Using a special coated sand as the material of the selected laser sintering (SLS), the authors test and investigate the strength change of the test samples in terms of different sintering parameters (scanning speed, l...Using a special coated sand as the material of the selected laser sintering (SLS), the authors test and investigate the strength change of the test samples in terms of different sintering parameters (scanning speed, laser power, sintering thickness, and so on). The characteristics of coated sand hardening by laser beam are analyzed. The sintered mold (or core) for given casting is poured with molten metal.展开更多
By using Visual C++, a model with post processing was carried out to simulate the temperature and strength distributions of the mold(core). The results are shown in 256 color graphic mode. With this model, the tempera...By using Visual C++, a model with post processing was carried out to simulate the temperature and strength distributions of the mold(core). The results are shown in 256 color graphic mode. With this model, the temperature and strength distributions of the mold(core) both in case of heating process for core in the furnace and solidification process for a thin wall aluminum alloy casting in the mold(core) are numerically simulated. The results show that the temperature and strength distributions of the mold(core) were uneven because the thermal conductivity of the resin sand was much small. This study laid a basis for the optimum design of the mold(core) properties. [展开更多
Thermal stress in castings results from nonuniform cooling. The thermal stress and the deformation can change the casting and mold contact conditions which then alter the heat transfer between the casting and the mold...Thermal stress in castings results from nonuniform cooling. The thermal stress and the deformation can change the casting and mold contact conditions which then alter the heat transfer between the casting and the mold. The contact element method was used to study the interaction between a sand mold and a casting. The contact status was then fed back to the heat transfer analysis between the sand mold and the casting to re-evaluate the heat transfer coefficient based on the gap size or pressure between surfaces. The thermal and mechanical phenomena are then coupled in two directions. The method was applied to analyze stress in a stress frame specimen casting and a cylinder block. The results are more accurate than without consideration of the contact effects on the heat transfer.展开更多
文摘Using a special coated sand as the material of the selected laser sintering (SLS), the authors test and investigate the strength change of the test samples in terms of different sintering parameters (scanning speed, laser power, sintering thickness, and so on). The characteristics of coated sand hardening by laser beam are analyzed. The sintered mold (or core) for given casting is poured with molten metal.
文摘By using Visual C++, a model with post processing was carried out to simulate the temperature and strength distributions of the mold(core). The results are shown in 256 color graphic mode. With this model, the temperature and strength distributions of the mold(core) both in case of heating process for core in the furnace and solidification process for a thin wall aluminum alloy casting in the mold(core) are numerically simulated. The results show that the temperature and strength distributions of the mold(core) were uneven because the thermal conductivity of the resin sand was much small. This study laid a basis for the optimum design of the mold(core) properties. [
基金the National Key Basic Research and Development (973) program of China (No. 2005CB724105)
文摘Thermal stress in castings results from nonuniform cooling. The thermal stress and the deformation can change the casting and mold contact conditions which then alter the heat transfer between the casting and the mold. The contact element method was used to study the interaction between a sand mold and a casting. The contact status was then fed back to the heat transfer analysis between the sand mold and the casting to re-evaluate the heat transfer coefficient based on the gap size or pressure between surfaces. The thermal and mechanical phenomena are then coupled in two directions. The method was applied to analyze stress in a stress frame specimen casting and a cylinder block. The results are more accurate than without consideration of the contact effects on the heat transfer.