The influences of large earthquake signals on the recovery of surface waves from ambient noise cross-correlation functions

Ambient noise tomography(ANT)has been widely used to image crust and upmost mantle structures.ANT assumes that sources of ambient noise are diffuse and evenly distributed in space and the energy of different modes is equipartitioned.At present,the sources of the primary and the secondary microseisms are well studied,but there are only a few on the studies of long-period ambient noise sources.In this study,we study the effects of large earthquake signals on the recovery of surface waves from seismic ambient noise data recorded by seismic stations from the US permanent networks and Global Seismographic Network(GSN).Our results show that large earthquake signals play an important role on the recovery of long-period surface waves from ambient noise cross-correlation functions.Our results are consistent with previous studies that suggest the contribution of earthquake signals to the recovery of surface waves from cross-correlations of ambient noise is dominant at periods larger than 20–40 s.

STUDY ON ALGORITHM OF SENSOR MANAGEMENT BASED ON FUNCTIONS OF EFFICIENCY AND WASTE

Sensor management plays an important role in data fusion system, and this paper presents an algorithm of sensor management that can be used in target detection, identification and tracking. First, the basic concept, rule, range and function of sensor management are introduced. Then, the quantifying problems of target priority and sensor (or combination)-target pairing in multisensor management are discussed and the efficiency and waste functions are established based on the functions of target priority and sensor-target pairing. On this basis, a distribution algorithm of multi-sensor resources is given, which is optimized by the principle of maximum synthesis efficiency in the multisensor system and constrained by sensor maximum tracking power and what target must be scanned. In addition, the waste measure of sensor resources is introduced to improve the algorithm. Finally, a tactical task that includes three sensors and ten targets is set, and the simulation results show that the algorithm is feasible and effective.

A New Evolutionary Algorithm for Function Optimization

A new algorithm based on genetic algorithm(GA) is developed for solving function optimization problems with inequality constraints. This algorithm has been used to a series of standard test problems and exhibited good performance. The computation results show that its generality, precision, robustness, simplicity and performance are all satisfactory.

Adaptive immune-genetic algorithm for global optimization to multivariable function

An adaptive immune-genetic algorithm （AIGA） is proposed to avoid premature convergence and guarantee the diversity of the population. Rapid immune response （secondary response）, adaptive mutation and density operators in the AIGA are emphatically designed to improve the searching ability, greatly increase the converging speed, and decrease locating the local maxima due to the premature convergence. The simulation results obtained from the global optimization to four multivariable and multi-extreme functions show that AIGA converges rapidly, guarantees the diversity, stability and good searching ability.

A Parallel Global-Local Mixed Evolutionary Algorithm for Multimodal Function Optimization Based on Domain Decomposition

This paper presents a parallel two-level evolutionary algorithm based on domain decomposition for solving function optimization problem containing multiple solutions. By combining the characteristics of the global search and local search in each sub-domain, the former enables individual to draw closer to each optima and keeps the diversity of individuals, while the latter selects local optimal solutions known as latent solutions in sub-domain. In the end, by selecting the global optimal solutions from latent solutions in each sub-domain, we can discover all the optimal solutions easily and quickly.

Reconstruction of sub cross-correlation cancellation technique for unambiguous acquisition of BOC(kn, n) signals

In order to solve the problem of ambiguous acquisition of BOC signals caused by its property of multiple peaks,an unambiguous acquisition algorithm named reconstruction of sub cross-correlation cancellation technique(RSCCT)for BOC(kn,n)signals is proposed.In this paper,the principle of signal decomposition is combined with the traditional acquisition algorithm structure,and then based on the method of reconstructing the correlation function.The method firstly gets the sub-pseudorandom noise(PRN)code by decomposing the local PRN code,then uses BOC(kn,n)and the sub-PRN code cross-correlation to get the sub cross-correlation function.Finally,the correlation peak with a single peak is obtained by reconstructing the sub cross-correlation function so that the ambiguities of BOC acquisition are removed.The simulation shows that RSCCT can completely eliminate the side peaks of BOC(kn,n)group signals while maintaining the narrow correlation of BOC,and its computational complexity is equivalent to sub carrier phase cancellation(SCPC)and autocorrelation side-peak cancellation technique(ASPeCT),and it reduces the computational complexity relative to BPSK-like.For BOC(n,n),the acquisition sensitivity of RSCCT is 3.25 dB,0.81 dB and 0.25 dB higher than binary phase shift keying(BPSK)-like,SCPC and ASPeCT at the acquisition probability of 90%,respectively.The peak to average power ratio is 1.91,3.0 and 3.7 times higher than ASPeCT,SCPC and BPSK-like at SNR=–20 dB,respectively.For BOC(2n,n),the acquisition sensitivity of RSCCT is 5.5 dB,1.25 dB and 2.69 dB higher than BPSK-like,SCPC and ASPeCT at the acquisition probability of 90%,respectively.The peak to average power ratio is 1.02,1.68 and 2.12 times higher than ASPeCT,SCPC and BPSK-like at SNR=–20 dB,respectively.

Two-Phase Genetic Algorithm Applied in the Optimization of Multi-Modal Function

This paper presents a two-phase genetic algorithm (TPGA) based on the multi- parent genetic algorithm (MPGA). Through analysis we find MPGA will lead the population' s evol vement to diversity or convergence according to the population size and the crossover size, so we make it run in different forms during the global and local optimization phases and then forms TPGA. The experiment results show that TPGA is very efficient for the optimization of low-dimension multi-modal functions, usually we can obtain all the global optimal solutions.

Utility function based fair data scheduling algorithm for OFDM wireless network

A system model is formulated as the maximization of a total utility function to achieve fair downlink data scheduling in multiuser orthogonal frequency division multiplexing （OFDM） wireless networks. A dynamic subcarrier allocation algorithm （DSAA） is proposed, to optimize the system model. The subcarrier allocation decision is made by the proposed DSAA according to the maximum value of total utility function with respect to the queue mean waiting time. Simulation results demonstrate that compared to the conventional algorithms, the proposed algorithm has better delay performance and can provide fairness under different loads by using different utility functions.

Temporal-spatial cross-correlation analysis of non-stationary near-surface wind speed time series

Temporal-spatial cross-correlation analysis of non-stationary wind speed time series plays a crucial role in wind field reconstruction as well as in wind pattern recognition.Firstly,the near-surface wind speed time series recorded at different locations are studied using the detrended fluctuation analysis(DFA),and the corresponding scaling exponents are larger than 1.This indicates that all these wind speed time series have non-stationary characteristics.Secondly,concerning this special feature( i.e.,non-stationarity)of wind signals,a cross-correlation analysis method,namely detrended cross-correlation analysis(DCCA) coefficient,is employed to evaluate the temporal-spatial cross-correlations between non-stationary time series of different anemometer pairs.Finally,experiments on ten wind speed data synchronously collected by the ten anemometers with equidistant arrangement illustrate that the method of DCCA cross-correlation coefficient can accurately analyze full-scale temporal-spatial cross-correlation between non-stationary time series and also can easily identify the seasonal component,while three traditional cross-correlation techniques(i.e.,Pearson coefficient,cross-correlation function,and DCCA method) cannot give us these information directly.

Detrended cross-correlation analysis of electroencephalogram

In the paper we use detrended cross-correlation analysis （DCCA） to study the electroencephalograms of healthy young subjects and healthy old subjects. It is found that the cross-correlation between different leads of a healthy young subject is larger than that of a healthy old subject. It was shown that the cross-correlation relationship decreases with the aging process and the phenomenon can help to diagnose whether the subject＇s brain function is healthy or not.

An Approach for Network Function Combination Based on Least Busy Placement Algorithm

Recently, integrating Softwaredefined networking(SDN) and network functions virtualization(NFV) are proposed to address the issue that difficulty and cost of hardwarebased and proprietary middleboxes management. However, it lacks of a framework that orchestrates network functions to service chain in the network cooperatively. In this paper, we propose a function combination framework that can dynamically adapt the network based on the integration NFV and SDN. There are two main contributions in this paper. First, the function combination framework based on the integration of SDN and NFV is proposed to address the function combination issue, including the architecture of Service Deliver Network, the port types representing traffic directions and the explanation of terms. Second, we formulate the issue of load balance of function combination as the model minimizing the standard deviations of all servers' loads and satisfying the demand of performance and limit of resource. The least busy placement algorithm is introduced to approach optimal solution of the problem. Finally, experimental results demonstrate that the proposed method can combine functions in an efficient and scalable way and ensure the load balance of the network.

A Two-Level Subspace Evolutionary Algorithm for Solving Multi-Modal Function Optimization Problems

In this paper, a new algorithm for solving multi-modal function optimization problems-two-level subspace evolutionary algorithm is proposed. In the first level, the improved GT algorithm is used to do global recombination search so that the whole population can be separated into several niches according to the position of solutions; then, in the second level, the niche evolutionary strategy is used for local search in the subspaces gotten in the first level till solutions of the problem are found. The new algorithm has been tested on some hard problems and some good results are obtained.

DETERMINING THE STRUCTURES AND PARAMETERS OF RADIAL BASIS FUNCTION NEURAL NETWORKS USING IMPROVED GENETIC ALGORITHMS

The method of determining the structures and parameters of radial basis function neural networks(RBFNNs) using improved genetic algorithms is proposed. Akaike′s information criterion (AIC) with generalization error term is used as the best criterion of optimizing the structures and parameters of networks. It is shown from the simulation results that the method not only improves the approximation and generalization capability of RBFNNs ,but also obtain the optimal or suboptimal structures of networks.

SELECTION OF OBJECTIVE FUNCTIONS AND APPLICATION OF GENETIC ALGORITHMS IN DAMPING DESIGN OF PIPE SYSTEM

The vibration failure of pipe system of aeroengine seriously influences the safety of aircraft.Its damping design is determined by the selection of the design target,method and their feasibility.Five objective functions for the vibration design of a pipeline or pipe system are introduced,namely,the frequency,amplitude,transfer ratio,curvature and deformation energy as options for the optimization process.The genetic algorithms(GA)are adopted as the opti- mization method,in which the selection of the adaptive genetic operators and the method of implementation of the GA process are crucial.The optimization procedure for all the above ob- jective functions is carried out using GA on the basis of finite element software-MSC/NASTRAN. The optimal solutions of these functions and the stress distribution on the structure are calculated and compared through an example,and their characteristics are analyzed.Finally we put forward two new objective functions,curvature and deformation energy for pipe system optimization.The calculations show that using the curvature as the objective function can reflect the case of minimal stress,and the optimization results using the deformation energy represent lesser and more uni- form stress distribution.The calculation results and process showed that the genetic algorithms can effectively implement damping design of engine pipelines and satisfy the efficient engineering design requirement.

Correcting the systematic error of the density functional theory calculation:the alternate combination approach of genetic algorithm and neural network

The alternate combinational approach of genetic algorithm and neural network （AGANN） has been presented to correct the systematic error of the density functional theory （DFT） calculation. It treats the DFT as a black box and models the error through external statistical information. As a demonstration, the ACANN method has been applied in the correction of the lattice energies from the DFT calculation for 72 metal halides and hydrides. Through the AGANN correction, the mean absolute value of the relative errors of the calculated lattice energies to the experimental values decreases from 4.93% to 1.20% in the testing set. For comparison, the neural network approach reduces the mean value to 2.56%. And for the common combinational approach of genetic algorithm and neural network, the value drops to 2.15%. The multiple linear regression method almost has no correction effect here.

A two-grid algorithm based on Newton iteration for the stream function form of the Navier-Stokes equations

In this paper, we propose a two-grid algorithm for solving the stream function formulation of the stationary Navies-Stokes equations. The algorithm is constructed by reducing the original system to one small, nonlinear system on the coarse mesh space and two similar linear systems （with same stiffness matrix but different right-hand side） on the fine mesh space. The convergence analysis and error estimation of the algorithm are given for the case of conforming elements. Furthermore, the Mgorithm produces a numerical solution with the optimal asymptotic H^2-error. Finally, we give a numerical illustration to demonstrate the effectiveness of the two-grid algorithm for solving the Navier-Stokes equations.

Elitism-based immune genetic algorithm and its application to optimization of complex multi-modal functions

A novel immune genetic algorithm with the elitist selection and elitist crossover was proposed, which is called the immune genetic algorithm with the elitism （IGAE）. In IGAE, the new methods for computing antibody similarity, expected reproduction probability, and clonal selection probability were given. IGAE has three features. The first is that the similarities of two antibodies in structure and quality are all defined in the form of percentage, which helps to describe the similarity of two antibodies more accurately and to reduce the computational burden effectively. The second is that with the elitist selection and elitist crossover strategy IGAE is able to find the globally optimal solution of a given problem. The third is that the formula of expected reproduction probability of antibody can be adjusted through a parameter r, which helps to balance the population diversity and the convergence speed of IGAE so that IGAE can find the globally optimal solution of a given problem more rapidly. Two different complex multi-modal functions were selected to test the validity of IGAE. The experimental results show that IGAE can find the globally maximum/minimum values of the two functions rapidly. The experimental results also confirm that IGAE is of better performance in convergence speed, solution variation behavior, and computational efficiency compared with the canonical genetic algorithm with the elitism and the immune genetic algorithm with the information entropy and elitism.

A Simulated Annealing Algorithm for Training Empirical Potential Functions of Protein Folding

In this paper are reported the local minimum problem by means of current greedy algorithm for training the empirical potential function of protein folding on 8623 non-native structures of 31 globular proteins and a solution of the problem based upon the simulated annealing algorithm. This simulated annealing algorithm is indispensable for developing and testing highly refined empirical potential functions.

Soft Tissue Deformation Model Based on Marquardt Algorithm and Enrichment Function

In order to solve the problem of high computing cost and low simulation accuracy caused by discontinuity of incision in traditional meshless model,this paper proposes a soft tissue deformation model based on the Marquardt algorithm and enrichment function.The model is based on the element-free Galerkin method,in which Kelvin viscoelastic model and adjustment function are integrated.Marquardt algorithm is applied to fit the relation between force and displacement caused by surface deformation,and the enrichment function is applied to deal with the discontinuity in the meshless method.To verify the validity of the model,the Sensable Phantom Omni force tactile interactive device is used to simulate the deformations of stomach and heart.Experimental results show that the proposed model improves the real-time performance and accuracy of soft tissue deformation simulation,which provides a new perspective for the application of the meshless method in virtual surgery.

Genetic Algorithm for the Thermal Stresses Optimum Design ofFunctionally Gradient Material Plate

Based on the thermal stress distribution for functionally gradient material (FGM) plates, a Genetic Algorithm (GA) method for the thermal stresses optimum design of FGM plate with computer technologies is given. The minimum thermal stresses combination distribution for FGM is obtained.