A long time immersion experiment of mortar specimens is carried out to investigate their degradation mechanism by sulfuric acid.Water-cement ratios of mortar are ranging from 0.5 to 0.7 and the pH value of sulfuric ac...A long time immersion experiment of mortar specimens is carried out to investigate their degradation mechanism by sulfuric acid.Water-cement ratios of mortar are ranging from 0.5 to 0.7 and the pH value of sulfuric acid is 3.5 and 4.0 respectively.The pH meter is used to monitor the soak solution and the titration sulfuric acid with given concentration is added to maintain original pH value,through which the acid consumption of mortar is recorded.A theoretical reaction rate model is also proposed based on concentration boundary layer model.The results show that theoretical model fits the experimental results well and the corrosion mechanism can be modeled by a diffusion process accompanied with an irreversible chemical reaction when pH value of soak solution is no less than 3.5.展开更多
The primary issue for the commercialization of proton exchange membrane fuel cell（PEMFC） is the carbon corrosion of support under start-up/shut-down conditions. In this study, we employ the nanostructured graphitize...The primary issue for the commercialization of proton exchange membrane fuel cell（PEMFC） is the carbon corrosion of support under start-up/shut-down conditions. In this study, we employ the nanostructured graphitized carbon induced by heat-treatment. The degree of graphitization starts to increase between 900 and 1300 ℃ as evidenced by the change of specific surface area, interlayer spacing, and ID/IG value. Pt nanoparticles are deposited on fresh carbon black（Pt/CB） and carbon heat-treated at 1700 ℃（Pt/HCB17） with similar particle size and distribution. Electrochemical characterization demonstrates that the Pt/HCB17 shows higher activity than the Pt/CB due to the inefficient microporous structure of amorphous carbon for the oxygen reduction reaction. An accelerating potential cycle between 1.0 and 1.5 V for the carbon corrosion is applied to examine durability at a single cell under the practical start-up/shutdown conditions. The Pt/HCB17 catalyst shows remarkable durability after 3000 potential cycles. The Pt/HCB17 catalyst exhibits a peak power density gain of 3%, while the Pt/CB catalyst shows 65% loss of the initial peak power density. As well, electrochemical surface area and mass activity of Pt/HCB17 catalyst are even more stable than those of the Pt/CB catalyst. Consequently, the high degree of graphitization is essential for the durability of fuel cells in practical start-up/shut-down conditions due to enhancing the strong interaction of Pt and π-bonds in graphitized carbon.展开更多
基金Funded by the National Natural Science Foundation of China(No.51078175)Natural Science Foundation of Yunnan Province (No.2008E038M)Education Foundation of Yunnan Province(No. 08Y0066)
文摘A long time immersion experiment of mortar specimens is carried out to investigate their degradation mechanism by sulfuric acid.Water-cement ratios of mortar are ranging from 0.5 to 0.7 and the pH value of sulfuric acid is 3.5 and 4.0 respectively.The pH meter is used to monitor the soak solution and the titration sulfuric acid with given concentration is added to maintain original pH value,through which the acid consumption of mortar is recorded.A theoretical reaction rate model is also proposed based on concentration boundary layer model.The results show that theoretical model fits the experimental results well and the corrosion mechanism can be modeled by a diffusion process accompanied with an irreversible chemical reaction when pH value of soak solution is no less than 3.5.
文摘The primary issue for the commercialization of proton exchange membrane fuel cell（PEMFC） is the carbon corrosion of support under start-up/shut-down conditions. In this study, we employ the nanostructured graphitized carbon induced by heat-treatment. The degree of graphitization starts to increase between 900 and 1300 ℃ as evidenced by the change of specific surface area, interlayer spacing, and ID/IG value. Pt nanoparticles are deposited on fresh carbon black（Pt/CB） and carbon heat-treated at 1700 ℃（Pt/HCB17） with similar particle size and distribution. Electrochemical characterization demonstrates that the Pt/HCB17 shows higher activity than the Pt/CB due to the inefficient microporous structure of amorphous carbon for the oxygen reduction reaction. An accelerating potential cycle between 1.0 and 1.5 V for the carbon corrosion is applied to examine durability at a single cell under the practical start-up/shutdown conditions. The Pt/HCB17 catalyst shows remarkable durability after 3000 potential cycles. The Pt/HCB17 catalyst exhibits a peak power density gain of 3%, while the Pt/CB catalyst shows 65% loss of the initial peak power density. As well, electrochemical surface area and mass activity of Pt/HCB17 catalyst are even more stable than those of the Pt/CB catalyst. Consequently, the high degree of graphitization is essential for the durability of fuel cells in practical start-up/shut-down conditions due to enhancing the strong interaction of Pt and π-bonds in graphitized carbon.
