Eco-friendly and biodegradable novel hydrogel were prepared by blending and solution casting method. The designed hydrogel is based on chitosan/ PEG600/Gurgam with carbon nanofiller along silane crosslinked (TEOS) wit...Eco-friendly and biodegradable novel hydrogel were prepared by blending and solution casting method. The designed hydrogel is based on chitosan/ PEG600/Gurgam with carbon nanofiller along silane crosslinked (TEOS) with pH sensitive response to controlled release of drug in biomedical materials and agriculture industry. The various concentration of carbon nanofiller is used to analyze its effect on the fabricated hydrogel characteristics by using FTIR, SEM, TGA, swelling studies (water, buffer and ionic solution). Spectra of FTIR reflected both established and newly developed groups (like hydrogel). COOH group presence is clearly observed in this range in the carbon filler reinforced hydrogel. The SEM micrographs show that CPG0.003 had a collection of polysaccharide chains as thin helices, which is attributed to the increase in the size of porosity. TGA shows to increase concentration of nanofiller enhanced the thermal stability of the designed hydrogels at temperature 25˚C to 550˚C mass loss percentage decrease upto 20% and increase thermal stability. This pH response made these resultant hydrogels as fruitful competitor against the many reported controlled release application.展开更多
Peroxide-cured high-temperature vulcanized （HTV） silicone rubber was prepared by using allyl-capped carbosilane dendrimers, in which the core molecule is Si（CHaCH=CH2）4, as the cross-linker. It showed that this ki...Peroxide-cured high-temperature vulcanized （HTV） silicone rubber was prepared by using allyl-capped carbosilane dendrimers, in which the core molecule is Si（CHaCH=CH2）4, as the cross-linker. It showed that this kind of allyl-capped carbosilane dendrimer improved the mechanical properties of silicone rubber.展开更多
The overall cross-linking copolymerization of acrylic acid and multi-armed cross-linkers are investigated by in situ interferometry. The results show that the more arms the cross-linkers have, the higher the polymeriz...The overall cross-linking copolymerization of acrylic acid and multi-armed cross-linkers are investigated by in situ interferometry. The results show that the more arms the cross-linkers have, the higher the polymerization rate is. However, they also mean the existence of less cross-linking efficiency and some defects in gel network.展开更多
Polyaddition using isocyanate and polyol forms polyurethane elastomer (PUE). However, this method has rarely been applied to the construction of PUEs containing sucrose. Hence, the introduction of sucrose (disaccharid...Polyaddition using isocyanate and polyol forms polyurethane elastomer (PUE). However, this method has rarely been applied to the construction of PUEs containing sucrose. Hence, the introduction of sucrose (disaccharide) as a cross-linker via polyaddition remains a challenging subject in polymer chemistry. Here, we report the synthesis of PUEs using an aromatic isocyanate (4,4’-diphenylmethane diisocyanate), polyols including a polyether polyol (polytetramethylene glycol) and two polyester polyols (polycaprolactone and polycarbonate diols), and sucrose as a crosslinker by a one-shot method. The PUEs containing sucrose were successfully produced. The use of sucrose was essential to obtain the desired PUEs containing sucrose units in the main chain.展开更多
A series of polyurethane elastomers (PUEs) were synthesized by using β-cyclodextrin (β-CD) as cross-linker from aliphatic, alicyclic, aromatic diisocyanates, and polyol. The PUEs were characterized by Fourier Transf...A series of polyurethane elastomers (PUEs) were synthesized by using β-cyclodextrin (β-CD) as cross-linker from aliphatic, alicyclic, aromatic diisocyanates, and polyol. The PUEs were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), swelling test, hardness test and tensile test. The influence of diisocyanate on microphase separation and properties of PUEs was evaluated.展开更多
文摘Eco-friendly and biodegradable novel hydrogel were prepared by blending and solution casting method. The designed hydrogel is based on chitosan/ PEG600/Gurgam with carbon nanofiller along silane crosslinked (TEOS) with pH sensitive response to controlled release of drug in biomedical materials and agriculture industry. The various concentration of carbon nanofiller is used to analyze its effect on the fabricated hydrogel characteristics by using FTIR, SEM, TGA, swelling studies (water, buffer and ionic solution). Spectra of FTIR reflected both established and newly developed groups (like hydrogel). COOH group presence is clearly observed in this range in the carbon filler reinforced hydrogel. The SEM micrographs show that CPG0.003 had a collection of polysaccharide chains as thin helices, which is attributed to the increase in the size of porosity. TGA shows to increase concentration of nanofiller enhanced the thermal stability of the designed hydrogels at temperature 25˚C to 550˚C mass loss percentage decrease upto 20% and increase thermal stability. This pH response made these resultant hydrogels as fruitful competitor against the many reported controlled release application.
文摘Peroxide-cured high-temperature vulcanized （HTV） silicone rubber was prepared by using allyl-capped carbosilane dendrimers, in which the core molecule is Si（CHaCH=CH2）4, as the cross-linker. It showed that this kind of allyl-capped carbosilane dendrimer improved the mechanical properties of silicone rubber.
文摘The overall cross-linking copolymerization of acrylic acid and multi-armed cross-linkers are investigated by in situ interferometry. The results show that the more arms the cross-linkers have, the higher the polymerization rate is. However, they also mean the existence of less cross-linking efficiency and some defects in gel network.
文摘Polyaddition using isocyanate and polyol forms polyurethane elastomer (PUE). However, this method has rarely been applied to the construction of PUEs containing sucrose. Hence, the introduction of sucrose (disaccharide) as a cross-linker via polyaddition remains a challenging subject in polymer chemistry. Here, we report the synthesis of PUEs using an aromatic isocyanate (4,4’-diphenylmethane diisocyanate), polyols including a polyether polyol (polytetramethylene glycol) and two polyester polyols (polycaprolactone and polycarbonate diols), and sucrose as a crosslinker by a one-shot method. The PUEs containing sucrose were successfully produced. The use of sucrose was essential to obtain the desired PUEs containing sucrose units in the main chain.
文摘A series of polyurethane elastomers (PUEs) were synthesized by using β-cyclodextrin (β-CD) as cross-linker from aliphatic, alicyclic, aromatic diisocyanates, and polyol. The PUEs were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), swelling test, hardness test and tensile test. The influence of diisocyanate on microphase separation and properties of PUEs was evaluated.
