The formation strength plateau of ceramics is addressed. A set of of 99A1203 are conducted, mechanism of the residual subjected to thermal shock thermal shock experiments where the thin specimens of 1 mm× 10 mm&...The formation strength plateau of ceramics is addressed. A set of of 99A1203 are conducted, mechanism of the residual subjected to thermal shock thermal shock experiments where the thin specimens of 1 mm× 10 mm×50 mm exhibit parallel through edge cracks, and thus permit quantitative measurements of the crack patterns. The cracks evolve with the severity of ther- mal shock. It is found that there is a correlation between the length and density of the thermal shock cracks. The increase of crack length weakens the residual strength, whereas the increase of crack density improves it. In a considerably wide temperature range, the two contrary effects just counteract each other; consequently a plateau appears in the variation curve of the residual strength. A comparison between the numerical and experimental results of the residual strength is made, and they are found in good agreement. This work is helpful to a deep understanding of the thermal shock failure of ceramics.展开更多
为分析高地温水工隧洞衬砌结构温度应力特性,基于拉普拉斯变换推导出衬砌结构瞬态温度场的解析解,并借助弹性抗力法推导出衬砌结构的弹性温度应力分量。依托新疆布伦口水电站监测数据对衬砌结构瞬态温度场及应力场进行计算分析,并采用...为分析高地温水工隧洞衬砌结构温度应力特性,基于拉普拉斯变换推导出衬砌结构瞬态温度场的解析解,并借助弹性抗力法推导出衬砌结构的弹性温度应力分量。依托新疆布伦口水电站监测数据对衬砌结构瞬态温度场及应力场进行计算分析,并采用抗拉强度准则和裂缝尖端强度因子对衬砌结构破坏进行分析,提出合理的温控防裂措施。结果表明:1)衬砌温度场前期整体温度迅速上升,在第7天左右达到最大值,其中衬砌内壁温度可达到37℃,外壁温度可达到56℃。2)衬砌结构外墙环向应力可达到2.2 MPa,体现为拉应力状态;径向应力可达到2.7 MPa,呈现为压应力状态。3)衬砌结构强度的破坏主要受温度及结构本身稳定性2方面影响,可通过采用低热水泥、控制混凝土的入模温度以及严格监控施工过程来提高衬砌的稳定性。其中,采用低热水泥可降低衬砌结构的温升值,混凝土的最终水化热每降低50 k J/kg,衬砌结构内外壁的温差可降低1.85℃左右;适当提高入模温度可缩短水化热的放热周期及降低衬砌内外壁温差。展开更多
Three-way pipes, T and Y pipes, are very important connecting components in pipeline systems, their strength are related to the safety of pipelines. In the case that crack is not detected in the three-way pipe, ANSYS ...Three-way pipes, T and Y pipes, are very important connecting components in pipeline systems, their strength are related to the safety of pipelines. In the case that crack is not detected in the three-way pipe, ANSYS finite element program version 5.6 is applied to study the stress distribution of the three-way pipe and to obtain the optimum fillet radius in the crotch region of the two pipes. The reasonable intersection angle of the two pipes is also obtained. In the case that a surface crack is detected in the three-way pipe, the maximum stress intensity factor (SIF) near the front of the surface crack is studied.展开更多
德惠断陷致密气藏储集层埋藏深、纵向跨度大、孔喉连通性差,高密度完井体积压裂技术虽实现了效益开发,但存在不同井间压后产能效果差异性大,稳产时间短的难题。通过对已施工井优质储集层厚度、铺砂强度、裂缝复杂程度和水锁伤害等因素...德惠断陷致密气藏储集层埋藏深、纵向跨度大、孔喉连通性差,高密度完井体积压裂技术虽实现了效益开发,但存在不同井间压后产能效果差异性大,稳产时间短的难题。通过对已施工井优质储集层厚度、铺砂强度、裂缝复杂程度和水锁伤害等因素与产能关系的分析,明确影响单井产能的主控因素,形成差异性射孔+“三段式”先成缝后成网+多级暂堵转向、防水锁压裂液体系等一系列压裂技术对策。经现场DS80-2井试验,压后第二天见气,见气返排率3.8%,日产气8.5×104 m 3,无阻流量19.2×104 m 3,为同区块同厚度气藏产量最高,见气返排率最低井;较设计产能提产20%,降本19%,达到提产控投的目的,为实现致密气藏高效勘探、效益开发提供了技术支撑。展开更多
基金supported by the National Natural Science Foundations of China (10972020,11061130550)Fundamental Research Funds for the Central UniversitiesNational Agency for Research of France (International project T-shock)
文摘The formation strength plateau of ceramics is addressed. A set of of 99A1203 are conducted, mechanism of the residual subjected to thermal shock thermal shock experiments where the thin specimens of 1 mm× 10 mm×50 mm exhibit parallel through edge cracks, and thus permit quantitative measurements of the crack patterns. The cracks evolve with the severity of ther- mal shock. It is found that there is a correlation between the length and density of the thermal shock cracks. The increase of crack length weakens the residual strength, whereas the increase of crack density improves it. In a considerably wide temperature range, the two contrary effects just counteract each other; consequently a plateau appears in the variation curve of the residual strength. A comparison between the numerical and experimental results of the residual strength is made, and they are found in good agreement. This work is helpful to a deep understanding of the thermal shock failure of ceramics.
文摘为分析高地温水工隧洞衬砌结构温度应力特性,基于拉普拉斯变换推导出衬砌结构瞬态温度场的解析解,并借助弹性抗力法推导出衬砌结构的弹性温度应力分量。依托新疆布伦口水电站监测数据对衬砌结构瞬态温度场及应力场进行计算分析,并采用抗拉强度准则和裂缝尖端强度因子对衬砌结构破坏进行分析,提出合理的温控防裂措施。结果表明:1)衬砌温度场前期整体温度迅速上升,在第7天左右达到最大值,其中衬砌内壁温度可达到37℃,外壁温度可达到56℃。2)衬砌结构外墙环向应力可达到2.2 MPa,体现为拉应力状态;径向应力可达到2.7 MPa,呈现为压应力状态。3)衬砌结构强度的破坏主要受温度及结构本身稳定性2方面影响,可通过采用低热水泥、控制混凝土的入模温度以及严格监控施工过程来提高衬砌的稳定性。其中,采用低热水泥可降低衬砌结构的温升值,混凝土的最终水化热每降低50 k J/kg,衬砌结构内外壁的温差可降低1.85℃左右;适当提高入模温度可缩短水化热的放热周期及降低衬砌内外壁温差。
文摘Three-way pipes, T and Y pipes, are very important connecting components in pipeline systems, their strength are related to the safety of pipelines. In the case that crack is not detected in the three-way pipe, ANSYS finite element program version 5.6 is applied to study the stress distribution of the three-way pipe and to obtain the optimum fillet radius in the crotch region of the two pipes. The reasonable intersection angle of the two pipes is also obtained. In the case that a surface crack is detected in the three-way pipe, the maximum stress intensity factor (SIF) near the front of the surface crack is studied.
文摘德惠断陷致密气藏储集层埋藏深、纵向跨度大、孔喉连通性差,高密度完井体积压裂技术虽实现了效益开发,但存在不同井间压后产能效果差异性大,稳产时间短的难题。通过对已施工井优质储集层厚度、铺砂强度、裂缝复杂程度和水锁伤害等因素与产能关系的分析,明确影响单井产能的主控因素,形成差异性射孔+“三段式”先成缝后成网+多级暂堵转向、防水锁压裂液体系等一系列压裂技术对策。经现场DS80-2井试验,压后第二天见气,见气返排率3.8%,日产气8.5×104 m 3,无阻流量19.2×104 m 3,为同区块同厚度气藏产量最高,见气返排率最低井;较设计产能提产20%,降本19%,达到提产控投的目的,为实现致密气藏高效勘探、效益开发提供了技术支撑。
