Extraction, Production and Quality Evaluation of Margarine from Oil Extracted from Waste Biomass Peels of Avocado and Virgin Coconut Oil, Using Chitosan from Reared Shells as Preservative

The production and consumption of avocado pears generates tons of wastes, mainly the pear peels which are usually discarded, although they have been reported to contain important phyto-chemicals with biological activities. The adverse health effect associated with the consumption of saturated lipid based foods has ignited research on reformulation of lipid based foods to eliminate Trans Fatty Acids (TFAs). This study was thus aimed at the extraction and characterization of oil from Avocado Peels (APO) and evaluation of the quality of margarine produced from it. Five verities of pear were used for oil extraction by soxhlet method and physiochemical, oxidative, functional and antioxidant characterization was done. Margarines were formulated using a central composite design using oil blends of APO and Virgin Coconut Oil (VCO) with an oil ratio of 10:90, 40:60, 70:30 respectively, varied blending speed, blending time, and chitosan concentration. Samples were characterized and the effect of process parameters on the physiochemical and functional properties of the margarine studied. Optimized conditions were used to produce samples for sensory evaluation. Color, spreadability, aroma, taste and general acceptability was evaluated using ranking difference test. The results showed that the yield, density, and iodine values of APOs oils ranged from 14.91 ± 0.18 to 11.76 ± 0.46;0.93 ± 0.001 to 0.99 ± 0.1;46.63 ± 1.70 to 52.4 ± 0.63, their acid values, TBA and PV values ranged from 1.42 ± 0.39 to 1.97 ± 0.5;0.11 ± 0.002 to 0.18 ± 0.04;and 2.72 ± 0.14 to 4.43 ± 0.36 respectively, with Brogdon avocado peel variety having the overall best properties prepared blends of trans-free APO margarines showed that increase in APO ratio decreased melting point, increased oxidative stability and reduced moisture content of margarine samples. Chitosan addition leads to decrease moisture content and increase functional properties. VCO lead to increase in phenolic and flavonoid content of the margarines. Samples were spreadable and palatable with R20 being most palatable and the most accepted being R26 with a mean score of 7.07 ± 0.70. Decrease in color intensity increased acceptability. This study therefore demonstrated that avocado peel waste biomass can be valorized by using it as raw material for oil extraction, which can serve as good material for the production of trans-free margarines with good oxidative stability, functional and antioxidant properties.

A Comparative Investigation of the Biodegradation Behaviour of Linseed Oil-Based Cross-Linked Composites Filled with Industrial Waste Materials in Two Different Soils

The biodegradation of polymeric biocomposites formed from epoxidized linseed oil and various types of fillers(pine needles,pine bark,grain mill waste,rapeseed cake)and a control sample without filler was studied during 180 days of exposure to two types of forest soil:deciduous and coniferous.The weight loss,morphological,and structural changes of polymer composites were noticed after 180 days of the soil burial test.The greatest weight loss of all tested samples was observed in coniferous forest soil(41.8%–63.2%),while in deciduous forest soil,it ranged between 37.7%and 42.3%.The most significant changes in the intensities of the signals evaluated by attenuated total reflectance infrared spectroscopy,as well as morphological changes determined by scanning electron microscopy,were assessed for polymer composite with rapeseed cake and specimen without filler in coniferous forest soil and are in a good agreement with weight loss results.Whereas significantly lower changes in weight loss,morphology,and structure of polymeric film with pine bark were noticed in both soils.It was suggested that fungi of Trichoderma,Penicillium,Talaromyces and Clonostachys genera are the possible soil microorganisms that degrade linseed oil-based cross-linked polymer composites.Moreover,the novel polymer composites have the potential to be an environmentally friendly alternative to petroleum-based mulching films.

Cottonseed Protein, Oil, and Mineral Nutrition in Near-Isogenic <i>Gossypium hirsutum</i>Cotton Lines Expressing Leaf Color Phenotypes under Field Conditions

Information about the effects of phenotype traits on cottonseed protein, oil, and nutrients is scarce. The objective of this research was to investigate the effects of leaf color trait on seed nutrition in near-isogenic Gossypium hirsutum cotton expressing green (G) and yellow (Y) leaf color phenotypes. Our hypothesis was that leaf color can influence the accumulation of nutrients in seeds. Sets of isogenic lines were: DES 119 (G) and DES 119 (Y);DP 5690 (G) and DP 5690 (Y);MD 51ne (G) and MD 51ne (Y);SG 747 (G) and SG 747 (Y). Each NIL set is 98.44 % identical. Parent line SA 30 (P) was used as the control. The experiment was repeated for two years (2014 and 2015). The results showed that, in 2014, seed oil in DES 119 (G) and SG 747 (G) were significantly higher than their equivalent yellow lines. Green lines showed higher content of phosphorus compared with yellow lines. Higher levels of Cu, Fe, Mn, Ni, and Zn were recorded in DES 119 (G) and MD 51ne (G). In 2015, seed protein, oil, C, N, P, B, Cu, and Fe were higher in green lines than in yellow lines. There was a significant correlation between protein and nutrients, and between oil and nutrients in 2015, but not in 2014 as the temperature was warmer in 2015 than in 2014. This research demonstrated that leaf color can alter seed composition and mineral nutrition under certain environmental growing conditions such as temperature.

Surfactant-Enhanced Washing of Soils Contaminated with Wasted-Automotive Oils and the Quality of the Produced Wastewater

An old automotive industrial site located at Mexico City with many years of operation and contaminated with heavy oil hydrocarbons, particularly spent oils, was assessed for restoration using the surfactant enhanced soil washing (SESW) process. The main goal of this study was to characterize the contaminated soil in terms of TPHs, BTEX, PAHs, and metals contents as well as microbiologically (total heterotrophs and specific degrading microorganisms). We also aimed to determine the surfactant type and concentration to be used in the SESW process for the automotive waste oil contaminated soil. At the end, sixteen kg of contaminated soil were washed and the produced wastewater (approximately 40 L) was characterized in terms of COD, BOD;solids, and other physico-chemical parameters. The soil contained about 14,000 mg of TPH/kg soil (heavy fraction), 0.13 mg/kg of benzo (k) fluoranthene and 0.07 mg/kg of benzo (a) pyrene as well as traces of some metals. Metals concentrations were always under the maximum concentration levels suggested by Mexican regulations. 15 different surfactants were used to identify the one with the capability to achieve the highest TPH removal. Surfactants included 5 anionics, 2 zwitterionic, 5 nonionics and 3 natural gums. Sulfopon 30 at a concentration of 0.5% offered the best surfactant performance. The TPH removals employing the different surfactants were in the range from 38% to 68%, in comparison to the soil washing with water (10% of TPH removal). Once the surfactant was selected, 70 kg of soil were washed and the resulting water contained approximately 1300 mg/L of COD, 385 mg/L of BOD (BOD/COD = 0.29), 122 mg/L of MBAS, and 212 mg/L of oil and greases, among other contaminants.

Cottonseed Oil as Promising Biodiesel in Future

With recent increases in petroleum prices,there is renewed interest in vegetable oil and their derivatives as alternative fuels for diesel engines.There are more than 350 oil-bearing crops identified,

Hydroxy- and Aminoethyl Imidazolines of Cottonseed Oil Fatty Acids as Additives for Diesel Fuels

In the research, aminoethyl imidazolines of cottonseed oil fatty acids with diethylenetriamine have been synthesized using the ultrasonic device creating the effect of cavitation. The yield of imidazolines was 90% - 95%. The influence of the synthesized imidazolines on lubricity quality of low sulfur diesel fuels having low lubricating quality was studied. The results showed that at concentrations 200 - 250 ppm the synthesized imidazolines can be applied as additives enhancing lubricity quality of diesel fuels.

Concentration of linoleic acid from cottonseed oil by starch complexation

The extraction of linoleic acid from fatty acids(FA) of the cottonseed oil using starch–FA complexes was developed for the first time. We showed that starch can form inclusion complexes of different strengths with FA and that the different strengths stem from the differences in chain length, degree of unsaturation, and position of double bonds of FA. The optimal separation conditions were determined as follows: The inclusion temperature is 69 °C, the inclusion time is 30 min, the starch/FA mass ratio is 10:1, and the ratio of the volume of methanol–water solution and the mass of FA is 18:1. Compared to urea inclusion complexation, starch complexation has milder reaction temperature and shorter reaction time. Under these conditions, linoleic acid can be concentrated from 38.9% to 70.04% by one-off extraction. Moreover, the experimental results demonstrate the almost perfect reusability of starch. These results show that starch complexation is a promising method that can be used to obtain highly concentrated linoleic acid from cottonseed oil.

Individual and interactive influences of elevated air temperature and soil drought at the flowering and boll-forming stage on cottonseed yield and nutritional quality

As the main byproduct of cotton production,cottonseed yields edible vegetable oil,ruminant feed,and industrial products.We evaluated the individual and interactive effects of elevated air temperature and soil drought on cottonseed yield and nutritional quality using two cotton cultivars,Sumian 15(heat-susceptible)and PHY370 WR(heat-tolerant).The experiment was conducted under three levels of soil relative water content(SRWC):(75±5)%,(60±5)%and(45±5)%and two temperature regimes:ambient temperature(AT,31.0/26.4℃,mean daytime/night temperature)and elevated temperature(ET,33.4/28.9℃).Cottonseed yield,boll number,seed number,and single-seed weight were lower under combined ET and SRWC(45±5)%than either individual stress or combined stresses in comparison with the control treatment(SRWC(75±5)%under AT).Drought tended to increase oil content and reduce protein content,whereas ET showed almost the opposite effects.Under the combination of ET and soil drought,oil content was still higher than under control,although ET weakened the beneficial effects of drought.For protein,ET offset the negative impacts of mild drought on protein content,but protein content was not increased under SRWC(45±5)%.Each stress or combined stress reduced oil and protein yields under all treatments,owing to declines in cottonseed yields.The combined stress reduced unsaturated fatty acid(UFA)/saturated fatty acid(SFA)and essential amino acid(EAA)/non-essential amino acid(NAA).Compared with PHY370 WR,the sensitivity of Sumian 15 to the combined factors was evidenced in the following ways:(1)seed yield,yield components,oil and protein yields were decreased more for Sumian 15 than PHY370 WR compared with the control treatment;(2)the combined stresses caused lower oil content,UFA,and UFA/SFA in Sumian 15 than PHY370 WR;(3)interaction effects of the combined factors on protein content and EAA/NAA were detected only in Sumian 15.

Production of Biodiesel from Cottonseed Oil over Aminated Flax Fibres Catalyst: Kinetic and Thermodynamic Behaviour and Biodiesel Properties

The transesterification of cottonseed oil in the presence of methanol to fatty acid methyl ester (FAME) using flax-based fibres catalyst modified with an alkaline moiety was studied. The catalyst was prepared by radiation induced grafting (RIG) of glycidyl methacrylate (GMA) onto dignified flax fibres followed by amination with diethylamine (DEA) and treatment with NaOH solution. A maximum FAME conversion of 88.6% was obtained at 60°;C with a catalyst dosage of 2.5 wt%, an oil/methanol ratio of 1:33 and a time of 2 h. The biodiesel quality was verified by nuclear magnetic resonance (1H NMR). Kinetic analysis showed a reaction activation energy of 69.33 kJ·molˉ1 and a rate constant of 0.00349 minˉ1 indicating that the catalytic reaction was kinetically controlled. Thermodynamic analyses revealed that the reaction was reversible, non-spontaneous and endothermic with an enthalpy of 66.62 kJ·molˉ1. The obtained biodiesel showed physical and chemical characteristics complying with ASTM D6751. It can be concluded that the alkaline biopolymer catalyst prepared in the present study is a promising green candidate for biodiesel production.

Research on the Ultrasonic Extraction Technology of Cottonseed Oil

[ Objective ] To optimize the ultrasonic extraction technology of cottonseed oil by response surface methodology. [ Method ] Based on the single factor experiment, the response surface method with three factors at three levels was adopted according to the principle of central composite design, The optimum extraction conditions of extraction duration, liquid-solid ratio and temperature were determined by regression analysis. [ Re- salt] The best ultrasonic extraction conditions of cottonseed oil were 35 min of extraction duration, 38 ℃ of extraction temperature and 56：6 of liquid-solid ratio. Under these conditions, the extraction rate of cottonseed oil could reach up to 45.81%, with a relative error of 0.13% from the theoreti-cal value of 45.94%. [ Conclusion] The method optimized the extraction technology and laid foundation for the further research of cottonseed oil. Key words Cottonseed oil; Ultrasonic extraction; Response surface method; China

Reuse of waste frying oil for production of rhamnolipids using Pseudomonas aeruginosa zju.u1M

In this work,rhamnolipid production was investigated using waste frying oil as the sole carbon source. By culture in shaking flasks,a naturally isolated strain synthesized rhamnolipid at concentration of 12.47 g/L and its mutant after treatment by UV light increased this productivity to 24.61 g/L. Fermentation was also conducted in a 50 L bioreactor and the productivity reached over 20 g/L. Hence,with a stable and high productive mutant strain,it could be feasible to reuse waste frying oil for rhamnolipid production on industrial scale.

Current scenario and potential of biodiesel production from waste cooking oil in Pakistan: An overview

Biodiesel utilization has been rapidly growing worldwide as the prime alternative to petrodiesel due to a global rise in diesel fuel demand along with hazardous emissions during its thermochemical conversion.Although,several debatable issues including feedstock availability and price,fuel and food competition,changes in land use and greenhouse gas emission have been raised by using edible as well as inedible feedstocks for the production of biodiesel.However,non-crop feedstocks could be a promising alternative.In this article,waste cooking oils have been recommended as a suitable option for biodiesel production bearing in mind the current national situation.The important factors such as the quantity of waste cooking oil produced,crude oil and vegetable oil import expenses,high-speed diesel imports,waste management issues and environmental hazards are considered.Moreover,process simulation and operating cost evaluation of an acid catalyzed biodiesel production unit are also conducted.The simulation results show that the production cost of waste cooking oil-based biodiesel is about 0.66 USD·L-1.We believe that the present overview would open new pathways and ideas for the development of biofuels from waste to energy approach in Pakistan.

The Kinetics of the Esterification of Free Fatty Acids in Waste Cook- ing Oil Using Fe2（SO4）3/C Catalyst

The esterification of free fatty acids(FFA) in waste cooking oil with methanol in the presence of Fe2(SO4)3/C(ferric sulfate/active carbon) catalyst was studied.The effects of different temperature,methanol/FFA mole ratio and amount of catalyst on the conversion of FFA were investigated.The results demonstrated that under optimal esterification conditions the final acid value of the resultant system can be reduced to ～1(mg KOH)·g-1,which met fully the requirements in post-treatment for efficient separation of glycerin and biodiesel.The kinetics of the esterification were also investigated under different temperatures.The results indicated that the rate-control step could be attributed to the surface reaction and the esterification processes can be well-depicted by the as-calculated kinetic formula in the range of the experimental conditions.

Diffusion and Regeneration Mechanism of Waste Composite Oils Rejuvenator in Aged Asphalt

The physical performance of recycled asphalt was used as the main evaluation index to study the optimal range of a self-made rejuvenator.Through the penetration,viscosity and gel permeation chromatography(GPC)tests,the diffusion degree of the rejuvenator under different temperatures and time process was analyzed,and the diffusion efficiency of the rejuvenator was evaluated from the macro and micro perspective.The regeneration mechanism of the rejuvenator in the aged asphalt was also analyzed using the Fourier transform infrared spectroscopy(FTIR),scanning electron microscope(SEM)and chemical composition tests.The research results showed that the optimum rejuvenator content was about 3%.Higher temperature and longer time were beneficial to improving the permeability and diffusion of the rejuvenator.During the aging process,the light components were reduced,and more macromolecular asphaltenes were generated as well as a large number of carbonyl and sulfoxide.After diffusion and regeneration,the light components in the asphalt were supplemented,the wrinkles and gullies of the aged asphalt were almost improved to the surface state of the matrix asphalt.

Investigation of performance and emission characteristics of waste cooking oil as biodiesel in a diesel engine

Biodiesel is one of the most popular prospective alternative fuels and can be obtained from a variety of sources. Waste frying oil is one such source along with the various raw vegetable oils. However, some specific technical treatments are required to improve certain fuel properties such as viscosity and calorific value of the biodiesel being obtained from waste cooking oil methyl ester （WCOME）. Various treatments are applied depending on the source and therefore the composition of the cooking oil. This research investigated the performance of WCOME as an alternative biofuel in a four-stroke direct injection diesel engine. An 8-mode test was undertaken with diesel fuel and five WCOME blends. The best compromise blend in terms of performance and emissions was identified. Results showed that energy utilization factors of the blends were similar within the range of the operational parameters （speed, load and WCOME content）. Increasing biodiesel content produced slightly more smoke and NOx for a great majority of test points, while the CO and THC emissions were lower.

Biodiesel Production from Waste Cooking Oil Using Sulfuric Acid and Microwave Irradiation Processes

A comparative study of biodiesel production from waste cooking oil using sulfuric acid (Two-step) and microwave-assisted transesterification (One-step) was carried out. A two-step transesterification process was used to produce biodiesel (alkyl ester) from high free fatty acid (FFA) waste cooking oil. Microwave-assisted catalytic transesterification using BaO and KOH was evaluated for the efficacy of microwave irradiation in biodiesel production from waste cooking oil. On the basis of energy consumptions for waste cooking oil (WCO) transesterification by both conventional heating and microwave-heating methods evaluated in this study, it was estimated that the microwave-heating method consumes less than 10% of the energy to achieve the same yield as the conventional heating method for given experimental conditions. The thermal stability of waste cooking oil and biodiesel was assessed by thermogravimetric analysis (TGA). The analysis of different oil properties, fuel properties and process parametric evaluative studies of waste cooking oil are presented in detail. The fuel properties of biodiesel produced were compared with American Society for Testing and Materials (ASTM) standards for biodiesel and regular diesel.

Adsorption of oil from waste water by coal:characteristics and mechanism

The work described here was focused on exploring the potential application of coal to purification of oily waste water.Coal was added to oily waste water as an adsorbent and then removed through a flotation process.This allowed economical and highly efficient separation of oil from the waste water.The absorption time,coal type,coal particle size distribution,pH value and oil concentration were investigated.The results indicate that oil absorption by a coal increases for a period of 1.5 h and then gradually tends toward an equilibrium value.It appears that the absorption capacity of anthracite is more than that of lean coal or lignite,given the same coal particle size distribution.The absorption capacity of a coarse coal fraction is less than that of finer coal,given the same of coal type.The absorption capacity of anthracite decreases slightly as the pH increases from 4 to 9.The adsorption of oil on anthracite follows the Freundlich isothermal adsorption law:given initial oil concentrations of 160.5 or 1023.6 mg/L the absorption capacity was 23.8 or 840.0 mg/g.The absorption mechanism consists of two kinds of absorption,a physical process assisted by a chemical one.

Biogas Production from Anaerobic Digestion of High Oil Waste

The possibility of anaerobic digestion of high oil waste at high temperatures was explored,and the effects of fat concentration on biogas production via anaerobic digestion were analyzed by batch and continuous experiments successively. Besides,the response and recovery of the digestion system to the shock of high concentrations of oil were studied. The results showed that the anaerobic digestion of high oil waste could be carried out,and fat concentration had a significant effect on the anaerobic digestion. In the batch experiments,the process of anaerobic digestion could carry out only when fat concentration was 0-1. 68%,and the average methane content was 46. 42%; with the increase of fat concentration,both methane content and production rate decreased significantly,and the digestion period was extended obviously. When fat concentration exceeded 2. 52%,the anaerobic digestion failed to start,and methane could not be detected in the produced biogas. In the continuous experiments,the system could withstand a certain concentration of fat( 6 g/L),and anaerobic digestion process would be inhibited when it experienced the impact of a high oil load( 26. 7 g/L). Nevertheless,this process could recover quickly after the removal of the impact,and the system could withstand a higher fat concentration( 13 g/L) than before. Furthermore,the volume production rate of biogas was approximately 1 L/( L·d),and methane content was about 55%.

Solid- liquid phase separation and resource recycling study for waste rolling oily sludge

On the basis of the characteristics of a highly emulsified solid-liquid phase （fine particles, sticky consistency,black color, and low reuse ratio）, waste rolling oily sludge has been a focal problem in the steel industry. In this article, a solid-liquid phase separation and resource recycling process was described, with pilot test results showing that flocculation-sedimentation is an effective pretreatment, and that the filtration-coagulationvacuum distillation process is simple and feasible with a 53.5% recovery rate for regenerated oil that is qualified for return to the roiling production line. Then,solid phase oil-sludge was extracted by solvents with a 77% metal resource recovery rate and a wide utilization range. Finally, according to the experimental results, a set of feasibility plans for a 50 t/a waste rolling oily sludge solid-liquid separation and resource recycle project was designed, with the expectation of 50% regenerated oil yield, 70% solid metal resource recovery, and a 2. 5-year investment payback period.

Effect of ethanol addition on flame characteristics of waste oil biodiesel

Biodiesel is a kind of clean and renewable energy. The effect of ethanol addition on the flame characteristics of waste oil biodiesel is studied by using OH-PLIF technique from the perspective of OH radical evolution. Ethanol addition leads to the appearance of diffusion flame reaction interface ahead of schedule and shortens the diffusion flame height. The experimental results show a linear correlation between the flame height and the fuel flow rate for a given fuel and oxidant. The same conclusion is drawn from the theoretical analysis of the approximate model. In addition. ethanol addition makes the average OH signal intensity of flame at different fuel flow rate tend to be consistent and the fuel flow rate enlarge where the flame field shows the strongest oxidation performance. Average OH signal intensity begins to weaken at larger fuel flow rate, which indicates that fuel flow rate of fuels blended with ethanol can change in larger range and does not significantly affect the uniformity of combustion.