In this paper, the effect of electric boundary conditions on Mode I crack propagation in ferroelectric ceramics is studied by using both linear and nonlinear piezoelectric fracture mechanics. In linear analysis, imper...In this paper, the effect of electric boundary conditions on Mode I crack propagation in ferroelectric ceramics is studied by using both linear and nonlinear piezoelectric fracture mechanics. In linear analysis, impermeable cracks under open circuit and short circuit are analyzed using the Stroh formalism and a rescaling method. It is shown that the energy release rate in short circuit is larger than that in open circuit. In nonlinear analysis, permeable crack conditions are used and the nonlinear effect of domain switching near a crack tip is considered using an energy-based switching criterion proposed by Hwang et al.（Acta Metal. Mater.,1995）. In open circuit, a large depolarization field induced by domain switching makes switching much more diffcult than that in short circuit. Analysis shows that the energy release rate in short circuit is still larger than that in open circuit, and is also larger than the linear result. Consequently,whether using linear or nonlinear fracture analysis, a crack is found easier to propagate in short circuit than in open circuit, which is consistent with the experimental observations of Kounga Njiwa et al.（Eng. Fract. Mech., 2006）.展开更多
The near crack line field analysis method has been used io investigate into theexact elastic-plastic solutions of a mode II crack under plane stress condilion in anelastic-perfectly plastic solid. The assumptions of t...The near crack line field analysis method has been used io investigate into theexact elastic-plastic solutions of a mode II crack under plane stress condilion in anelastic-perfectly plastic solid. The assumptions of the usual small scale yielding theory.hare been completely. dbandoned and the correct formulations of matching conditionsat the elaslic-plastic boundary. have been given. By, matching the general solution ofthe plastic slress field (bul not the special solution used to be adopted) with the exactelastic stress field (but not the crack tip K-dominant field) at the elastic-plasticboundary, near the crack line, the plastic stresses. the length of the plastic =one and theunit normal vector of the elastic-plastic boundary.which are sufficiently precise near the crack line region ,have been given.展开更多
The near crack line field analysis method has been used to investigate into the exact elastic-plastic solutions of a mode Ⅱ crack under plane stress condition in anelastic-perfectly plastic solid. The assumptions of ...The near crack line field analysis method has been used to investigate into the exact elastic-plastic solutions of a mode Ⅱ crack under plane stress condition in anelastic-perfectly plastic solid. The assumptions of the usual small scale yielding theoryhave been completely. dbandoned and the correct .formulations of matching conditionsat the elastic-plastic boundary have been given. By matching the general solution of the plastic stress field (but not the special solution used to be adopted) will the exactelastic stress field (but not the crack tip K-dominant field) at the elastic-plasticboundary. near the crack line, the plastic .stresses, the length of the plastic zone and theunit normal vector of the elaslic-plastic boundary. which sufficiently precise nearthe crack line region, hare been given.展开更多
Fracture analysis of a semi-permeable Yoffe-type interfacial crack propagating subsonically in magneto-electro-elastic （MEE） composites is presented based on the strip electro- magnetic polarization saturation （SE...Fracture analysis of a semi-permeable Yoffe-type interfacial crack propagating subsonically in magneto-electro-elastic （MEE） composites is presented based on the strip electro- magnetic polarization saturation （SEMPS） model. The electro-magnetic fields inside the crack are considered under the semi-permeable boundary condition. Nonlinear effects near the interfacial crack tip are represented by different electro-magnetic saturation zones. Utilizing the extended Stroh＇s method, we derive the moving dislocation densities as well as intensity factor and energy release rate for Yoffe-type MEE interracial crack. Numerical re- sults through an iterative approach are presented to show the characteristics of fracturedominant parameters with respect to propagation velocity and boundary condition category. The fracture-dominant parameters under the semi-permeable boundary condition are lower than those under the impermeable one, which implies that the electro-magnetic fields in the crack gap can retard the propagation of MEE interfacial crack.展开更多
基金supported by the National Natural Science Foundation of China(11002002 and 11090331)
文摘In this paper, the effect of electric boundary conditions on Mode I crack propagation in ferroelectric ceramics is studied by using both linear and nonlinear piezoelectric fracture mechanics. In linear analysis, impermeable cracks under open circuit and short circuit are analyzed using the Stroh formalism and a rescaling method. It is shown that the energy release rate in short circuit is larger than that in open circuit. In nonlinear analysis, permeable crack conditions are used and the nonlinear effect of domain switching near a crack tip is considered using an energy-based switching criterion proposed by Hwang et al.（Acta Metal. Mater.,1995）. In open circuit, a large depolarization field induced by domain switching makes switching much more diffcult than that in short circuit. Analysis shows that the energy release rate in short circuit is still larger than that in open circuit, and is also larger than the linear result. Consequently,whether using linear or nonlinear fracture analysis, a crack is found easier to propagate in short circuit than in open circuit, which is consistent with the experimental observations of Kounga Njiwa et al.（Eng. Fract. Mech., 2006）.
文摘The near crack line field analysis method has been used io investigate into theexact elastic-plastic solutions of a mode II crack under plane stress condilion in anelastic-perfectly plastic solid. The assumptions of the usual small scale yielding theory.hare been completely. dbandoned and the correct formulations of matching conditionsat the elaslic-plastic boundary. have been given. By, matching the general solution ofthe plastic slress field (bul not the special solution used to be adopted) with the exactelastic stress field (but not the crack tip K-dominant field) at the elastic-plasticboundary, near the crack line, the plastic stresses. the length of the plastic =one and theunit normal vector of the elastic-plastic boundary.which are sufficiently precise near the crack line region ,have been given.
文摘The near crack line field analysis method has been used to investigate into the exact elastic-plastic solutions of a mode Ⅱ crack under plane stress condition in anelastic-perfectly plastic solid. The assumptions of the usual small scale yielding theoryhave been completely. dbandoned and the correct .formulations of matching conditionsat the elastic-plastic boundary have been given. By matching the general solution of the plastic stress field (but not the special solution used to be adopted) will the exactelastic stress field (but not the crack tip K-dominant field) at the elastic-plasticboundary. near the crack line, the plastic .stresses, the length of the plastic zone and theunit normal vector of the elaslic-plastic boundary. which sufficiently precise nearthe crack line region, hare been given.
基金sponsored by the National Science Foundation of China (Nos.11090334 and 11572227)
文摘Fracture analysis of a semi-permeable Yoffe-type interfacial crack propagating subsonically in magneto-electro-elastic （MEE） composites is presented based on the strip electro- magnetic polarization saturation （SEMPS） model. The electro-magnetic fields inside the crack are considered under the semi-permeable boundary condition. Nonlinear effects near the interfacial crack tip are represented by different electro-magnetic saturation zones. Utilizing the extended Stroh＇s method, we derive the moving dislocation densities as well as intensity factor and energy release rate for Yoffe-type MEE interracial crack. Numerical re- sults through an iterative approach are presented to show the characteristics of fracturedominant parameters with respect to propagation velocity and boundary condition category. The fracture-dominant parameters under the semi-permeable boundary condition are lower than those under the impermeable one, which implies that the electro-magnetic fields in the crack gap can retard the propagation of MEE interfacial crack.
