Up-Sampled Cross-Correlation Based Object Tracking & Vibration Measurement in Agriculture Tractor System

This research introduces a challenge in integrating and cleaning the data,which is a crucial task in object matching.While the object is detected and then measured,the vibration at different light intensities may influence the durability and reliability of mechanical systems or structures and cause problems such as damage,abnormal stopping,and disaster.Recent research failed to improve the accuracy rate and the computation time in tracking an object and in the vibration measurement.To solve all these problems,this proposed research simplifies the scaling factor determination by assigning a known real-world dimension to a predetermined portion of the image.A novel white color sticker of the known dimensions marked with a color dot is pasted on the surface of an object for the best result in the template matching using the Improved Up-Sampled Cross-Correlation(UCC)algorithm.The vibration measurement is calculated using the Finite-Difference Algorithm(FDA),a machine vision systemfitted with a macro lens sensor that is capable of capturing the image at a closer range,which does not affect the quality of displacement measurement from the video frames.Thefield test was conducted on the TAFE(Tractors and Farm Equipment Limited)tractor parts,and the percentage of error was recorded between 30%and 50%at very low vibration values close to zero,whereas it was recorded between 5%and 10%error in most high-accelerations,the essential range for vibration analysis.Finally,the suggested system is more suitable for measuring the vibration of stationary machinery having low frequency ranges.The use of a macro lens enables to capture of image frames at very close-ups.A 30%to 50%error percentage has been reported when the vibration amplitude is very small.Therefore,this study is not suitable for Nano vibration analysis.

Construction Technology and Safety Risk Control Measures of Deep Foundation Pit Excavation

Deep foundation pit excavation is a basic and key step involved in modern building construction.In order to ensure the construction quality and safety of deep foundation pits,this paper takes a project as an example to analyze deep foundation pit excavation technology,including the nature of this construction project,the main technical measures in the construction of deep foundation pit,and the analysis of the safety risk prevention and control measures.The purpose of this analysis is to provide scientific reference for the construction quality and safety of deep foundation pits.

Velocity Measurement and Freezing Technology of Multi-shot Pellet on HL-1M Tokamak

A measuring system for high-speed hydrogen ice pellet was introduced in this paper and the photographing of flying pellet taken therein. With the system, a pellet (minimum size of φ 0.3 mm) velocity (ranging from 50 m/s to 2500 m/s) can be measured in the HL-1M tokamak fueling experiments. By analyzing photographs and the conditions of frozen pellets (including gas supply, gas replenishment, temperature controlling etc), the pellet-freezing technology is summarized in the paper.

Research of Entropy-Based Overall Performance Measurement Model of Enterprises Technology Alliance

The performance measurement of enterprise technology alliances is complex.In this article,evaluation mechanism of entropy has been applied to it.Above all,performance connotation of enterprise technology alliance is defined from the aspect of self-organizatlon theory.Then,on dynamic and systerna-tical view,an entropy-based overall performance measurement model for technology alliance is established,using its life-cycle as the principal line,which includes initial condition evaluation,process e- valuation as well as benefit evaluation.Finally,a case study is carried out to the demonstration of that model.The author believes that an improved performance measurement model based on alliance life-cycle would be practicability to alliance.

3-Dimensional Body Measurement Technology

3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.

A Study on Applications and Case Studies Regarding Bluetooth Technology for Travel Time Measurement

Bluetooth technology emerged over twenty years ago and has continuously improved throughout the years to meet diverse and complex applications. Initially invented to replace the need for physical data cables, Bluetooth offers users a quick and easy way to share data files over a wireless network. Traffic engineers and transportation engineering researchers have utilized the potential opportunities that exist with Bluetooth and have implemented this technology into traffic monitoring techniques. To gain a better understanding of Bluetooth sensors and how they work, a comprehensive literature search was conducted. Twenty-five articles were studied regarding case studies of Bluetooth sensor implementation for travel time measurement. Besides reviewing the literature and previous case studies, three new case studies in the State of Delaware, USA, were also conducted and carefully analyzed. The benefits and drawbacks associated with Bluetooth technology for travel time measurements have been identified in this paper. The overall conclusion of the authors is Bluetooth alone and by itself is not a proper technology for travel time measurements. More studies need to be conducted on the accuracy and overall application, before one can confidently utilize the Bluetooth technology for travel time measurements.

Roller Profile Online Measurement Based on Ultrasonic Circulation Pulse-echo Technology

In order to meet the high precision requirement of wide steel strip in industry field, a novel online measurement of roller profile based on sonic circulation and pulse-echo technology was introduced. All kinds of the factors influencing the accuracy of roller profile online measurement were analyzed in detail and error compensation analysis of system was accordingly presented. In order to reduce count error, field program gate array(FPGA) was introduced and a highprecision data acquisition system was designed based on digital phase-shift technology. Experiments indicate that the standard deviation of measure data was 7.27 μm, which showed the feasibility and validity of the proposed method, and realized the roll profile measurement with high precision.

Digital measurement of bone tumor volume by CT three-dimensional reconstruction technology

Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital were included in the

Greenhouse gas emission analysis and measurement for urban rail transit: A review of research progress and prospects

Rail transit plays a key role in mitigating transportation system carbon emissions.Accurate measurement of urban rail transit carbon emission can help quantify the contribution of urban rail transit towards urban transportation carbon emission reduction.Since the whole life cycle of urban rail transit carbon emission measurement involves a wide range of aspects,a systematic framework model is required for analysis.This research reviews the existing studies on carbon emission of urban rail transit.First,the characteristics of urban rail transit carbon emission were determined and the complexity of carbon emission measurement was analyzed.Then,the urban rail transit carbon emission measurement models were compared and analyzed in terms of the selection of research boundaries,the types of greenhouse gas(GHG)emissions calculation,and the accuracy of the measurement.Following that,an intelligent station was introduced to analyze the practical application of digital collaboration technology and energy-saving and carbon-reducing system platforms for rail transit.Finally,the urgent problems and future research directions at this stage were discussed.This research presents the necessity of establishing a dynamic carbon emission factor library and the important development trend of system integration of carbon emission measurement and digital system technology.

The study of measuring technology on the dynamic mechanical properties of welded joint with high strainrate

In this paper, to meet the needs of studying work of dynamic mechanical properties of welded joint, the dynamic mechanical properties of welded joint were measured by means of SHPB(Split Hopkinson Pressure Bar).The dynamic mechanical property's curves of every part of welded joint were obtained. For studying the dynamic behavior of mechanical heterogeneity of welded joint, important data were offered. The method of test creates a new way of studying dynamic mechanical properties of welded joint.

Digital Cross-Correlation Detection of Multi-Laser Beams Measuring System for Wind Field Detection

A cross-correlation detection method to process backscatter signals of multi-laser beams measuring （MLBM） is presented, which can be firstly filtered by the digital filter composed of average median filter and finite impulse response （FIR） digital filter. The processing of backscatter signals using single-pulse and three-pulse cross-correlation detection methods is depicted in detail. From calculation results, the multi-pulse cross-correlation detection could effectively improve signal-to-noise ratio （SNR）. Finally, both wind velocity and direction are determined by the peak-delay method based on the correlation function which shows high measuring precision and high SNR of the MLBM system with the assistance of the digital cross- correlation detection.

Ensuring Uniformity of Measurements of Absorbed Doses of Intensive Photon and Electron Radiation in Radiation Technologies

Ensuring reliability and traceability of the unit of absorbed dose of intense photon and electron radiation, used in radiation technologies in industry, is based on the creation of a system of sample measures and methods of transmission with minimal loss of dimensional accuracy of the unit of absorbed dose from the sample tools to working dosimeters and is a necessary basis of yield growth, of increase of labour productivity and the introduction of innovative products. The measuring capabilities of the State primary special standard of power unit of absorbed dose of intensity photon, electron and beta radiation for radiation technologies and of the standards of the absorbed dose of photon and electron radiation, used for radiation monitoring of radiation pro- cesses.

Six Measures to Help SMEs out——An Interview with the Vice Minister of Industry and Information Technology

With the global economic turmoil and the changes in Chinese economic pol- icies in 2008,small,and medium-sized enterprises(SMEs)have all felt the early-coming of a"cold season".They have been undergoing extreme dif- ficulties in doing businesses due to a series of factors including

Construction Technology and Safety Monitoring Measures of Road and Bridge Engineering

With the acceleration of urbanization and the continuous improvement of urban infrastructure construction,roads and bridges,as an important infrastructure content in China,directly affect people's daily travel.Therefore,the construction and management of roads and bridges must be improved to ensure the quality and safety of roads and bridges and effectively prevent safety accidents.Strengthen the management of road and bridge construction through safety monitoring,improve the safety factor of the project and ensure people's travel safety.This paper mainly analyzes the common diseases and construction technology of road and bridge engineering construction,and puts forward safety monitoring measures.

Imbalance Between Scientific Technology and Human Rights and Measures to Rectify the Imbalance——Taking Geological Disasters as an Example

I. Increase in Human Activity and Occurrence of Geological Disasters ＂A geological disaster is a natural disaster that happens in a geo- logical environment. It is a geological effect （phenomenon） caused or in- fluenced by Nature and （or） human factors that leads to losses to human life, property and the environment.TM Based on their cause, geological disasters can be divided into natural geological and artificial geological disasters. Natural geological disas- ters include those caused by natural effects. These include typhoons, rain- fall, melting snow and earthquakes,

Review of Electronic Speckle Pattern Interferometry(ESPI) for Three Dimensional Displacement Measurement

Three dimensional（3D） displacements, which can be translated further into 3D strain, are key parameters tor design, manufacturing and quality control. Using different optical setups, phase-shift methods, and algorithms, several different 3D electronic speckle pattern interferometry（ESPl） systems for displacement and strain measurements have been achieved and commercialized. This paper provides a review of the recent developments in ESPI systems for 3D displacement and strain measurement. After an overview of the fundamentals of ESP! theory, temporal phase-shift, and spatial phase-shift techniques, 3D deformation measurements by the temporal phase-shift ESPI system, which is suited well for static measurement, and by the spatial phase-shift ESPI system, which is particularly useful for dynamic measurement, are discussed. For each method, the basic theory, a brief derivation and different optical layouts are presented. The state of art application, potential and limitation of the ESPI systems are shown and demonstrated.

Application of Uniform Experimental Design in Optimizing Excitation Parameters for Magnetic Frequency Mixing Measurements

Excitation parameter preferences are key factors a ecting the performance of magnetic frequency mixing detection.A uniform experimental design method was used to analyze this influence.Using fuzzy theory,a comprehensive model is established for evaluating the e ect of magnetic frequency mixing.A polynomial is selected as the regression function to express explicitly the correlation between the excitation parameters and the frequency-mixing e ect.The excitation parameters were then optimized using genetic algorithm.Magnetic frequency mixing experiments were conducted to measure the surface hardness of some ferromagnetic materials.Frequency mixing is further enhanced under the optimal settings,resulting in an improvement in the measurement sensitivity.The results of this study support the application of the magnetic frequency mixing technique in non-destructive testing.

The Flow Measurement of Multiphase Flow Based on the Conductance Sensor

Oil-gas-water three-phase flow in the pipe is commonly encountered in the petroleum and nature gas industry. Its flow patterns are complex and always changeable, so it’s difficult to be measured and is becoming one of the most important subjects. Moreover, most of the oil fields in China are in such a high water fraction period that measures must be taken to meet the needs of the actual production. A conductance sensor which is widely used in the measurements of oil-water two-phase flow is used to measure the flow rate of the three-phase flow based on the research of the characteristics and the correlation theory, and a new technical solution which is suitable for measuring the oil-gas-water three-phase flow is established. A series of tests demonstrate that it’s feasible to use the conductance sensor in the measurements of oil- gas-water three-phase flow.

Measuring Research on County Agricultural Technological Innovation Ability Index

Taking the mechanism of technological construction guidance theory and mode which consists of "objective-construction-evaluation-construction-objective" as a starting point, on the basis of county agricultural technological innovation ability and its index definition, this paper researches the constructing system of county agricultural technological innovation ability. Firstly, on the basis of defining county agricultural technological innovation ability and the definition of index, according to the principle of purposefulness, scientificity, systematicness, integration of dynamic state and static state, integration of quantitativeness and qualitativeness and so on, we construct the multi-level measuring system of county agricultural technological innovation ability, including 4 first-level indices, namely technological innovation environment, technological innovation basis, technological innovation ability, and technological innovation efficiency; 15 second-level indices, such as technological policy, technological system mechanism, technological institution construction, ability of innovation subject, ability of industrial expansion, scale merit, technological contribution rate. Moreover, this system has 45 third-level indices. Then, by using unascertained mathematics method and AHM method, we establish the multi-level unascertained composite measuring model of county agricultural technological innovation ability index. Finally, by using the survey data of one county in Hebei Province, and the established county agricultural technological innovation ability index model, we get the county agricultural technological innovation ability index of 0.711 by calculation, that is, the innovation ability is at the intermediate level, namely the modern agricultural sub-stage. The empirical research proves the correctness and applicability of this model.

Eigenvalue Modeling and Cross-Correlation Analysis for 6. 0- 6. 4 GHz MIMO Channel

In Multiple-Input Multiple-Output( MIMO) system, the number of positive channel matrix eigenvalues is directly related to system performance. In order to characterize and model channel matrix eigenvalues,channel measurements at 6. 0- 6. 4GHz by using 4 × 4 MIMO structure were conducted in a typical classroom environment. Based on measured data, the eigenvalues were modeled as Log-Normal distributed random variables and parameterized. Furthermore, Cross-Correlation( CC) coefficients of eigenvalues were estimated. The measurement results show that,under both Light-Of-Sight( LOS) and NonLight-Of-Sight( NLOS) scenarios,eigenvalues are highly de-correlated so that CC can be ignored for eigenvalue model.