Effect of rod-like grain on properties and toughening mechanism of 3Y-TZP/Al_2O_3 ceramics

In-situ rod-like Al2O3 grain was prepared by adding CAS multiphase additives under the sintering condition of 30 MPa, 1 550℃and 1 h.The sintering behaviors,microstructure,toughening mechanism and access of Al2O3 ceramics were investigated by SEM,EDS and WDW omnipotent electronic mechanical testing machine,etc,and the crack propagating model of cylindrical crystal/3Y-TZP composite toughening Al2O3 ceramics was established.The results show that the composite additives prompt the anisotropic growth of Al2O3 grain,which strengthens toughening effect of 3Y-TZP in 3Y-TZP/Al2O3 composite ceramics.Moreover, the experimental material density is near to theoretical density,bending strength is 556.35 MPa,and fracture toughness is 6.73 MPa·m1 /2.The mechanical properties of the materials are obviously improved.

Mechanical characteristic and failure mechanism of joint with composite sucker rod

Composite sucker rods are widely used in oil fields because of light weight,high strength,and corrosion resistance.Bonded technology becomes the primary connection method of composites.However,the joints with composite sucker rods are prone to debone and fracture.The connected characteristics are less considered,so the failure mechanism of the joint is still unclear.Based on the cohesive zone model(CZM)and the Johnson-Cook constitutive model,a novel full-scale numerical model of the joint with composite sucker rod was established,and verified by pull-out experiments.The mechanical properties and slip characteristics of the joint were studied,and the damaged procession of the joint was explored.The results showed that:a)the numerical model was in good agreement with the experimental results,and the error is within 5%;b)the von Mises stress,shear stress,and interface stress distributed symmetrically along the circumferential path increased gradually from the fixed end to the loading end;c)the first-bonded interface near the loading end was damaged at first,followed by debonding of the second-bonded interface,leading to the complete shear fracture of the epoxy,and resulted in the debonding of the joint with composite sucker rod,which can provide a theoretical basis for the structural design and optimization of the joint.

Effect of Cerium on Mechanical Performance and Electrical Conductivity of Aluminum Rod for Electrical Purpose

The effect of rare earth element Ce on mechanical performance and electrical conductivity of aluminum rod for electrical purpose were studied under industrial production condition. Using optical microscope, SEM, TEM, EDS and X-ray diffractometer, the microstructure and phase composition of aluminum rod were measured and analyzed. The results indicate that the content of rare earth element Ce is between 0.05% -0.16% in the aluminum rod for electrical purpose. Its tensile strength is enhanced to some extent. The research also discovers that the tensile strength is enhanced remarkably with impurity element Si content increases. Because influence of Si is big to the conductivity, the Si content should be controlled continuously strictly in the aluminum for electrical purpose. Adding rare earth element Ce reduces the solid solubility of Si in the aluminum matrix, and the negative effect of Si on the aluminum conductor reduces effectively. So the limit of in Si content in aluminum rod for electrical purpose can be relaxed moderately.

Modeling and analysis of nonlinear mechanics of a super-thin elastic rod

Nonlinear mechanics for a super-thin elastic rod with the biological background of DNA super-coiling macromolecules is an interdisciplinary research area of classical mechanics and molecular biology. It is also a subject of dynamics and elasticity because elastic bodies are analyzed via the theory of dynamics. It is in frontiers of general mechanics （dynamics and control）. This dissertation is devoted to model a constrained super-thin elastic rod and analyze its stability in equilibrium. The existing research results are summarized. Analytical mechanics is systematically applied to model the elastic rod. The Schroedinger equation for complex curvatures or complex bending moments is, respectively, extended from the case of circular crosssections to that of non-circular ones. The equilibrium of a rod constrained on a surface is investigated.

A general solution for one dimensional chemo-mechanical coupled hydrogel rod

Smart hydrogels are environmentally sensitive hydrogels, which can produce a sensitive response to external stimuli, and often exhibit the characteristics of multi filed coupling. In this paper, a hydrogel rod under chemomechanical coupling was analytically studied based on a poroelastical model. The already known constitutive and governing equations were simplified into the one dimensional case, then two different boundary conditions were considered. The expressions of concentration, displacement,chemical potential and stress related to time were obtained in a series form. Examples illustrate the interaction mechanism of chemical and mechanical effect. It was found that there was a balance state in the diffusion of concentration and the diffusion process could lead to the expansion or the stress change of the hydrogel rod.

Noether symmetry and conserved quantities of the analytical dynamics of a Cosserat thin elastic rod

In this paper, we investigate the Noether symmetry and Noether conservation law of elastic rod dynamics with two independent variables： time t and arc coordinate s. Starting from the Lagrange equations of Cosserat rod dynamics, the criterion of Noether symmetry with Lagrange style for rod dynamics is given and the Noether conserved quantity is obtained. Not only are the conservations of generalized moment and generalized energy obtained, but also some other integrals.

Microstructure and properties of rheo-HPDC Al-8Si alloy prepared by air-cooled stirring rod process

A new and effective semisolid slurry preparation process with air-cooled stirring rod(ACSR)is reported,in which the compressed air is constantly injected into the inner cavity of a stirring rod to cool the melt.The slurry of a newly developed high thermal conductivity Al?8Si alloy was prepared,and thin-wall heat dissipation shells were produced by the ACSR process combined with a HPDC machine.The effects of the air flow on the morphology ofα1-Al particles,mechanical properties and thermal conductivity of rheo-HPDC samples were studied.The results show that the excellent slurry of the alloy could be obtained with the air flow exceeding3L/s.Rheo-HPDC samples that were produced with the air flow of5L/s had the maximum UTS,YS,elongation,hardness and thermal conductivity of261MPa,124MPa,4.9%,HV99and153W/(m·K),respectively.Rheo-HPDC samples show improved properties compared to those formed by HPDC,and the increasing rates of UTS,YS,elongation,hardness and thermal conductivity were20%,15%,88%,13%and10%,respectively.

Investigation on the penetration of jacketed rods with striking velocities of 0.9-3.3 km/s into semi-infinite targets

In this study, a combined experimental, numerical and theoretical investigation is conducted on the penetration of semi-infinite 4340 steel targets by a homogeneous 93 W rod and two types of jacketed rods with striking velocities of 0.9-3.3 km/s. The results show that the jacketed rods produced typical“co-erosion” damage at all test velocities, except for the 93 W/1060 Al jacketed rod, which switched from an early “bi-erosion” damage to later “co-erosion” damage at a striking velocity of 936 m/s. However, the homogeneous 93 W rod always forms a large mushroom head during the penetration process. The damage mechanisms of these two types of jacketed rods differ for striking velocities of 0.9-2.0 km/s, but this difference gradually decreases with increased striking velocity. For velocities of 2.0-3.3 km/s, all three types of projectiles exhibit typical hydrodynamic penetration characteristics, and the damage mechanisms of the two types of jacketed rods are almost identical. For the same initial kinetic energy, the penetration performance of the jacketed rods is distinctly superior to that of the homogeneous 93 W rods.Compared with jacket density, jacket strength shows a more significant influence on the damage mechanism and penetration performance of the jacketed rod. Finally, an existing theoretical prediction model of the penetration depth of jacketed rods on semi-infinite targets in the co-erosion mode is modified. It transpires that-in terms of penetration depth-the modified theoretical model is in good agreement with the experimental and numerical observations for 93 W/TC4 and 93 W/1060 Al jacketed rods penetrating semi-infinite 4340 steel targets.

CONTINUOUS CASTING TECHNOLOGY OF SINGLE CRYSTAL COPPER ROD

ＣＯＮＴＩＮＵＯＵＳＣＡＳＴＩＮＧＴＥＣＨＮＯＬＯＧＹＯＦＳＩＮＧＬＥＣＲＹＳＴＡＬＣＯＰＰＥＲＲＯＤ①ＸｕＺｈｅｎｇｍｉｎｇ，ＬｉＪｉａｎｇｕｏａｎｄＦｕＨｅｎｇｚｈｉＳｔａｔｅＫｅｙＬａｂｏｒａｔｏｒｙｏｆＳｏｌｉｄｉｆｉｃａｔｉｏｎＰｒｏｃｅｓ...

Mei symmetry and conserved quantities in Kirchhoff thin elastic rod statics

We investigate the application of the Mei symmetry analysis in finding conserved quantities for the thin elastic rod statics. By using the Mei symmetry analysis, we have obtained the Jacobi integral and the cyclic integrals for a thin elastic rod with intrinsic twisting for both the cases of circular and non-circular cross sections. Our results can be easily reduced to the results without the intrinsic twisting that have been reported. Through calculation, we find that the Noether symmetry can be more directly and easily used than the Mei symmetry in finding the first integrals for the thin elastic rod. These first integrals will be helpful in the study of exact solutions and stability, as well as the numerical simulation of the elastic rod model for DNA.

Bi/Bi_(3)Se_(4) nanoparticles embedded in hollow porous carbon nanorod:High rate capability material for potassium-ion batteries

Considering their superior theoretical capacity and low voltage plateau,bismuth(Bi)-based materials are being widely explored for application in potassium-ion batteries(PIBs).Unfortunately,pure Bi and Bibased compounds suffer from severe electrochemical polarization,agglomeration,and dramatic volume fluctuations.To develop an advanced bismuth-based anode material with high reactivity and durability,in this work,the pyrolysis of Bi-based metal-organic frameworks and in-situ selenization techniques have been successfully used to produce a Bi-based composite with high capacity and unique structure,in which Bi/Bi_(3)Se_(4)nanoparticles are encapsulated in carbon nanorods(Bi/Bi_(3)Se_(4)@CNR).Applied as the anode material of PIBs,the Bi/Bi_(3)Se_(4)@CNR displays fast potassium storage capability with 307.5 m A h g^(-1)at 20 A g^(-1)and durable cycle performance of 2000 cycles at 5 A g^(-1).Notably,the Bi/Bi_(3)Se_(4)@CNR also showed long cycle stability over 1600 cycles when working in a full cell system with potassium vanadate as the cathode material,which further demonstrates its promising potential in the field of PIBs.Additionally,the dual potassium storage mechanism of the Bi/Bi_(3)Se_(4)@CNR based on conversion and alloying reaction has also been revealed by in-situ X-ray diffraction.

Investigations of high-frequency induction hardening process for piston rod of shock absorber

The microhardness of piston rods treated with different induction hardening processes was tested. The experimental results reveal that the depth of the hardened zone is proportional to the ratio of the moving speed of the piston rod to the output power of the induction generator. This result is proved correct through the Finite Element Method (FEM) simulation of the thermal field of induction heating. From tensile and impact tests, an optimized high frequency induction hardening process for piston rods has been obtained, where the output power was 82%×80 kW and the moving speed of workpiece was 5364 mm/min. The piston rods, treated by the optimized high frequency induction hardening process, show the best comprehensive mechanical performance.

基于高铁枢纽地区综合开发的ROD模式解析

从当前我国高速铁路综合交通枢纽发展的趋势和特点的背景入手,就高铁交通枢纽的开发内涵、开发意义进行论述,并通过两个具体实例对其地区开发的整合性与宣居性进行探讨。最后解析了基于高速铁路客运枢纽地区综合开发的ROD模式的基本特征。

Study of the axial density/impedance gradient composite long rod hypervelocity penetration into a four-layer Q345 target

Based on the dynamic shock response of the material and structure,the hypervelocity impact processes and mechanisms of long composite rods with axial density/impedance gradients penetration into fourlayer targets were studied through experiments and numerical simulation methods.The propagation law of the shock waves,together with the structural responses of the projectiles and targets,the formation and evolution of the fragment groups formed during the processes and their distributions were described.The damage of each target plate was quantitatively analysed by comparing the results of the experiment and numerical simulation.The results showed that the axial density/impedance gradient projectiles could decrease the impact pressure to a certain extent,and the degree of damage to the target plate decreased layer by layer when the head density/impedance of the projectile was high.When the head density/impedance of the projectile was low,the degree of target damage first increased layer by layer until the projectile was completely eroded and then it decreased.The results can provide a reference for the design and application of long rods with axial composite structure for velocities ranging from 6 to 10 Ma or greater.

Development and validation of a new oxide fuel rod performance analysis code for the liquid metal fast reactor

The integrity and reliability of fuel rods under both normal and accidental operating conditions are of great importance for nuclear reactors.In this study,considering various irradiation behaviors,a fuel rod performance analysis code,named KMC-Fueltra,was developed to evaluate the thermal–mechanical performance of oxide fuel rods under both normal and transient conditions in the LMFR.The accuracy and reliability of the KMC-Fueltra were validated by analytical solutions,as well as the results obtained from codes and experiments.The results indicated that KMC-Fueltra can predict the performance of oxide fuel rods under both normal and transient conditions in the LMFR.

蔬菜钵苗自动移栽机纵向送盘机构设计与试验

为进一步提高蔬菜钵苗自动移栽机纵向送盘机构的精确性与稳定性,提出一种由凸轮连杆与扇形齿轮驱动的四连杆纵向送盘机构。首先,通过分析纵向送盘工作过程,确定机构设计要求与整体方案,规划理想的纵向送盘轨迹,建立了纵向送盘机构轨迹综合模型,并利用遗传算法进行了初步求解。然后,基于Matlab GUI开发了纵向送盘机构可视化计算机辅助优化分析软件,获得满足设计要求的纵向送盘机构设计参数。最后,对纵向送盘机构进行了结构设计、仿真分析和试验验证,结果表明:试验实际轨迹与理论、仿真轨迹基本一致;移栽效率为80、90株/(min·行)时,机构单次送盘误差均在±1.5 mm以内,且多次送盘后没有出现累积误差,同时通过取苗试验观察发现纵向送盘机构与取苗机构配合良好,验证了机构设计的合理性。

铸态下Sn-Bi二元共晶焊料合金的组织特征及其力学性能

研究了四种不同Bi含量(45%、50%、55%、60%)的Sn-Bi二元共晶合金自由凝固下的组织特征和力学性能,探讨了Sn-Bi二元共晶合金的晶体生长机制以及Bi元素含量对合金显微组织的影响。结果表明:Sn-Bi二元亚共晶合金铸态下的金相组织为初生Sn固溶体相和Sn/Bi共晶层片集群构成,随着Bi含量的增加,呈树枝晶形态生长的初生Sn相数量减少,形态长大。初生Sn固溶体相内部脱溶析出大量的杆状或点状Bi相,形成杆状共晶结构;Sn-Bi二元过共晶合金铸态下的金相组织为初生Bi相和Sn/Bi共晶层片集群构成,初生Bi相中基本不固溶Sn元素,呈小平面方式生长,并在在初生Bi相周围包裹生长一层Sn晕圈相。在室温下,Sn-Bi二元共晶合金的硬度和强度随着Bi含量的增加而上升,延伸率随着Bi含量的增加先上升后下降。

含多关节间隙平面柔性六杆机构的动力学分析

为提高机构的动力学分析精度,基于平面六杆机构,同时考虑多个关节间隙与构件柔性对多体机构动力学响应的影响。通过实体建模和引用ADAMS软件中“冲击函数”接触力模型,对含有多个间隙关节与柔性连杆的六杆机构进行动力学模拟仿真,研究间隙数量、间隙位置、间隙大小、柔性连杆及其与间隙耦合对系统动力学性能影响。研究结果表明:与单关节间隙相比,多关节间隙会产生更大的接触力,导致构件的加速度波动更加剧烈;间隙关节距离电机位置越近,则对机构的动力学行为影响越明显;考虑连杆柔性时,可以极大地降低间隙对机构动力学波动的影响。

岩爆机制及其控制

随着岩体工程向深部发展,开挖引发的围岩大变形和强冲击诱发的动力破坏日益严峻。岩爆作为深部地下工程中常见的一种强动力灾害,被称为岩土工程界的“癌症”,其具有突发性特点,难以有效预报及防治,严重地威胁着施工人员的安全和设备的正常运行。通过对比岩石在真三轴卸荷和单轴压缩这2种应力路径下的储能差异,对岩爆多余能量机制进行探讨。首先,根据岩爆诱发机制的不同,将岩爆分为由应力集中导致的应变型岩爆和扰动诱发的冲击岩爆。然后,模拟开挖诱发的不同类型岩爆的应力路径进而在室内再现各种岩爆现象,并对其机制进行研究,自主研发3套真三轴岩爆模拟试验系统:第1代应变岩爆试验系统、第2代应变岩爆试验系统、冲击岩爆试验系统。同时,在实验室内成功模拟不同类型的岩爆:巷道应变岩爆、巷道交叉点应变岩爆、3个临空面矿柱应变岩爆、矿柱应变岩爆以及动荷载诱发的冲击岩爆。最后,为有效控制岩爆灾害,提出开挖补偿法,并研发具有负泊松比效应的宏观和微观NPR锚杆/索。工程实践证明,NPR锚杆/索能提供高预应力来补偿开挖造成的应力损失,同时具备良好的延展性和吸能效果,可为岩爆灾害的防治提供有效途径。