspects of characteristics of the drilling dynamics are manifested,(i) the loads on the bit are almost independent of penetration;(ii) three obvious drilling stages with respect to cut per revolution are grouped;(iii) a linear relationship is found between the coring rate and the revolution per penetration.展开更多
This paper describes an investigation of active bit vibration on the penetration mechanisms and bit-rock interaction for drilling with a diamond impregnated coring bit. A series of drill-off tests(DOTs) were conducted...This paper describes an investigation of active bit vibration on the penetration mechanisms and bit-rock interaction for drilling with a diamond impregnated coring bit. A series of drill-off tests(DOTs) were conducted where the drilling rate-of-penetration(ROP) was measured at a series of step-wise increasing static bit thrusts or weight-on-bits(WOBs). Two active DOTs were conducted by applying 60 Hz axial vibration at the bit-rock interface using an electromagnetic vibrating table mounted underneath the drilling samples, and a passive DOT was conducted where the bit was allowed to vibrate naturally with lower amplitude due to the compliance of the drilling sample mountings. During drilling, an acoustic emission(AE) system was used to record the AE signals generated by the diamond cutter penetration and the cuttings were collected for grain size analysis. The instrumented drilling system recorded the dynamic motions of the bit-rock interface using a laser displacement sensor, a load cell, and an LVDT(linear variable differential transformer) recorded the dynamic WOB and the ROP, respectively. Calibration with the drilling system showed that rotary speed was approximately the same at any given WOB, facilitating comparison of the results at the same WOB. Analysis of the experimental results shows that the ROP of the bit at any given WOB increased with higher amplitude of axial bit-rock vibration, and the drill cuttings increased in size with a higher ROP. Spectral analysis of the AEs indicated that the higher ROP and larger cutting size were correlated with a higher AE energy and a lower AE frequency. This indicated that larger fractures were being created to generate larger cutting size. Overall, these results indicate that a greater magnitude of axial bit-rock vibration produces larger fractures and generates larger cuttings which, at the same rotary speed, results in a higher ROP.展开更多
Songke Well No.2,one of the main part of the scientific drilling project in Songliao Basin,which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Perm...Songke Well No.2,one of the main part of the scientific drilling project in Songliao Basin,which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep,can be considered as the deepest continental drilling project in Asia.Aiming at the features of longer well sections,larger diameters and multiple spud-ins for coring of Songke Well No.2,this project broke through the "coring in small diameter and reaming in large diameter"spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-singlecylinder roundtrip footage.At the same time,"coring in the same diameter and completing drilling at one single diameter"was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long,high-efficient operation with "drilling long footage with drill tools combined in multicylinders"was achieved at deep coring section.Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm,and the footage per roundtrip footage at φ311 mm,φ216 mm and φ152 mm is all more than 30 m,all of these breakthroughs reduced at least 300 days for this project;moreover,considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240℃ after drilling completion,a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer,which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240℃ in China;Besides,considering the high-quality requirement on cores imposed by the project,the method "mechanical cored is charge"to discharge core nondestructively on the ground was worked out,and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.展开更多
Based on analyzing method of large diameter hard rock drilling at home and abroad, the authors proposed a set of drilling of large diameter hard rock annular coring in low energy consumption, low cost and high efficie...Based on analyzing method of large diameter hard rock drilling at home and abroad, the authors proposed a set of drilling of large diameter hard rock annular coring in low energy consumption, low cost and high efficiency. The prototype of drilling tools was designed and was made. The experimental result of the prototype indicates that this plan and technology are feasible and reach the anticipated object of design. A set of drilling tools has been offered for the constructs of large diameter hard rock coring.展开更多
Chang’e-5 explorer successfully acquired lunar regolith core samples from depths of greater than 1 m of lunar surface.This study analyzed the lunar core drilling process based on the telemetry data,image information,...Chang’e-5 explorer successfully acquired lunar regolith core samples from depths of greater than 1 m of lunar surface.This study analyzed the lunar core drilling process based on the telemetry data,image information,and returned samples to optimize the sampling device design and enhance the understanding of the lunar regolith.In particular,a prediction method for the projected drilling path and local terrain fitting of drilling dip angle was proposed based on the flight events recorded during the core drilling process and the image information acquired before,during,and after sampling.The results revealed that the drilling dip angle of Chang’e-5 was approximately2.3.,and the deviation of the drilling length and depth was less than 2 mm.For continuous drilling,a fusion method based on telemetry data and image information was applied to determine the demarcation point of drilling with and without the lunar soil.The position of the demarcation point implied that the drilling point remained at approximately 6 mm loose soil,thereby lagging the action of the force response.Additionally,a characteristic parameter comparison method was proposed for the lunar and ground drilling to analyze the status of the lunar soil.Furthermore,the analysis results revealed that the majority of the Chang’e-5 drilling samples were derived from 0–73.8 cm below the lunar surface and few samples were extracted below 73.8 cm,as the drilling encountered several rocky regions.Moreover,the drilling point exhibited two prominent stratification variations at~28.7 cm and~70 cm below the lunar surface.Ultimately,the preliminary relationship between sample dissected position in soft tube and drilling displacement was analyzed.The segmented estimation results can support research on subsurface lunar soil.展开更多
基金The paper was partially supported by grants from the Research Grant Council,Hong Kong Special Administrative Region,P.R.China(Project Nos.HKU 17207518 and R5037-18).
文摘Drilling speed and associated analyses from factual field data of hydraulic rotary drilling have not been fully utilized.The paper provides the reference and comparison for the utilization of drilling information from two adjacent vertical drillholes that were formed with the same hydraulic rotary drilling machine and bit.The analysis of original factual data is presented to obtain the constant drilling speed during net drilling process.According to the factual data along two adjacent drillholes,the digitalization results respectively include 461 linear zones and 210 linear zones with their constant drilling speeds and associated drilling parameters.The digitalization results can accurately present the spatial distributions and interface boundaries of drilled geomaterials and the results are consistent with the paralleled site loggings.The weighted average drilling speeds from 2.335 m/min to 0.044 m/min represent 13 types of drilled geomaterials from soils to hard rocks.The quantitative relation between drilling speed and strength property is provided.The digitalization results can statistically profile the basic strength quality grades of III to VI from soils to hard rocks.The thickness distributions of four strength quality grades are presented for each individual type of geomaterials along two drillholes.In total,50.2%of geomaterials from drillhole A are grade IV and 57.4%of geomaterials from drillhole B are grade III.The digitalization results can offer an accurate and cost-effective tool to quantitatively describe the spatial distribution and in situ strength profile of drilled geomaterials in the current drilling projects.
文摘In many engineering applications such as mining,geotechnical and petroleum industries,drilling operation is widely used.The drilling operation produces sound by-product,which could be helpful for preliminary estimation of the rock properties.Nevertheless,determination of rock properties is very difficult by the conventional methods in terms of high accuracy,and thus it is expensive and timeconsuming.In this context,a new technique was developed based on the estimation of rock properties using dominant frequencies from sound pressure level generated during diamond core drilling operations.First,sound pressure level was recorded and sound signals of these sound frequencies were analyzed using fast Fourier transform (FFT).Rock drilling experiments were performed on five different types of rock samples using computer numerical control (CNC) drilling machine BMV 45 T20.Using simple linear regression analysis,mathematical equations were developed for various rock properties,i.e.uniaxial compressive strength,Brazilian tensile strength,density,and dominant frequencies of sound pressure level.The developed models can be utilized at early stage of design to predict rock properties.
基金the Natural Science Foundation of China(Nos.51874188,51927807,41941018 and 51704125)the State Key Laboratory for GeoMechanics and Deep Underground Engineering,China University of Mining&Technology(No.SKLGDUEK1717)+1 种基金the Major Scientific and Technological Innovation Project of Shandong Province,China(No.2019SDZY04)the Project of Shandong Province Higher Educational Youth Innovation Science and Technology Program(No.2019KJG013).
文摘The rock uniaxial compressive strength(UCS)is the basic parameter for support designs in underground engineering.In particular,the rock UCS should be obtained rapidly for underground engineering with complex geological conditions,such as soft rock,fracture areas,and high stress,to adjust the excavation and support plan and ensure construction safety.To solve the problem of obtaining real-time rock UCS at engineering sites,a rock UCS forecast idea is proposed using digital core drilling.The digital core drilling tests and uniaxial compression tests are performed based on the developed rock mass digital drilling system.The results indicate that the drilling parameters are highly responsive to the rock UCS.Based on the cutting and fracture characteristics of the rock digital core drilling,the mechanical analysis of rock cutting provides the digital core drilling strength,and a quantitative relationship model(CDP-UCS model)for the digital core drilling parameters and rock UCS is established.Thus,the digital core drilling-based rock UCS forecast method is proposed to provide a theoretical basis for continuous and quick testing of the surrounding rock UCS.
基金The National Science and Technology Major Project under contract No.2011ZX05025-002-03the Project of China National Offshore Oil Corporation(CNOOC)Limited under contract No.CCL2013ZJFNO729the National Natural Science Foundation of China under contract No.41530963.
文摘Making full use of modern analytical and testing techniques to explore and establish new indexes or methods for extracting paleoseawater geochemical information from sediments will help to reconstruct the sedimentary paleoenvironment in different research areas.The connection between the subsidence of the South China Sea basin and the uplift of the Tibetan Plateau has been a scientific concern in recent decades.To explore the information on the sedimentary paleoenvironment,provenance changes and uplift of Tibetan Plateau contained in core sediments(debris),we selected core samples from Well LS33 in the Qiongdongnan Basin,South China Sea,and analyzed the contents of typical elements(Al,Th,and rare earth elements)that can indicate changes in provenance and the Sr isotopic compositions,which can reveal the geochemical characteristics of the paleoseawater depending on the type of material(authigenic carbonate and terrigenous detritus).The results show the following:(1)during the late Miocene,the Red River transported a large amount of detrital sediments from the ancient continental block(South China)to the Qiongdongnan Basin.(2)The authigenic carbonates accurately record changes in the 87Sr/86Sr ratios in the South China Sea since the Oligocene.These ratios reflect the semi-closed marginal sea environment of the South China Sea(relative to the ocean)and the sedimentary paleoenvironment evolution process of the deep-water area of the Qiongdongnan Basin from continental to transitional and then to bathyal.(3)Since the Neogene,the variations in the 87Sr/86Sr ratio in the authigenic carbonates have been consistent with the variations in the uplift rate of the Tibetan Plateau and the sediment accumulation rate in the Qiongdongnan Basin.These consistent changes indicate the complex geological process of the change in the rock weathering intensity and terrigenous Sr flux caused by changes in the uplift rate of the Tibetan Plateau,which influence the Sr isotope composition of seawater.
文摘Both evolution of the Asian monsoon system and the Cenozoic global cooling are thought to be closely linked to the Himalayan—Tibetan orogen. The South China Sea (SCS) with its high sedimentation rates of carbonate\|rich hemipelagic sediments offers a unique opportunity to study the variability of the East Asian monsoon, the erosion and weathering of tectonic orogens as well as its possible impact on global and regional climate.Leg 184, the first deep\|sea drilling leg to the seas off China, cored 17 holes at 6 sites in the northern and southern parts of the SCS and recovered 5463m of sediment. The drilling of hemipelagic sediments was exceptionally successful, with core recovery averaging 83%~101%. The 32Ma sequence of deep\|sea sediments recovered during Leg 184 covers almost the entire environmental history of the SCS since its opening. The abnormally high sediment accumulation rates in the Oligocene section are correlative with the incipient sea floor spreading. The bathyal nature of the Oligocenefauna implies that rifting occurred in the Eocene or earlier. Faunal changesfrom the early to late Oligocene are indicative of basin deepening, a trend thatis even more evident in the Miocene section. Sediment deformation, abruptlithologic changes, and a hiatus occur near the Oligocene/Miocene boundary,representing one of the most significant events in the tectonic andenvironmental history of the SCS.
基金Supported by National Natural Science Foundation of China(Grant No.51105092)Introducing Talents of Discipline to Universities(111 Program,Grant No.B07018)+1 种基金Heilongjiang Postdoctoral Grant(Grant No.LBHZ11168)China Postdoctoral Science Foundation(Grant No.2012M520722)
文摘Drill sampling has been widely employed as an effective way to acquire deep samples in extraterrestrial exploration. A novel sampling method, namely, flexible-tube coring, was adopted for the Chang'e mission to acquire drilling cores without damaging stratification information. Since the extraterrestrial environment is uncertain and different from the terrestrial environment, automated drill sampling missions are at risk of failure. The principles of drilling and coring for the lunar subsurface should be fully tested and verified on earth before launch. This paper proposes a test-bed for conducting the aforementioned experiments on earth. The test-bed comprises a rotary-percussive drilling mechanism, penetrating mechanism, drilling medium container, and signal acquisition and control system. For granular soil, coring experiments indicate that the sampling method has a high coring rate greater than 80%. For hard rock, drilling experiments indicate that the percussive frequency greatly affects the drilling efficiency. A multi-layered simulant composed of granular soil and hard rock is built to test the adaptability of drilling and coring. To tackle complex drilling media, an intelligent drilling strategy based on online recognition is proposed to improve the adaptability of the sampling drill. The primary features of this research are the proposal of a scheme for drilling and coring a test-bed for validation on earth and the execution of drilling experiments in complex media.
基金Project supported by the National Natural Science Foundation of China(Nos.11572017 and11772021)
文摘Dry drilling only with the assistance of an auger is a reliable and realistic approach to remove abundant soils from the side of a bit in the harsh, dry conditions on the Moon. Based on an elementary analysis, using Janssen's model to reflect the coupling effect among the different components of the stress, the present paper models the conveying dynamics along the helical groove and the sampling mechanism in the centering hole of the stem for an auger drilling into lunar soil simulant. Combining the two parts as well as a simple cutting model for the bit, a whole drilling model is established to investigate the complicated relation among the conveying ability of the auger, the coring rate, and drilling parameters such as the penetration and rotation speeds. The relation is revealed by the complicated transition between different sub-models with the help of the physical transition conditions. A series of experiments with constant penetration and rotation speeds are conducted to verify the model. Three aspects of characteristics of the drilling dynamics are manifested,(i) the loads on the bit are almost independent of penetration;(ii) three obvious drilling stages with respect to cut per revolution are grouped;(iii) a linear relationship is found between the coring rate and the revolution per penetration.
基金funded by Atlantic Canada Opportunity Agency (AIF contract number: 7812636-1920044)
文摘This paper describes an investigation of active bit vibration on the penetration mechanisms and bit-rock interaction for drilling with a diamond impregnated coring bit. A series of drill-off tests(DOTs) were conducted where the drilling rate-of-penetration(ROP) was measured at a series of step-wise increasing static bit thrusts or weight-on-bits(WOBs). Two active DOTs were conducted by applying 60 Hz axial vibration at the bit-rock interface using an electromagnetic vibrating table mounted underneath the drilling samples, and a passive DOT was conducted where the bit was allowed to vibrate naturally with lower amplitude due to the compliance of the drilling sample mountings. During drilling, an acoustic emission(AE) system was used to record the AE signals generated by the diamond cutter penetration and the cuttings were collected for grain size analysis. The instrumented drilling system recorded the dynamic motions of the bit-rock interface using a laser displacement sensor, a load cell, and an LVDT(linear variable differential transformer) recorded the dynamic WOB and the ROP, respectively. Calibration with the drilling system showed that rotary speed was approximately the same at any given WOB, facilitating comparison of the results at the same WOB. Analysis of the experimental results shows that the ROP of the bit at any given WOB increased with higher amplitude of axial bit-rock vibration, and the drill cuttings increased in size with a higher ROP. Spectral analysis of the AEs indicated that the higher ROP and larger cutting size were correlated with a higher AE energy and a lower AE frequency. This indicated that larger fractures were being created to generate larger cutting size. Overall, these results indicate that a greater magnitude of axial bit-rock vibration produces larger fractures and generates larger cuttings which, at the same rotary speed, results in a higher ROP.
文摘Songke Well No.2,one of the main part of the scientific drilling project in Songliao Basin,which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep,can be considered as the deepest continental drilling project in Asia.Aiming at the features of longer well sections,larger diameters and multiple spud-ins for coring of Songke Well No.2,this project broke through the "coring in small diameter and reaming in large diameter"spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-singlecylinder roundtrip footage.At the same time,"coring in the same diameter and completing drilling at one single diameter"was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long,high-efficient operation with "drilling long footage with drill tools combined in multicylinders"was achieved at deep coring section.Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm,and the footage per roundtrip footage at φ311 mm,φ216 mm and φ152 mm is all more than 30 m,all of these breakthroughs reduced at least 300 days for this project;moreover,considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240℃ after drilling completion,a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer,which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240℃ in China;Besides,considering the high-quality requirement on cores imposed by the project,the method "mechanical cored is charge"to discharge core nondestructively on the ground was worked out,and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.
文摘Based on analyzing method of large diameter hard rock drilling at home and abroad, the authors proposed a set of drilling of large diameter hard rock annular coring in low energy consumption, low cost and high efficiency. The prototype of drilling tools was designed and was made. The experimental result of the prototype indicates that this plan and technology are feasible and reach the anticipated object of design. A set of drilling tools has been offered for the constructs of large diameter hard rock coring.
基金supported by the National Medium and Longterm Science and Technology Major Special Project of ChinaYoung Top Talents Foundation of China Aerospace Science and Technology Corporation+1 种基金Pre-research project on Civil Aerospace Technologies by CNSA under Grant D020201the National Natural Science Foundation of China(Research on Supporting Management Strategy of Scientific Research Activities in Lunar Exploration under Grant 42142033)。
文摘Chang’e-5 explorer successfully acquired lunar regolith core samples from depths of greater than 1 m of lunar surface.This study analyzed the lunar core drilling process based on the telemetry data,image information,and returned samples to optimize the sampling device design and enhance the understanding of the lunar regolith.In particular,a prediction method for the projected drilling path and local terrain fitting of drilling dip angle was proposed based on the flight events recorded during the core drilling process and the image information acquired before,during,and after sampling.The results revealed that the drilling dip angle of Chang’e-5 was approximately2.3.,and the deviation of the drilling length and depth was less than 2 mm.For continuous drilling,a fusion method based on telemetry data and image information was applied to determine the demarcation point of drilling with and without the lunar soil.The position of the demarcation point implied that the drilling point remained at approximately 6 mm loose soil,thereby lagging the action of the force response.Additionally,a characteristic parameter comparison method was proposed for the lunar and ground drilling to analyze the status of the lunar soil.Furthermore,the analysis results revealed that the majority of the Chang’e-5 drilling samples were derived from 0–73.8 cm below the lunar surface and few samples were extracted below 73.8 cm,as the drilling encountered several rocky regions.Moreover,the drilling point exhibited two prominent stratification variations at~28.7 cm and~70 cm below the lunar surface.Ultimately,the preliminary relationship between sample dissected position in soft tube and drilling displacement was analyzed.The segmented estimation results can support research on subsurface lunar soil.