A simulation of winter wheat crop responses to irrigation management using CERES-Wheat model in the North China Plain

To improve efficiency in the use of water resources in water-limited environments such as the North China Plain（NCP）, where winter wheat is a major and groundwater-consuming crop, the application of water-saving irrigation strategies must be considered as a method for the sustainable development of water resources. The initial objective of this study was to evaluate and validate the ability of the CERES-Wheat model simulation to predict the winter wheat grain yield, biomass yield and water use efficiency（WUE） responses to different irrigation management methods in the NCP. The results from evaluation and validation analyses were compared to observed data from 8 field experiments, and the results indicated that the model can accurately predict these parameters. The modified CERES-Wheat model was then used to simulate the development and growth of winter wheat under different irrigation treatments ranging from rainfed to four irrigation applications（full irrigation） using historical weather data from crop seasons over 33 years（1981–2014）. The data were classified into three types according to seasonal precipitation： 〈100 mm, 100–140 mm, and 〉140 mm. Our results showed that the grain and biomass yield, harvest index（HI） and WUE responses to irrigation management were influenced by precipitation among years, whereby yield increased with higher precipitation. Scenario simulation analysis also showed that two irrigation applications of 75 mm each at the jointing stage and anthesis stage（T3） resulted in the highest grain yield and WUE among the irrigation treatments. Meanwhile, productivity in this treatment remained stable through different precipitation levels among years. One irrigation at the jointing stage（T1） improved grain yield compared to the rainfed treatment and resulted in yield values near those of T3, especially when precipitation was higher. These results indicate that T3 is the most suitable irrigation strategy under variable precipitation regimes for stable yield of winter wheat with maximum water savings in the NCP. The application of one irrigation at the jointing stage may also serve as an alternative irrigation strategy for further reducing irrigation for sustainable water resources management in this area.

Determination of Reference Evapotranspiration Using Penman-Monteith Method in Case of Missing Wind Speed Data under Subhumid Climatic Condition in Hungary

The reference evapotranspiration was calculated using Penman-Monteith method proposed. This method was evaluated on data measured by lysimeter in Szarvas experimental station in Hungary. The results of the two methods were in good agreement. However, this method requires an amount of data which is not available at all sites of meteorological measurement. Therefore it was necessary to investigate which elements influencing evapotranspiration are important and which elements are less important. With the help of investigation was indicated that radiation and vapor pressure deficit play important role in determination of reference evapotranspiration. Taking into account this there was two possibilities to calculate evapotranspiration. One of these is to use Penman-Monteith formula with constant wind speed as advised by Allen. Another one is to neglect wind speed data. Both methods were investigated and the method with constant wind speed was found better in a subhumid climatic condition of Hungary.

Study on Rice Water Requirement of Liangping County under Climate Change Background

Under global climate change background,using daily meteorological data at Liangping ground meteorological station during 1961- 2012,we calculated crop water requirement and net irrigation water requirement during rice growth period in Liangping County,and analyzed its climate tendency rate. Results showed that climate tendency rate of crop water requirement during growth period of rice was only- 0. 007 mm /10 a; climate tendency rate of rainfall was- 0. 06 mm /10 a,but interannual change was relatively larger; climate tendency rate of net irrigation water requirement was 0. 011 mm /10 a. In the years when drought occurred,such as 2006 and 2011,both rice water requirement and net irrigation water requirement in Liangping were greatly higher than means over the years. Therefore,we should focus on drought pre-warning and risk management improving drought disaster prevention in Liangping in the future.

Mechanization of irrigated rice cropping regions in China

The mechanization of rice production in China has experienced a comparatively long and an undulating process. The full-scale making of mechanization of irrigated rice cropping regions was started at the mid 1960’s, later than that of upland cropping and its average level of mechanization operation also lower than the average level of the country. During this peiod, however, a series of mechines were created, which adapted to the characteristics of rice cropping regions in China, and the foundation was laid for the later paddy field machinery. For example, transplanting machine (created in 1956), boat—shaped tractors (1961), paddy field ploughing and harrowing serial (1974), and single wheel plowing machines (1979) etc.