ASSURE模型在高职商务英语课程思政教学中的应用

在高职商务英语课程教学中落实课程思政要求,融入中国式现代化战略思想、中华传统优秀文化,有利于增强学生的爱国热情和民族文化自信。本文以ASSURE模型为指导框架,挖掘教学主题和内容中的思政元素,从六个环节进行教学设计,采用线上线下、课堂内外、校内校外“三结合”的教学路径。在商务英语教学中融入基于职业导向的思政教育,强化学生商务英语语言技能的同时,注重提升学生的职业素养和道德品质,促进学生全面发展。

ASSURE理念下思政教育走进大学英语翻转课堂

随着课程思政走进大学英语课堂,英语教师要改变传统的教学模式,在ASSURE教学理念的指导下,以山东科技职业学院思政版PPT为研究对象,从分析学习者、陈述教学目标、选择教学方法、媒体和材料、使用媒体和材料、要求学习者参与、评价和修正等六个方面分析其思政素材对于大学英语课程思政的意义。探讨了大学英语课程思政的不足之处,以便更好地在该理念的指导下让课程思政走进翻转课堂。

Innovation and Practice of Internal Quality Assurance System in Higher Education Institutions -- Taking Jingzhou Vocational and Technical College as an Example

Continuously improving the internal quality assurance system and promoting the innovative development of higher vocational education is a challenge that every higher vocational institution must solve on the road of diagnosis and improvement.To address the current dilemma of building internal quality assurance systems in higher education institutions,this study utilizes a case study approach.This study takes Jingzhou Vocational and Technical College as the research object for research.Conclusion:The excellent diagnosis and reform model and the effectiveness of diagnosis and reform in this school can provide new strategic ideas for the practice of diagnosis and reform for the high-quality development of higher education in Hubei.

Implementation of Level-3 Autonomous Patient-Specific Quality Assurance with Automated Human Interactive Devices

Purpose: Patient-specific quality assurance (PSQA) requires manual operation of different workstations, which is time-consuming and error-prone. Therefore, developing automated solutions to improve efficiency and accuracy is a priority. The purpose of this study was to develop a general software interface with scripting on a human interactive device (HID) for improving the efficiency and accuracy of manual quality assurance (QA) procedures. Methods: As an initial application, we aimed to automate our PSQA workflow that involves Varian Eclipse treatment planning system, Elekta MOSAIQ oncology information system and PTW Verisoft application. A general platform, the AutoFrame interface with two imbedded subsystems—the AutoFlow and the PyFlow, was developed with a scripting language for automating human operations of aforementioned systems. The interface included three functional modules: GUI module, UDF script interpreter and TCP/IP communication module. All workstations in the PSQA process were connected, and most manual operations were automated by AutoFrame sequentially or in parallel. Results: More than 20 PSQA tasks were performed both manually and using the developed AutoFrame interface. On average, 175 (±12) manual operations of the PSQA procedure were eliminated and performed by the automated process. The time to complete a PSQA task was 8.23 (±0.78) minutes for the automated workflow, in comparison to 13.91 (±3.01) minutes needed for manual operations. Conclusion: We have developed the AutoFrame interface framework that successfully automated our PSQA procedure, and significantly reduced the time, human (control/clicking/typing) errors, and operators’ stress. Future work will focus on improving the system’s flexibility and stability and extending its operations to other QA procedures.

A novel method for geometric quality assurance of rock joint replicas in direct shear testing-Part 1:Derivation of quality assurance parameters and geometric reproducibility

Since each rock joint is unique by nature,the utilization of replicas in direct shear testing is required to carry out experimental parameter studies.However,information about the ability of the replicas to simulate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.With the aim to facilitate generation of high-quality direct shear test data from replicas,a novel component in the testing procedure is introduced by presenting two parameters for geometric quality assurance.The parameters are derived from surface comparisons of three-dimensional(3D)scanning data of the rock joint and its replicas.The first parameter,smf,captures morphological deviations between the replica and the rock joint surfaces.smf is derived as the standard deviation of the deviations between the coordinate points of the replica and the rock joint.Four sources of errors introduced in the replica manufacturing process employed in this study could be identified.These errors could be minimized,yielding replicas with smf
0.06 mm.The second parameter is a vector,VHp100,which describes deviations with respect to the shear direction.It is the projection of the 100 mm long normal vector of the best-fit plane of the replica joint surface to the corresponding plane of the rock joint.

VHp100

was found to be less than or equal to 0.36 mm in this study.Application of these two geometric quality assurance parameters demonstrates that it is possible to manufacture replicas with high geometric similarity to the rock joint.In a subsequent paper(part 2),smf and VHp100 are incorporated in a novel quality assurance method,in which the parameters shall be evaluated prior to direct shear testing.Replicas having parameter values below established thresholds shall have a known and narrow dispersion and imitate the shear mechanical behavior of the rock joint.

Construction and Quality Assurance of Outstanding Applied Horticultural Talent Training Curriculum System under the Background of New Agricultural Science:A Case Study of Huaiyin Institute of Technology

Huaiyin Institute of Technology is taken as the research object.The content of horticulture curriculum system under the background of new agricultural science is constructed and elaborated,including theoretical curriculum system of"three platforms and seven curriculum groups"and practice system of"two platforms,three levels and four modules".Moreover,the quality assurance strategy of the curriculum system is discussed from three angles of enhancing professional emotion,enhancing professional practice and strengthening innovation ability,to reach the training objective of outstanding applied horticultural talents under the background of new agricultural science.

A novel method for geometric quality assurance of rock joint replicas in direct shear testing-Part 2:Validation and mechanical replicability

Each rock joint is unique by nature which means that utilization of replicas in direct shear tests is required in experimental parameter studies.However,a method to acquire knowledge about the ability of the replicas to imitate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.In this study,a novel method is presented for geometric quality assurance of replicas.The aim is to facilitate generation of high-quality direct shear testing data as a prerequisite for reliable subsequent analyses of the results.In Part 1 of this study,two quality assurance parameters,smf and V_(Hp100),are derived and their usefulness for evaluation of geometric deviations,i.e.geometric reproducibility,is shown.In Part 2,the parameters are validated by showing a correlation between the parameters and the shear mechanical behavior,which qualifies the parameters for usage in the quality assurance method.Unique results from direct shear tests presenting comparisons between replicas and the rock joint show that replicas fulfilling proposed threshold values of σ_(mf)<0.06 mm and
|V_(Hp100)|
<0.2 mm have a narrow dispersion and imitate the shear mechanical behavior of the rock joint in all aspects apart from having a slightly lower peak shear strength.The wear in these replicas,which have similar morphology as the rock joint,is in the same areas as in the rock joint.The wear is slightly larger in the rock joint and therefore the discrepancy in peak shear strength derives from differences in material properties,possibly from differences in toughness.It is shown by application of the suggested method that the quality assured replicas manufactured following the process employed in this study phenomenologically capture the shear strength characteristics,which makes them useful in parameter studies.

基于ASSURE模型的大学英语课程思政教学改革研究

在大学英语教学中融入课程思政,是新时代立德树人教育践行的重要途径。ASSURE模型最初由美国教育技术专家海涅克等人提出,六个大写字母分别代表模式中的六个环节。文章基于课程思政教育背景,对模型中的每个字母赋予新的涵义,即分析学习者思政融入点、陈述思政育人目标、选择思政教法与媒体、使用思政教学平台、规范思政教学过程。该教学模式充分发挥新媒体、新技术和新材料的优势,打造课程思政育人新剧本,有助于培养学生的思辨能力,帮助其树立正确的价值观和道德观。

ASSURE模式在提升手术室新护士手术配合准备度中的应用

目的:探讨ASSURE模式在手术室新护士手术配合准备度教学培训中的应用效果。方法:将2019年1月至2020年12月入职的21名手术室新护士纳入对照组,2021年1月至2023年3月入职的29名手术室新护士纳入观察组。对照组采用传统的教学模式,观察组采用ASSURE模式。培训时间为3个月。比较两组新护士培训后的理论与操作考核成绩、手术配合能力认可度得分、手术配合准备度得分、教学满意度评分。结果:观察组理论与操作考核成绩、手术配合能力认可度、手术配合准备度得分及教学满意度评分均高于对照组,差异均有统计学意义(P<0.05)。结论:ASSURE模式可提高手术室新护士理论知识及操作技能,提升外科医生对手术室新护士手术配合能力的认可度、提升手术室新护士手术配合准备度自我评价及对教学的满意度。

QUALITY ASSURANCE INFORMATION SYSTEM FOR AGILE MANUFACTURING

The customer driven dynamic global market and geographical distribution of collaborating partners bring new challenges to the development of quality assurance information system (QAIS) for agile manufacturing. With recent dramatic advances in information technology, firstly the requirements of QAIS are examined in agile manufacturing environment, then a new implementation framework of a distributed QAIS is presented, where a deve loping environment of QAIS is established and some critical techniques are studied. Finally a prototype system based on world wide web (WWW) is accomplished.

Quality assurance and quality control in the laboratory andrology

Quality assurance （QA） and quality control （QC） are fundamental aspects of any laboratory measurement. However, in comparison with other medical disciplines, the need for QA and QC in laboratory andrology has been recognized only recently. Furthermore, there is evidence that the effort required to undertake QA and QC has not been wholly welcomed by some clinicians. Nevertheless, accrediting bodies and regulatory authorities increasingly require evidence that laboratories have effective QA and QC measures in place because both are central to the quality management processes. Following the publication of the 5th edition of the World Health Organization Laboratory Manual, existing QA and QC systems will need to be updated to take into account some of the methodological changes recommended by the manual. Three of these are discussed in this commentary; they relate to： （i） the move to infer semen volume from its weight; （ii） the re-classification of sperm motility grades from four to three; and （iii） the publication of a lower reference limit for morphology of 4% （with a corresponding 95% confidence interval of 3%-4%）. The importance of QA and QC in all laboratory tests, including up and coming new tests to assess sperm DNA integrity, is discussed. The need for adequate initial training and continuing professional development programmes to support laboratory scientists performing andrology is also described.

Advances in rheology and flow assurance studies of waxy crude

Flow assurance is one of the core issues in safe and economical operation of waxy crude pipelines.Its essence lies in flow and heat transfer of the crude.In the past 10 years,the authors＇ team has achieved a lot of innovative results in aspects of waxy crude rheology,flow assurance assessment,and pipelining technologies on the basis of decades of studies.The rheological characteristics of waxy crude are much better understood,and a method for quantitatively simulating the effect of flow shear was developed based on some theoretical breakthroughs.Studies of the mechanism of waxy crude rheology have been deepened to the quantitative level.After successful development of efficient numericalalgorithms,accurate simulations have been achieved for various complex flow and heat transfer situations in waxy crude pipelining,and a reliability-based approach to flow assurance assessment has been set up.New pipelining technologies have been developed such as batching pour-point depressant-（PPD-） treated multiple-waxy-crudes,intermittent transport of waxy crudes through long-distance pipelines,and batching hot and cold crudes.By their application,a series of problems hindering safe,efficient and flexible operation of waxy crude pipelines were tackled,demonstrating that transportation technologies for waxy crude have advanced to a new and high level.

A model for estimating flow assurance of hydrate slurry in pipelines

The problem of hydrate blockage of pipelines in offshore production is becoming ever-increasing severe because oil fields in ever-increasing unusual environments have been brought in production.HCFC-141b and THF were selected as the substitutes to study the flow assurance of the hydrates in pipelines.There are critical hydrate volume concentrations for these two slurries.Hydrate slurries behave like Bingham fluids and have high agglomerating tendency when the hydrate volume concentrations are larger than the critical ones.Based on rheological behaviors of these two hydrates,a non-dimensional parameter is proposed through studying the driving forces of agglomeration among hydrate particles,which shows the agglomerating probability of hydrate particles in pipeline and can be used to judge the safety of the pipeline.Moreover,a safe model to judge the safely flow hydrate slurries was presented and verified with the experimental data,which demonstrates that the model is effective to judge whether the pipeline can be run safely or not.

A Quality Assurance Procedure and Evaluation of Rainfall Estimates for C-Band Polarimetric Radar

A mobile C-band dual polarimetric weather radar J type （PCDJ）, which adopts simultaneous transmission and simultaneous reception （STSR） of horizontally and vertically polarized signals, was first developed in China in 2008. It was deployed in the radar observation plan in the South China Heavy Rainfall Experiment （SCHeREX） in the summer of 2008 and 2009, as well as in Tropical Western Pacific Ocean Observation Experiments and Research on the Predictability of High Impact Weather Events from 2008 to 2010 in China （TWPOR）. Using the observation data collected in these experiments, the radar systematic error and its sources were analyzed in depth. Meanwhile an algorithm that can smooth differential propagation phase （~Dp） for estimating the high-resolution specific differential phase （KDP） was developed. After attenuation correction of reflectivity in horizontal polarization （ZH） and differential reflectivity （ZDR） of PCDJ radar by means of KDP, the data quality was improved significantly. Using quality-controlled radar data, quantitative rainfall estimation was performed, and the resutls were compared with rain-gauge measurements. A synthetic ZH /KDp-based method was analyzed. The results the traditional ZH-based method when the rain suggest that the synthetic method has the advantage over rate is 〉5 mm h^-1. The more intensive the rain rates, the higher accuracy of the estimation.

Development of the Supply Chain Oriented Quality Assurance System for Aerospace Manufacturing SMEs and Its Implementation Perspectives

Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard （BS/EN9100） is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps fiarther evaluate and validate the approach and application system development.

Development and Challenge of HIV/AIDS Testing Laboratory Network and Quality Assurance System in China

This paper describes the development and challenge of HIV/AIDS testing laboratory network and quality assurance system in China. At present,the HIV/AIDS testing laboratories includes three classes,the National AIDS Reference Laboratory,HIV/AIDS confirmatory laboratories and HIV/AIDS screening laboratories. All of them are accredited by the health authorities,and each class of laboratories take charge of their function strictly according to the "National Management of HIV/AIDS Detection (2006)". A complete quality assurance and quality control system for HIV/AIDS testing has been developed,which includes technical training,strict laboratory monitoring and approval,examination or proficiency testing on HIV/AIDS detection,and quality evaluation and supervision of HIV/AIDS diagnostic kits. Besides conduct the routine anti-HIV antibody test,more and more laboratories began to conduct other tests,such as CD4+ T lymphocyte cell counting,HIV viral load,HIV DNA PCR,genotyping,drug resistance,and HIV-1 recent infection test. The primary challenges faced by the HIV/AIDS testing laboratory network are in the areas of laboratory management and quality control. For example,the provincial PT program is inefficient,the internal quality control is conducted perfunctorily,personnel training can not met the needs of the workplace,which need to be improved.

The Quality of Medicines in Community Pharmacies in Riyadh, Saudi Arabia: A Lot Quality Assurance Sampling (LQAS)-Based Survey

Objectives: To classify community pharmacies (CPs) in Riyadh, Saudi Arabia, in terms of the quality of medicines sold by them, using?the lot quality assurance sampling (LQAS) technique with a predefined threshold. Methods: Riyadh CPs were divided into 2 categories (“lots” for the purpose of LQAS), i.e., chain and independent CPs. Upper and lower rate thresholds for CPs that sell low-quality medicines were predefined as 20% and 5%, respectively. Consumer and provider risks were predefined as 0.05 and 0.10, respectively. The calculated number of randomly selected CPs required in each lot was 36;then, sale of low-quality medicines in >3 CPs implies a prevalence of >20% of such CPs according to LQAS. A randomly selected brand of amoxicillin (selected as a quality indicator of medicines because it is both widely counterfeited and heat-sensitive) was purchased from each pharmacy by a “mystery shopper”, checked for authenticity, and analyzed for drug content and content uniformity using a validated HPLC method. Results: Substandard amoxicillin was purchased in 9 pharmacies (4 chains and 5 independent). Both lots were thus rejected as unacceptable, which may indicate that consumers in Riyadh are at risk of purchasing substandard medicines at CPs. Conclusions: The quality of medicines sold in CPs in Riyadh did not meet our acceptability criterion, and appropriate intervention by decision makers is recommended. LQAS proved to be a practical, economical, and statistically valid sampling method for surveying the quality of medicines. It should enable decision makers to allocate resources for improvement more efficiently.

An Effective and Secure Quality Assurance System for a Computer Science Program

Improving the quality assurance (QA) processes and acquiring accreditation are top priorities for academic programs. The learning outcomes (LOs)assessment and continuous quality improvement represent core components ofthe quality assurance system (QAS). Current assessment methods suffer deficiencies related to accuracy and reliability, and they lack well-organized processes forcontinuous improvement planning. Moreover, the absence of automation, andintegration in QA processes forms a major obstacle towards developing efficientquality system. There is a pressing need to adopt security protocols that providerequired security services to safeguard the valuable information processed byQAS as well. This research proposes an effective methodology for LOs assessment and continuous improvement processes. The proposed approach ensuresmore accurate and reliable LOs assessment results and provides systematic wayfor utilizing those results in the continuous quality improvement. This systematicand well-specified QA processes were then utilized to model and implement automated and secure QAS that efficiently performs quality-related processes. Theproposed system adopts two security protocols that provide confidentiality, integrity, and authentication for quality data and reports. The security protocols avoidthe source repudiation, which is important in the quality reporting system. This isachieved through implementing powerful cryptographic algorithms. The QASenables efficient data collection and processing required for analysis and interpretation. It also prepares for the development of datasets that can be used in futureartificial intelligence (AI) researches to support decision making and improve thequality of academic programs. The proposed approach is implemented in a successful real case study for a computer science program. The current study servesscientific programs struggling to achieve academic accreditation, and gives rise tofully automating and integrating the QA processes and adopting modern AI andsecurity technologies to develop effective QAS.

以Audit and Assurance课程为例的双语课程教学改革研究

改革开放以来,我国进出口贸易规模不断扩大,这在客观上要求我国加快财务准则的国际化。作为未来人才培养的载体,我国财经类高校纷纷开设双语课程,以培养国际化人才。本研究以Audit and Assurance课程为例,对双语课程在教学改革中的实践进行了阐述,并提出了实践中存在的问题,最后给出相应的对策和建议。

Study on Evaluation of Supplier's Quality Assurance System

To be a worldwide competitor, enterprise needs to e va luate and select its supplier carefully. Generally, to evaluate a supplier, the evaluating effort is focused on the purchase price, delivery time, product quali ty, etc. The vendors’ quality assurance is seldom considered. However, it reflec ts the ability that a vendor can provide high quality but low cost products cont inuously and stably. In this paper, with the study on evaluation of supplier’s q uality assurance system, a set of methods and indices to supplier’s quality assu rance evaluation is introduced. The indices construct an index system, which is based on the ISO9000 series standards. According to the problem’s character and the requirement of evaluation, all the evaluation indices are set off to three k inds: general index, functional index and protective index. And the evaluation m ethod combines quantitative analysis with qualitative analysis. Firstly, a sensi tive factor model is constructed to estimate the contribution of factors that ha ve key effect on synthetic evaluation in supplier’s quality system. Then, those suppliers having low evaluating value are rejected. Secondly, fuzzy logic is int roduced to evaluate other suppliers synthetically. The rest suppliers are compar able. So, supplier’s quality assurance system can be evaluated in quantity. Afte r unification works, the evaluated suppliers can be ranked. And the best vendor can be selected out intuitively.