A splashing crown is commonly observed when a high-speed drop impacts a liquid film. The influence of the liquid viscosity on the crown＇s evolution is not yet clear. We review several existing theories of this proble...A splashing crown is commonly observed when a high-speed drop impacts a liquid film. The influence of the liquid viscosity on the crown＇s evolution is not yet clear. We review several existing theories of this problem, and carry out a series of numerical simulations. We find that a three-segment model can describe the crown＇s motion. In the very early stage when the crown is barely visible, the influence of viscosity is small. Later, a shallow water approach used in most existing models is applicable as long as the initial conditions are formulated properly. They depend on viscous dissipation in the intermediate period. Preliminary estimation based on a dissipation function is proposed to characterize the influence of viscosity in this problem.展开更多
A sink vortex is a common physical phenomenon in continuous casting,chemical extraction,water conservancy,and other industrial processes,and often causes damage and loss in production.Therefore,the real-time monitorin...A sink vortex is a common physical phenomenon in continuous casting,chemical extraction,water conservancy,and other industrial processes,and often causes damage and loss in production.Therefore,the real-time monitoring of the sink vortex state is important for improving industrial production efficiency.However,its suction-extraction phenomenon and shock vibration characteristics in the course of its formation are complex mechanical dynamic factors for flow field state monitoring.To address this issue,we set up a multi-physics model using the level set method(LSM)for a free sink vortex to study the two-phase interaction mechanism.Then,a fluid–solid coupling dynamic model was deduced to investigate the shock vibration characteristics and reveal the transition mechanism of the critical flow state.The numerical results show that the coupling energy shock induces a pressure oscillation phenomenon,which appears to be a transient enhancement of vibration at the vortex penetration state.The central part of the transient enhancement signal is a high-frequency signal.Based on the dynamic coupling model,an experimental observation platform was established to verify the accuracy of the numerical results.The water-model experiment results were accordant with the numerical results.The above results provide a reference for fluid state recognition and active vortex control for industrial monitoring systems,such as those in aerospace pipe transport,hydropower generation,and microfluidic devices.展开更多
At the late stage of continuous casting（CC）ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mech...At the late stage of continuous casting（CC）ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mechanical modeling method for ladle teeming was proposed.Firstly,a dynamic model for vortex suction process was built,and the profiles of vortex flow field were acquired.Then,based on the level set method（LSM）,a two-phase 3Dinterface coupling model for slag entrapment was built.Finally,in combination with high-order essentially non-oscillatory（ENO）and total variation diminishing（TVD）methods,a LSM-based numerical solution method was proposed to obtain the 3Dcoupling evolution regularities in vortex suction process.Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity;there is a pressure oscillation phenomenon at the vortex penetration state,which is caused by the energy shock of two-phase vortex penetration coupling.展开更多
Numerical simulations using CLSVOF(coupled level set and volume of fluid)method are performed to investigate the coalescence and splashing regimes when a spherical water drop hits on the water surface with an impingem...Numerical simulations using CLSVOF(coupled level set and volume of fluid)method are performed to investigate the coalescence and splashing regimes when a spherical water drop hits on the water surface with an impingement angle.Impingement angle is the angle between the velocity vector of primary drop and the normal vector to water surface.The effect of impingement angle,impact velocity and the height of target liquid are carried out.The impingement angle is varied from 0o to 90o showing the gradual change in phenomena.The formation of ship pro like shape,liquid sheet,secondary drops and crater are seen.Crater height,crater displacement,crown height and crown angle are calculated and the change in the parameters with change in impingement angle is noted.展开更多
The Large Eddy Simulation （LES） of the wave breaking over a muddy seabed is carried out with a Coupled Level Set and Volume Of Fluid （CLSVOF） method to capture the interfaces.The effects of the mud on the wave bre...The Large Eddy Simulation （LES） of the wave breaking over a muddy seabed is carried out with a Coupled Level Set and Volume Of Fluid （CLSVOF） method to capture the interfaces.The effects of the mud on the wave breaking are studied.The existence of a mud layer beneath an otherwise rigid bottom is found to have a similar effect as an increase of the water depth.As compared with the case of a simple rigid bottom,the inception of the wave breaking is evidently delayed and the breaking intensity is much reduced.The dissipation of the wave energy is shown to have very different rates before,during and after the breaking.Before and after the breaking,the mud plays an important role.During the breaking,however,the turbulence as well as the entrainment of the air also dissipate a large amount of energy.展开更多
文摘研究了耦合Level Set(LS)方法处理介质界面算法,通过对比旋转流场和剪切流场下的界面捕捉情况,给出了各种不同方法在处理介质界面过程中的优缺点,分析了产生这种现象的原因。通过对比分析得到,耦合粒子Level Set(Particle Level Set,PLS)方法以及耦合Level Set和VOF(Coupled Level Set and Volume of Fluid,CLSVOF)方法相比于单纯的LS方法,在流体守恒性质方面有很大的提高,PLS方法可以根据撒播粒子和精确追踪示踪粒子修正LS界面;而CLSVOF方法可以通过重构界面和体积输运,重新初始化LS函数。在实际物理应用中,PLS方法多次重新撒播示踪粒子会降低界面精度,且对每个示踪粒子的追踪需要加大CPU内存,而CLSVOF方法更加高效和合理。
基金Supported by Doctoral Fund of Henan Polytechnic University(Grant No.60707/011)National Natural Science Foundation of China(Grant No.11402266)the Fund of the State Key Laboratory of Disaster Prevention&Mitigation of Explosion & Impact(PLA University of Science and Technology,Grant No.DPMEIKF201401)
基金Project supported by the National Natural Science Foundation of China(Nos.11672310 and 11372326)the National Basic Research Program of China(No.2014CB04680202)
文摘A splashing crown is commonly observed when a high-speed drop impacts a liquid film. The influence of the liquid viscosity on the crown＇s evolution is not yet clear. We review several existing theories of this problem, and carry out a series of numerical simulations. We find that a three-segment model can describe the crown＇s motion. In the very early stage when the crown is barely visible, the influence of viscosity is small. Later, a shallow water approach used in most existing models is applicable as long as the initial conditions are formulated properly. They depend on viscous dissipation in the intermediate period. Preliminary estimation based on a dissipation function is proposed to characterize the influence of viscosity in this problem.
基金supported by the National Natural Science Foundation of China(Nos.52175124 and 52305139)the Zhejiang Provincial Natural Science Foundation of China(No.LZ21E050003)+1 种基金the Fundamental Research Funds for the Zhejiang Provincial Universities(No.RF-C2020004)the Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems(No.GZKF-202125),China.
文摘A sink vortex is a common physical phenomenon in continuous casting,chemical extraction,water conservancy,and other industrial processes,and often causes damage and loss in production.Therefore,the real-time monitoring of the sink vortex state is important for improving industrial production efficiency.However,its suction-extraction phenomenon and shock vibration characteristics in the course of its formation are complex mechanical dynamic factors for flow field state monitoring.To address this issue,we set up a multi-physics model using the level set method(LSM)for a free sink vortex to study the two-phase interaction mechanism.Then,a fluid–solid coupling dynamic model was deduced to investigate the shock vibration characteristics and reveal the transition mechanism of the critical flow state.The numerical results show that the coupling energy shock induces a pressure oscillation phenomenon,which appears to be a transient enhancement of vibration at the vortex penetration state.The central part of the transient enhancement signal is a high-frequency signal.Based on the dynamic coupling model,an experimental observation platform was established to verify the accuracy of the numerical results.The water-model experiment results were accordant with the numerical results.The above results provide a reference for fluid state recognition and active vortex control for industrial monitoring systems,such as those in aerospace pipe transport,hydropower generation,and microfluidic devices.
基金supported by NSFC-Zhejiang Joint Fund for the Integration of Industrialization and Informatization(U1509212)National Natural Science Foundation of China(51375446)Zhejiang Provincial Natural Science Foundation for Distinguished Young Scientists(LR16E050001)
文摘At the late stage of continuous casting（CC）ladle teeming,sink vortex can suck the liquid slag into tundish,and cause negative influences on the cleanliness of molten steel.To address this issue,a twophase fluid mechanical modeling method for ladle teeming was proposed.Firstly,a dynamic model for vortex suction process was built,and the profiles of vortex flow field were acquired.Then,based on the level set method（LSM）,a two-phase 3Dinterface coupling model for slag entrapment was built.Finally,in combination with high-order essentially non-oscillatory（ENO）and total variation diminishing（TVD）methods,a LSM-based numerical solution method was proposed to obtain the 3Dcoupling evolution regularities in vortex suction process.Numerical results show that the vortex with higher kinetic energy can form an expanded sandglass-shape region with larger slag fraction and lower rotating velocity;there is a pressure oscillation phenomenon at the vortex penetration state,which is caused by the energy shock of two-phase vortex penetration coupling.
文摘Numerical simulations using CLSVOF(coupled level set and volume of fluid)method are performed to investigate the coalescence and splashing regimes when a spherical water drop hits on the water surface with an impingement angle.Impingement angle is the angle between the velocity vector of primary drop and the normal vector to water surface.The effect of impingement angle,impact velocity and the height of target liquid are carried out.The impingement angle is varied from 0o to 90o showing the gradual change in phenomena.The formation of ship pro like shape,liquid sheet,secondary drops and crater are seen.Crater height,crater displacement,crown height and crown angle are calculated and the change in the parameters with change in impingement angle is noted.
基金Project supported by the National Natural Science Foundation of China (Grant No.51109119)the State key Laboratory of Hydro-science and Engineering,Tsinghua University (Grant No.2011-KY-1)
文摘The Large Eddy Simulation （LES） of the wave breaking over a muddy seabed is carried out with a Coupled Level Set and Volume Of Fluid （CLSVOF） method to capture the interfaces.The effects of the mud on the wave breaking are studied.The existence of a mud layer beneath an otherwise rigid bottom is found to have a similar effect as an increase of the water depth.As compared with the case of a simple rigid bottom,the inception of the wave breaking is evidently delayed and the breaking intensity is much reduced.The dissipation of the wave energy is shown to have very different rates before,during and after the breaking.Before and after the breaking,the mud plays an important role.During the breaking,however,the turbulence as well as the entrainment of the air also dissipate a large amount of energy.
