期刊文献+
共找到1,204篇文章
< 1 2 61 >
每页显示 20 50 100
导流管参数对真空紧耦合气雾化法制备Fe-Cr合金粉末的影响
1
作者 苏才津 孙耀宁 +3 位作者 董开基 尹燕 张瑞华 姜立恒 《粉末冶金技术》 CAS CSCD 北大核心 2024年第1期68-74,共7页
采用真空紧耦合气雾化法制备Fe–Cr合金粉末,研究了导流管直径与导流管伸出长度对Fe–Cr合金粉末粒度分布、收得率、中位粒径(D_(50))的影响。结果表明,在其他工艺参数不变的情况下,当导流管直径从4.5 mm增大到6.0 mm时,Fe–Cr合金粉末... 采用真空紧耦合气雾化法制备Fe–Cr合金粉末,研究了导流管直径与导流管伸出长度对Fe–Cr合金粉末粒度分布、收得率、中位粒径(D_(50))的影响。结果表明,在其他工艺参数不变的情况下,当导流管直径从4.5 mm增大到6.0 mm时,Fe–Cr合金粉末累积粒度分布曲线右移,中位粒径增大,细粉收得率减小,粉末流动性减小,松装密度减小;当导流管伸出长度由2.0 mm增加到2.5 mm时,Fe–Cr合金粉末累积粒度分布曲线左移,中位粒径减小,细粉收得率增加,粉末流动性增加,松装密度升高。综上所述,雾化压力3.8 MPa,过热度250℃,导流管直径4.5 mm,导流管伸出长度2.5 mm,制备得到的Fe–Cr合金粉末综合性能最优。 展开更多
关键词 真空紧耦合气雾化法 Fe–cr金属粉末 导流管 粉末性能
下载PDF
功能化石墨烯复合吸附剂对Cr(Ⅵ)的吸附性能
2
作者 刘小静 李俊燕 +2 位作者 党泽静 祖丹怡 吴代文 《化工科技》 CAS 2024年第2期22-27,共6页
以氧化石墨烯(GO)、聚乙烯醇(PVA)为原料,3-缩水甘油醚氧基丙基三甲氧基硅烷(GLYMO)为桥接剂,采用原位水热法制备氧化石墨烯/聚乙烯醇(GPGO)复合吸附剂。借助红外、扫描电镜等表征GPGO的结构,通过静态吸附实验探索m(GLYMO)、pH值、吸附... 以氧化石墨烯(GO)、聚乙烯醇(PVA)为原料,3-缩水甘油醚氧基丙基三甲氧基硅烷(GLYMO)为桥接剂,采用原位水热法制备氧化石墨烯/聚乙烯醇(GPGO)复合吸附剂。借助红外、扫描电镜等表征GPGO的结构,通过静态吸附实验探索m(GLYMO)、pH值、吸附时间、Cr(Ⅵ)初始质量浓度、共存阴离子对GPGO吸附Cr(Ⅵ)性能的影响。结果表明,GLYMO的桥接作用和强酸环境可极大地促进GPGO对Cr(Ⅵ)的吸附。二级动力学和Langmuir等温吸附模型能够很好地描述GPGO对Cr(Ⅵ)的吸附过程,由Langmuir模型计算出GPGO吸附剂对Cr(Ⅵ)的最大吸附量为384.6 mg/g。Cl^(-)和NO^(-)_(3)的存在对GPGO吸附Cr(Ⅵ)性能影响不大,但SO^(2-)_(4)对该吸附过程产生较强的抑制作用。 展开更多
关键词 石墨烯 聚乙烯醇 偶联 cr(Ⅵ) 吸附
下载PDF
CHF患者CRP/Alb、PDGF、BUN/Cr水平变化及对预后的评估价值
3
作者 宋鑫 先本婧 刘峥嵘 《河北医药》 CAS 2024年第1期34-38,共5页
目的 探讨慢性心力衰竭(CHF)患者C-反应蛋白与白蛋白比值(CRP/Alb)、血小板源性生长因子(PDGF)联合血尿素氮与肌酐比值(BUN/Cr)水平变化,并分析各指标预测心血管死亡和全因死亡的效能。方法 选取2020年1月至2022年3月收治的109例CHF患者... 目的 探讨慢性心力衰竭(CHF)患者C-反应蛋白与白蛋白比值(CRP/Alb)、血小板源性生长因子(PDGF)联合血尿素氮与肌酐比值(BUN/Cr)水平变化,并分析各指标预测心血管死亡和全因死亡的效能。方法 选取2020年1月至2022年3月收治的109例CHF患者,根据1年内心血管死亡和全因死亡情况分为死亡组(26例)和存活组(83例)。比较2组社会人口学资料和临床特征[美国纽约心脏病学会心功能分级(NYHA)、左心室射血分数、左心室舒张末期内径、左心室收缩末期内径、N-末端脑钠肽前体(NT-proBNP)、临床用药]、CRP/Alb、PDGF、BUN/Cr水平,分析CRP/Alb、PDGF、BUN/Cr水平的相关性,采用Cox回归分析CHF患者心血管死亡和全因死亡的相关影响因素,采用受试者工作特征曲线(ROC)分析预测价值,采用卡普兰-迈耶曲线(K-M)生存曲线分析不同CRP/Alb、PDGF、BUN/Cr水平患者的生存率。结果 死亡组NYHA心功能分级、左心室舒张末期内径、左心室收缩末期内径、NT-proBNP高于存活组,左心室射血分数低于存活组(P<0.05);死亡组CRP/Alb、PDGF、BUN/Cr高于存活组(P<0.05);CHF患者CRP/Alb与PDGF、BUN/Cr呈正相关,PDGF与BUN/Cr呈正相关(P<0.05);在校正了NYHA心功能分级等混杂因素后,CRP/Alb、PDGF、BUN/Cr仍是CHF患者心血管死亡和全因死亡的相关影响因素(P<0.05);CRP/Alb、PDGF、BUN/Cr预测心血管死亡和全因死亡的ROC下面积(AUC)分别为0.712、0.801、0.738,三者联合时的AUC为0.911(P<0.05);CRP/Alb、PDGF、BUN/Cr高水平患者生存率低于低水平患者(P<0.05)。结论 CRP/Alb、PDGF、BUN/Cr与CHF患者心血管死亡和全因死亡有关,联合检测可作为预测患者病情转归的一个方案,为临床评估预后、治疗等提供参考依据。 展开更多
关键词 crP/Alb PDGF BUN/cr 慢性心力衰竭 心血管死亡 全因死亡
下载PDF
化学还原-生物刺激对高质量比Cr(Ⅵ)污染土壤治理及稳定化
4
作者 吴卿 莫文君 +3 位作者 刘洁琼 彭森 李倩男 万芮含 《安全与环境学报》 CAS CSCD 北大核心 2023年第9期3346-3354,共9页
为提高Cr(Ⅵ)污染土壤治理后的稳定性,采用化学还原剂联合乙酸钠生物刺激对高质量比Cr(Ⅵ)污染土壤进行治理和稳定化。通过测定Cr(Ⅵ)质量比、Cr形态及含量并结合XRD分析,同时对生物刺激过程中Cr(Ⅵ)污染土壤的细菌多样性变化进行监测,... 为提高Cr(Ⅵ)污染土壤治理后的稳定性,采用化学还原剂联合乙酸钠生物刺激对高质量比Cr(Ⅵ)污染土壤进行治理和稳定化。通过测定Cr(Ⅵ)质量比、Cr形态及含量并结合XRD分析,同时对生物刺激过程中Cr(Ⅵ)污染土壤的细菌多样性变化进行监测,对比多硫化钙(Calcium polysulfide,CPS)、硫酸亚铁(FeSO4)、零价铁3种化学还原剂以及乙酸钠用量对高质量比Cr(Ⅵ)污染土壤的治理能力及稳定化效果。结果表明:质量分数为10%的FeSO4与质量比为7 g/kg的乙酸钠联用,在生物刺激50 d时对高质量比Cr(Ⅵ)的去除及稳定化效果最佳,还原率为93.58%,且能够将毒性较大的生物有效态铬全部转化为其他稳定形态的铬。XRD结果表明,两种方法联用后土壤中Cr主要以Cr(Ⅲ)的形式存在。生物刺激过程中土壤细菌群落物种分布变化明显,生物刺激50 d时,富集的细菌类群最多。 展开更多
关键词 环境工程学 高质量比cr(Ⅵ)污染土壤 化学还原 生物刺激 细菌多样性
下载PDF
Coupling Effects of Depletion Interactions in Three-Sphere Systems with Different Size Ratio of Large- to Small-Sphere
5
作者 Zhouan Zhou Dai Gang Changming Xiao 《Journal of Modern Physics》 2013年第6期761-765,共5页
The coupling effects of depletion interactions in three-sphere systems with different size ratio of large- to small-sphere are studied by Monte Carlosimulations in this paper. The numerical results show that this coup... The coupling effects of depletion interactions in three-sphere systems with different size ratio of large- to small-sphere are studied by Monte Carlosimulations in this paper. The numerical results show that this coupling effect is affected by the size ratio of large- to small-sphere: the larger the size ratio is, the larger the coupling effect will be. 展开更多
关键词 coupling Effects of Depletion INTERACTIONS Three-Sphere SYSTEMS SIZE ratio
下载PDF
基于长裂纹扩展阈值的渗碳Cr-Ni合金钢超高周疲劳极限评估
6
作者 杨溥 刘兵 +3 位作者 邓海龙 陈雨 孔建行 于欢 《制造技术与机床》 北大核心 2023年第10期98-103,共6页
文章旨在构建渗碳Cr-Ni合金钢的超高周疲劳极限预测模型。在两种应力比下对渗碳Cr-Ni合金钢开展超高周疲劳试验,结果表明,渗碳Cr-Ni合金钢的S-N特性呈现持续下降的趋势。通过扫描电镜对断口表面裂纹形貌的观测,当疲劳寿命低于5×10^... 文章旨在构建渗碳Cr-Ni合金钢的超高周疲劳极限预测模型。在两种应力比下对渗碳Cr-Ni合金钢开展超高周疲劳试验,结果表明,渗碳Cr-Ni合金钢的S-N特性呈现持续下降的趋势。通过扫描电镜对断口表面裂纹形貌的观测,当疲劳寿命低于5×10^(5)周次时,表面失效是疲劳试样主要失效形式,当寿命高于1×10^(6)周次时,内部夹杂-FGA-鱼眼诱发失效成为渗碳Cr-Ni合金钢的主要失效方式。利用裂纹扩展阈值对FGA尺寸进行了评估,结合El-Haddad模型,构建了基于长裂纹扩展应力强度因子阈值的疲劳极限预测模型。与他人模型预测的疲劳极限对比,得出构建的阈值应力模型预测的疲劳极限误差最小,预测结果更保守。 展开更多
关键词 渗碳cr-Ni合金钢 变应力比 S-N曲线 应力强度因子 疲劳极限预测
下载PDF
Efficient Method to Extract Coupling Ratio and Round-trip Loss Parameters of Optical Waveguide Ring Resonator
7
作者 HAN Xiu-you PANG Fu-fei +1 位作者 FANG Zu-jie ZHAO Ming-shan 《Semiconductor Photonics and Technology》 CAS 2008年第3期158-161,173,共5页
Based on the measurement of the contrast ratios of the transmission spectra from the throughput and drop ports of ring resonator, an efficient method is proposed to extract the coupling ratio and round-trip loss of th... Based on the measurement of the contrast ratios of the transmission spectra from the throughput and drop ports of ring resonator, an efficient method is proposed to extract the coupling ratio and round-trip loss of the integrated optical waveguide ring resonator. The parameters of a racetrack resonator prepared by ion-exchange technique in K9 optical glass substrate are examined, which demonstrates the validity of this method. The accuracy and applicable range of this method are also discussed. 展开更多
关键词 集成光学元件 波导管 参数设置 比率
下载PDF
Applications of Compliance to Cost Ratio (C-CR) Analysis in the Determination of Optimum Mix of Insulating Bricks in Masonry
8
作者 Davies Oladayo Folorunso Abayomi Adewale Akinwande 《Journal of Minerals and Materials Characterization and Engineering》 2021年第2期134-147,共14页
The scarcity of housing increases as population continues to rise all over the world. Despite government efforts at providing houses, yearly demand keeps on exceeding available houses and hence the hike in rent, the c... The scarcity of housing increases as population continues to rise all over the world. Despite government efforts at providing houses, yearly demand keeps on exceeding available houses and hence the hike in rent, the cost of erecting houses and the cost of building materials. This ultimately calls for a decisive solution. This study therefore applied compliance to cost ratio (C-CR) analysis in evaluating the optimum properties of fired ceramic bricks. The optimum mix proportions of waste glass (WG) and wood saw dust (WSD) in fired bricks, that will be suitable for housing constructions were hence determined. Fired clay brick samples which contained varied proportions of WG and WSD were examined for physical, mechanical and thermal properties in line with standard procedures. The results were compared with existing standards and property evaluation index, compliance level and C-CR were applied in analyzing the results obtained. It was observed that with increasing WG content, compliance level increased. Also, cost ratio and experimental cost of each brick sample trended upward. Sample with mix proportion;20 wt% WG, 5 wt% WSD and 75 wt% clay had compliance level of 94% and C-CR index of 7.81, hence chosen as optimum mix proportion for masonry bricks. 展开更多
关键词 Properties Evaluation HOUSING Fired Clay Bricks Compliance to Cost ratio (C-cr) and Masonry
下载PDF
Preliminary Study of CAS-LIBB Single-Particle MicrobeamⅡEndstation:Ⅱ.Considerations for Choosing the Right CCD Camera
9
作者 胡智文 许永建 余增亮 《Plasma Science and Technology》 SCIE EI CAS CSCD 2006年第4期497-501,共5页
The proposed multi-dimensional quantitative fluorescence microscopy for the CASLIBB single-particle microbeam II endstation is a CCD-based imaging system. We systematically analyse the theoretical and the practical co... The proposed multi-dimensional quantitative fluorescence microscopy for the CASLIBB single-particle microbeam II endstation is a CCD-based imaging system. We systematically analyse the theoretical and the practical considerations pertinent to choosing the right CCD camera and unveiling the principles underlying multifarious parameters. Therefore, this analysis can be a valuable tool in scrutinizing each parameter and clarifying proper usage of a scientific CCD camera. 展开更多
关键词 single-particle microbeam quantitative fluorescence microscopy Charge-Coupled Device (CCD) camera signal-to-noise ratio
下载PDF
Mg/Ca,Ba/Ca,and S/Ca ratios as environmental and growth proxies for bivalve shells from the Haima cold seep,South China Sea
10
作者 Jingya CAO Shengxiong YANG +2 位作者 Danling TANG Junxi FENG Jinqiang LIANG 《Journal of Oceanology and Limnology》 SCIE CAS CSCD 2023年第2期660-672,共13页
Bivalve shell fossils,cemented by authigenic carbonates,are widely spread in the Haima cold seep,Qiongdongnan Basin of the South China Sea(SCS).In this study,we examined an element profile of Gigantidas platifrons in ... Bivalve shell fossils,cemented by authigenic carbonates,are widely spread in the Haima cold seep,Qiongdongnan Basin of the South China Sea(SCS).In this study,we examined an element profile of Gigantidas platifrons in the Haima cold seeps at a water depth of 1381 m.Based on the scanning electron microscope(SEM)analyses,the prismatic layer and nacreous layer were identified,which are characterized by prismatic structure and stratified structure,respectively.In addition,the profile can be subdivided into two parts:altered and unaltered zones.Laser inductively coupled plasma mass spectrometry(LA-ICP-MS)mapping shows that the element concentrations of the altered zones were influenced by the authigenic carbonate rocks,whereas the element concentrations of unaltered zones remain stable.In-situ X-ray diffraction(XRD)analyses show that the mineral constituent of the prismatic layer is mainly composed of aragonite.Along with the growth profile,Mg/Ca ratios of unaltered zones have minor variations,ranging 0.72-0.97 mmol/mol(mean=0.87 mmol/mol),with estimated temperatures of 3.8-4.1℃,indicating that the temperature of the surrounding seawater remains constant and agree with the measured data of 3.9℃which was conducted by a conductivity-temperature-depth system(CTD).The minor variations of Ba/Ca ratios(0.01-0.06 mmol/mol;mean=0.04 mmol/mol)indicate a relatively stabilized salinity of the surrounding seawater.S/Ca ratios show large variations of 0.04-4.15 mmol/mol(mean=1.37 mmol/mol).S/Ca ratios have regular variations which generally correspond to the variations of the Mg/Ca ratios,highlighting that the S/Ca ratios of bivalve shells show the potential to reflect the growth rate of the Gigantides.However,further studies should be carried out on the understanding of the links between the S/Ca ratios and seepage intensity of cold-seep fluids. 展开更多
关键词 Mg/Ca Ba/Ca and S/Ca ratios laser inductively coupled plasma mass spectrometry(LA-ICPMS) Gigantidas platifrons Haima cold seep South China Sea
下载PDF
Unity Formulas for the Coupling Constants and the Dimensionless Physical Constants
11
作者 Stergios Pellis 《Journal of High Energy Physics, Gravitation and Cosmology》 CAS 2023年第1期245-294,共50页
In this paper in an elegant way will be presented the unity formulas for the coupling constants and the dimensionless physical constants. We reached the conclusion of the simple unification of the fundamental interact... In this paper in an elegant way will be presented the unity formulas for the coupling constants and the dimensionless physical constants. We reached the conclusion of the simple unification of the fundamental interactions. We will find the formulas for the Gravitational constant. It will be presented that the gravitational fine-structure constant is a simple analogy between atomic physics and cosmology. We will find the expression that connects the gravitational fine-structure constant with the four coupling constants. Perhaps the gravitational fine-structure constant is the coupling constant for the fifth force. Also will be presented the simple unification of atomic physics and cosmology. We will find the formulas for the cosmological constant and we will propose a possible solution for the cosmological parameters. Perhaps the shape of the universe is Poincare dodecahedral space. This article will be followed by the energy wave theory and the fractal space-time theory. 展开更多
关键词 Fine-Structure Constant Proton To Electron Mass ratio Dimensionless Physical Constants coupling Constant Gravitational Constant Avogadro’s Number Fundamental Interactions Gravitational Fine-Structure Constant Cosmological Constant
下载PDF
Critical Cyclic Stress Ratio of Undisturbed Saturated Soft Clay in the Yangtze Estuary under Complex Stress Conditions
12
作者 刘功勋 栾茂田 +2 位作者 唐小微 王忠涛 郭莹 《Transactions of Tianjin University》 EI CAS 2010年第4期295-303,共9页
There exists a critical cyclic stress ratio when sand or clay is subjected to cyclic loading. It is an index dis-tinguishing stable state or failure state. The soil static and dynamic universal triaxial and torsional ... There exists a critical cyclic stress ratio when sand or clay is subjected to cyclic loading. It is an index dis-tinguishing stable state or failure state. The soil static and dynamic universal triaxial and torsional shear apparatus de-veloped by Dalian University of Technology in China was employed to perform different types of tests on saturated soft marine clay in the Yangtze estuary. Undisturbed samples were subjected to undrained cyclic vertical and torsional coupling shear and cyclic torsional shear after three-directional anisotropic consolidation with different initial consoli-dation parameters. The effects of initial orientation angle of major principal stress, initial ratio of deviatoric stress,initial coefficient of intermediate principal stress and stress mode of cyclic shear on the critical cyclic stress ratio wereinvestigated. It is found that the critical cyclic stress ratio decreases significantly with increasing initial orientation angle of major principal stress and initial ratio of deviatoric stress. Compared with the effects of the initial orientationangle of major principal stress and initial ratio of deviatoric stress, the effect of initial coefficient of intermediate prin-cipal stress is less evident. Under the same consolidation condition, the critical cyclic stress ratio from the cyclic cou-pling shear test is lower than that from the cyclic torsional shear test, indicating that the stress mode of cyclic shear has an obvious effect on the critical cyclic stress ratio. The main reason is that the continuous rotation in principal stressdirections during cyclic coupling shear damages the original structure of soil more than the cyclic torsional shear does. 展开更多
关键词 应力条件 临界循环 长江口 土应力 饱和
下载PDF
基于RCC-M规范要求的CR技术等价性分析
13
作者 张亮 谭素平 +1 位作者 臧功志 付凯中 《集成电路应用》 2023年第2期61-63,共3页
阐述RCC-M规范要求,分析了胶片照相技术中图像质量对比度、不清晰度和颗粒度的要求,等价得出数字射线技术图像质量的技术要求。通过典型厚度平板试块和自然缺陷管道试块的透照试验,验证CR技术与胶片照相技术的图像质量差异性,得出在一... 阐述RCC-M规范要求,分析了胶片照相技术中图像质量对比度、不清晰度和颗粒度的要求,等价得出数字射线技术图像质量的技术要求。通过典型厚度平板试块和自然缺陷管道试块的透照试验,验证CR技术与胶片照相技术的图像质量差异性,得出在一定透照厚度范围内CR技术能够与胶片照相技术达到相同的检测能力。 展开更多
关键词 RCC-M规范 cr技术 信噪比 图像不清晰度
下载PDF
黄铁矿基MFC-CW耦合系统反硝化动力学研究
14
作者 张倩倩 鲁汭 +3 位作者 安恒 卢欣怡 吴振斌 肖恩荣 《水生生物学报》 CAS CSCD 北大核心 2024年第7期1214-1224,共11页
研究比较了黄铁矿基双阳极MFC-CW在不同碳氮比(0和2.5)及初始硝酸盐浓度(7、14和28 mg/L)条件下上阳极和下阳极的反硝化速率,以及对不同阶段硝酸盐还原反应动力学的模拟,从动力学角度揭示系统自养-异养协同反硝化机理。结果显示:不同碳... 研究比较了黄铁矿基双阳极MFC-CW在不同碳氮比(0和2.5)及初始硝酸盐浓度(7、14和28 mg/L)条件下上阳极和下阳极的反硝化速率,以及对不同阶段硝酸盐还原反应动力学的模拟,从动力学角度揭示系统自养-异养协同反硝化机理。结果显示:不同碳氮比下系统两阳极硝酸盐还原效果差异不大,而亚硝酸盐累积、硫酸盐生成的差别较大,两阳极处微生物群落组成相似,优势菌属的相对丰度受C/N、阳极位置影响较大;两阳极处的硝酸盐还原动力学均属于一级反应,且C/N=0时反硝化速率常数(0.0087、0.0045和0.0188/h)均小于C/N=2.5(0.0151、0.0071和0.0798/h;以上阳极为例);MFC-CW系统的反硝化动力学更符合Monod-CSTR模型,且在停留时间较长时取得更好的拟合效果,随着停留时间的增加,C/N=0时系统的反硝速率增加,C/N=2.5时系统的反硝化速率在一定范围内波动[0.6662—0.7744 g/(m^(2)·d)]。实验结果可为黄铁矿基MFC-CW的实际工程应用提供理论指导。 展开更多
关键词 黄铁矿 低碳氮比污水 微生物燃料电池耦合人工湿地 反硝化动力学 混养反硝化
下载PDF
非纯弯作用下I形波板组合梁的弹性屈曲应力
15
作者 杨淑雁 王天宇 +1 位作者 查支祥 王韬 《重庆交通大学学报(自然科学版)》 CAS CSCD 北大核心 2024年第4期1-6,共6页
纯弯条件下,带钢翼缘板的波形钢腹板I形组合梁(简称I形波板梁)的屈曲应力已有明确的计算公式,但该公式不适用于非纯弯的条件。笔者对自由端受集中荷载的悬臂式I形波板梁进行了数值模拟研究,结果表明:该种梁有3种屈曲模态,分别是翼缘板... 纯弯条件下,带钢翼缘板的波形钢腹板I形组合梁(简称I形波板梁)的屈曲应力已有明确的计算公式,但该公式不适用于非纯弯的条件。笔者对自由端受集中荷载的悬臂式I形波板梁进行了数值模拟研究,结果表明:该种梁有3种屈曲模态,分别是翼缘板屈曲、波板屈曲和耦合屈曲;当梁的屈曲由翼缘板屈曲主导时,悬臂式非纯弯梁的屈曲应力大于纯弯梁的屈曲应力,此时翼缘板的宽长比为影响翼缘板屈曲应力的主要因子;结合大量的数值模拟结果,笔者对翼缘板屈曲系数进行了修正,提出了涵盖全部屈曲模式的I形波板梁屈曲应力计算公式。 展开更多
关键词 桥梁工程 I形波板梁 翼缘板屈曲 腹板屈曲 耦合屈曲 宽长比
下载PDF
酸分馏效应对GasBench-IRMS测定碳酸盐碳、氧同位素的影响
16
作者 王楠 赵彦彦 田有荣 《质谱学报》 EI CAS CSCD 北大核心 2024年第3期401-411,I0004,共12页
本文利用在线制样装置(GasBench)和稳定同位素比质谱仪(IRMS)测试一系列碳酸盐标准物质和现代海洋浮游有孔虫样品,在不同测试条件下,分析不同性状碳酸盐矿物的氧同位素分馏程度,计算氧同位素酸分馏系数,探讨酸分馏效应对不同碳酸盐矿物... 本文利用在线制样装置(GasBench)和稳定同位素比质谱仪(IRMS)测试一系列碳酸盐标准物质和现代海洋浮游有孔虫样品,在不同测试条件下,分析不同性状碳酸盐矿物的氧同位素分馏程度,计算氧同位素酸分馏系数,探讨酸分馏效应对不同碳酸盐矿物氧同位素测定的影响机制和控制因素,以及对氧同位素测试值(δ^(18)O_(m))的校正方法。结果表明,酸分馏效应对氧同位素值的影响主要是由于生成的CO_(2)气体与顶空瓶中气态水(高温时主要影响)或酸中游离态自由水(低温时主要影响)之间发生氧同位素交换引起的。不同性状碳酸盐标准物质的氧同位素酸分馏系数具有显著差异,且与氧同位素组成相关。δ^(18)O_(m)值发生偏移的程度与反应温度、样品量、磷酸含水量以及酸中游离态和气态水的氧同位素组成与样品氧同位素组成之间的差异等因素有关。氧同位素酸分馏效应与信号强度具有显著相关性。建议精确称量相同质量的标准物质和样品,遵循信号强度匹配的原则,并采用多种标准物质线性校正的方法有效校正氧同位素分馏现象。在较低的反应温度(25℃)下,氧同位素分馏程度较轻微,δ^(18)O分析精度更高,优于0.05‰。本方法为精确测定碳酸盐中碳、氧同位素组成提供了参考,可有效提高相关的测试精度。 展开更多
关键词 在线制样装置-稳定同位素比质谱仪(GasBench-IRMS) 磷酸法 碳酸盐 氧同位素 酸分馏效应
下载PDF
混合联肢PEC墙结构简化力学分析模型及承载力计算 被引量:1
17
作者 周巧玲 赵仕兴 +2 位作者 苏明周 石韵 周婷 《天津大学学报(自然科学与工程技术版)》 EI CAS CSCD 北大核心 2024年第2期186-200,共15页
为克服钢筋混凝土墙肢底部易发生脆性破坏的缺点,提高联肢剪力墙结构的抗震性能,采用PEC剪力墙肢代替混合联肢剪力墙结构中的钢筋混凝土剪力墙肢,形成新型混合联肢PEC墙结构.通过改变钢连梁截面尺寸、PEC墙肢宽厚比以及楼层数形成3个系... 为克服钢筋混凝土墙肢底部易发生脆性破坏的缺点,提高联肢剪力墙结构的抗震性能,采用PEC剪力墙肢代替混合联肢剪力墙结构中的钢筋混凝土剪力墙肢,形成新型混合联肢PEC墙结构.通过改变钢连梁截面尺寸、PEC墙肢宽厚比以及楼层数形成3个系列共8个模型,研究了弹性耦连比和改变弹性耦连比的方式对混合联肢PEC墙结构滞回性能和应力分布的影响.结果表明:各个系列模型滞回曲线均饱满而稳定,未出现明显捏缩现象,证明混合联肢PEC墙结构抗震性能好、耗能能力强,适用于高烈度抗震设防地区;与已有联肢墙结构研究成果一致,弹性耦连比是影响混合联肢PEC墙结构整体性能的主要因素,并不会因为实现方式不同而影响结构应力分布规律;为保证结构达极限承载能力状态时各层钢连梁均发生剪切屈服并充分发展塑性,同时避免受拉侧墙肢发生延性较差的小偏心受拉破坏,应控制弹性耦连比小于等于70%;基于有限元模型分析结果,探讨了混合联肢PEC墙结构受力机理,建立了结构简化力学分析模型,给出了极限承载力计算公式;试验及有限元模型分析结果与理论计算结果误差在15%以内,且均为理论值偏低,证明本文提出的混合联肢PEC墙结构极限承载力计算公式精度较高且偏于安全,可用于计算结构极限承载力. 展开更多
关键词 PEC剪力墙 钢连梁 弹性耦连比 简化力学分析模型 极限承载力
下载PDF
中坝遗址地层的Cr/Cu值对干湿环境的指示意义 被引量:9
18
作者 李中轩 朱诚 +3 位作者 朱青 马春梅 张广胜 欧阳杰 《地理科学》 CSCD 北大核心 2008年第6期799-803,共5页
将中坝遗址5 ka以来连续沉积地层按文化序列分为12层,分别测量Rb、Sr和Cr、Cu含量,对比显示,Cr/Cu比值与Rb/Sr比值明显正相关。Cr与Rb的属性相似,Cr化学活性低,易于在粉砂质沉积物中富集;而Cu和Sr在成壤过程中容易迁移,在粘土质沉积层... 将中坝遗址5 ka以来连续沉积地层按文化序列分为12层,分别测量Rb、Sr和Cr、Cu含量,对比显示,Cr/Cu比值与Rb/Sr比值明显正相关。Cr与Rb的属性相似,Cr化学活性低,易于在粉砂质沉积物中富集;而Cu和Sr在成壤过程中容易迁移,在粘土质沉积层中含量较高。通过对Cr、Cu元素在表生环境下的化学性质、沉积地层的属性、微地貌特征、与泥炭腐殖化度古里雅冰芯氧同位素曲线等指标对比表明,Cr/Cu比值变化对环境干湿变化的指示具有普遍意义。 展开更多
关键词 中坝遗址 cr/Cu值 Rb/Sr值
下载PDF
Cr-Cu/SiO_2 催化剂上顺酐和1,4-丁二醇的耦合反应 被引量:9
19
作者 沈伟 潘超 +1 位作者 杨新艳 徐华龙 《化学学报》 SCIE CAS CSCD 北大核心 2008年第11期1287-1292,共6页
研究了Cr-Cu/SiO2催化剂上顺酐加氢反应和1,4-丁二醇脱氢反应耦合制备重要的精细化学品γ-丁内酯.耦合反应显著提高了顺酐转化率和γ-丁内酯选择性.Cr修饰提高了催化剂的脱氢活性,抑止了催化剂的过度加氢活性,使1,4-丁二醇的转化率和γ... 研究了Cr-Cu/SiO2催化剂上顺酐加氢反应和1,4-丁二醇脱氢反应耦合制备重要的精细化学品γ-丁内酯.耦合反应显著提高了顺酐转化率和γ-丁内酯选择性.Cr修饰提高了催化剂的脱氢活性,抑止了催化剂的过度加氢活性,使1,4-丁二醇的转化率和γ-丁内酯选择性显著提高.Cr修饰量为w=5%的Cr-Cu/SiO2催化剂上耦合反应的原料转化率为100%,γ-丁内酯选择性达98.8%.XRD,XPS等研究表明,Cr修饰促进了催化剂上铜元素的分散,氧化铬对氧化铜有给电子作用,Cr修饰的Cr-Cu/SiO2催化剂还原后比Cu/SiO2具有更多的Cu+,这有利于催化剂脱氢活性和γ-丁内酯选择性的提高. 展开更多
关键词 顺丁烯二酸酐 1 4-丁二醇 Γ-丁内酯 耦合反应 cr-Cu/SiO2
下载PDF
高温均质化对高碳Cr合金钢锭组织和元素分布的影响 被引量:9
20
作者 彭坤 金曼 +2 位作者 张洪奎 杨弋涛 邵光杰 《上海金属》 CAS 2010年第1期15-18,共4页
采用光学显微镜、扫描电镜及能谱仪分析了含铬合金钢锭铸态及均质化后的显微组织和元素偏析规律,旨在确定钢锭的高温均质化工艺。研究结果表明,经过1160℃、1210℃和1260℃分别进行6h和12h的均质化处理后,含铬合金钢锭的元素偏析得到不... 采用光学显微镜、扫描电镜及能谱仪分析了含铬合金钢锭铸态及均质化后的显微组织和元素偏析规律,旨在确定钢锭的高温均质化工艺。研究结果表明,经过1160℃、1210℃和1260℃分别进行6h和12h的均质化处理后,含铬合金钢锭的元素偏析得到不同程度的改善,1260℃保温12h的均质化处理效果最为理想,而1210℃保温6h的均质化最为经济实用。 展开更多
关键词 高碳cr合金钢 高温均质化 偏析比
下载PDF
上一页 1 2 61 下一页 到第
使用帮助 返回顶部