A study of the magnetic field with an unsaturated iron core in tokamak equilibrium using a spool model is described in detail. The application of this model to the J-TEXT tokamak shows that the calculated results are ...A study of the magnetic field with an unsaturated iron core in tokamak equilibrium using a spool model is described in detail. The application of this model to the J-TEXT tokamak shows that the calculated results are in good agreement with those measured experimentally. At present this scheme is used to give the plasma configuration during J-TEXT＇s operation.展开更多
A special winding iron-core is designed to act as the snubber for the neutral beam injection （NBI） power supply （PS） system in EAST, which will limit the fault current and energy caused by occasional sparking in t...A special winding iron-core is designed to act as the snubber for the neutral beam injection （NBI） power supply （PS） system in EAST, which will limit the fault current and energy caused by occasional sparking in the NBI ion source. 50-50 Ni-Fe is chosen as the high-frequency magnetization material for the iron-core. Equations for the snubber is derived from the design of the iron-core. The iron-loss factor and eddy-current losses are found to increase in a sample experiment at a frequency from 1 kHz to 20 kHz. A 1：10 miniature of the iron-core is tested and performs well with a fine capability.展开更多
The amount of literature on both melting and thermal conductivity of iron at Earth’s core conditions is overwhelming and the discrepancies are very large.There is a broad range of experimental techniques each of whic...The amount of literature on both melting and thermal conductivity of iron at Earth’s core conditions is overwhelming and the discrepancies are very large.There is a broad range of experimental techniques each of which is flawed to a certain degree,which may explain the discrepancy.In this report,we present new data using a different method for determining the phase behavior and resistivity of iron in the laser-heated diamond cell by measuring the electrical resistance of both solid and liquid iron wires.The experiment avoids some of the major flaws of previous experiments,the most important of which is the detection of the onset of melting.These measurements confirm a shallow melting curve found earlier and the resistivity data imply a trend towards low thermal conductivity in the liquid outer core.展开更多
Automated core scanning technologies for mineralogical characterisation of diamond core, drill chips pulps is now an established technique, particularly in the Australian iron ore industry, for mineral analysis in exp...Automated core scanning technologies for mineralogical characterisation of diamond core, drill chips pulps is now an established technique, particularly in the Australian iron ore industry, for mineral analysis in exploration and mining. Application of reflectance spectroscopy over the 400–2500 nm, visible to near-infrared wavelength range, has been used to characterise the iron ore oxide mineralogy of bedded iron deposit (BID) derived iron ores in India (Thangavelu et al., 2011) and Brazil (da Costa et al., 2009), and used to define the ore and gangue (e.g., clay) mineralogy in ironstone or channel iron deposits (CID) in the Pilbara region of Western Australia (e.g., Haest et al., 2012).展开更多
The presence of light element(s)in the Earth’s core is necessary in order to explain the observed density and velocity discrepancy for the core(Anderson and Ahrens,1994).O,Si,S,C and H were suggested as potential can...The presence of light element(s)in the Earth’s core is necessary in order to explain the observed density and velocity discrepancy for the core(Anderson and Ahrens,1994).O,Si,S,C and H were suggested as potential candidates based on cosmochemical considerations(Stevenson,1981).High-pressure experiment results,in conjunction with theoretical and cosmochemical evidences,argued that it is difficult for any one of them to account for the core展开更多
基金supported by National Basic Research Program ('973'Program)of China (No.2008CB717805)
文摘A study of the magnetic field with an unsaturated iron core in tokamak equilibrium using a spool model is described in detail. The application of this model to the J-TEXT tokamak shows that the calculated results are in good agreement with those measured experimentally. At present this scheme is used to give the plasma configuration during J-TEXT＇s operation.
文摘A special winding iron-core is designed to act as the snubber for the neutral beam injection （NBI） power supply （PS） system in EAST, which will limit the fault current and energy caused by occasional sparking in the NBI ion source. 50-50 Ni-Fe is chosen as the high-frequency magnetization material for the iron-core. Equations for the snubber is derived from the design of the iron-core. The iron-loss factor and eddy-current losses are found to increase in a sample experiment at a frequency from 1 kHz to 20 kHz. A 1：10 miniature of the iron-core is tested and performs well with a fine capability.
基金supported by the National Science Foundation (No. 1248553)
文摘The amount of literature on both melting and thermal conductivity of iron at Earth’s core conditions is overwhelming and the discrepancies are very large.There is a broad range of experimental techniques each of which is flawed to a certain degree,which may explain the discrepancy.In this report,we present new data using a different method for determining the phase behavior and resistivity of iron in the laser-heated diamond cell by measuring the electrical resistance of both solid and liquid iron wires.The experiment avoids some of the major flaws of previous experiments,the most important of which is the detection of the onset of melting.These measurements confirm a shallow melting curve found earlier and the resistivity data imply a trend towards low thermal conductivity in the liquid outer core.
文摘Automated core scanning technologies for mineralogical characterisation of diamond core, drill chips pulps is now an established technique, particularly in the Australian iron ore industry, for mineral analysis in exploration and mining. Application of reflectance spectroscopy over the 400–2500 nm, visible to near-infrared wavelength range, has been used to characterise the iron ore oxide mineralogy of bedded iron deposit (BID) derived iron ores in India (Thangavelu et al., 2011) and Brazil (da Costa et al., 2009), and used to define the ore and gangue (e.g., clay) mineralogy in ironstone or channel iron deposits (CID) in the Pilbara region of Western Australia (e.g., Haest et al., 2012).
文摘The presence of light element(s)in the Earth’s core is necessary in order to explain the observed density and velocity discrepancy for the core(Anderson and Ahrens,1994).O,Si,S,C and H were suggested as potential candidates based on cosmochemical considerations(Stevenson,1981).High-pressure experiment results,in conjunction with theoretical and cosmochemical evidences,argued that it is difficult for any one of them to account for the core
