The low-heat-value cornstalk gas produced in the down-flow fixed bed gasifier was tentatively used for methanol synthesis. The cornstalk gas was purified and the technical procedures such as deoxygenation, desulfuriza...The low-heat-value cornstalk gas produced in the down-flow fixed bed gasifier was tentatively used for methanol synthesis. The cornstalk gas was purified and the technical procedures such as deoxygenation, desulfurization, catalytic cracking of tar, purification and hydrogenation were studied. The catalytic experiments of methanol synthesis with cornstalk syngas were carried out in a tubular-flow integral and isothermal reactor. The effect of reaction temperature, pressure, catalysttypes, catalyst particle size, syngas flow at entering end and composition of syngas was investigated. The optimum process conditions and yield of methanol from cornstalk syngas were obtained. The experimental results indicated that the proper catalyst of the synthetic reaction was C301 and the optimum catalyst size （φ） was 0.833 mm×0.351 mm. The optimum operating temperature and pressure were found to be 235℃ and 5 Mpa, respectively. The suitable syngas flow 0.9-1.10 mol/h at entering end was selected and the best composition of syngas were CO 10.49%, CO2 8.8%, N2 37.32%, CnHm 0.95% and H2 40.49%. The best methanol yield is 0.418 g/g cornstalk. The study provided the technical support for the industrial test of methanol production from biomass （cornstalk）gas.展开更多
Cornstalk is usually directly used as a reductant in reduetive leaching manganese. However, low utilization of cornstalk makes low manganese dissolution ratio, In the research, pretreatment for cornstalk was proposed ...Cornstalk is usually directly used as a reductant in reduetive leaching manganese. However, low utilization of cornstalk makes low manganese dissolution ratio, In the research, pretreatment for cornstalk was proposed to improve manganese dissolution ratio. Cornstalk was preprocessed by a heated sulfuric acid solution （1.2 M of sulfuric acid concentration） for 10 min at 80℃. Thereafter, both the pretreated solution and the residue were used as a reductant for manganese leaching. This method not only exhibited superior activity for hydrolyzing cornstalk but also enhanced manganese dissolution. These effects were attributed to an increase in the amount of reductive sugars resulting from lignin hydrolysis. Through acid pretreatment for cornstalk, the manganese dissolution ratio was improved from 50.14% to 83.46%. The present work demonstrates for the first time the effective acid pretreatment of cornstalk to provide a cost-effective reductant for manganese leaching.展开更多
The organic carbon source coating LiFe_(x)Mn_(1-x)PO_(4)suffers from the problem of non-uniform carbon cladding.Too thick carbon cladding layer instead hinders the de-embedding of lithium ions.In this paper,we choose ...The organic carbon source coating LiFe_(x)Mn_(1-x)PO_(4)suffers from the problem of non-uniform carbon cladding.Too thick carbon cladding layer instead hinders the de-embedding of lithium ions.In this paper,we choose cornstalk as the carbon source,then LiFe_(0.5)Mn_(0.5)PO_(4)@cornstalk-C(LFMP@C-C)with 3D anchoring structure is prepared by the solvothermal method.The results show that the LFMP with cornstalk as the carbon source has better performance compared to the sucrose-coated LFMP material(LFMP@C).The discharge capacity of LFMP@C-C is 116 mAh/g for the first cycle at 1 C and the capacity retention rate is 94.0%after 500 cycles,and the discharge capacity of LFMP@C-C is more than 17.17%higher than that of LFMP@C.展开更多
The replacement of synthetic foam materials using natural biological ones is of great significance for saving energy/resources and reducing environmental pollutions.Here we characterized the microstructure and mechani...The replacement of synthetic foam materials using natural biological ones is of great significance for saving energy/resources and reducing environmental pollutions.Here we characterized the microstructure and mechanical properties of natural cornstalk pith,which has a large annual output yet lacks an effective exploitation,and evaluated its feasibility for applications as a substitute for synthetic foam materials.The cornstalk pith was revealed to be a cellular material composed of closed cells elongated along the growth direction of com plant and reinforced by well-aligned vascular bundles penetrating the foam matrix.The compressive behavior is featured by a stable stress plateau which is favorable for energy absorption with its mechanical properties largely dependent on the hydration state and loading configuration.In particular,the initial dimension and mechanical properties of cornstalk pith can be effectively recovered after deformation simply by hydration treatment owing to swelling effect caused by the turgor pressure from osmosis.The cornstalk pith demonstrates an outstanding combination of low density and high energy absorption efficiency among various foam materials,specifically with its plateau stress and energy absorption comparable or even superior to those of some typical synthetic foam materials.These along with the huge resources and good biodegradability make it a promising natural energy absorbing cellular material for replacing synthetic counterparts.展开更多
基金Project supported by the Foundation of Science and Technology of Henan Province (No. 0324210047).
文摘The low-heat-value cornstalk gas produced in the down-flow fixed bed gasifier was tentatively used for methanol synthesis. The cornstalk gas was purified and the technical procedures such as deoxygenation, desulfurization, catalytic cracking of tar, purification and hydrogenation were studied. The catalytic experiments of methanol synthesis with cornstalk syngas were carried out in a tubular-flow integral and isothermal reactor. The effect of reaction temperature, pressure, catalysttypes, catalyst particle size, syngas flow at entering end and composition of syngas was investigated. The optimum process conditions and yield of methanol from cornstalk syngas were obtained. The experimental results indicated that the proper catalyst of the synthetic reaction was C301 and the optimum catalyst size （φ） was 0.833 mm×0.351 mm. The optimum operating temperature and pressure were found to be 235℃ and 5 Mpa, respectively. The suitable syngas flow 0.9-1.10 mol/h at entering end was selected and the best composition of syngas were CO 10.49%, CO2 8.8%, N2 37.32%, CnHm 0.95% and H2 40.49%. The best methanol yield is 0.418 g/g cornstalk. The study provided the technical support for the industrial test of methanol production from biomass （cornstalk）gas.
基金financially supported by the National Water Pollution Control and Treatment Science and Technology Major Project (No. 2015ZX07205-003)the China Ocean Mineral Resource R&D Association (No. DY125-15-T-08)the National Natural Science Foundation of China (Nos. 21176242 and 21176026)
文摘Cornstalk is usually directly used as a reductant in reduetive leaching manganese. However, low utilization of cornstalk makes low manganese dissolution ratio, In the research, pretreatment for cornstalk was proposed to improve manganese dissolution ratio. Cornstalk was preprocessed by a heated sulfuric acid solution （1.2 M of sulfuric acid concentration） for 10 min at 80℃. Thereafter, both the pretreated solution and the residue were used as a reductant for manganese leaching. This method not only exhibited superior activity for hydrolyzing cornstalk but also enhanced manganese dissolution. These effects were attributed to an increase in the amount of reductive sugars resulting from lignin hydrolysis. Through acid pretreatment for cornstalk, the manganese dissolution ratio was improved from 50.14% to 83.46%. The present work demonstrates for the first time the effective acid pretreatment of cornstalk to provide a cost-effective reductant for manganese leaching.
基金supported by CITIC Dameng Mining Industries Limited-Guangxi University Joint Research Institute of manganese resources utilization and advanced materials technology,Guangxi University-CITIC Dameng Mining Industries Limited Joint base of postgraduate cultivation,National Natural Science Foundation of China(No.11364003)Guangxi Innovation Driven Development Project(Nos.AA17204100,AA18118052)the Natural Science Foundation of Guangxi Province(No.2018GXNSFAA138186)。
文摘The organic carbon source coating LiFe_(x)Mn_(1-x)PO_(4)suffers from the problem of non-uniform carbon cladding.Too thick carbon cladding layer instead hinders the de-embedding of lithium ions.In this paper,we choose cornstalk as the carbon source,then LiFe_(0.5)Mn_(0.5)PO_(4)@cornstalk-C(LFMP@C-C)with 3D anchoring structure is prepared by the solvothermal method.The results show that the LFMP with cornstalk as the carbon source has better performance compared to the sucrose-coated LFMP material(LFMP@C).The discharge capacity of LFMP@C-C is 116 mAh/g for the first cycle at 1 C and the capacity retention rate is 94.0%after 500 cycles,and the discharge capacity of LFMP@C-C is more than 17.17%higher than that of LFMP@C.
基金The authors are grateful for the financial support by National Key R&D Program of China under Grant Number 2020YFA0710404the National Natural Science Foundation of China under grant number 51871216+1 种基金the LiaoNing Revitalization Talents Program,the State Key Laboratory for Modification of Chemical Fibers and Polymer Materials at Donghua Universitythe Opening Project of Jiangsu Province Key Laboratory of High-End Structural Materials under grant number hsm 1801,the Lu Jiaxi International Team Program supported by the K.C.Wong Education Foundation and CAS,and the Youth Innovation Promotion Association CAS.
文摘The replacement of synthetic foam materials using natural biological ones is of great significance for saving energy/resources and reducing environmental pollutions.Here we characterized the microstructure and mechanical properties of natural cornstalk pith,which has a large annual output yet lacks an effective exploitation,and evaluated its feasibility for applications as a substitute for synthetic foam materials.The cornstalk pith was revealed to be a cellular material composed of closed cells elongated along the growth direction of com plant and reinforced by well-aligned vascular bundles penetrating the foam matrix.The compressive behavior is featured by a stable stress plateau which is favorable for energy absorption with its mechanical properties largely dependent on the hydration state and loading configuration.In particular,the initial dimension and mechanical properties of cornstalk pith can be effectively recovered after deformation simply by hydration treatment owing to swelling effect caused by the turgor pressure from osmosis.The cornstalk pith demonstrates an outstanding combination of low density and high energy absorption efficiency among various foam materials,specifically with its plateau stress and energy absorption comparable or even superior to those of some typical synthetic foam materials.These along with the huge resources and good biodegradability make it a promising natural energy absorbing cellular material for replacing synthetic counterparts.
