To reduce the charge-coupled device(CCD)readout noise and improve the detection ability under low illumination and dim targets,a new low-noise CCD signal processing technology-CCD digital denoiseis gradually being emp...To reduce the charge-coupled device(CCD)readout noise and improve the detection ability under low illumination and dim targets,a new low-noise CCD signal processing technology-CCD digital denoiseis gradually being employed in aerospace detection and other fields.In this study,the main readout noise of CCD detectors and its characteristics are analyzed.A CCD digital denoise system and an experimental platform are designed as well as established by using a PCIe data acquisition card.According to the characteristics of readout noise,some digital filters are analyzed and designed based on distributed kernel coefficient,and the optimal kernel coefficients are obtained through iteration.Then,CCD signal and filter model are established,and the optimal filter is designed to apply to the digital denoise system.Finally,according to the image data obtained from the system,the performance of the digital denoise system and digital filtering algorithm is evaluated and compared.At 500 kHz and 1 MHz CCD readout rates,the denoising performance of the optimal filter designed in the experiment is 16%-32%higher than that of the digital filter with kernel distribution coefficient,and 50%-60%higher than that of the traditional correlated double sampling technology.展开更多
When sampling from a finite population there is often auxiliary information available on unit level. Such information can be used to improve the estimation of the target parameter. We show that probability samples tha...When sampling from a finite population there is often auxiliary information available on unit level. Such information can be used to improve the estimation of the target parameter. We show that probability samples that are well spread in the auxiliary space are balanced, or approximately balanced, on the auxiliary variables. A consequence of this balancing effect is that the Horvitz-Thompson estimator will be a very good estimator for any target variable that can be well approximated by a Lipschitz continuous function of the auxiliary variables. Hence we give a theoretical motivation for use of well spread probability samples. Our conclusions imply that well spread samples, combined with the Horvitz- Thompson estimator, is a good strategy in a varsity of situations.展开更多
This paper presents a low-power high-quality CMOS image sensor(CIS)using 1.5 V 4T pinned photodiode(4T-PPD)and dual correlated double sampling(dual-CDS)column-parallel single-slope ADC.A five-finger shaped pixel layer...This paper presents a low-power high-quality CMOS image sensor(CIS)using 1.5 V 4T pinned photodiode(4T-PPD)and dual correlated double sampling(dual-CDS)column-parallel single-slope ADC.A five-finger shaped pixel layer is proposed to solve image lag caused by low-voltage 4T-PPD.Dual-CDS is used to reduce random noise and the nonuniformity between columns.Dual-mode counting method is proposed to improve circuit robustness.A prototype sensor was fabricated using a 0.11μm CMOS process.Measurement results show that the lag of the five-finger shaped pixel is reduced by 80%compared with the conventional rectangular pixel,the chip power consumption is only 36 mW,the dynamic range is 67.3 dB,the random noise is only 1.55 e^(-)_(rms),and the figure-of-merit is only 1.98 e^(-)·nJ,thus realizing low-power and high-quality imaging.展开更多
The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arr...The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arrays(FPGAs).In this paper,we present a new design methodology which using FPAA as a powerful analog front-end processing platform in the smart sensory microsystem.The proposed FPAA contains 16 homogeneous mixed-grained Configurable Analog Blocks(CABs) which house a variety of processing elements especially the proposed fine-grained Core Configurable Amplifiers(CCAs).The high flexible CABs allow the FPAA operating in both continuous-time and discrete-time approaches suitable to support variety of sensors.To reduce the nonideal parasitic effects and save area,the fat-tree interconnection network is adopted in this FPAA.The functionality of this FPAA is demonstrated through embedding of voltage and capacitive sensor signal readout circuits and a configurable band pass filter.The minimal detectable voltage and capacitor achieves 38 uV and 8.3 aF respectively within 100 Hz sensor bandwidth.The power consumption comparison of CCA in three applications shows that the FPAA has high power efficiency.And the simulation results also show that the FPAA has good tolerance with wide PVT variations.展开更多
Recent noteworthy developments in the field of two-dimensional(2D) correlation spectroscopy are reviewed.2D correlation spectroscopy has become a very popular tool due to its versatility and relative ease of use.The...Recent noteworthy developments in the field of two-dimensional(2D) correlation spectroscopy are reviewed.2D correlation spectroscopy has become a very popular tool due to its versatility and relative ease of use.The technique utilizes a spectroscopic or other analytical probe from a number of selections for a broad range of sample systems by employing different types of external perturbations to induce systematic variations in intensities of spectra.Such spectral intensity variations are then converted into2 D spectra by a form of correlation analysis for subsequent interpretation.Many different types of 2D correlation approaches have been proposed.In particular,2D hetero-correlation and multiple perturbation correlation analyses,including orthogonal sample design scheme,are discussed in this review.Additional references to other important developments in the field of 2D correlation spectroscopy,such as projection correlation and codistribution analysis,were also provided.展开更多
A switched capacitor bandgap voltage reference with correlated double sampling structure embedded in a temperature sensor is implemented in a standard 0.35 um CMOS process. Due to the smaller change of the op-amp's o...A switched capacitor bandgap voltage reference with correlated double sampling structure embedded in a temperature sensor is implemented in a standard 0.35 um CMOS process. Due to the smaller change of the op-amp's output voltage, this topology is very suitable for low power applications. In addition, errors caused by the finite op-amp gain, input offset voltage, and 1/f noise are eliminated with the correlated double sampling technique. Additionally, two-level process calibration techniques are designed to minimize the process spread. Finally, a method of getting a full period valid reference voltage output is discussed and experimental results are provided to verify the effectiveness of the proposed structure.展开更多
Let{Xk,i;k≥1,i≥1}be an array of random variables,{Xk;k≥1}be a strictly stationaryα-mixing sequence,where Xk=(Xk,1,Xk,2,...).Let{pn;n≥1}be a sequence of positive integers such that c1≤p n n≤c2,where c1,c2>0.I...Let{Xk,i;k≥1,i≥1}be an array of random variables,{Xk;k≥1}be a strictly stationaryα-mixing sequence,where Xk=(Xk,1,Xk,2,...).Let{pn;n≥1}be a sequence of positive integers such that c1≤p n n≤c2,where c1,c2>0.In this paper,we obtain the asymptotic distributions of the largest entries Ln=max1≤i<j≤pn|ρ(n)ij|of the sample correlation matrices,whereρ(n)ij denotes the Pearson correlation coefficient between X(i)and X(j),X(i)=(X1,i,X2,i,...).The asymptotic distributions of Ln is derived by using the Chen–Stein Poisson approximation method.展开更多
A differential approach for exact fixed-node quantum Monte Carlo calculation was proposed in this paper. This new algorithm can be used to directly compute the energy differential between two systems in exact fixed-no...A differential approach for exact fixed-node quantum Monte Carlo calculation was proposed in this paper. This new algorithm can be used to directly compute the energy differential between two systems in exact fixed-node quantum Monte Carlo process, making the statistical error of calculation reduce to order of 10^-2 kJ/mol and recover about more than 90% of the correlation energy. The approach was employed to set up a potential energy surface of a molecule, through a model of rigid move, and Jacobi transformation utilized to make energy calculation for two configurations of a molecule having good positive correlation. So, an accurate energy differential could be obtained, and the potential energy surface with good quality depicted. This novel algorithm was used to study the potential energy curve of the ground state of BH and the potential energy surface of H3, and could be also applied to study other related fields such as molecular spectroscopy and the energy variation of chemical reactions.展开更多
A differential approach for self-optimizing diffusion Monte Carlo calculation was proposed in this paper, which is a new algorithm combining three techniques such as optimizing, diffusion and correlation sampling. Thi...A differential approach for self-optimizing diffusion Monte Carlo calculation was proposed in this paper, which is a new algorithm combining three techniques such as optimizing, diffusion and correlation sampling. This method can be used to directly compute the energy differential between two system in the diffusion process, making the statistical error of calculation be reduced to Order of 10?-5 hartree, and recover about more than 80% of the correlation. We employed this approach to set up a potential energy surface of a molecule, used a “rigid move” model, and utilized Jacobi transformation to make energy calculation for two configurations of a molecule having good positive correlation. So, an accurate energy differential could be obtained, and the potential energy surface with good quality can be depicted. In calculation, a technique called “post-equilibrium remaining sample” was set up firstly, which can save about 50% of computation expense. This novel algorithm was used to study the potential as molecular spectroscopy and the energy variation in chemical reactions.展开更多
Video signal processing needs high signal-to-noise ratio (SNR) in high-speed time delay and integration charge coupled devices (TDICCD). To solve this problem, this article first analyzes the characteristics of th...Video signal processing needs high signal-to-noise ratio (SNR) in high-speed time delay and integration charge coupled devices (TDICCD). To solve this problem, this article first analyzes the characteristics of the output video signal of a new type of high-speed TDICCD and its operation principle. Then it studies the correlation double sample (CDS) method of reducing noise. Following that a synthesized processing method is proposed, including correlation double sample, programmable gain control, line calibration and digital offset control, etc. Among the methods, XRD98L59 is a video signal processor for the charge coupled device (CCD). Application of this processor to one kind of high-speed TDICCD with eight output ports achieves perfect video images. The experiment result indicates that the SNR of the images reaches about 50 dB. The video signal processing for high-speed multi-channel TDICCD is implemented, which meets the required project index.展开更多
A newΣΔmodulator architecture for thermal vacuum sensor ASICs is proposed.The micro-hotplate thermal vacuum sensor fabricated by surface-micrornachining technology can detect the gas pressure from 1 to 10;Pa. The am...A newΣΔmodulator architecture for thermal vacuum sensor ASICs is proposed.The micro-hotplate thermal vacuum sensor fabricated by surface-micrornachining technology can detect the gas pressure from 1 to 10;Pa. The amplified differential output voltage signal of the sensor feeds to theΣΔmodulator to be converted into digital domain.The presentedΣΔmodulator makes use of a feed-forward path to suppress the harmonic distortions and attain high linearity.Compared with other feed-forward architectures presented before,the circuit complexity,chip area and power dissipation of the proposed architecture are significantly decreased.The correlated double sampling technique is introduced in the 1st integrator to reduce the flicker noise.The measurement results demonstrate that the modulator achieves an SNDR of 79.7 dB and a DR of 80 dB over a bandwidth of 7.8 kHz at a sampling rate of 4 MHz.The circuit has been fabricated in a 0.5μm 2P3M standard CMOS technology.It occupies an area of 5 mm;and dissipates 9 mW from a single 3 V power supply.The performance of the modulator meets the requirements of the considered application.展开更多
This paper presents a high-speed column-parallel cyclic analog-to-digital converter(ADC) for a CMOS image sensor.A correlated double sampling(CDS) circuit is integrated in the ADC,which avoids a stand-alone CDS ci...This paper presents a high-speed column-parallel cyclic analog-to-digital converter(ADC) for a CMOS image sensor.A correlated double sampling(CDS) circuit is integrated in the ADC,which avoids a stand-alone CDS circuit block.An offset cancellation technique is also introduced,which reduces the column fixed-pattern noise(FPN) effectively.One single channel ADC with an area less than 0.02 mm^2 was implemented in a 0.13μm CMOS image sensor process.The resolution of the proposed ADC is 10-bit,and the conversion rate is 1.6 MS/s. The measured differential nonlinearity and integral nonlinearity are 0.89 LSB and 6.2 LSB together with CDS, respectively.The power consumption from 3.3 V supply is only 0.66 mW.An array of 48 10-bit column-parallel cyclic ADCs was integrated into an array of CMOS image sensor pixels.The measured results indicated that the ADC circuit is suitable for high-speed CMOS image sensors.展开更多
Readout noise is a critical parameter for characterizing the performance of charge-coupled devices(CCDs), which can be greatly reduced by the correlated double sampling(CDS) circuit. However, a conventional CDS ci...Readout noise is a critical parameter for characterizing the performance of charge-coupled devices(CCDs), which can be greatly reduced by the correlated double sampling(CDS) circuit. However, a conventional CDS circuit inevitably introduces new noise since it consists of several active analog components such as operational amplifiers. This paper proposes a digital CDS circuit technique, which transforms the pre-amplified CCD signal into a train of digital presentations by a high-speed data acquisition card directly without the noisy CDS circuit,then implements the digital CDS algorithm through a numerical method. A readout noise of 3.3 e- and an energy resolution of 121 e V@5.9 ke V can be achieved via the digital CDS technique.展开更多
The special purpose Monte Carlo program McMesh was used to study neutron transport in coal slurries for on stream determination of the slurry parameters. McMesh uses the mesh weight window method as the major variance...The special purpose Monte Carlo program McMesh was used to study neutron transport in coal slurries for on stream determination of the slurry parameters. McMesh uses the mesh weight window method as the major variance reduction technique with other methods such as exponential transforms and correlated sampling included as options. There was good agreement between the calculated results from McMesh and from MCNP, a general Monte Carlo program, but McMesh was more efficient and more convenient.展开更多
基金the National Program on Key Basic Research Project(973 Program)(No.6132570201).
文摘To reduce the charge-coupled device(CCD)readout noise and improve the detection ability under low illumination and dim targets,a new low-noise CCD signal processing technology-CCD digital denoiseis gradually being employed in aerospace detection and other fields.In this study,the main readout noise of CCD detectors and its characteristics are analyzed.A CCD digital denoise system and an experimental platform are designed as well as established by using a PCIe data acquisition card.According to the characteristics of readout noise,some digital filters are analyzed and designed based on distributed kernel coefficient,and the optimal kernel coefficients are obtained through iteration.Then,CCD signal and filter model are established,and the optimal filter is designed to apply to the digital denoise system.Finally,according to the image data obtained from the system,the performance of the digital denoise system and digital filtering algorithm is evaluated and compared.At 500 kHz and 1 MHz CCD readout rates,the denoising performance of the optimal filter designed in the experiment is 16%-32%higher than that of the digital filter with kernel distribution coefficient,and 50%-60%higher than that of the traditional correlated double sampling technology.
文摘When sampling from a finite population there is often auxiliary information available on unit level. Such information can be used to improve the estimation of the target parameter. We show that probability samples that are well spread in the auxiliary space are balanced, or approximately balanced, on the auxiliary variables. A consequence of this balancing effect is that the Horvitz-Thompson estimator will be a very good estimator for any target variable that can be well approximated by a Lipschitz continuous function of the auxiliary variables. Hence we give a theoretical motivation for use of well spread probability samples. Our conclusions imply that well spread samples, combined with the Horvitz- Thompson estimator, is a good strategy in a varsity of situations.
基金supported by the National Key R&D Program of China(2019YFB2204304).
文摘This paper presents a low-power high-quality CMOS image sensor(CIS)using 1.5 V 4T pinned photodiode(4T-PPD)and dual correlated double sampling(dual-CDS)column-parallel single-slope ADC.A five-finger shaped pixel layer is proposed to solve image lag caused by low-voltage 4T-PPD.Dual-CDS is used to reduce random noise and the nonuniformity between columns.Dual-mode counting method is proposed to improve circuit robustness.A prototype sensor was fabricated using a 0.11μm CMOS process.Measurement results show that the lag of the five-finger shaped pixel is reduced by 80%compared with the conventional rectangular pixel,the chip power consumption is only 36 mW,the dynamic range is 67.3 dB,the random noise is only 1.55 e^(-)_(rms),and the figure-of-merit is only 1.98 e^(-)·nJ,thus realizing low-power and high-quality imaging.
基金Supported by the CAS/SAFEA International Partnership Program for Creative Research Teams,National High Technology Research and Develop Program of China(2012AA012301)National Science and Technology Major Project of China(2013ZX03006004)
文摘The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arrays(FPGAs).In this paper,we present a new design methodology which using FPAA as a powerful analog front-end processing platform in the smart sensory microsystem.The proposed FPAA contains 16 homogeneous mixed-grained Configurable Analog Blocks(CABs) which house a variety of processing elements especially the proposed fine-grained Core Configurable Amplifiers(CCAs).The high flexible CABs allow the FPAA operating in both continuous-time and discrete-time approaches suitable to support variety of sensors.To reduce the nonideal parasitic effects and save area,the fat-tree interconnection network is adopted in this FPAA.The functionality of this FPAA is demonstrated through embedding of voltage and capacitive sensor signal readout circuits and a configurable band pass filter.The minimal detectable voltage and capacitor achieves 38 uV and 8.3 aF respectively within 100 Hz sensor bandwidth.The power consumption comparison of CCA in three applications shows that the FPAA has high power efficiency.And the simulation results also show that the FPAA has good tolerance with wide PVT variations.
文摘Recent noteworthy developments in the field of two-dimensional(2D) correlation spectroscopy are reviewed.2D correlation spectroscopy has become a very popular tool due to its versatility and relative ease of use.The technique utilizes a spectroscopic or other analytical probe from a number of selections for a broad range of sample systems by employing different types of external perturbations to induce systematic variations in intensities of spectra.Such spectral intensity variations are then converted into2 D spectra by a form of correlation analysis for subsequent interpretation.Many different types of 2D correlation approaches have been proposed.In particular,2D hetero-correlation and multiple perturbation correlation analyses,including orthogonal sample design scheme,are discussed in this review.Additional references to other important developments in the field of 2D correlation spectroscopy,such as projection correlation and codistribution analysis,were also provided.
基金Project supported by the National Science and Technology Major Projects of China(No.2012ZX02503-005)the Research Program of Science and Technology Commission of Shanghai(No.11511500903)
文摘A switched capacitor bandgap voltage reference with correlated double sampling structure embedded in a temperature sensor is implemented in a standard 0.35 um CMOS process. Due to the smaller change of the op-amp's output voltage, this topology is very suitable for low power applications. In addition, errors caused by the finite op-amp gain, input offset voltage, and 1/f noise are eliminated with the correlated double sampling technique. Additionally, two-level process calibration techniques are designed to minimize the process spread. Finally, a method of getting a full period valid reference voltage output is discussed and experimental results are provided to verify the effectiveness of the proposed structure.
基金National Natural Science Foundation of China(Grant Nos.11771178 and 12171198)the Science and Technology Development Program of Jilin Province(Grant No.20210101467JC)+1 种基金Science and Technology Program of Jilin Educational Department during the“13th Five-Year”Plan Period(Grant No.JJKH20200951KJ)Fundamental Research Funds for the Central Universities。
文摘Let{Xk,i;k≥1,i≥1}be an array of random variables,{Xk;k≥1}be a strictly stationaryα-mixing sequence,where Xk=(Xk,1,Xk,2,...).Let{pn;n≥1}be a sequence of positive integers such that c1≤p n n≤c2,where c1,c2>0.In this paper,we obtain the asymptotic distributions of the largest entries Ln=max1≤i<j≤pn|ρ(n)ij|of the sample correlation matrices,whereρ(n)ij denotes the Pearson correlation coefficient between X(i)and X(j),X(i)=(X1,i,X2,i,...).The asymptotic distributions of Ln is derived by using the Chen–Stein Poisson approximation method.
基金Project supported by the National Natural Science Foundation of China (No. 20173014) and the Natural Science Foundation of Hunan Province.
文摘A differential approach for exact fixed-node quantum Monte Carlo calculation was proposed in this paper. This new algorithm can be used to directly compute the energy differential between two systems in exact fixed-node quantum Monte Carlo process, making the statistical error of calculation reduce to order of 10^-2 kJ/mol and recover about more than 90% of the correlation energy. The approach was employed to set up a potential energy surface of a molecule, through a model of rigid move, and Jacobi transformation utilized to make energy calculation for two configurations of a molecule having good positive correlation. So, an accurate energy differential could be obtained, and the potential energy surface with good quality depicted. This novel algorithm was used to study the potential energy curve of the ground state of BH and the potential energy surface of H3, and could be also applied to study other related fields such as molecular spectroscopy and the energy variation of chemical reactions.
基金Project (No. 29773036) supperted by the National Natural Science Foundation of China.
文摘A differential approach for self-optimizing diffusion Monte Carlo calculation was proposed in this paper, which is a new algorithm combining three techniques such as optimizing, diffusion and correlation sampling. This method can be used to directly compute the energy differential between two system in the diffusion process, making the statistical error of calculation be reduced to Order of 10?-5 hartree, and recover about more than 80% of the correlation. We employed this approach to set up a potential energy surface of a molecule, used a “rigid move” model, and utilized Jacobi transformation to make energy calculation for two configurations of a molecule having good positive correlation. So, an accurate energy differential could be obtained, and the potential energy surface with good quality can be depicted. In calculation, a technique called “post-equilibrium remaining sample” was set up firstly, which can save about 50% of computation expense. This novel algorithm was used to study the potential as molecular spectroscopy and the energy variation in chemical reactions.
文摘Video signal processing needs high signal-to-noise ratio (SNR) in high-speed time delay and integration charge coupled devices (TDICCD). To solve this problem, this article first analyzes the characteristics of the output video signal of a new type of high-speed TDICCD and its operation principle. Then it studies the correlation double sample (CDS) method of reducing noise. Following that a synthesized processing method is proposed, including correlation double sample, programmable gain control, line calibration and digital offset control, etc. Among the methods, XRD98L59 is a video signal processor for the charge coupled device (CCD). Application of this processor to one kind of high-speed TDICCD with eight output ports achieves perfect video images. The experiment result indicates that the SNR of the images reaches about 50 dB. The video signal processing for high-speed multi-channel TDICCD is implemented, which meets the required project index.
基金Project supported by the National Natural Science Foundation of China(No.90607003).
文摘A newΣΔmodulator architecture for thermal vacuum sensor ASICs is proposed.The micro-hotplate thermal vacuum sensor fabricated by surface-micrornachining technology can detect the gas pressure from 1 to 10;Pa. The amplified differential output voltage signal of the sensor feeds to theΣΔmodulator to be converted into digital domain.The presentedΣΔmodulator makes use of a feed-forward path to suppress the harmonic distortions and attain high linearity.Compared with other feed-forward architectures presented before,the circuit complexity,chip area and power dissipation of the proposed architecture are significantly decreased.The correlated double sampling technique is introduced in the 1st integrator to reduce the flicker noise.The measurement results demonstrate that the modulator achieves an SNDR of 79.7 dB and a DR of 80 dB over a bandwidth of 7.8 kHz at a sampling rate of 4 MHz.The circuit has been fabricated in a 0.5μm 2P3M standard CMOS technology.It occupies an area of 5 mm;and dissipates 9 mW from a single 3 V power supply.The performance of the modulator meets the requirements of the considered application.
基金supported by the National Natural Science Foundation of China(Nos.60976023,61234003)the Special Funds for Major State Basic Research Project of China(No.2011CB932902)
文摘This paper presents a high-speed column-parallel cyclic analog-to-digital converter(ADC) for a CMOS image sensor.A correlated double sampling(CDS) circuit is integrated in the ADC,which avoids a stand-alone CDS circuit block.An offset cancellation technique is also introduced,which reduces the column fixed-pattern noise(FPN) effectively.One single channel ADC with an area less than 0.02 mm^2 was implemented in a 0.13μm CMOS image sensor process.The resolution of the proposed ADC is 10-bit,and the conversion rate is 1.6 MS/s. The measured differential nonlinearity and integral nonlinearity are 0.89 LSB and 6.2 LSB together with CDS, respectively.The power consumption from 3.3 V supply is only 0.66 mW.An array of 48 10-bit column-parallel cyclic ADCs was integrated into an array of CMOS image sensor pixels.The measured results indicated that the ADC circuit is suitable for high-speed CMOS image sensors.
基金Supported by National Natural Science Foundation of China(10978002)
文摘Readout noise is a critical parameter for characterizing the performance of charge-coupled devices(CCDs), which can be greatly reduced by the correlated double sampling(CDS) circuit. However, a conventional CDS circuit inevitably introduces new noise since it consists of several active analog components such as operational amplifiers. This paper proposes a digital CDS circuit technique, which transforms the pre-amplified CCD signal into a train of digital presentations by a high-speed data acquisition card directly without the noisy CDS circuit,then implements the digital CDS algorithm through a numerical method. A readout noise of 3.3 e- and an energy resolution of 121 e V@5.9 ke V can be achieved via the digital CDS technique.
文摘The special purpose Monte Carlo program McMesh was used to study neutron transport in coal slurries for on stream determination of the slurry parameters. McMesh uses the mesh weight window method as the major variance reduction technique with other methods such as exponential transforms and correlated sampling included as options. There was good agreement between the calculated results from McMesh and from MCNP, a general Monte Carlo program, but McMesh was more efficient and more convenient.