Soil respiration is a main dynamic process of carbon cycle in wetland. It is important to contribute to global climate changes. Water table and nutritious availability are significant impact factors to influence respo...Soil respiration is a main dynamic process of carbon cycle in wetland. It is important to contribute to global climate changes. Water table and nutritious availability are significant impact factors to influence responses of CO2 emission from wetland soil to climate changes. Twenty-four wetland soil monoliths at 4 water-table positions and in 3 nitrogen status have been incubated to measure rates of CO2 emission from wetland soils in this study. Three static water-table controls and a fluctuant water-table control, with 3 nitrogen additions in every water-table control, were carried out. In no nitrogen addition treatment, high CO2 emissions were found at a static low water table (Ⅰ) and a fluctuant water table (Ⅳ), averaging 306.7mg/(m2·h) and 307.89mg/(m2·h), respectively, which were 51%-57% higher than that at static high water table (Ⅱ and Ⅲ). After nitrogen addition, however, highest CO2 emission was found at Ⅱ and lowest emission at Ⅲ. The results suggested that nutritious availability of wetland soil might be important to influence the effect of water table on the CO2 emission from the wetland soil. Nitrogen addition led to enhancing CO2 emissions from wetland soil, while the highest emission was found in 1N treatments other than in 2N treatments. In 3 nutritious treatments, low CO2 emissions at high water tables and high CO2 emissions at low water tables were also observed when water table fluctuated. Our results suggested that both water table changes and nutritious imports would effect the CO2 emission from wetland.展开更多
The equilibrium solubility of 2,4-diaminobenzenesulfonic acid and super solubility as well as metastable zone width were measured in(H_(2)SO_(4)+H_(2)O) system by the laser dynamic method at elevate temperature range ...The equilibrium solubility of 2,4-diaminobenzenesulfonic acid and super solubility as well as metastable zone width were measured in(H_(2)SO_(4)+H_(2)O) system by the laser dynamic method at elevate temperature range from 298.15 K to 338.15 K.2,4-Diaminobenzenesulfonic acid solubility dependence on the temperature and solvent composition were correlated by the modified Apelblat equation,(CNIBS)/Redlich-Kister model and Jouyban-Acree model.The correlated results by three correlation models were in good accord with the experimental values according to relative average deviations(RD),root-mean-square deviations(RMSD),and correlation coefficients(R^(2)).The metastable zone width increased with temperature and sulfuric acid content.The dissolution enthalpy,dissolution entropy and the Gibbs energy were calculated from the experimental values,which indicated that dissolution process of the 2,4-diaminobenzenesulfonic acid was endothermic.The solubility and calculation models of 2,4-diaminobenzenesulfonic acid in(sulfuric acid+water)system could provide the basic data to the crystallization and purifying of the 2,4-diaminobenzenesulfonic acid.展开更多
Obtaining the vertical distribution profile of trace gas is of great significance for studying the diffusion procedure of air pollution.In this article,a look-up table method based on multi-axis differential optical a...Obtaining the vertical distribution profile of trace gas is of great significance for studying the diffusion procedure of air pollution.In this article,a look-up table method based on multi-axis differential optical absorption spectroscopy(MAX-DOAS)technology is established for retrieving the tropospheric NO_(2) vertical distribution profiles.This method retrieves the aerosol extinction profiles with minimum cost function.Then,the aerosol extinction profiles and the atmospheric radiation transfer model(RTM)are employed to establish the look-up table for retrieving the NO_(2) vertical column densities(VCDs)and profiles.The measured NO_(2) differential slant column densities(DSCDs)are compared with the NO_(2) DSCDs simulated by the atmospheric RTM,and the NO_(2) VCDs,the weight factor of NO_(2) in the boundary layer,and the boundary layer height are obtained by the minimization process.The look-up table is established to retrieve NO_(2) VCDs based on MAX-DOAS measurements in Huaibei area,and the results are compared with the data from Copernicus Atmospheric Monitoring Service(CAMS)model.It is found that there are nearly consistent and the correlation coefficient R2 is more than 0.86.The results show that this technology provides a more convenient and accurate retrieval method for the stereoscopic monitoring of atmospheric environment.展开更多
In July 2009, the 2005 basic Japanese input/output table was publicized together with its physical transaction table. This research paper analyzed the 2005 IO （input/output） table to create building industry-related...In July 2009, the 2005 basic Japanese input/output table was publicized together with its physical transaction table. This research paper analyzed the 2005 IO （input/output） table to create building industry-related intensities and, at the same time, compared the building industry with industries at large for distribution margins and transportation. The analysis of distribution margins separately for middle and purchaser margins found that middle margins in the building industry are minor at 35% of the averages for all industries, while purchaser margins are sizable at 1.8 times, proving that it is an industry for which local production for local consumption is quite effective. CO2 emissions resulting from transportation in the building industry were calculated and concisely characterized. Although the ratio of transportation CO2 emissions to total CO2 emissions in each industry finds almost no difference between general industries and the building industry, transportation CO2 emissions per production value are two to three times heavier than those from general industries to be justified as a transportation-intensive industry.展开更多
The objective of this research is to quantify the EEC （embodied energy/CO2） of a building. The EEC represents the energy consumption and CO2 emissions at individual phases of a building＇s life-cycle, such as constr...The objective of this research is to quantify the EEC （embodied energy/CO2） of a building. The EEC represents the energy consumption and CO2 emissions at individual phases of a building＇s life-cycle, such as construction （including manufacture of materials and equipment）, renewal （including repair work） and demolition. Energy and CO2 emission intensities in terms of 401 sectors were calculated, using the 2005 I-O （input-output） table in Japan. According to our case study conducted from the construction phase to demolition, the EC （embodied CO2） of an office building used for 60 years is 12,044 t-CO2 and 1,093 kg-CO2/m^2 in total. CO2 equivalent emissions （CO2e） by Freon gases, contained in building materials, equipment and devices, were also calculated. As the results, CO2e by insulators was 2% of the building＇s EC and CO2e by refrigerants was 9%-12% of the building＇s EC. It is important to keep reducing emissions of Freon gases contained in refrigerators.展开更多
To mitigate the deleterious effects of clutter and jammer, modern radars have adopted adaptive processing techniques such as constant false alarm rate(CFAR) detectors which are widely used to prevent clutter and noise...To mitigate the deleterious effects of clutter and jammer, modern radars have adopted adaptive processing techniques such as constant false alarm rate(CFAR) detectors which are widely used to prevent clutter and noise interference from saturating the radar’s display and preventing targets from being obscured.This paper concerns with the detection analysis of the novel version of CFAR schemes(cell-averaging generalized trimmed-mean,CATM) in the presence of additional outlying targets other than the target under research. The spurious targets as well as the tested one are assumed to be fluctuating in accordance with the χ~2-model with two-degrees of freedom. In this situation, the processor performance is enclosed by the swerling models(SWI and SWII). Between these bounds, there is an important class of target fluctuation which is known as moderately fluctuating targets. The detection of this class has many practical applications. Structure of the CATM detector is described briefly. Detection performances for optimal, CAM, CA, trimmed-mean(TM) and ordered-statistic(OS) CFAR strategies have been analyzed and compared for desired probability of false alarm and determined size of the reference window. False alarm rate performance of these processors has been evaluated for different strengths of interfering signal and the effect of correlation among the target returns on the detection and false alarm performances has also been studied. Our numerical results show that, with a proper choice of trimming parameters,the novel model CAM presents an ideal detection performance outweighing that of the Neyman-Pearson detector on condition that the tested target obeys the SWII model in its fluctuation. Although the new models CAS and CAM can be treated as special cases of the CATM algorithm, their multi-target performance is modest even it has an enhancement relative to that of the classical CAcheme. Additionally, they fail to maintain the false alarm rate constant when the operating environment is of type target multiplicity. Moreover, the non-coherent integration of M pulses ameliorates the processor performance either it operates in homogeneous or multi-target environment.展开更多
文摘Soil respiration is a main dynamic process of carbon cycle in wetland. It is important to contribute to global climate changes. Water table and nutritious availability are significant impact factors to influence responses of CO2 emission from wetland soil to climate changes. Twenty-four wetland soil monoliths at 4 water-table positions and in 3 nitrogen status have been incubated to measure rates of CO2 emission from wetland soils in this study. Three static water-table controls and a fluctuant water-table control, with 3 nitrogen additions in every water-table control, were carried out. In no nitrogen addition treatment, high CO2 emissions were found at a static low water table (Ⅰ) and a fluctuant water table (Ⅳ), averaging 306.7mg/(m2·h) and 307.89mg/(m2·h), respectively, which were 51%-57% higher than that at static high water table (Ⅱ and Ⅲ). After nitrogen addition, however, highest CO2 emission was found at Ⅱ and lowest emission at Ⅲ. The results suggested that nutritious availability of wetland soil might be important to influence the effect of water table on the CO2 emission from the wetland soil. Nitrogen addition led to enhancing CO2 emissions from wetland soil, while the highest emission was found in 1N treatments other than in 2N treatments. In 3 nutritious treatments, low CO2 emissions at high water tables and high CO2 emissions at low water tables were also observed when water table fluctuated. Our results suggested that both water table changes and nutritious imports would effect the CO2 emission from wetland.
基金supported by Scientific and Technologial Innovation Programs of Higher Education Institutions in Shanxi。
文摘The equilibrium solubility of 2,4-diaminobenzenesulfonic acid and super solubility as well as metastable zone width were measured in(H_(2)SO_(4)+H_(2)O) system by the laser dynamic method at elevate temperature range from 298.15 K to 338.15 K.2,4-Diaminobenzenesulfonic acid solubility dependence on the temperature and solvent composition were correlated by the modified Apelblat equation,(CNIBS)/Redlich-Kister model and Jouyban-Acree model.The correlated results by three correlation models were in good accord with the experimental values according to relative average deviations(RD),root-mean-square deviations(RMSD),and correlation coefficients(R^(2)).The metastable zone width increased with temperature and sulfuric acid content.The dissolution enthalpy,dissolution entropy and the Gibbs energy were calculated from the experimental values,which indicated that dissolution process of the 2,4-diaminobenzenesulfonic acid was endothermic.The solubility and calculation models of 2,4-diaminobenzenesulfonic acid in(sulfuric acid+water)system could provide the basic data to the crystallization and purifying of the 2,4-diaminobenzenesulfonic acid.
基金the National Natural Science Foundation of China(Grant No.41875040)the Top-notch Talents Program in Universities of Anhui Province,China(Grant No.gxbjZD2020067)the Natural Science Research Projects of Universities in Anhui Province,China(Grant No.KJ2020A0029).
文摘Obtaining the vertical distribution profile of trace gas is of great significance for studying the diffusion procedure of air pollution.In this article,a look-up table method based on multi-axis differential optical absorption spectroscopy(MAX-DOAS)technology is established for retrieving the tropospheric NO_(2) vertical distribution profiles.This method retrieves the aerosol extinction profiles with minimum cost function.Then,the aerosol extinction profiles and the atmospheric radiation transfer model(RTM)are employed to establish the look-up table for retrieving the NO_(2) vertical column densities(VCDs)and profiles.The measured NO_(2) differential slant column densities(DSCDs)are compared with the NO_(2) DSCDs simulated by the atmospheric RTM,and the NO_(2) VCDs,the weight factor of NO_(2) in the boundary layer,and the boundary layer height are obtained by the minimization process.The look-up table is established to retrieve NO_(2) VCDs based on MAX-DOAS measurements in Huaibei area,and the results are compared with the data from Copernicus Atmospheric Monitoring Service(CAMS)model.It is found that there are nearly consistent and the correlation coefficient R2 is more than 0.86.The results show that this technology provides a more convenient and accurate retrieval method for the stereoscopic monitoring of atmospheric environment.
文摘In July 2009, the 2005 basic Japanese input/output table was publicized together with its physical transaction table. This research paper analyzed the 2005 IO （input/output） table to create building industry-related intensities and, at the same time, compared the building industry with industries at large for distribution margins and transportation. The analysis of distribution margins separately for middle and purchaser margins found that middle margins in the building industry are minor at 35% of the averages for all industries, while purchaser margins are sizable at 1.8 times, proving that it is an industry for which local production for local consumption is quite effective. CO2 emissions resulting from transportation in the building industry were calculated and concisely characterized. Although the ratio of transportation CO2 emissions to total CO2 emissions in each industry finds almost no difference between general industries and the building industry, transportation CO2 emissions per production value are two to three times heavier than those from general industries to be justified as a transportation-intensive industry.
文摘The objective of this research is to quantify the EEC （embodied energy/CO2） of a building. The EEC represents the energy consumption and CO2 emissions at individual phases of a building＇s life-cycle, such as construction （including manufacture of materials and equipment）, renewal （including repair work） and demolition. Energy and CO2 emission intensities in terms of 401 sectors were calculated, using the 2005 I-O （input-output） table in Japan. According to our case study conducted from the construction phase to demolition, the EC （embodied CO2） of an office building used for 60 years is 12,044 t-CO2 and 1,093 kg-CO2/m^2 in total. CO2 equivalent emissions （CO2e） by Freon gases, contained in building materials, equipment and devices, were also calculated. As the results, CO2e by insulators was 2% of the building＇s EC and CO2e by refrigerants was 9%-12% of the building＇s EC. It is important to keep reducing emissions of Freon gases contained in refrigerators.
文摘To mitigate the deleterious effects of clutter and jammer, modern radars have adopted adaptive processing techniques such as constant false alarm rate(CFAR) detectors which are widely used to prevent clutter and noise interference from saturating the radar’s display and preventing targets from being obscured.This paper concerns with the detection analysis of the novel version of CFAR schemes(cell-averaging generalized trimmed-mean,CATM) in the presence of additional outlying targets other than the target under research. The spurious targets as well as the tested one are assumed to be fluctuating in accordance with the χ~2-model with two-degrees of freedom. In this situation, the processor performance is enclosed by the swerling models(SWI and SWII). Between these bounds, there is an important class of target fluctuation which is known as moderately fluctuating targets. The detection of this class has many practical applications. Structure of the CATM detector is described briefly. Detection performances for optimal, CAM, CA, trimmed-mean(TM) and ordered-statistic(OS) CFAR strategies have been analyzed and compared for desired probability of false alarm and determined size of the reference window. False alarm rate performance of these processors has been evaluated for different strengths of interfering signal and the effect of correlation among the target returns on the detection and false alarm performances has also been studied. Our numerical results show that, with a proper choice of trimming parameters,the novel model CAM presents an ideal detection performance outweighing that of the Neyman-Pearson detector on condition that the tested target obeys the SWII model in its fluctuation. Although the new models CAS and CAM can be treated as special cases of the CATM algorithm, their multi-target performance is modest even it has an enhancement relative to that of the classical CAcheme. Additionally, they fail to maintain the false alarm rate constant when the operating environment is of type target multiplicity. Moreover, the non-coherent integration of M pulses ameliorates the processor performance either it operates in homogeneous or multi-target environment.
