An Analytical Method to Detect the Coupling Damage Relationship of Concrete Subjected to Bending Fatigue and Temperature Actions

Based on the assumptions validated by the experiments,an analytical method to detect the coupling actions of bending fatigue and temperature on concrete was proposed.To this purpose,a coefficient denoted by f D （T）with the strain distributions caused by these two actions was defined.In terms of the known parameters and the fitted functions of strain,the explicit expression for f D （T）which develops in the way same as the law of temperature change in the body of specimens was obtained.Our experimental results indicate that the weigh fraction of temperature stress decreases in the coupling damage field with the fading temperature gradient,and consequently disclose the mutual influence between these two types of actions in the loading history.

Development of a RBFNN prediction model for carrot quality based on meteorological temperatures at vegetable stations

To evaluate and predict the quality of carrots during logistics process in North China under extreme temperature conditions,quality indicator changes of carrots were investigated,and temperature-coupled quality prediction models were developed.Seven temperatures were selected from meteorological temperature data by cluster analysis to simulate the changes in extreme temperatures during the short-term transportation of carrots.No carrots rotted during the 48h storage period.Under both isothermal and nonisothermal conditions,weight loss andΔE increased while the firmness and sensory evaluation(SE)decreased.The RBFNN performed better than the Arrhenius model in predicting weight loss andΔE,with R^(2)>0.97,MSE<0.009 and relative errors within±18%.The results of the predictive confidence level and standardized residual indicated the good performance of the RBFNN model.The temperature-coupled prediction models of RBFNN were promising candidates for predicting the quality of vegetable products and therefore reducing economic loss of vegetable industry.

Combined effects of temperature and axial pressure on dynamic mechanical properties of granite

In order to get the dynamic mechanical properties of deep rock mass suffered both high temperature and high pressure,impact loading experiments on granite subjected to temperature and axial pressure were carried out. Furthermore, the internalstructure characteristics of granite under different temperatures were observed by scanning electron microscopy (SEM). The results show that the longitudinal wave velocity assumes a downward trend which shows a rapid drop before falling slowly as the temperature increases. The uniaxial compressive strength of the specimen decreases significantly at temperatures of 25?100 °C compared to that at temperatures of 100?300 °C. The peak strain rises rapidly before the dividing point of 100 °C, but increases slowly after the dividing point. The internal structure of the rock changes substantially as the temperature increases, such as the extension and transfixion of primary and newborn cracks. In addition, the thermal damage under axial pressure is greater than that described by the longitudinal wave velocity and the phenomenon shows obviously when the temperature increases.

Temperature influence on macro-mechanics parameter of intact coal sample containing original gas from Baijiao Coal Mine in China

Investigation of temperature effect on mechanical parameters of coal is very important for understanding the mechanical response of coal bed at high temperature.It is especially benefcial for mitigating the thermal-induced disasters occurred in those coal mines suffering from heat hazard.In this work,coal samples,obtained from the No.2442 working face of Baijiao Coal Mine,were subjected to uniaxial compression ranging from 20 to 40℃ with an interval of 5℃.The apparatus used was designed to obtain deformation of a stressed sample,as well as the emission of gases desorbing from coal matrix.The adsorbed gas desorption caused by heating is measured during the entire testing.It is evident that the concentrations of releasing gas(containing methane,carbon dioxide and ethane)slightly rise with increasing temperature.Gas movement observed is closely related to the deformation of coal sample.Both uniaxial compressive strength and elastic modulus of coal samples tend to reduce with temperature.It reveals that increasing temperature can not only result in thermal expansion of coal,but also lead to desorption of preexisting gas in coal which can in turns harden coal due to shrinks of the coal matrix.Even though desorption of adsorbed gas can contribute to the hardening effect for the heated coal,by comparison to the results,it could be inferred that the softening of coal resulted from thermal expansion still predominates changes in mechanical characters of coal sample with temperature at the range from20 to 40℃.

Interface bond degradation and damage characteristics of full-length grouted rock bolt in tunnels with high temperature

Full-length grouted bolts play a crucial role in geotechnical engineering thanks to their excellent stability.However,few studies have been concerned with the degrading performance of grouted rock bolts caused by extensive and continuous heat conduction from surrounding rocks in high-geothermal tunnels buried more than 100 m(temperature from 28C to 100C).To investigate the damage mechanism,we examined the time-varying behaviors of grouted rock bolts in both constant and variable temperature curing environments and their damage due to the coupling effects of high temperature and humidity through mechanical and micro-feature tests,including uniaxial compression test,pull-out test,computed tomography(CT)scans,X-ray diffraction(XRD)test,thermogravimetric analysis(TGA),etc.,and further analyzed the relationship between grout properties and anchorage capability.In order to facilitate a rapid assessment and control of the anchorage performance of anchors in different conditions,results of the interface bond degradation tests were correlated to environment parameters based on the damage model of interfacial bond stress proposed.Accordingly,a thermal hazard classification criterion for anchorage design in high-geothermal tunnels was suggested.Based on the reported results,although high temperature accelerated the early-stage hydration reaction of grouting materials,it affected the distribution and quantity of hydration products by inhibiting hydration degree,thus causing mechanical damage to the anchorage system.There was a significant positive correlation between the strength of the grouting material and the anchoring force.Influenced by the changes in grout properties,three failure patterns of rock bolts typically existed.Applying a hot-wet curing regime results in less reduction in anchorage force compared to the hot-dry curing conditions.The findings of this study would contribute to the design and investigations of grouted rock bolts in high-geothermal tunnels.

Numerical Investigation on the Flow and Temperature Fields in an Inductively Coupled Plasma Reactor

This paper gives a numerical study on the flow and temperature fields in an induced plasma reactor, which worked in 0.5 ATM with air as a working gas. We employed a two-dimensional mode of an inductively coupled plasma to calculate the temperature and flow field of the reactor as well as the generator. The algorithm is based on the solutions of the two-dimensional continuity, momentum, and energy equations in term of vorticity, stream function and enthalpy. An upwind finite-difference scheme was adopted to solve those equations with appropriate boundary conditions. The computed results show that there is a flat region with little parameter change in the reactor, that the diameter of the region is not much larger than that of the generator and that a deep change of parameter exists in the outer side of the region.

Weak coupling between heterotrophic nanoflagellates and bacteria in the Yellow Sea Cold Water Mass area

A study was carried out to investigate the grazing pressure of heterotrophic nanoflagellates （HNF） on bac-teria assemblages in the Yellow Sea Cold Water Mass （YSCWM） area in October, 2006. The results show that the HNF abundance ranges from 303 to 1388 mL-1, with a mean of 884 mL-1. The HNF biomass is equivalent to 10.6%-115.6% of that of the bacteria. The maximum abundance of the HNF generally occurred in the upper 30 m water layer, with a vertical distribution pattern of surface layer abundance greater than middle layer abundance, then bottom layer abundance. The hydrological data show that the YSCWM is located in the northeastern part of the study area, typically 40 m beneath the surface. A weak correlation is found be- tween the abundances of HNF and bacteria in both the YSCWM and its above water layer. One-way ANOVA analysis reveals that the abundance of HNF and bacteria differs between inside the YSCWM and in the above water mass. The ingestion rates of the HNF on bacteria was 8.02±3.43 h-1 in average. The grazing rate only represented 22.75%±6.91% of bacterial biomass or 6.55%±4.24% of bacterial production, implying that the HNF razinR was not the major factor contributing to the bacterial loss in the YSCWM areas.

NUMERICAL SIMULATION OF MOLTEN POOL AND CONTROL STRATEGY OF KISS POINT IN A TWIN-ROLL STRIP CASTING PROCESS

Coupled turbulent flow, temperature fields of the twin-roll casting strip process were simulated by three-dimensional finite element method. Based on the heat balance calculation and using inverse methods between the simulations and real experiments, the relational models among casting speed, location, and coefficient of heat transfer between molten metal and rolls in different regions are given. In the simulation, the calculated surface temperatures are in good agreement with the measured values. An on-line model of kiss point is derived by simulations and the geometry of molten pool, corresponding control strategy is also proposed.

Verification of an operational ocean circulation-surface wave coupled forecasting system for the China＇s seas

An operational ocean circulation-surface wave coupled forecasting system for the seas off China and adjacent areas（OCFS-C） is developed based on parallelized circulation and wave models. It has been in operation since November 1, 2007. In this paper we comprehensively present the simulation and verification of the system, whose distinguishing feature is that the wave-induced mixing is coupled in the circulation model. In particular, with nested technique the resolution in the China＇s seas has been updated to（1/24）° from the global model with（1/2）°resolution. Besides, daily remote sensing sea surface temperature（SST） data have been assimilated into the model to generate a hot restart field for OCFS-C. Moreover, inter-comparisons between forecasting and independent observational data are performed to evaluate the effectiveness of OCFS-C in upper-ocean quantities predictions, including SST, mixed layer depth（MLD） and subsurface temperature. Except in conventional statistical metrics, non-dimensional skill scores（SS） is also used to evaluate forecast skill. Observations from buoys and Argo profiles are used for lead time and real time validations, which give a large SS value（more than 0.90）. Besides, prediction skill for the seasonal variation of SST is confirmed. Comparisons of subsurface temperatures with Argo profiles data indicate that OCFS-C has low skill in predicting subsurface temperatures between 100 m and 150 m. Nevertheless, inter-comparisons of MLD reveal that the MLD from model is shallower than that from Argo profiles by about 12 m, i.e., OCFS-C is successful and steady in MLD predictions. Validation of 1-d, 2-d and 3-d forecasting SST shows that our operational ocean circulation-surface wave coupled forecasting model has reasonable accuracy in the upper ocean.

Multidecadal Trends in Large-Scale Annual Mean SATa Based on CMIP5 Historical Simulations and Future Projections

Based on observations and Coupled Model lntercomparison Project Phase 5 （CMIP5） results, multidecadal variations and trends in annual mean surface air temperature anomalies （SATa） at global, hemispheric, and hemispheric land and ocean scales in the past and under the future scenarios of two representative concentration pathways （RCPs） are analyzed. Fifteen models are selected based on their performances in capturing the temporal variability, long-term trend, multidecadal variations, and trends in global annual mean SATa. Observational data analysis shows that the multidecadal variations in annual mean SATa of the land and ocean in the northern hemisphere （NH） and of the ocean in the southern hemisphere （SH） are similar to those of the global mean, showing an increase during the 1900-1944 and 1971-2000 periods, and flattening or even cooling during the 1945-1970 and 2001-2013 periods. These observed characteristics are basically reproduced by the models. However, SATa over SH land show an increase during the 1945-1970 period, which differs from the other hemispheric scales, and this feature is not captured well by the models. For the recent hiatus period （2001-2013）, the projected trends of BCC-CSM1-1-m, CMCC-CM, GFDL-ESM2M, and NorESM1-ME at the global and hemispheric scales are closest to the observations based on RCP4.5 and RCP8.5 scenarios, suggesting that these four models have better projection capability in SATa. Because these four models are better at simulating and projecting the multidecadal trends of SATa, they are selected to analyze future SATa variations at the global and hemispheric scales during the 2006-2099 period. The selected multi-model ensemble （MME） projected trends in annual mean SATa for the globe, NH, and SH under RCP4.5 （RCP8.5） are 0.17 （0.29） ℃, 0.22 （0.36） ℃, and 0.11 （0.23） ℃-decade-1 in the 21st century, respectively. These values are significantly lower than the projections of CMIP5 MME without model selection.

Analysis of thermal-mechanical coupled characteristics of vehicle twin-tube shock absorber

A comprehensive model that included mechanical dynamics of the shock absorber coupled with its thermal properties was proposed innovatively.Moreover a thermal-mechanical coupled model which reflected the closed-loop positive feedback system was established by using MATLAB/SIMULINK,and some curves of shock absorber temperature rising characteristic were obtained by simulation ＆computation under several operating modes and different parameters conditions.Research results show that：shock absorber design parameters,external excitations,and thermo-physical properties parameter,such as oil density have effect on the shock absorber temperature rising characteristic.However other thermo-physical properties parameters,such as oil specific heat,cylinder density,cylinder specific heat,and cylinder thermal conductivity,have no effect on it.The results may be used for studying reliability design of the shock absorber.

Exchange Interactions at the Interface FMIAFM Nanocomposite Obtained by Mechanochemical Synthesis

This paper presents a study of the relationship between the magnetic properties and microstructure of nanocomposite Ni/MnO, Ni/CoO, Co/MnO, Co/CoO. The objective is to understand how the coupling interface FM/AFM （ferromagnetic/anti-ferromagnetic） manifests itself in magnetic response of these materials to an applied field. Sample preparation was performed using mechanochemical synthesis by means of a ball mill planetary type high power at normal atmosphere. The characterization was done by XRD （X-ray diffraction）, SEM （scanning electron microscopy） and VSM （vibrating sample magnetometry）. Analyzing the XRD peaks of the samples studied, there was a decrease in the average particle diameter with increasing milling time, which is important in the magnetic interactions of the atoms of the surface. In addition, the diffraction pattern showed formation of new phases by oxidation interfering with the magnetic measurements. Analyses by SEM show chipboard multiform nano- and micrometer-sized grains on the surface of the clusters being responsible for the interaction. The magnetic measurements show a strong coupling between the phases present in nanocomposites showing once again that the MS （mechanosynthesis） is a powerful technique for this kind of purpose. The effect of the decrease in crystallite size leads to large variations of magnetic properties of the material which have been specifically observed changes in HC （coercive field） in the RM （remanent magnetization） and SM （saturation magnetization）. The decrease in crystallite size in the course of grinding intensifies the effects that depend on the surface-to-volume ratio of the material. M vs. T measures were taken for different values of applied field and found a jump in the moment of the sample near the N6el temperature of the antiferromagnetic.

The effect of discharge conditions of ICP etching reactor on plasma parameters

This study investigated the inductively coupled plasma etching reactor and RF coils developed by North Microelectronic Corporation. Full three dimensional simulations were made at different discharge conditions. The simulations examined and compared the distribution and non-uniformity of several plasma parameters at a fixed position upon the wafer at different pressures and coil currents. These parameters included electron density, electron temperature and power deposition. The results demonstrate that the electron density, power deposition and uniformity increase with either higher pressure or stronger coil currents, while the electron temperature decreases at this condition. Coil number increase can reduce the non-uniformity of parameters in the spatial distribution. The linear relationship between power deposition and electron density does not always exist. The comparison between simulation results and experiment results is also presented in the paper.

ON 3.5-YEAR COUPLED OSCILLATION BETWEEN NORTHERN OSCILLATION AND SEA SURFACE TEMPERATURE OF THE EQUATORIAL PACIFIC

In this paper, we have analyzed the processes of temporal and spatial development in the interaction be- tween the Northern Oscillation and the sea surface temperature of the cquatorial Pacific. It is revealed that between them there is a closed negative feedback process and the whole period including their influence, feedback and adjustment to each other is about 3.5 years. Furthermore, we have discussed the physical processes responsible for various links between the Northern Oscillation and the sea surface temperature of the equatorial Pacific. A physical model on 3.5-year coupled oscillation caused by the air-sea interaction in the tropical Pacific is postulated.

LED supplementary strategy based on hourly light integral for improving the yield and quality of greenhouse strawberries

Supplemental lighting is critical to the growth of greenhouse crops under the environmental conditions of low temperatures combined with weak radiation during the winter and spring seasons.To achieve the essential daily light integral(DLI)for greenhouse crop growth,a supplemental light strategy was proposed based on hourly light integral(HLI).The target HLI was calculated by dividing the target DLI by the duration of light exposure,while the actual HLI was obtained by accumulating the Photosynthetic Photon Flux Density(PPFD)based on real-time monitoring.Subsequently,the supplemental lighting duration for the next hour was determined by the difference between the target HLI and the actual HLI from all previous periods.Furthermore,the supplementary lighting strategy incorporated maximum values for both PPFD and temperature,and the supplemental light was withheld whenever the actual PPFD or temperature exceeded these values.An experiment was conducted on strawberries in a commercial greenhouse,targeting a DLI of 12.6 mol/(m2∙d),with no supplemental lighting as the control.The results indicated that LED supplemental lighting based on HLI increased the DLI to approximately10 mol/(m2∙d)and raised the strawberry canopy temperature by 1°C-2°C.Compared to the control treatment,the LED supplemental lighting based on HLI significantly improved the net photosynthetic rate,stem thickness,number of leaves,leaf length,and leaf width of the strawberry plants.Additionally,the fruit yield per plant,soluble solids content,and sugar-acid ratio in the supplemental lighting treatment increased by 32%,21%,and 33%,respectively.Thus,LED supplemental lighting based on HLI is an effective strategy for improving the yield and quality of greenhouse crop production.